What three parts of your eye work together to create a clear image?

Answer:

O HCl will be completely used up while Zn will remain in excess.

Explanation:

In reactions involving two reactants, if one of them is the limiting reactant then the other one has to be the reactant in excess.

Meaning that in this case, the reaction will proceed until HCl is completely used up, and a certain amount of Zn will remain (thus being the reactant in excess).

Answer:

6.85 g

Explanation:

Step 1: Given data

Step 2: Calculate the moles of sucrose (solute) required

Molarity is equal to the moles of solute divided by the liters of solution.

M = moles of solute / liters of solution

moles of solute = M × liters of solution

moles of solute = 0.200 mol/L × 0.10000 L = 0.0200 mol

Step 3: Calculate the mass corresponding to 0.0200 moles of sucrose

The molar mass of sucrose is 342.3 g/mol.

0.0200 mol × 342.3 g/mol = 6.85 g

The amount of sucrose (in grams) must be weighed out for the given reaction is 6.846g.

Mass of any substance will be calculated by using the moles as:
n = W/M, where

W = required mass

M = molar mass

Given that, molarity of sucrose = 0.2 M

Volume of solution = 100mL = 0.1 L

Relation between moles and molarity is represented as:
M = n/V

On putting values on the above equation we get,

n = (0.2)(0.1) = 0.02 moles

We know that molar mass of sucrose (C₁₂H₂₂O₁₁) = 342.3 g/mole

Now we calculate the required mass by putting values on the first equation as:
W = (0.02)(342.3) = 6.846g

Hence, the required mass of sucrose is 6.846g.

To know more about moles, visit the below link:

https://brainly.com/question/24639749

Answer:

16.6 mg

Explanation:

Step 1: Calculate the rate constant (k) for Iodine-131 decay

We know the half-life is t1/2 = 8.04 day. We can calculate the rate constant using the following expression.

k = ln2 / t1/2 = ln2 / 8.04 day = 0.0862 day⁻¹

Step 2: Calculate the mass of iodine after 8.52 days

Iodine-131 decays following first-order kinetics. Given the initial mass (I₀ = 34.7 mg) and the time elapsed (t = 8.52 day), we can calculate the mass of iodine-131 using the following expression.

ln I = ln I₀ - k × t

ln I = ln 34.7 - 0.0862 day⁻¹ × 8.52 day

I = 16.6 mg

Answer:

a

Explanation:

a

Answer:

B. Isotopes of the element.

Explanation:

Isotopes are basically atoms of the same element that contain the same number of protons, but a different number of neutrons.

Answer:

CH3CH2CH3

Explanation:

Dipole moment is the measure of the polarity of a chemical bond. It is the extent of charge separation in a molecule.

Dipole moment is the product of the magnitude of charge and the distance separating the charges from each other.

The molecule having the lowest dipole moment among the options is the molecule that has the least polarity. The least polar molecule among the options is CH3CH2CH3, it has no polar bonds in its structure.

We have that for the Question "Identify the compound with the lowest dipole moment. Identify the compound with the lowest dipole moment. CH3CH2CH3 CH3OCH3 CH3CHO CH3OH CH3CN "

it can be said that

 From the question we are given

CH3CH2CH3

CH3OCH3

CH3CHO

CH3OH

CH3CN

Generally alkanes have the lowest dipole moment, they have C-H bond which are non polar.

Therefore,

[tex]CH_3CH_2CH_3[/tex] have the lowest dipole moment

For more information on this visit

https://brainly.com/question/17756498

Answer:

true

Explanation:

the small car also has gravity making it heavy

Answer:

Answer:

Mean

Explanation:

The mean of a series of measurements is calculated when all the measurements are added up and then divided by the number of measurements taken, as follows:

As there are 4 measurements, the mean is:

Answer:

A

Explanation:

Answer: The mass of P-32 left from the original sample is 32.07 mg

Explanation:

All radioactive decay processes follow first-order reactions.

Calculating rate constant for first order reaction using half life:

[tex]t_{1/2}=\frac{0.693}{k}[/tex] .....(1)

[tex]t_{1/2}[/tex] = half life period = 14.3 days

k = rate constant = ?

