Answer:
ridge push and slab pull
Explanation:
there are two processes through to be responsible for the spreading seen at mid ocean ridges and there is some uncertainty as to which is dominant. ridge push occurs when the weight of the ridge pushes at the rest of tectonic plate away from the ridge often towards a subduction zone. hope this helped
Energy of motion is called ________energy *
Answer:
Kinetic - Kinetic energy is the energy of motion
Explanation:
Thermal energy - heat energy
Potential energy - energy that is stored
Hope this helped!
Have a supercalifragilisticexpialidocious day!
why do astronauts on the moon seem like they're "Walking on springs" while on earth we are firmly attached to the ground
what is rusting of iron?
Answer:
Rusting is an oxidation reaction. The iron reacts with water and oxygen to form hydrated iron(III) oxide, which we see as rust. Unlike rust, which can flake off the surface of iron and steel objects, the layer of aluminium oxide does not flake off.
Explanation:
The complete combustion of acetic acid, HC2H3O2(I) to form water, H2O(I), and CO2(g), at constant pressure releases 871.7 kJ of heat per mol of acetic acid.
Write a balanced thermochemical equation if 5.0g of acetic acid will be used in the reaction.
HC2H3O2(I) + O2 --- H2O(I) + CO2(g) H= -871.7 kJ
Answer:
HC2H3O2(I) + O2(g) ---> H2O(I) + CO2(g) ΔH= -72.35 kJ
Explanation:
We know that 5.0 g of acetic acid will contain, 5.0g/60 g/mol = 0.083 moles of acetic acid
Now from the reaction equation;
1 mole of acetic acid evolved -871.7 KJ of heat
0.083 moles of acetic acid will evolve 0.083 * -871.7 = -72.35 KJ
For 5.0 g of acetic acid, we can write;
HC2H3O2(I) + O2(g) ---> H2O(I) + CO2(g) ΔH= -72.35 kJ
Do the following ! I'LL MARK THE BRAINLEST!
ITS SCIENCE!
Answer:
it's easier to look it up
Explanation:
Low, gray, layered clouds that cover the sky and bring steady rain are O A. cumulus O B. cirrus O C. cumulonimbus OD. nimbostratus
Answer:
D Nimbostratus
Explanation:
Which of the following is not a unit of volume?
A
L
B
mL
C
m^3
3
D
cm^2
2
PLEASE ANSWER ASAP !! NEED THIS HANDED IN TN
Answer:
The orest one is possible D
Explanation:
C3Hg + 02 → CO2 + H2O
This chemical equation represents the combustion of propane. When correctly balanced, the coefficient for water
is
16.
2.
8.
4.
Answer:
4
Explanation:
The following equation, which depicts the combustion of propane, is given in this question as follows:
C3H8 + 02 → CO2 + H2O
However, this equation is not yet BALANCED because the number of atoms of each element is not the same on the reactant and product side. To balance the equation, we make use of COEFFICIENT to ensure that the number of atoms of each element on both side correlates.
The balanced equation is as follows:
C3H8 + 502 → 3CO2 + 4H2O
Therefore, the coefficient for water (H2O) after balancing the equation is 4.
The study of chemicals is called chemistry.
The correct answer is D.
The equation is not yet BALANCED because the number of atoms of each element is not the same on the reactant and product sides.
To balance the equation, we make use of COEFFICIENT to ensure that the number of atoms of each element on both sides correlates.
After balancing the equation is as follows:
[tex]C_3H_8 + 50_2 → 3CO_2 + 4H_2O[/tex]
Hence, the correct answer is 4 which shows the balanced water.
For more information, refer to the link:-
https://brainly.com/question/12985618
Hydrazine, N2H4, and hydrogen, H2O2, have been used as rocket propellants. They react according to the equation:
H2O2 + N2H4 → N2 + H2O
a. How many moles of N2 are formed from 0.0250 moles of N2H4? (0.0250)
b. How many moles of H2O2 are required if 1.35 moles of H2O is to be produced? (0.675)
c. How many moles of H2O are formed if 1.87 moles of N2 is produced? (7.48)
Explanation:
The equation of the reaction is;
H2O2 + N2H4 → N2 + H2O
Upon balancing the reaction, we have;
N2H4 + 2H2O2 → N2 + 4H2O
a. How many moles of N2 are formed from 0.0250 moles of N2H4?
From the equation of the reaction;
1 mol of N2H4 produces 1 mol of N2
0.0250 mol of N2H4 would produce x mol of N2
1 = 1
0.0250 = x
x = 0.0250 * 1 / 1 = 0.0250 mol
b. How many moles of H2O2 are required if 1.35 moles of H2O is to be produced?
