During what intervals was Jenny positively accelerating?
Answer:
3:00 - 3:02 and 3:07 - 3:08
Explanation:
Those are the only intervals in which Jenny's speed increased.
Answer and Explanation:
To know where Jenny was positively accelerating, we have to find where the slopes on the graph are increasing (in the positive direction).
By looking at the graph, we can see that at the intervals:
3:00 to 3:02 and 3:07 to 3:08
Jenny was positively accelerating, as there is an increase in speed during these time intervals.
#teamtrees #PAW (Plant And Water)
I hope this helps!
help me with this one
Answer:
Explanation:
2. a
3. c
Which is an example of current electricity?
Answer:
D
Explanation:
i just did it trust me
Which two statements are true about a system?
a)A system is a group of objects analyzed as one unit.
b)Energy that moves across system boundaries is conserved.
c)There’s only one way to define the boundaries of a system.
d)All systems are made by humans.
Bagaimanakah pelembapan bagi suatu sistem ayunan dapat diatasi dengan resonans?
Answer:
Those reaction in which one element replaces another element form its place is called Single displacement reaction
Highlight two factors which shows that heat from the sun does not reach the earth surface by convection
Answer:
Explanation:
The heat from the Sun gets to the surface of the Earth by radiation and not by convection because:
i. Radiation does not require material medium for its propagation: Since the space between the Sun and Earth is a vacuum ( i.e it is an empty space), then the only method for the heat from to Sun to get to the Earth is by radiation. This method does not require a material medium, while convection is a method that requires material medium for its propagation.
ii. Radiation occurs without heating the intervening medium: During the propagation of the heat from the Sun to the Earth, the space between the two heavenly bodies is not heated up. Some fraction of the heat after hitting the surface of the Earth get reflected back into the Earth's atmosphere. While in convection, the medium would have been heated up in the process.
10 m/s 2 the acceleration of moving vehide is What does it mean? ?
10m/s^2 acceleration means the vehicle changes its speed from a particular time to 10m/s ahead in 1s
Acceleration:-
The rate of change of velocity is called Acceleration.
SI unit of acceleration is m/s^2
[tex]\boxed{\ulcorner\sf Acceleration=\dfrac{v-u}{t}}[/tex]
v represents final velocity.u represents initial velocity.t denotes to timeA person climbs out of swimming pool and stands in the open air.Explain why evaporation of water from the surface of the persons body causes the person to feel cold
Answer:
The person feels cool at first because the swimming pool water is usually cool and he/she has that water on his body. But when it evaporates, the cool air directly touches his body and that's why he/she feels cold.
Thank You! Please mark me Brainliest!
A particle makes 800 revolution in 4 minutes of a circle of 5cm. Find
i. it's period
ii. Angular Velocity
iii. Linear Velocity
iv. It's acceleration
PLEASE FORMULAE SHOULD BE WRITTEN CLEARLY.
YOU CAN SNAP AND SEND
Answer:
i) The period of the particle is 0.3 seconds
ii) The angular velocity is approximately 20.94 rad/s
iii) The linear velocity is approximately 1.047 m/s
iv) The centripetal acceleration is approximately 6.98 m/s²
Explanation:
The given parameters are;
The number of revolution of the particle, n = 800 revolution
The time it takes the particle to make 800 revolutions = 4 minutes
The dimension of the circle = 5 cm = 0.05 m
Given that the dimension of the circle is the radius of the circle, we have;
i) The period of the particle, T = The time to complete one revolution
T = 1/(The number of revolutions per second)
∴ T = 1/(800 rev/(4 min × 60 s/min)) = 3/10 s
The period, T = 3/10 seconds = 0.3 seconds
ii) The angular velocity, ω = Angle covered/(Time)
800 revolutions in 4 minutes = Angle of (800 × 2·π) in 4 minutes
∴ ω = (800 × 2·π)/(4 × 60) = 20·π/3
The angular velocity, ω = 20·π/3 rad/s ≈ 20.94 rad/s
iii) The linear velocity, v = r × ω
∴ The linear velocity, v = 0.05 m × 20·π/3 rad/s = π/3 m/s ≈ 1.047 m/s
iv) The centripetal acceleration, [tex]a_c[/tex] = v²/r
∴ The centripetal acceleration, [tex]a_c[/tex] = (π/3)²/(0.05) = 20·π/9
The centripetal acceleration, [tex]a_c[/tex] = 20·π/9 m/s² ≈ 6.98 m/s²
When should a line graph be used?
A. When the independent variable is continuous and shows a causal link to the dependent variable.
B. When the independent variable is composed of categories and does not show a relationship.
C. When there is no independent variable.
D. When the independent variable is continuous and does not show a relationship to the dependent variable.
Answer:
A. When the independent variable is continuous and shows a causal link to the dependent variable.
Explanation:
A graph can be defined as the graphical representation of data (informations) on horizontal and vertical lines i.e x-axis and y-axis respectively.