Putting values in equation 1:

[tex]k=\frac{0.693}{14.3days}\\\\k=0.0485days^{-1}[/tex]

The integrated rate law equation for first-order kinetics:

[tex]k=\frac{2.303}{t}\log \frac{a}{a-x}[/tex] ......(2)

Given values:

a = initial concentration of reactant = 175 mg

a - x = concentration of reactant left after time 't' = ? mg

t = time period = 35.0 days

Putting values in equation 2:

[tex]0.0485days^{-1}=\frac{2.303}{35.0 days}\log (\frac{175}{a-x})\\\\\log (\frac{175}{a-x})=\frac{0.0485\times 35.0}{2.303}\\\\\log (\frac{175}{a-x})=0.737\\\\\frac{175}{a-x}=10^{0.737}\\\\a-x=\frac{175}{5.457}=32.07mg[/tex]

Hence, the mass of P-32 left from the original sample is 32.07 mg

Answer:

i think its A

Answer:

D. The planet that is closer to the Sun

Answer:

a) electrons

b) from Y to X

Explanation:

positive protons are the cores of atoms in relative to electrons very, very heavy.

the outer electrons of atoms can move, under certain conditions, away from the atom, leaving it electrically unbalanced -> positively charged

there can also be a surplus of electrons on many surfaces, leading to a static negative charge. you know this when you are charged and you discharge with an object or another person, electrically balancing the two bodies charge.

electrons are also much smaller. they are the "things" to move, let it be trough the air or trough a wire, while the heavy protons will stay in place (unless the materials is melted of course, extreme heat brakes the bounds between atoms relatively well)

Explanation:

An atom consists of two regions. The first is the tiny atomic nucleus, which is in the center of the atom and contains positively charged particles called protons and neutral, uncharged, particles called neutrons. ... Most atoms contain all three of these types of subatomic particles—protons, electrons, and neutrons.

Answer:

2 L

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

2H₂ + O₂ —> 2H₂O

From the balanced equation above, we can see clearly that 1 L of O₂ reacted to 2 L of H₂O.

This implies that 2 L of H₂O can be obtained by the reaction of 1 L of O₂.

Thus, option 3 gives the correct answer to the question.

Answer:

A concentrated solution is one that has a relatively large amount of dissolved solute. A dilute solution is one that has a relatively small amount of dissolved solute.

Answer:

[tex]m_{Al_2O_3}=118.27gAl_2O_3[/tex]

Explanation:

Hello there!

In this case, if we consider the following chemical reaction, whereby Al2O3 is produced from Al and FeO:

[tex]3FeO+2Al\rightarrow 3Fe+Al_2O_3[/tex]

Thus, since there is 3:1 mole ratio of FeO to Al2O3, it turns out feasible for us to use their molar masses, 71.844 g/mol and 101.96 g/mol respectively, to obtain the grams of the latter as follows:

[tex]m_{Al_2O_3}=250.gFeO*\frac{1molFeO}{71.844gFeO}*\frac{1molAl_2O_3}{3molFeO} *\frac{101.96gAl_2O_3}{1molAl_2O_3}\\\\m_{Al_2O_3}=118.27gAl_2O_3[/tex]

Regards!

Answer: The equilibrium constant for the given chemical reaction is [tex][O_2]^3[/tex]

Explanation:

The equilibrium constant is defined as the ratio of the concentration of the products to the concentration of reactants each raised to the power of their stoichiometric coefficients.

The concentration of all the solids and liquids are considered to be 1 in the expression of equilibrium constant

For the given chemical equation:

[tex]2KClO_3(s)\rightleftharpoons 2KCl(s)+3O_2(aq)[/tex]

The expression of equilibrium constant follows:

[tex]K_{eq}=[O_2]^3[/tex]

Hence, the equilibrium constant for the given chemical reaction is [tex][O_2]^3[/tex]

Answer: The mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the given balanced equation is 3.03 g.

Explanation:

The given balanced reaction equation is as follows.

[tex]2Al + 6HCl \rightarrow 2AlCl_{3} + 3H_{2}[/tex]

Here, the mole ration of Al and hydrogen produced is 2 : 3

As mass of aluminum is given as 26.98 g. So, moles of aluminum (molar mass = 26.98 g/mol) is as follows.

