Answer: first of all an ionic bonds is the electrostatic force of attraction between opposite ions and and covalent bonds is the bond between different elements mostly non metals or the sharing of electrons between elements which are mostly non metals.
Explanation: metals and non metals react to form ionic compounds
and non metals react to form covalent bonds
HOW TO DIFFERENTIATE
ionic solids the particles are charged and the forces between them are strong
covalent solids the particles are not charged and the forces between them are weak
now i would differentiate using their properties
ionic bonds / compounds
have high melting point
have low melting point
They are soluble in water
and they conduct electricity even when melted or dissolved in water
covalent bonds /compounds
they have low melting point
they have low melting point
They are insoluble
they do not conduct electricity
HOPE THIS HELPS!!!
when carbon is heated in a limited supply of oxygen, a gas is obtained.
1 .what is the name of this gas
Answer:
carbon monoxide
I think its correct but I am not sure
Answer: when carbon is heated in air carbon dioxide is formed, so is incomplete combustion which results in carbon monoxide.
Explanation: but when carbon dioxide reacts with more oxygen carbon monoxide is formed i guess.
I AM A BIT SURE BUT HOPE THIS HELPSSSS!!!!
TIMED PLS PLS HELP ASAP
The scattering of sunlight by the mixture of gas molecules in air results in the blue color of the sky. Calculate the energy (in Joules) of a single photon of blue light with a frequency of 6.00 × 10¹⁴ Hz. (h = 6.626 × 10⁻³⁴ J • s)
Answer:
It's me mario
Explanation:
A thief who has stolen large quantities of uranium-235 may have increased
the threat of what?
A. Alpha decay
B. Nuclear fusion
C. Nuclear waste
D. Proliferation
Since uranium - 235 decays by alpha decay, the thief runs a risk of exposure to alpha decay.
What is alpha decay?Radioactive decay is the sponteanous disintergration of a nuclide to yiled daughter nuclide and release energy.
We can see the decay of Uranium -235 in the image attached to this answer. Hence, it then follows that the theif here runs the risk of exposure to alpha decay.
Learn more about alpha decay: https://brainly.com/question/9904853
Answer:
D. Prolideration
Explanation:
Just took the test
Which of these hypotheses cannot be tested?
A. The percentage of salt in ocean water stays the same throughout the ocean.
O B. Doubling the amount of salt in a bread recipe will cause the dough to rise faster.
C. Cooks should use sea salt in recipes instead of regular table salt.
O D. Increasing the amount of salt in salt water will increase the boiling point.
Cooks should use sea salt in recipes instead of regular table salt.
La masa de una olla es de 300g y contiene 90% de aluminio. Hallar el número de moles de aluminio de la olla. P.A.(Al= 27)
Explanation:
The mass of a pot is 300g and contains 90% aluminum. Find the number of moles of aluminum in the pot. P.A. (Al = 27)
The mass of aluminum present in the pot is:
[tex]300 g * 90/100\\=270 g[/tex]
Hence, in the given pot 270g Al is present.
[tex]Number of moles of Al=\frac{given mass ofAl}{its molar mass}[/tex]
The gram atomic mass of Al -27 g/mol
Given the mass of Al is 270 g
Substitute these values in the above formula:
[tex]Number of moles of Al=\frac{given mass ofAl}{its molar mass}\\=\frac{270 g}{27 g} \\=10.0 mol[/tex]
Answer is 10.0 mol of Al is present.
helpe pls I will mark brainlest
Answer:
What is the question needing to be answered?
Explanation:
Usually with a scientific hypothesis, you ask the question in an if, then statement. For example: If it rains outside, then the ground will be wet. It's kind of like a cause and effect statement.
the valency of both Oxygen and magnesium is 2 give reason
Answer:
the valency of an element is its combining capacity that is the number of electrons it requires to lose, gain or share in order to become neutral.
[ An element can become neutral if it completes it's octet. That is if an element has 8 electrons in it'd outermost shell then it is considered neutral ]
The valence of Magnesium is 2 because it requires to lose 2 electrons to become neutral. whereas, the valence of Oxygen is 2 because it needs to gain 2 electrons to become stable.Hence they both have the same valence.