In an experiment , the variable being manipulated by an experimenter is known as an independent variable while the dependent variable is the event expected to change when the independent variable is manipulated
Generally, a line graph should be used when the independent variable is continuous and shows a causal link to the dependent variable.
This ultimately implies that, a line graph should be used when the data changes continuously over time and as such there exist a linear relationship between the data (variables).
Which word describes the maximum a point moves from its rest position when a wave passes?
Answer:
Amplitude.
Explanation:
A wave can be defined as a disturbance in a medium that progressively transports energy from a source location to another location without the transportation of matter.
In Science, there are two (2) types of wave and these include;
I. Electromagnetic waves: it doesn't require a medium for its propagation and as such can travel through an empty space or vacuum. An example of an electromagnetic wave is light.
II. Mechanical waves: it requires a medium for its propagation and as such can't travel through an empty space or vacuum. An example of a mechanical wave is sound.
An amplitude can be defined as a waveform that's measured from the center line (its origin or equilibrium position) to the bottom of a trough or top of a crest.
Hence, an amplitude is a word that describes the maximum displacement a point moves from its rest position when a wave passes.
On a graph, the vertical axis (y-axis) is the amplitude of a waveform and this simply means that, it's measured vertically.
Mathematically, the amplitude of a wave is given by the formula;
x = Asin(ωt + ϕ)
Where;
x is displacement of the wave measured in meters.
A is the amplitude.
ω is the angular frequency measured in rad/s.
t is the time period measured in seconds.
ϕ is the phase angle.
in what condition does a body float
Answer:
if buoyant force is equal is equal to the weight of body then our body float. if density of our body is less than density of liqiud then our body float in water.
a boat ended up with a velocity of 30.m/s [N30.E] after it experienced an acceleration of 3.0m/s^2 [S] for a period of 4.0s what displacement did the boat cover
Answer:
96 m
Explanation:
The average velocity over those 4 seconds is the velocity after 2 seconds:
30 m/s -(2 s)(3.0 m/s^2) = 24 m/s
The displacement is the product of this average velocity and the duration of the acceleration:
d = (24 m/s)(4 s) = 96 m
The boat covered 96 m while being accelerated.
HELP!!
A particular electric car is supplied with 300 kJ of chemical energy by the battery. Of this, a total of 70.5 kJ of energy is wasted as heat.
Calculate the overall efficiency of the electric car.
[tex]\\ \sf\longmapsto 300-70.5=229.5kJ[/tex]
We know
[tex]\boxed{\sf Efficiency=\dfrac{Used\:Energy}{Supplied\:Energy}\times 100}[/tex]
[tex]\\ \sf\longmapsto Efficiency=\dfrac{229.5}{300}\times 100[/tex]
[tex]\\ \sf\longmapsto Efficiency=\dfrac{229.5}{3}[/tex]
[tex]\\ \sf\longmapsto Efficiency=76.5\%[/tex]
HELP ME PLEASE PLEASE
Answer:
b
Explanation
vector is in x direction
Answer:
B. b
its the only vector that reaches up to 3 of the X axis.
Como surgiu a capoeira?
A sample of Radon-222 has a half-life of 3.82 days. After 11.46 days, there is 5 grams of Radon-222 remaining. How much Radon-222 was in the original sample?
30 grams
2 grams
15 grams
40 grams
A 750 kg National Geographic Drone is rising vertically up into the atmosphere at constant speed. The lift force pushing it upward is 125% of its weight. The drone reaches the cruising speed almost immediately. It takes 25 seconds for the drone to reach a height of 250m starting from the surface.
a. What is the mechanical energy of the drone at the surface?
b. What is the mechanical energy of the drone at the 150 m height?
c. Is the mechanical energy of the drone conserved, increased, or decreased. Explain your choice.
d. What is the work done by each force acting on the drone?
Answer:
a. 0
b. 1.103625 MJ
c. Conserved
d. 1.103625/n MJ where n = The number of forces
Explanation:
The mass of the drone, m = 750 kg
The upward lift force = 125% of the weight of the drone
The time it takes the drone to reach a height of 250 m = 25 seconds
a. The mechanical energy = The kinetic energy + Potential energy
Therefore, given that the drone stars motion from the surface and was initially at rest, the mechanical energy at the surface = 0
b. The mechanical energy at height, h = 150 m, ME₁₅₀ = The potential energy gained = m·g·h
Where;
g = The acceleration due to gravity = 9.81 m/s²
∴ ME₁₅₀ = 750 kg × 9.81 m/s² × 150 m = 1103625 J = 1.103625 MJ
c. The mechanical energy is equivalent to the potential energy of the drone at the 150 m height, therefore, it is conserved
d. The work done by the force = The energy gained
Therefore, where there are n number of forces, the work done by each force = 1.103625/n MJ
Momentum is a quantity that we say is typically _______________ in collisions.
A. Conserved
B. Lost
C. Disappeared
D. Gained
Momentum is a quantity that we can say is typically conserved in collisions.
Momentum is the quantity that that we see typically conserve in the collision,therefore the correct answer is the option A
It is the type of collision in which the total momentum as well as the kinetic energy on the system is conserved .The momentum before the collision is equal to the momentum after the collision in other words one can say in the elastic collision momentum of the quantity is conserved.
In the inelastic collision the momentum is conserved but the kinetic energy of the quantity is not conserved.
Momentum of a quantity is conserved irrespective of the type of collision whether it will be elastic collision or inelastic collision the momentum of the quantity will always be conserved.
Hence,we can say that momentum is the quantity that is conserved in collision,The correct answer for the given problem is option A.
Learn more about the collision and from here
https://brainly.com/question/2356330
#SPJ2
when an apple falls towards the earth the earth moves up to meet the apple. Is it true? If yes, why is the earth motion not noticeable ?
Answer:
Yes, this is true.
-- While the apple is falling, the same gravitational force acts on both the apple and the Earth.
-- The mass of the apple is somewhere in the neighborhood of 1/4 kg.
-- The mass of the Earth is about 5.972 x 10²⁴ kg.
-- Since the Earth has roughly 2.389 x 10²⁶ times as much mass as the apple has, the apple has roughly 2.389 x 10²⁶ greater acceleration than the Earth has, and moves roughly 2.389 x 10²⁶ times as far down as the Earth moves up, before they smack together.
-- That's why you don't notice the Earth's motion.
-- Also, you're standing on the Earth, moving up with it, toward the apple. Maybe it would be different if you were sitting on the apple, riding it down to the ground, and you were able to notice the motion of the ground coming up to meet you at a speed that's 0.00000000000000000000000000419 of YOUR speed.
Answer From Gauth Math
What type of sound do the thinner
strings on a guitar make?
A. Higher pitched sounds
B. Lower pitched sounds
C. Loud sounds
D. Quiet sounds
Answer:
d
Explanation:
I'm not perfectly sure so check again
why a magnetic compass is used to determine the direction.
Answer:
the magnetic compass is used to determine direction because it is one of the most accurate form of magnet as we already know that a freely suspended magnet always faces towards north direction and south direction
The energy required to change the state of a substance was determined to be E(H).
If the mass of the substance was DOUBLED, the value of E(H) will
(A) be halved
(B) be doubled
(C) be quadrupled
(D) remain constant
Answer:
ccccccccc or bbbbbbb or aaaaaaaa or ddddddd
HELP ME
Which two changes to the can opener would increase its mechanical efficiency?
A shorten the paddle so that they are closer in size to the axle that they turn
B grease the rotating wheel of the opener so that there is less breaks in between moving parts
C replaced it with a straight handle the act as levers with shorter pieces of metal
D sand the cutting surface of the metal piece so that it is perfectly smooth and sharp
Answer:
I THINK IT'S D....
HOPE SO
Which direction do electrons travel
A.from negative to positive
B.in either direction depending on the circuit
C.from positive to negative
D.they don’t move they simply exchange charge
Answer:
option a negative to positive
Explanation:
The flow of electrons is termed electron current. Electrons flow from the negative terminal to the positive. Conventional current or simply current, behaves as if positive charge carriers cause current flow. Conventional current flows from the positive terminal to the negative
brainliest plsss
the weight of a body is 420 newton.calculate it's mass
Answer:
42g
Explanation:
the mass of a body is given by
m=weight/gravity
=420/10
=42
I hope this helps
1. Imagine a bowling ball with a mass of 5,0 kg that is dropped from a height of 100m,
a. At the moment the bowling ball is dropped it is at a height of 100m, What is its
potential energy?
b. At the moment the bowling ball is dropped, it is not yet moving. Therefore, its
kinetic energy is what?
c. What is the total of both potential and kinetic energy?
a.
Given,
height (h) = 100m
mass (m) = 5kg
acceleration due to gravitation (g) = 9.8ms^-2
Potential energy
= mgh
= 5kg × 9.8ms^-1 × 100m
= 4900 kgm²s^-2
= 4900 J
b.
Since the ball is not moving yet, its kinetic energy is 0.
c.
The total of potential and kinetic energy at every point of the journey is same, i.e., 4900 J.
A bullet of mass of 50g is moving with the velocity of 200km/h .calculate the kinetic energy of the bullet .
Answer:
is 10³
Explanation:
cuz the formula of KE is 1/2mv²
covert 50g to kg first then plug in the formula
1/2 × 0.05 × 200 = 10³ J
Define electric current and drift velocity.
Answer:
Current- the flow of free charges, such as electrons and ions
Drift velocity- the average speed at which these charges move
Answer:
An electric current is the stream of changed particals, such as electrons & ions, moving through an electrical conductor.
The average velocity attained bycharged partical ,such as electrons,in a material due to electric fields
what's is acceleration. ?????
Answer:
Acceleration, rate at which velocity changes with time, in terms of both speed and direction. A point or an object moving in a straight line is accelerated if it speeds up or slows down. ... Acceleration is defined as the change in the velocity vector in a time interval, divided by the time interval.
Answer:
The rate of change in velocity with time A=finall velocity _intial velocity upon time