From the equation of the reaction;
2 mol of H2O2 produces 4 mol of H2O
x mol of H2O2 produces 1.35 mol of H2O
2 = 4
x = 1.35
x = 1.35 * 2 / 4 = 0.675 mol
c. How many moles of H2O are formed if 1.87 moles of N2 is produced?
The relationship between H2O produced and N2 is;
For every 1 mol of N2 produced, 4 mol of H2O is produced
1.87 mol of N2 produced, how many moles of H2O is produced?
1 = 4
1.87 = x
x = 1.87 * 4 / 1 = 7.48 mol
An object has a volume of 825 cm3 and a density of 13.6 g/cm3. Find its
mass
The mass of an object is the product of its volume and density. The mass of a the object with a volume of 825 cm³ and a density of 13.6 g/cm³ is 11220 g.
What is density ?Density of substance is the measure of its mass per unit volume. It describes how closely its particles are packed. Density depends on the bond type, temperature and pressure.
Volume of the object is the space occupied by its particles. Volume can be expressed in L, ml, cm³, dm³ etc. Only solids and liquids has a definite volume and the volume of gases is that of the container.
Give that, volume of the object = 825 cm³
density = 13.6 g/cm³
Mass = volume × density
m = 825 cm³ × 13.6 g/cm³ = 11220 g
Therefore, the mass of the object is 11220 g.
Find more on density:
https://brainly.com/question/15164682
#SPJ2
C₃ H8
What is the subscript for carbon in this molecule?
Answer:
3
Explanation:
Subscript basically tells you the number of element or ions present in a compound. In this case the subscript of carbon which is 3 denotes that only three carbon atoms is present in the compound.
When a compound such as X2Z4 is created, what would be the
correct simplified chemical formula?
Answer:
XZ2
Explanation:
There are different ways in which compounds can be represented. Broadly, we have three different types of formula;
- Structural formular: This shows how th atoms in te compound are connected to each other.
- Molecular formular: This shows the actual number of atoms of element present in the compound
- Empirical Formular: This is the simplest formular of a compound. It basically shows the number of atoms in simple ration to each other.
This question requires us to input the empirical formular;
X2Z4
The ratio of the elements is; 2 : 4 which can be simplified into 1 : 2
This means the empirical formular is XZ2
In the laboratory you dissolve 12.7 g of silver fluoride in a volumetric flask and add water to a total volume of 125. mL. What is the molarity of the solution?
Answer:
Molarity = 2.4 M
Explanation:
Given data:
Mass of silver fluoride = 12.7 g
Volume of water = 125 mL (125 mL× 1 L /1000 mL = 0.125 L)
Molarity of solution = ?
Solution:
Number of moles of silver fluoride:
Number of moles = mass/molar mass
Number of moles = 12.7 g/ 41.98 g/mol
Number of moles = 0.30 mol
Molarity:
Molarity = number of moles of solute / volume in L
Molarity = 0.30 mol / 0.125 L
Molarity = 2.4 M
Put the levels of organization in order from smallest to largest
Organism
Community
Ecosystem
Population
The picture below is of oxygens bonded together. This forms a...
a) molecule
b) element
c) molecular compound
d) atom
Answer:
Explanation:
The picture shows two similar structures bonded together so it can not be an atom or molecular compound .
It is a molecule . Each structure ( lobe ) represents atom of oxygen . Molecule of oxygen contains two atoms bonded together .
Molecule of oxygen = O₂ .
Which ion forms the strongest ionic bond with a given anion?
Answer:
Explanation:
A cation with a 2+ charge will make a stronger ionic bond than a cation with a 1+ charge. A larger ion makes a weaker ionic bond because of the greater distance between its electrons and the nucleus of the oppositely charged ion.
What is the temperature change that 725 g of aluminum will undergo when 2.35 x 104
J of thermal energy are added to it?
Answer:
36°C
Explanation:
Given parameters:
Mass of aluminum = 725g
Quantity of heat = 2.35 x 10⁴J
Unknown:
Temperature change = ?
Solution:
To solve this problem, we simply use the expression below:
The quantity of energy is given as:
Q = m C Δt
Q is the quantity of energy
m is the mass
C is the specific heat capacity of aluminum = 0.9J/g°C
Δt is the change in temperature
The unknown is Δt;
Δt = [tex]\frac{Q}{mc}[/tex] = [tex]\frac{2.35 x 10^{4} }{725 x 0.9}[/tex] = 36°C
show how to work out...Calculate the mass in grams of 3.50 x 1025 atoms of lithium. Answer: 404g Li
what is the mass of 1.75 moles of HF?