One may say that oxygen's valence is -2 while that of Magnesium is + 2. It's meaning is still the same but "-" sign indicates that oxygen will be gaining electrons in the process of becoming stable.
which of the following is an example of an arrthenius acid
Answer:
The common examples of Arrhenius acid includes HCl (hydrochloric acid), H2SO4 (sulphuric acid), HNO3 (nitric acid), etc.Oct 21, 2020
Explanation:
what is another name for hard water?
Answer:
Hyponym is the another name for hard water.
Explanation:
Please Mark me brainliest
What is the name of this compound
Answer:
horizontal
Explanation:
Scoring Scheme: 3-3-2-1 Given the starting solution had a concentration of 1.25 M, how many moles of Co[H2O]6Cl2 were available in the amount of starting solution you used
Answer:
The solution has 0.00994 moles of Co[H2O]6Cl2
Explanation:
Complete question: Given the starting solution had a concentration of 1.25 M, how many moles of Co[H2O]6Cl2 were available in the amount of starting solution you used?
mL= 7.95
Step 1: Data given
Concentration of the starting solution = 1.25 M
Starting solution = Co[H2O]6Cl2
Step 2: Calculate molar mass of Co[H2O]6Cl2
Atomic mass of Co = 58.93 g/mol
Atomic mass of H = 1.01 g/mol
Atomic mass of O = 16.00 g/mol
atomic mass of Cl = 35.45 g/mol
Molar mass of Co[H2O]6Cl2 =
1*58.93 + 12*1.01 + 6*16.00 + 2*35.45 = 237.95 g/mol
Step 3: Calculate number of moles
C = n/v
⇒with C = the Concentration of the starting solution = 1.25 M
⇒with n= the number of moles = to be determined
⇒with v = the volume = 7.95 mL = 0.00795 L
n = C * V
n = 1.25 M * 0.00795 L
n = 0.00994 moles
The solution has 0.00994 moles of Co[H2O]6Cl2
______ exhibits the highest
intermolecular forces of the states of matter.
A. Solid
B. Liquid
C. Gas
D. Vacuum

What is the percent yield of a reaction?
O A. The difference between measured and calculated amounts
OB.
The amount of produd obtained
amount possible
* 100
C. The amount of product actually obtained in a reaction
D. The amount of product that is possible from a reaction
Answer:
B. The amount of produd obtained/amount possible * 100
Explanation:
In chemistry, the yield of a chemical reaction is the quantity or amount of products obtained in that chemical reaction. It is calculated by using the following formula:
Percentage yield = Actual yield/theoretical yield × 100
- The actual yield is the amount of products got from a chemical reaction
- The theoretical yield is the amount of product got from using the balanced equation (stoichiometry).
Jonny Jonny.
Yes papa?
Eating Sugar?
What comes next?
(A) Yes Papa
(B) No Mama
(C) Yes Mama
(D) No Papa
Answer:
(B) No papa
arafgzhzhsjdjkskbdjzjsj
Answer:
(D) No Papa
Explanation:
is this even chemistry pffttt
Which of these is a chemical property of a substance?
Answer:
A chemical property is a characteristic of a substance that may be observed when it participates in a chemical reaction. Examples of chemical properties include flammability, toxicity, chemical stability, and heat of combustion
Which is a mixture?
Sodium metal
chlonne gas
sodium metal and chlonne gas
sodium chlonde (salt) and water
Answer:
I believe it's salt and water
Explanation:
not sure
Answer:
Mixture is a electronic device used to peel the things such as onion ,tomato,ginger, garlic etc.
Which of the following changes in the state of a substance results in an increase in the entropy?
