The rotation curve for this galaxy look like for raddi larger than 5kpc is angular velocity.
What is angular velocity?Angular velocity is the speed at which the angle between 2 bodies changed whenever an object rotated or revolvers around an axis. This displacements is depicted in the images by the angle firmed by a line on one body andar a line on the other.
Angular velocity can be defined as the Speed at which an item rotates or revolvers around an axis. The Greeks letter Omega (occasionally ) stands for angular velocity. The SI unit for angular velocity is radians per second because it is the expressed as an angle per unit of times.
Orbital speed increase with radius beacuse it is directly proportional to radius
Since V=wr
So on increasing with radius orbital speed also increases.
So here w is angular velocity.
To know more about angular velocity click-
https://brainly.com/question/20432894
#SPJ4
do i need to adjust the tension on my elna super sewing machine when using denim fabric and 100/16 needles?
A tension of 3.5 to 4.5 is advised when sewing tough fabric, such denim or leather. This allows you to effortlessly maintain neatness across the fabric when sewing through it. Before starting to sew any thick material, check the attachments on your sewing machine and adjust the tension.
Depending on the thickness of the denim, I use a straight-stitch length between 3.0 mm and 4.0 mm. I also increase the tension on my machine to 4.6 (up from 4.0 for lightweight woven fabrics). If my denim has spandex in it, I use a stretch stitch, such as a narrow zigzag.
Linen, cotton and denim: These fabrics hold wrinkles well, so they require the highest heat, from 150 to 200 degrees. If needed, you may also use steam or spray water from a bottle or your iron.
The longer the stitch length, the easier and faster it will be to pull the fabric along the gathering threads. However, the shorter the stitch length, the easier it will be to achieve even gathers. We find a 4.5 mm setting to be a good compromise, but it's always a good idea to test and see what you prefer.
To learn more about tension visit:
https://brainly.com/question/4358835
#SPJ4
A 20 kg wagon is pulled along the level ground by a rope inclined 30 degrees above the horizontal (friction is
negligible) (A) How large is the pulling force is the wagon accelerates of .40 m/s²? (B) What is the normal force of
the wagon?
Answer:
(A) 9.2 Newtons
(B) 200.8 Newtons
Explanation:
Attached is the free body diagram I drew along with some of the work/formulas I used. Please ask me any questions you have in the comments about my diagram/work. I'd be happy to walk you through it.
WILL GIVE BRAINLY IF RIGHT
what would happen if you dropped, at the same time, particles of different shapes from a boat into still water
Explanation:
If you dropped particles of different shapes from a boat into still water, they would fall straight down due to the force of gravity. The speed at which they fall would depend on their mass and the shape of the particles could affect how they move through the water, but ultimately they would all sink to the bottom of the water body. If the particles are buoyant, they may float instead of sinking.
The adjacent figure shows a solid 'S' of weight 15N connected to a thread and put on an inclined plane. 1) a-Is the weight of solid 'S' a contact force or a force acting from a distance? b- List the characteristics of the weight of solid 'S'. Thread Inclined plane c- Represent the weight of solid 'S' by a vector. Choose a convenient scale. 2) a- Name the other forces acting on solid 'S' and indicate their types. b- Represent each force by a vector without respecting a scale. c- List the characteristics of each of the above forces. (Without the magnitude) 3) The thread is cut and solid 'S' moves as shown in the adjacent figure a- Name the new force that acts on solid 'S' and indicate its type. b- List the characteristics of this force.(scale 1cm-1.3N). Thread Inclined plane Solid 'S' Solid 'S'
Answer:
Here is answer
Explanation:
a) The weight of the solid 'S' is a contact force because it acts on the solid 'S' through physical contact with the ground.
b) The characteristics of the weight of solid 'S' are:
It acts in the downward direction.
It is a gravitational force that is exerted by the Earth on the solid 'S'.