Answer:
Mass = 35.02 g
Explanation:
Given data:
Number of moles = 1.75 mol
Mass of HF = ?
Solution:
Formula:
Mass = number of moles × molar mass
Molar mass of HF = 20.01 g/mol
by putting values,
Mass = 1.75 mol × 20.01 g/mol
Mass = 35.02 g
what happend to that mass when the forest burns?
Answer:
When the forest burns we will lose a huge amount of oxygen and animals will lose their home.
Explanation:
How many moles are present in 44.8 L of nitrogen gas (Na)?
Answer:
two moles
There are two moles.
Explanation:
would using a strainer be filtration?
Answer:
To some extent, yes
Explanation:
The proton number of barium (Ba) is 56. It is in Group II of the periidic table how many electrons would you expect a barium atom to contain in its outer energy level?
Answer:
A barium atom would be expected to contain 2 electrons in its outer energy level.
Explanation:
The columns of the periodic table are called groups. There are eighteen groups, numbered from 1 to 18.
The elements of each group have the same number of electrons in their last atomic shell, which is why they have similar chemical properties, because the chemical properties of chemical elements are strongly related to the electrons located in the last atomic shell.
That is, in a group, the chemical properties are very similar, because all the elements of the group have the same number of electrons in their last or last shells.
A barium atom would be expected to contain 2 electrons in its outer energy level.
3. A sample of neon gas has a volume of 1.2 L at 28.5°C. What will the volume be at 125°C it the
pressure remains constant?
Answer:
1.58L
Explanation:
Given parameters:
Initial volume = 1.2L
Initial temperature = 28.5°C = 28.5 + 273 = 301.5K
Final temperature = 125°C = 125 + 273 = 398K
Unknown:
New volume = ?
Solution:
Volume and temperature relationship is resolved using the Charles's law.
The law states that "the volume of a fixed mass of a gas varies directly as its absolute temperature if the the pressure is constant".
So;
[tex]\frac{V1}{T1}[/tex] = [tex]\frac{V2}{T2}[/tex]
V1 is the initial volume
T1 is the initial temperature
V2 is the new volume
T2 is the new temperature
[tex]\frac{1.2}{301.5}[/tex] = [tex]\frac{V2}{398}[/tex]
301.5V2 = 477.6
V2 = 1.58L
Write the balanced chemical equations for the following double-replacement reactions.
(Steps: skeleton equation/count number of atoms in reactants and products/balance both sides)
Q24. Aqueous lithium iodide and aqueous silver nitrate react to produce solid sikrer iodide and
1 aqueous lithium nitrate.
A24.
I need the balanced chemical equation for this question
The balanced equation :
LiI(aq) + AgNO₃(aq) --> AgI(s) + LiNO₃(aq)
Further explanationGiven
Word equation
Required
Balanced equation
Solution
There are 3 ways to express a chemical equation:
word equation skeleton equation balanced equationSkeleton equation for reaction above :
LiI(aq) + AgNO₃(aq) ⇒ AgI(s) + LiNO₃(aq)
If we look at this reaction, all the cations and anions have a charge of 1 (+1 or -1) so the balanced reaction between the skeleton equation and the balanced equation is the same
Why are some energy resources more expensive to use than others?
Is water a reactant or product?
Answer: Reactant
Explanation:
In simple wording, Water act as a reactant and it broke or we can say split the larger molecule in the smaller ones, The H and OH bonds are attached to the two products that are formed after the reaction. Another process in which water is used as an important reactant is photosynthesis.
Predictions about the future based on the position of planets is an example of physics biology earth science pseudoscience
Answer:
Pseudoscience
Explanation:
Predicting the future based solely on the position of the planets is an example of pseudoscience.
Pseudoscience is a body of knowledge that is not based on the scientific method but on some unverifiable/unprovable claims.
Predictions about the future can only be valid if it is based on the scientific method, not just about the position of the planet. The scientific method involves observation, hypothesis formulation, testing of the hypothesis through repeatable experiments, and arriving at conclusion.
Any other statement or belief that is not based on these procedures is said to be pseudoscientific.
Answer:
The answer to your question is pseudoscience.
Explanation:
I took the module 1 exam and got it right, yesterday.
help PLZ will give brainliest
Answer:
6.Crust
7. outer core
8.mantle
How many grams of NH3 are needed to make 2.50 moles of (NH4)2SO4?
2 NH3(g) + H2SO4(aq) --> (NH4)2SO4(aq)
Answer:
85.155g NH3
Explanation: