What type of wave is a microwave?
O heat
O longitudinal
sound
transverse

Answers

Answer 1

Answer:

Microwave is a types of a electromagnetic radiation

Answer 2

Answer:

Transvers

Explanation:

Because microwave is electromagnetic  waves and all electromagnetic waves are transvers.


Related Questions


Physics question plz help ASAP

Answers

The Correct answer is D Hope this helps :)

Four identical balls are thrown from the top of a cliff, each with the same speed. The
first is thrown straight up, the second is thrown at 30° above the horizontal, the third
at 30° below the horizontal, and the fourth straight down. How do the speeds and
kinetic energies of the balls compare as they strike the ground? Ignore the effects of
air resistance. Explain fully using the concepts from this unit.

Answers

The comparison of the speeds and kinetic energy of the identical balls are as follows

The speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

The reason for the above comparison results areas follows;

Known parameters;

First ball is thrown straight up

Second ball is thrown 30° above the horizontal

Third ball it thrown 30° below the horizontal

The fourth ball is thrown straight down

Unknown:

Comparison of the speed and kinetic energy of the four balls

Method:

The kinetic energy, K.E. = (1/2) × m × v²

The velocity of the ball, v = u × sin(θ)

Where;

u = The initial velocity of the ball

θ = The reference angle

For the first ball thrown straight up, we have;

θ = 90°

∴ [tex]v_y[/tex] = u

The final velocity of the ball as it strikes the ground is v₂ = u² + 2gh

Where;

h = The height of the cliff

∴ Kinetic energy of first ball, K.E.₁ = (1/2) × m × (u₁² + 2gh)²

For the second ball thrown 30° to the horizontal, we have;

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy  K.E.₂ = (1/2) × m × ((0.5·u₂)² + 2·g·h)²

For the third ball thrown at 30° below the horizontal, we have;

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy K.E.₃ = (1/2) × m × ((0.5·u₃)² + 2·g·h)²

For the fourth ball thrown straight down, we have;

Kinetic energy K.E.₄ = (1/2) × m × (u₄² + 2gh)²

Therefore, as the ball strike the ground, the speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

u₁ = u₄, K.E₁ = K.E.₄, u₂ = u₃, K.E₂ = K.E.₃

Learn more about object kinetic energy of objects in free fall here;

https://brainly.com/question/14872097

If the mass of an object is 15 kg and the velocity is -4 m/s, what is the momentum?

Answers

momentum p= m x v = 15 x -4 = -60 N.s

A cycle track is 500 metres long. A cyclist completes 10 laps (that is, he rides completely round the track 10 times).
a) How many kilometres has the cyclist travelled?
b) On average it took the cyclist 50 second to complete one lap (that it, to ride round just one).
(i) What was the average speed of the cyclist?
(ii) How long in minutes and seconds dit it take the cyclist to complete the 10 laps?
c) Near the end of the run the cyclist put on a spurt. During this spurt it took the cyclist 2 seconds to increase speed from 8 m/s to 12 m/s. What was the cyclist's acceleration during this spurt?

Answers

Explanation:

a) D_t = 500m*10laps

D_t = 5000m or 5km

b)

I) v = d/t

v = 500m/50s

v = 10m/s

ii) 10m/s = 5000m/t

t = 5000m/10m/s

t = (500s)*(1min/60s)

t = 8'20" or 8 mins and 20 sec

c) v_f = v_0 + a*t

v_f-v_0 = a*t

a = (v_f-v_0)/t

a = (12m/s-8m/s)/2s

a = (4m/s)/2s

a = 2m/s²

Part(a),

The distance travelled by the cyclist is 5 km.

Part(b),

(i) The average speed is 10 m/s

(ii) The time taken to cover 10 laps is 8 minutes and 20 seconds.

Part(c),

The acceleration is 2 m/s²

What is speed?

Speed is defined as the ratio of the time distance travelled by the body to the time taken by the body to cover the distance. Speed is the ratio of the distance travelled by time. The unit of speed in miles per hour.

a) The distance will be calculated as

D = 500m*10laps

D = 5000m or 5km

b) The average speed is calculated as,

I) v = d/t

v = 500m/the 50s

v = 10m/s

The time will be calculated as,

ii) 10m/s = 5000m/t

t = 5000m/10m/s

t = (500s)*(1min/60s)

t = 8'20" or 8 mins and 20 sec

The acceleration is calculated as,

c) vf = v0 + at

vf-v0 = at

a = (vf-v0)/t

a = (12m/s-8m/s)/2s

a = (4m/s)/2s

a = 2m/s²

To know more about speed and acceleration follow

https://brainly.com/question/14344386

#SPJ2

Outside a spherically symmetric charge distribution of net charge Q, Gauss's law can be used to show that the electric field at a given distance:___________.
A) must be directed inward.
B) acts like it originated in a point charge Q at the center of the distribution.
C) must be directed outward.
D) must be greater than zero.
E) must be zero.

Answers

Answer:

Q at the center of the distribution.

Explanation:

The Gauss's law is the law that relates to the distribution of electrical charges to the resulting electrical field. It states that a flux of electricity outside the arabatory closed surface is proportional to the electricitical harg enclosed by the surface.

given A=4i-10j and B= 7i+5j find b such that A+bB is a vector pointing along the x-axis (i.e has no y component)​

Answers

Answer:

-4/7

Explanation:

Given the following

A=4i-10j and B= 7i+5j

A+ bB = 4i-10j + (7i+5j)b

A+ bB =  4i-10j + 7ib+5jb

A+ bB =

The vector along the x-axis is expressed as i + 0j

If the vector A+ bB is pointing in the direction of the x-axis then;

[tex]A+ bB * \frac{i+0j}{|i+0j|} = 0 \\ (4+7b)i-(10-5b)j* \frac{i+0j}{\sqrt{1^2+0^2} } = 0\\(4+7b)i-(10-5b)j *(i+0j) = 0\\4+7b-0 =0\\7b=-4\\b = -4/7[/tex]

Hence the value of b is -4/7

The value of [tex]\beta[/tex] such that [tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] is 2.

According to the statement, we have following system of vectorial equations:

[tex]\vec A = 4\,\hat {i} - 10\,\hat{j}[/tex] (1)

[tex]\vec {B} = 7\,\hat{i} + 5\,\hat{j}[/tex] (2)

[tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] (3)

By applying (1) and (2) in (3):

[tex](4\,\hat{i}-10\,\hat{j}) + \beta\cdot (7\,\hat{i}+5\,\hat{j}) = c\,\hat{i}[/tex]

[tex](4+7\cdot \beta)\,\hat{i} +(-10+5\cdot \beta)\,\hat{j} = c\,\hat{i}[/tex]

And we get two scalar equations after analyzing each component:

[tex]4+7\cdot \beta = c[/tex] (4)

[tex]-10+5\cdot \beta = 0[/tex] (5)

We solve for [tex]\beta[/tex] in (5):

[tex]\beta = 2[/tex]

And for [tex]c[/tex] in (4):

[tex]c = 4+7\cdot (2)[/tex]

[tex]c = 18[/tex]

The value of [tex]\beta[/tex] such that [tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] is 2.

Please see this question related to Sum of Vectors for further details: https://brainly.com/question/11881720

A 2.0 kg puck is at rest on a level table. It is pushed straight north with a constant force of 5N for 1.50 s and then let go. How far does the puck move from rest in 2.25 s?

Answers

Answer:

d = 6.32 m

Explanation:

Given that,

The mass of a puck, m = 2 kg

It is pushed straight north with a constant force of 5N for 1.50 s and then let go.

We need to find the distance covered by the puck when move from rest in 2.25 s.

We know that,

F = ma

[tex]a=\dfrac{F}{m}\\\\a=\dfrac{5}{2}\\\\a=2.5\ m/s^2[/tex]

Let d is the distance moved in 2.25 s. Using second equation of motion,

[tex]d=ut+\dfrac{1}{2}at^2\\\\d=0+\dfrac{1}{2}\times 2.5\times (2.25)^2\\\\d=6.32\ m[/tex]

So, it will move 6.32 m from rest in 2.25 seconds.

Our system is a block attached to a horizontal spring on a frictionless table. The spring has a spring constant of 4.0 N/m and a rest length of 1.0 m, and the block has a mass of 0.25 kg.

Compute the PE when the spring is compressed by 0.50 m.