[tex]Moles = \frac{mass}{molar mass}\\= \frac{26.98 g}{26.98 g/mol}\\= 1 mol[/tex]

So, when 1 mole of Al reacted then 1.5 moles of hydrogen is produced as per the given mole ratio.

Therefore, mass of hydrogen formed is calculated as follows.

[tex]mass = moles \times molar mass\\= 1.5 mol \times 2.02 g/mol\\= 3.03 g[/tex]

Thus, we can conclude that the mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the given balanced equation is 3.03 g.

Answer:

I choose D option because may be it's correct

I believe it is c

Explanation:

because if u think about it and also do some research you would see that the circulatory system is a strong part of your body which can help u through natural defences if this sounds weird it's all in research but if it ain't c dont blame me for ruining your life- lol but yeah I think its c

Answer:

Please find the complete question in the attached file.

Explanation:

It would only be radioactive if the DNA molecule that employed the poly-T rand as templates. Its other molecule of the daughter would not have been radioactive as it did not need dATP for its replication. While each strand of the second molecule includes t, simultaneous reproduction dATP from both daughter molecules is needed so that each of those is radioactive.

Answer:

D

Explanation:

Answer:

The Tundra Climate

Explanation:

:) hope this helps

The question is incomplete, the complete question is:

The element tin has the following number of electrons per shell: 2.8. 18, 18, 4. Notice that the number of electrons in the outer shell of a tin atom is the same as that for a carbon atom. Therefore, what must be true of tin? Tin is a polar atom and can bind to other polar atoms. Tin has a high molecular weight to give tin-containing molecules greater stabilty. All of the above Tin conform single covalent bonds with other elements, but not double or triple covalent bonds Tincan bind to up to four elements at a time

Answer:

Tin can bind to up to four elements at a time

Explanation:

Certain important points were made in the question about tin and one of them is that tin is an element in the same group as carbon hence it has the same number of valence electrons as carbon.

Carbon is always tetra valent. The tetra valency of carbon is the idea that carbon forms four bonds.

If tin has the same number of valence electrons as carbon, then, tin can bind to up to four elements at a time

Answer:

Keep temperature constant and increase the pressure of the reaction. The rate of reaction increases.

Explanation:

First of all, the question is asking us to design an experiment to investigate the effect of pressure on the rate of reaction hence the pressure can not be held constant since it is the variable under investigation. This eliminates the first option.

Secondly, increasing the pressure of the reaction means that particles of the gas collide more frequently leading to a greater number of effective collisions and a consequent increase in the rate of reaction according to the collision theory.

Hence the answer above.

Answer:

11.1 cm

Explanation:

First we convert 58.1 pounds into grams:

Then we calculate the volume of the gold cube, using the given density:

26353.69 g ÷ 19.3 g/mL = 1365.48 mL

With the volume of a cube we can calculate the side length:

Answer:

Number of mole in H2O = 5.4 moles

Explanation:

Given:

Mass of H2O = 97.3 gram

Find:

Number of mole in H2O

Computation:

We know that molar mass of H2O = 18 g/mole

So,

Number of mole = Given Mass / Molar mass

Number of mole in H2O = Mass of H2O / Molar mass of H2O

Number of mole in H2O = 97.3 / 18

Number of mole in H2O = 5.4055

Number of mole in H2O = 5.4 moles

Answer:

i think it's variable pressure

if not soo advance sorry :)

Explanation:

the answer is in the Image above

The radius of the potassium atom is [tex]2.27\times 10^{-4} \mu m[/tex].

Explanation:

Given:

The radius of potassium atom =[tex]2.27\times 10^{-7} mm[/tex]

To find:

The radius of potassium atom in micrometers.

Solution:

The radius of potassium atom =[tex]2.27\times 10^{-7} mm[/tex]

In 1 millimeter there are 1000 micrometers.

[tex]1 mm = 1000 \mu m[/tex]

Then in [tex]2.27\times 10^{-7} mm[/tex]:

[tex]=2.27\times 10^{-7} \times 1000\\=2.27\times 10^{-4} \mu m[/tex]

The radius of the potassium atom is [tex]2.27\times 10^{-4} \mu m[/tex].

Learn more about conversions here:

brainly.com/question/24530464

brainly.com/question/17743460