Gas to solid
Gas to liquid
Liquid to solid
Solid to liquid
Answer:
the correct answer is
D. solid to liquid
CORRECT ANSWER ONLY ND WILL GIVE BRAINLIEST✌
Calculate the mass of nitrogen dioxide gas that would occupy
the same volume as 10g of hydrogen gas at ē same pressure and temperature
(H= 1.0 N = 14.0 O= 16.0) GAS LAWS/MOLES
Answer:
150g
Explanation:
Assuming they are ideal gases at the same temperature and pressure, equal moles of gasses have equal volume. IN this case, if we have 10g of hydrogen gas, that is 5 moles of H2 gas. That means 5 moles og NO2 will occupy the same volume which is 5*(14.0 + 16.0*2) = 230 g
why do scientists classify living things? ( I need 4 reasons why) thank you take care x
Answer:
1. To be able to easily name organisms
2. To ease communication among scientists
3. To give knowledge about the broad variety of organisms
4. To make the study of organisms easier
Fumaric acid, which occurs in many plants, contains, by mass, 41.4% carbon, 3.47% hydrogen, and 55.1% oxygen. The molecular mass of this compound is 116 amu. The molecular formula of this compound is
Question 15 options:
CHO
C3H3O
C3H3O3
C4H4O4
C6H6O6
Answer:
Explanation:
C = 41.4/12 = 3.43
H = 3.47/1 = 3.47
O = 55.1/16 =3.44
CHO is the skeletal formula (divide each by the lowest number above). The results are close enough to 1 to be 1.
(CHO)_x = 116
C + H + O = 29
(29) _ x = 116
x = 116/29
x = 4
So there area 4 carbons 4 hydrogens and 4 oxygens.
The correct formula is C4H4O4
write molecular formula
1)aurric cloride
2)aluminium hydroxide
3)potassium thiosulphate
4)magnesium bicarbonate
5)magnesium sulphate
6)sodium oxide
7)cuprous oxide
8)mercuric oxide
9)calcium nitrate
10)aluminium oxide
11)ferric chloride
12)ammoium oxide
13)silver chloride
14)hydrogen bromide
15)magnesium nitride
16)hydrogen peroxide
17)sodium sulphate
18)ammonium sulphate
19)ferrous sulphate
20)sodium carbonate
21)zinc carbonate
22)calcium silicate
23)zinc carbonate
24)potassium clorate
25)aluminium hydroxide
26)ammonium hydroxide
27)sodium silicate
Okay.
Here's your below answers.
1) AuCl3.
2) Al(OH)3.
3) K2S2O3.
4) Mg(HCO3)2.
5) MgSO4.
6) Na2O.
7) CuO.
8) HgO.
9) Ca(NO3)2.
10) Al2O3.
11) FeCl2.
12) (NH4)2O.
13) AgCl.
14) HBr.
15) Mg3N2.
16) H2O2.
17) Na2SO4.
18) (NH4)2SO4.
19) FeSO4.
20) Na2CO3.
21) ZnCO3.
22) CaSiO3.
23) ZnCO3.
24) KClO3.
25) Al(OH)3.
26) NH4OH.
27) Na2SiO3.
For a reaction: aA → Products, [A]o -4.3 M, and the first two half-lives are 56 and 28 minutes, respectively. Calculate k (without units). Show Work!
A. 7.7 x 10^-2
B. 4.2 x 10^-3
C. 3.8 x 10^-2
D. 8.3 x 10^-3
E. None of these
Answer:
C.[tex]3.8\times 10^{-2}[/tex]
Explanation:
We are given that
Initial concentration, [tex][A]_o=4.3 M[/tex]
First half life, [tex]t_{\frac{1}{2}}=56[/tex]minutes
Second half life, [tex]t'_{\frac{1}{2}}=28[/tex]minutes
We have to find K.
The given reaction is zero order reaction.
We know that for zero order reaction
[tex]t_{\frac{1}{2}}=\frac{[A]_o}{2k}[/tex]
Using the formula
[tex]56=\frac{4.3}{2k}[/tex]
[tex]k=\frac{4.3}{2\times 56}[/tex]
[tex]k=3.8\times 10^{-2}[/tex]
Hence, option C is correct.
Zero-order reactions are the reactions when a surface or a catalyst is required for the reaction to proceed and is saturated by the reactant chemicals. The result of the concentration versus the time plot will be a straight line in a zero-order reaction.
[tex]3.8 \times 10 ^{-2}[/tex] is the value of k.
How to calculate the value of k?Given,
Initial concentration [tex][A_{0}][/tex] = 4.3 MThe first half-life of the reactant [tex](t \dfrac{1}{2})[/tex] = 56 minutesThe second half-life of the reactant [tex](t \dfrac{1}{2})[/tex] = 28 minutesThe given reaction in the question is of zero-order and for that, we know that,
[tex]t \dfrac{1}{2} = \dfrac{[A_{0}] }{2\;\rm k}[/tex]
Substituting the values in the equation we get:
[tex]\begin{aligned}56 &= \dfrac{4.3 }{2\; \rm k}\\\\\rm k &= {4.3 }{2 \times 56}\\\\\rm k &= 3.8 \times 10^{ -2}\end{aligned}[/tex]
Therefore, option C is correct.
Learn more about the zero-order reaction here:
https://brainly.com/question/4638382
P +2 Fe +1 N+1 S+6 Mg +2
Answer:
= P + 2eF + N + S + 6gM + 2
Explanation:
Multiply: 1 . N = N
= P + 2eF + N + 1 . S + 6gM + 2
Multiply: 1 . S = S
= P + 2eF + N + S + 6gM + 2
Hope This Helps!
Based on the Lewis/electron dot representation
of the two atoms, predict the ratio of metal
cationic (+) atom to nonmetal anionic (-) atom in
the compound.
.Ca.
.P.
A. 1:1
B. 3:2
C. 2:1
D. 3:1
Can someone plz tell me how to do this.
Answer:
B or C think so
What happens if kinetic energy of a gas is lowered
Answer:
"If you lower the kinetic energy of a gas its temperature will decrease because temperature is a measure of the average kinetic energy of a substance."
Explanation:
How many Hydrogen (H) Atoms are in Methylene?
Answer:
FOUR HYDROGEN ATOMS
Explanation:
Two C atoms, four H atoms, and two O atoms can also be arranged to form a methyl formate, which is used in manufacturing, as an insecticide, and for quick-drying finishes. Methyl formate molecules have one of the oxygen atoms between the two carbon atoms, differing from the arrangement in acetic acid molecules.
The Methylene group has 2 hydrogen. -CH2
If an atom contains more
electrons than protons, it is
Answer:
If an atom has the same number of electrons as protons, it is a neutral atom.
Explanation:
The graph shows the volume of a gaseous product formed during two trials of a reaction. A diferent concentration of reactant was used during each trial, whereas the other factors were kept constant. Trial 2 Amount of Product Trial 1 Time Which of the following statements explains which trial has a lower concentration of the reactant? O Trial 1, because the average rate of the reaction is lower. O Trial 1, because this reaction lasted for a longer duration than Trial 2. O Trial 2, because this reaction was initially fast and later slowed down. O Trial 2, because the volume of product formed per unit time was higher
Answer:
A). Trial 1, because the average rate of the reaction is lower.
Explanation:
The first sentence elaborates that 'trial 1 had a lower level of concentration of the reactant that eventually led the reaction's average rate to fall.'
A trial having a higher level of concentration of a specific reactant will cause the concentration's average rate to rise. As per the graph provided, trial 2's average reaction rate is higher which shows that its concentration is greater and more reactive. However, the opposite happens in trial 1 where the amount of reactant is lesser in the concentration that leads the concentration to possess a lower rate of reaction. Thus, option A is the correct answer.
Which pair of substances would react the
fastest?
a. Copper sheet and concentrated
nitric acid.
b. Copper powder and dilute nitric acid
C. Copper powder and concentrated
nitric acid.
Answer:
C. It has the highest rate of reaction. Copper has the highest TSA/V and concentrated nitric acid has huggest num of solute
Help please i beg someone answer and explain
Answer:
Q,N,1) lithium + hydrochloric -> lithium chloride + Hydrogen.
word equation ( 2li + 2HCl -> 2liCl + H2)