Answers

Answer

E - 1/2 K x^2      potential energy of compressed spring

E = 1/2 * 4 N / m * (.5 m)^2 = 2 * .5^2 N-m = .5 N-m

A parallel plate capacitor creates a uniform electric field of and its plates are separated by . A proton is placed at rest next to the positive plate and then released and moves toward the negative plate. When the proton arrives at the negative plate, what is its speed

Answers

Complete Question

A parallel plate capacitor creates a uniform electric field of 5 x 10^4 N/C and its plates are separated by 2 x 10^{-3}'m. A proton is placed at rest next to the positive plate and then released and moves toward the negative plate. When the proton arrives at the negative plate, what is its speed?

Answer:

[tex]V=1.4*10^5m/s[/tex]

Explanation:

From the question we are told that:

Electric field [tex]B=1.5*10N/C[/tex]

Distance [tex]d=2 x 10^{-3}[/tex]

At negative plate

Generally the equation for Velocity is mathematically given by

[tex]V^2=2as[/tex]

Therefore

[tex]V^2=\frac{2*e_0E*d}{m}[/tex]

[tex]V^2=\frac{2*1.6*10^{-19}(5*10^4)*2 * 10^{-3}}{1.67*10^{-28}}[/tex]

[tex]V=\sqrt{19.2*10^9}[/tex]

[tex]V=1.4*10^5m/s[/tex]

a coach is travelling east wards at 12.6 m/s after 12 second its velocity is 9.5 m/s in the same direction. what is the acceleration and direction of its acceleration?

pls do it with the formula
thx mates :)​

Answers

Initial velocity=u=12.6m/sFinal velocity=9.5m/sTime=t=12sAcceleration be a

[tex]\\ \rm\longmapsto a=\dfrac{v-u}{t}[/tex]

[tex]\\ \rm\longmapsto a=\dfrac{12.6-9.5}{12}[/tex]

[tex]\\ \rm\longmapsto a=\dfrac{3.1}{12}[/tex]

[tex]\\ \rm\longmapsto \overrightarrow{a}=0.25m/s^2[/tex]

which of the following cannot be increased by using a machine of some kind? work, force, speed, torque

Answers

Explanation:

Work cannot be increased by using a machine of some kind.

Work cannot be increased by using a machine of some kind.

A machine is any device in which the effort applied at one end overcomes a load at the other end.

Machines are generally used to perform different tasks faster.

However, a simple machine can not be used to increase the amount of work done at any time.

Force, speed and torque can all be increased using machines.

Learn more: https://brainly.com/question/15365822

During normal beating, the heart creates a maximum 4.10-mV potential across 0.350 m of a person's chest, creating a 1.00-Hz electromagnetic wave. (a) What is the maximum electric field strength created? V/m (b) What is the corresponding maximum magnetic field strength in the electromagnetic wave? T (c) What is the wavelength of the electromagnetic wave?

Answers

Explanation:

Given that,

Maximum potential, V = 4. mV

Distance, d = 0.350 m

Frequency of the wave, f = 100 Hz

(a) The maximum electric field strength created is given by:

[tex]E=\dfrac{V}{d}\\\\E=\dfrac{4.1\times 10^{-3}}{0.350 }\\\\E=0.0117\ V/m[/tex]

(b) The corresponding maximum magnetic field strength in the electromagnetic wave is given by :

[tex]B=\dfrac{E}{c}\\\\B=\dfrac{0.0117}{3\times 10^8}\\\\B=3.9\times 10^{-11}\ T[/tex]

(c) The wavelength of the electromagnetic wave can be calculated as :

[tex]\lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{3\times 10^8}{100}\\\\=3\times 10^6\ m[/tex]

So, the wavelength of the electromagnetic wave is [tex]3\times 10^6\ m[/tex].

An object moving with a constant
acceleration changes its velocity from
10ms' to 20 ms' in five seconds. What is the
distance travelled in five seconds ​

Answers

Answer:

Acceleration:

[tex]{ \tt{a = \frac{v - u}{t} }} \\ { \tt{a = \frac{20 - 10}{5} }} \\ { \tt{a = 2 \: m {s}^{ - 2} }}[/tex]

From third equation:

[tex]{ \bf{ {v}^{2} = {u}^{2} + 2as}} \\ { \tt{s = \frac{ {20}^{2} - {10}^{2} }{2 \times 2} }} \\ = { \tt{s = 75 \: m}}[/tex]

Answer:

Formula = m/s

Explanation:

The answer is 10 m / 5 seconds = 2 meters distance

The answer is 20 m / 5 seconds = 4 meters distance

a student standing between two walls shouts once.he hears the first echo after 3 seconds and the next after 5 seconds. calculate the distance between the walls.​

Answers

Explanation:

It took [tex]t_1 =1.5\:\text{s}[/tex] for the sound to reach the 1st wall and at the same time time, the same sound took [tex]t_2 = 2.5\:\text{s}[/tex] to reach the 2nd wall. Assuming that the sound travels at 343 m/s, then let [tex]x_1[/tex] be the distance of the person to the 1st wall and [tex]x_2[/tex] be the distance to the 2nd wall. So the distance between the walls X is

[tex]X = x_1 + x_2 = v_st_1 + v_st_2 = v_s(t_1 + t_2)[/tex]

[tex]\:\:\:\:\:= (343\:\text{m/s})(4.0\:\text{s}) = 1372\:\text{m}[/tex]

what is meant by specific latent heat of vaporization of water is -2.26mjkg^-1 or -2.26mj/kg?​

Answers

Answer:

The specific latent heat of a substance is the amount of energy required to change the state of one kilo of the substance without change in it temperature.The latent heat of vaporization or evaporation is the heat given to some mass to convert if from the liquid to the vapor phase.

Megan accelerates her skateboard from 0 m/s to 8 m/s in 2 seconds. What is the magnitude of the acceleration of the skateboard?
O 8 m/s^2
O 16 m/s^2
O 2 m/s^2
O 4 m/s^2​

Answers

Answer:

chk picture for eqn

Explanation:

The potential difference between the plates of a capacitor is 234 V. Midway between the plates, a proton and an electron are released. The electron is released from rest. The proton is projected perpendicularly toward the negative plate with an initial speed. The proton strikes the negative plate at the same instant the electron strikes the positive plate. Ignore the attraction between the two particles, and find the initial speed of the proton.
I have tried looking at the cramster.com solution manual and do not like the way it is explained. Simply put, I cannot follow what is going on and I am looking for someone who can explain it in plain man's terms and help me understand and get the correct answer. I am willing to give MAX karma points to anyone who can help me through this. Thank you kindly.

Answers

Answer:

The speed of proton is 2.1 x 10^5 m/s .

Explanation:

potential difference, V = 234 V

let the initial speed of the proton is v.

The kinetic energy of proton is

KE = q V

[tex]0.5 mv^2 = e V \\\\0.5\times 1.67\times 10^{-27} v^2 = 1.6\times 10^{-19} \times 234\\\\v=2.1\times 10^5 m/s[/tex]


The temperature of a body falls from 30°C to 20°C in 5 minutes. The air
temperature is 13°C. Find the temperature after a further 5 minutes.

Answers

Answer:

15.88°C I am not 100% sure this is right but I am 98% sure this IS right

An object is acted upon by two and only two forces that are equal magnitude and oppositely directed. Is the objected necessarily in static equilibrium? Explain. You can draw a picture if that helps explain.

Answers

Answer:

the body is subjected to a continuous rotation and the body is not in rotational equilibrium

Explanation:

For an object to have a static equilibrium, it must meet two relationships

             ∑ F = 0

             ∑ τ =0              

force acting on a body fulfills the relation of

         sum F = F - F = 0

when two forces do not move from position.

To find the torque we assume that the counterclockwise rotations are positive

        Σ τ = - F r - F r

        Στ = -2 Fr <> 0

consequently the body is subjected to a continuous rotation and the body is not in rotational equilibrium

what additional load will be required to cause the extension of 2.0cm when an elastic wire extend by 1.0cm when a load of 20g range from it

Answers

Answer:

The additional load is 20g

A bicyclist moves along a straight line with an initial velocity vo and slows downs. Which of the following the best describes the signs set for the initial position, initial velocity and the acceleration ?​

Answers

The sign set after the slowdown of the bicycle will be positive for the position,  negative for velocity, and negative for acceleration.

What is velocity?

The rate at which an object's position changes when observed from a specific point of view and when measured against a specific unit of time is known as its velocity.

According to Que, when a bicyclist moves in a straight line and slows down, then the velocity decrease as displacement is decreasing, and the acceleration also decreases only displacement increases.

Therefore, the sign set for the position is +ve, for velocity it is -ve, and for acceleration also -ve

To know more about Velocity:

https://brainly.com/question/19979064

#SPJ1

A biker slows down after traveling in a long, straight line at initial velocity v0. Which of the following the best \sdescribes the signs set for the initial position, initial velocity and the acceleration? Initial position Initial velocity Acceleration

A. Positive Negative Negative

B. Positive Positive Negative

C. Negative Positive Negative

D. Negative Negative Positive

E. Negative Negative Negative

what is the value of x if x-36=5?​

Answers

Answer:

Therefore, the value of x is 41

Explanation:

x=5+36

x=41

a person lifts 60kg on the surface of the earth, how much mass can he lift on the surface of the moon if he applies same magnitude of force​

Answers

Explanation:

Hey there!

According to the question;

A person can lift mass of 60 kg on earth.

mass(m1) = 60kg

acceleration due to gravity on earth (a) = 9.8m/s²

Now;

force (f) = m.a

= 60*9.8

= 588 N

Since, there is application of same magnitude of force on moon,

mass(m) =?

acceleration due to gravity on moon (a) = 1.67m/s²

Now;

force (f) = m.a

588 = m*1.67

m = 352.09 kg

Therefore, the person who can lift the mass of 60 kg on earth can lift mass of 352 kg on moon.

Hope it helps!

Flag question
Consider the pressure and force acting on the
dam retaining a reservoir of water. Suppose the
dam is 500-m wide
and the water is 80.0-m
deep at the dam, as illustrated below. What is
the average pressure on the dam due to the
water?​

Answers

Answer:

P = density (p) * g * h

P = 1000  kg/m^3 * 9.8 m/s^2 * 40 m = 392,000 N/m^2

since kg m / s^2 = Newtons

The average pressure is 1/2 (pressure at 0m +  pressure 80 m) for liquid of uniform density

A 771.0-kg copper bar is melted in a smelter. The initial temperature of the copper is 300.0 K. How much heat must the smelter produce to completely melt the copper bar? For solid copper, the specific heat is 386 J/kg • K, the heat of fusion is 205 kJ/kg, and the melting point is 1357 K.

Answers

Answer:

4.73 × 10^5

Explanation:

the lamp cord is 85cm long and comprises cupper wire. Calculate the wire‘s resistance?
radius of a wire is 1.8mmm,Use value of resistivity for Cu as 1.75 × 10-8Ωm.

Answers

Answer:

R = 0.0015Ω

Explanation:

The formula for calculating the resistivity of a material is expressed as;

ρ = RA/l

R is the resistance

ρ is the resistivity

A is the area of the wire

l is the length of the wire

Given

l = 85cm = 0.85m

A = πr²

A = 3.14*0.0018²

A = 0.0000101736m²

ρ = 1.75 × 10-8Ωm.

Substitute into the formula

1.75 × 10-8 = 0.0000101736R/0.85

1.4875× 10-8 = 0.0000101736R

R = 1.4875× 10-8/0.0000101736

R = 0.0015Ω

Where is the center of mass of homogeneous body which has a regular ​

Answers

Following the definition of the center of mass, "In physics, the center of mass of a distribution of mass in space is the unique point where the weighted relative position of the distributed mass sums to zero."

(see explanation below)

A 55kg bungee jumper has fallen far enough that her bungee cord is beginning to stretch and resist her downward motion . Find the ( magnitude and direction ) exerted on her by the bungee cord at an instant when her downward acceleration has a magnitude of 7.1m/s2​

Answers

Answer:

148.5 N

Explanation:

Given that,

The mass of a bungee jumper, m = 55 kg

The downward acceleration, a = 7.1 m/s²

We need to find the net force acting on the jumper. As it is moving in downward direction, net force is :

T = m(g-a)

Put all the values,

T = 55(9.8 - 7.1)

= 148.5 N

So, the force exerted on the bungee cord is 148.5  N.

Answer:

The downward force is 148.5 N.

Explanation:

mass, m = 55 kg

downwards acceleration, a = 7.1 m/s^2

Let the force is F.

According to the newton's second law

m g - F = m a

F = m (g - a)

F = 55 (9.8 - 7.1)

F = 148.5 N

Which of the following groups is the largest ?

population
community
ecosystem
biome

Answers

Answer:

B. Community

Took science classes for 6 years now

A gymnast weighs 450 N. She stands on a balance beam of uniform construction which weighs 250 N. The balance beam is 3.0 m long and is supported at each end. If the support force at the right end is four times the force at the left end, how far from the right end is the gymnast

Answers

Answer:

   x = 9.32 cm

Explanation:

For this exercise we have an applied torque and the bar is in equilibrium, which is why we use the endowment equilibrium equation

Suppose the counterclockwise turn is positive, let's set our reference frame at the left end of the bar

          - W l / 2 - W_{child} x + N₂ l = 0

             x = [tex]\frac{-W l/2 + n_2 l}{W_{child}}[/tex]             1)

now let's use the expression for translational equilibrium

         N₁ - W - W_(child) + N₂ = 0

indicate that N₂ = 4 N₁

we substitute

           N₁ - W - W_child + 4 N₁ = 0

           5 N₁ -W - W_{child} = 0

           N₁ = ( W + W_{child}) / 5

         

we calculate

           N₁ = (450 + 250) / 5

          N₁ = 140 N

           

we calculate with equation 1

           x = -250 1.50 + 4 140 3) / 140

           x = 9.32 cm

Other Questions
During a particularly dry growing season in a southern state, farmers noticed that there is a delicate balance between the number of seeds that are planted per square foot and the yield of the crop in pounds per square foot. The yields were the smallest when the number of seeds per square foot was either very small or very large.What is the explanatory variable for this relationship?yield of the croplocation of the farmprecipitation for the growing seasonnumber of seeds planted per square footI think it's (D).number of seeds planted per sf Please help me ill give brainliest!! In right triangle ABC, if AC = 5/13 and AB = 1, what is the length of BC? The circumference of a circle is 14 meters. Which of the following represents the area of the circle The difference between two positive integers is 7 and the sum of their squares is 949. What are the numbers? Write a conversation between two people sitting on stairs ! find the sum 38+39+40+41...+114+115 Which of the following would not help you understand a selection of world literature?A) geographical knowledge of the story's settingB) research into cultural customs of the story's settingC) stereotypes about people from the author's birthplaceD) knowledge of the history of the author's birthplaceTHANK YOU IN ADVANCE, I'D BE GLAD IF YOU COULD EXPLAIN IT! please HELP ME!!! (16 POINTS) due today :))) Maya just bought a refrigerator for $642. She paid $160.40 in a down payment and will pay the rest in 4 equal installments. How much does she need to pay for each installment? how many line of symmetry is this figure Why was the conflict between the United States and Soviet Unioncalled a "cold war"?Nuclear weapons were never used.The superpowers were "cold" to each other.All the fighting took place in "cold" country.Mushroom clouds changed the world climate. what are wavy features found on some sandstones? 8. The value of [3 - 4 * (3 - 4) ^ 4] ^ 3 is a) 1b) -1 c)0d) 7help me please Which of the following is an example of shape in Piet Mondrian's Composition with Red, Yellow, and Blue? The color red The color yellow The lines The rectangle What characteristics are needed to have a civilization? What are 5 uses of nitrogen? A circle is represented by the equation below:(x 9)2 + (y + 8)2 = 16Which statement is true?a) The circle is centered at (9, 8) and has a radius of 8.b) The circle is centered at (9, 8) and has a diameter of 8.c) The circle is centered at (9, 8) and has a radius of 8.d) The circle is centered at (9, 8) and has a diameter of 8. Which __________, this kind of seminar or computer based training? A. do you prefer B. did you prefer C. have you preferred D. has you preferred Larned Corporation recorded the following transactions for the just completed month.$79,000 in raw materials were purchased on account. $77,000 in raw materials were used in production. Of this amount, $65,000 was for direct materials and the remainder was for indirect materials. Total labor wages of $109,500 were paid in cash. Of this amount, $100,900 was for direct labor and the remainder was for indirect labor. Depreciation of $195,000 was incurred on factory equipment.Required:Record the above transactions in journal entries.