It is equal to the mass of the solid 'S' multiplied by the acceleration due to gravity (W = m*g).
c) The weight of solid 'S' can be represented by a vector as shown below:
[asy]
unitsize(1cm);
draw((0,0)--(0,15),Arrow(6));
label("$W$", (0,7.5), W);
[/asy]
a) The other forces acting on solid 'S' are the normal force exerted by the inclined plane on the solid 'S' and the frictional force exerted by the inclined plane on the solid 'S'. The normal force is a contact force, while the frictional force is also a contact force.
b) These forces can be represented by vectors as shown below:
[asy]
unitsize(1cm);
draw((0,0)--(0,15),Arrow(6));
label("$W$", (0,7.5), W);
draw((0,0)--(15sqrt(2)/2,15/2),Arrow(6));
label("$N$", (7.5sqrt(2),7.5), NE);
draw((0,0)--(-15sqrt(2)/2,-15/2),Arrow(6));
label("$F_f$", (-7.5sqrt(2),-7.5), SW);
[/asy]
c) The characteristics of these forces are:
The normal force acts perpendicular to the surface of the inclined plane.
The frictional force acts in the opposite direction to the direction of motion or intended motion of the solid 'S'.
The magnitude of the normal force is equal to the weight of the solid 'S', but in the opposite direction.
The magnitude of the frictional force depends on the coefficient of friction between the solid 'S' and the inclined plane, as well as the normal force.
a) The new force acting on solid 'S' is the gravitational force, which is a force acting from a distance.
b) The characteristics of the gravitational force are:
It acts in the downward direction.
It is a force that is exerted by the Earth on the solid 'S'.
Its magnitude can be represented by the vector shown below (using a scale of 1 cm to represent 1.3 N):
[asy]
unitsize(1cm);
draw((0,0)--(0,-1.3),Arrow(6));
label("$W$", (0,-0.65), S);
[/asy]
Three point charges are arranged in a straight line. The point charges are q1 = 10.0 μC, q2 = –40.0 μC, and q3 = –30.0 μC. Charge q1 is 10.0 cm from charge q2, and charge q3 is 20.0 cm from charge q2. Determine the magnitude of the net electric force on charge q1.
Let us find first the forces at 1, 2 & 3 points.
We know that ke= 8.99 * 109N.m2 / C2
The forces are: -
F1 = keq1q2 / r212 = {8.99 * 109N.m2 / C2} * {10 * 10-6 C} * {40 * 10-6 C} / {10 * 10-2 m}2
F1 = 359.6 N
F2 =keq1q3 / r213 = {8.99 * 109N.m2 / C2} * {10 * 10-6 C} * {30 * 10-6 C} / {30 * 10-2 m}2
F2 = 29.96 N
F3 = keq2q3 / r213 = {8.99 * 109N.m2 / C2} * {40 * 10-6 C} * {30 * 10-6 C} / {20 * 10-2 m}2
F3 = 269.7 N
Now,
The net force on q1 is F1 – F2,
i.e. F1 + F2 = 359.6 + 29.96
F(q1) = 389.56 N to the left
To learn more about Coulomb’s Law:
https://brainly.com/question/66110
#SPJ1
which sentence correctly describes when the triple-alpha process occurs in the life cycle of an average-mass star
Three helium-4 nuclei (alpha particles) are turned into carbon by a series of nuclear fusion processes known as the triple-alpha process.
What results from the triple-alpha procedure as the finished product?
The triple-alpha process and the alpha process are two classes of nuclear fusion reactions that stars use to change helium into heavier elements. The alpha process is also referred to as the alpha ladder. [1] Only helium is used in the triple-alpha process, which also yields carbon.
Which statement concerning alpha particles in an atom is accurate?
Two protons and two neutrons make up alpha particles, which are identical to helium nuclei and have a positive charge.
Learn more about Alpha Particle
Visit:
https://brainly.com/question/17464734
#SPJ4
you work at a garden store for the summer. you lift a bag of fertilizer with a force of 131 n, and it moves upward with an acceleration of 0.790 m/s2. (a) what is the mass (in kg) of the fertilizer bag?
Mass of the fertilizer bag is 165.82 kg
Briefing:According to Newton's law,
F = m*a
So, m= F/a
m= 131/0.790
m= 165.82 kg
What is mass?Mass is the measure of matter of a body.
What is Newton's laws?Newton has stated three laws of motion. The first law states that every object will remain at rest or in uniform motion in a straight line unless an external force compels it to change its state of action .
The second law states that the acceleration of an object is dependent upon two variables - the net force acting upon the object and the mass of the object.
The third law states that every action has an equal and opposite reaction.
To know more such numericals, visit :
https://brainly.com/question/14633087
#SPJ4
QUESTION 8 OF 30
Using equations for KE and GPE, what is the maximum height an object will
reach if it is thrown vertically upwards at 24.0 m/s ? (Answer to 3 sf with unit)
The maximum height an object will reach if it is thrown vertically upwards at 24.0 m/s will be equal to 29.35 meters.
What is kinetic energy?Kinetic energy is the term used in physics to describe the force that a moving item has.
It is described as the amount of effort necessary to accelerate anybody with a particular mass from rest to a given velocity. Except for variations in speed, the body retains the kinetic energy it gains during acceleration.
As per the given information in the question,
The formula of kinetic energy is,
K.E = 1/2 mv² (i)
The formula of gravitational potential energy is,
u = mg (ii)
Equate equations (i) and (ii)
1/2 mv² = mgh
h = 1/2 v²/g
h = 1/2 (24)²/9.81
= 576/19.62
h = 29.35 meters.
To know more about Kinetic energy:
https://brainly.com/question/26472013
#SPJ1
how long (in s) does it take a child on a swing to complete one swing if her center of gravity is 5.53 m below the pivot?
4.71 s long (in s) does it take a child on a swing to complete one swing if her center of gravity is 5.53 m below the pivot.
What is the center of the gravity?The average position of an object's weight is known as its center of gravity. Any object's travel through space may be entirely explained in terms of how its gravitational center moves from one location to another and, if it is free to spin, how it rotates around that center of gravity. Calculations combining gravitation and dynamics may be made much simpler by treating an object's mass as though it were concentrated at a single location.
Briefing:T=2π√(l/g)
T=2π√(5.53/9.81)
T=4.71
T =4.71 s
To know more about center of gravity visit:
https://brainly.com/question/20662235
#SPJ4
Hooke's law states that the restoring force of a spring is directly proportional to a small displacement. Students in physics class were conducting an experiment to determine the difference in displacement among various springs. They wanted to determine if displacement not only varied with mass but also with the type of spring used. The class tested twenty springs; they varied in length, circumference, and material. They used an assortment of masses as well. On some springs they used masses of 5g increments; on others, masses of 10g increments. After hanging the masses from each spring, they measured how far the springs stretched. The students concluded that thin, aluminum springs had greater displacement than short, thick, iron springs. How could the students improve the validity of the data in this experiment to better support their conclusion?.
The kind of spring should be held constant so as to improve the validity of the experiment.
What is Hooke's law?Hooke's law states that the force that acts on a spring is directly proportional to the extension of the spring as long as the elastic limit is not exceeded.
As such, we can now understand that we can only be able to talk about the Hooke's law if there is no way in which the material has passed the elastic limit of the material. In this case, we are told that the students just embarked on a kind of experiment and they want to be able to verify the validity of the Hooke's law.
We saw that the masses that were hanged were increased but the springs were also changed. This would not allow us to determine the force constant and the Hooke's law accurately.
Learn more about Hooke's law:https://brainly.com/question/29126957
#SPJ1
boat moves north at a velocity of 2.5 m/s while the current moves downstream at 6.0 m/s east. What is the resultant velocity of the boat, relative to an observer on the shore?
A) 4.5 m/s, NE
B ) 4.5 m/s, SE
C ) 6.5 m/s, NE
D ) 6.5 m/s, SE
E) 8.5 m/s, NE
Relative to the observer in on the shore, the velocity of the boat is 6.5 m/s, NE.
What is relative velocity?
The velocity of an object in relation to another observer is known as its relative velocity.
We cay say that the relative velocity is equal to the vector difference between the velocities of two objects. The relative velocity of A with respect to B= velocity of the body A – velocity of the body B.
The diagram below shows the calculation where AC is relative speed, AB is speed of the boat and BC is the speed of stream.
To learn more about relative velocity from the given link
https://brainly.com/question/19260269
#SPJ1
A car travels down a road at a certain velocity, vcar. The driver slows down so that the car is traveling only a third as fast as before. Which of the following is the correct expression for the resulting velocity?
a. 2vcar
b. 1/3vcar
c. -1/2vcar
d. -2vcar
The correct expression for the resulting velocity is -1/2 vcar. The correct option is c.
What is velocity?
The directional speed of an item in motion, as measured by a specific unit of time and observed from a certain point of reference, is what is referred to as velocity.
A car travels down a road at a certain velocity, is Vcar.
Let the initial velocity of the car travel downward be -V car
It is also, given, that the driver slows down so that the car is traveling only half as fast as before.
Resulting velocity = -1/2 vcar
Therefore, the correct option is c. -1/2vcar.
To learn more about velocity, refer to the link:
https://brainly.com/question/18084516
#SPJ1
a constriction in a pipe reduces its diameter from 4.0 cm to 2.0 cm. where the pipe is narrow the water speed is 8.0 m/s. where it is wide the water speed is:
The velocity on the narrow side is 11.6 m/s. This is the velocity of the water in the narrow part of the pipe.
How to find velocity ?To find the velocity of the water where the pipe is narrow, you can use the formula for the mass flow rate, which is given by:
Mass flow rate = Density * Flow rate
= Density * (Area * Velocity)
Where:
Density is the density of the fluid
Flow rate is the volume flow rate, or the rate at which volume flows through the pipe
Area is the cross-sectional area of the pipe
Velocity is the velocity of the fluid
The mass flow rate is constant, so you can set the mass flow rate on either side of the constriction equal to each other and solve for the velocity on the other side.
The cross-sectional area of the pipe on the narrow side is given by the formula for the area of a circle:
A = pi * r^2
Where:
A is the cross-sectional area of the pipe
r is the radius of the pipe
The radius of the pipe on the narrow side is 3 cm / 2 = 1.5 cm. Plugging this value into the formula for the cross-sectional area, you get:
A = pi * (1.5 cm)^2
= 7.07 cm^2
The cross-sectional area of the pipe on the wide side is given by the same formula, with a radius of 6 cm / 2 = 3 cm:
A = pi * (3 cm)^2
= 28.27 cm^2
Since the mass flow rate is constant, you can set the mass flow rates on either side of the constriction equal to each other and solve for the velocity on the other side:
(Density * 7.07 cm^2 * v) = (Density * 28.27 cm^2 * 8 m/s)
Solving for v, the velocity on the narrow side, you get:
v = (Density * 28.27 cm^2 * 8 m/s) / (Density * 7.07 cm^2)
= 11.6 m/s
The final value for the velocity on the narrow side is 11.6 m/s. This is the velocity of the water in the narrow part of the pipe.
To learn more about mass flow rate refer :
https://brainly.com/question/13289839
#SPJ4
sir lancelot, who weighs 800 n, is assaulting a castle by climbing a uniform ladder that is 5.0 m long and weighs 180 n. the bottom of the ladder rests on a ledge and leans across the moat in equilibrium against a frictionless, vertical castle wall. the ladder makes an angle of 53.1 deg with the horizontal. lancelot pauses one third of the way up the ladder. (a) find the normal force and friction forces on the base of the ladder. (b) find the minimum coefficient of static friction needed to prevent slipping at the base. (c) find the magnitude and direction of the contact force on the base of the ladder. (that is, the vector sum of the forces at the base.)
(a) The normal force is 267.7 N and frictional force is 980 N.
(b) The minimum coefficient of static friction is 0.27, which is needed to prevent slipping at the base.
(c) The direction of the contact force is 1016 N.
∈(t) = 0
N₂ ( L sinθ ) = 800 ( [tex]\frac{L}{3}[/tex] cosθ )
N₂ = 267.7 N
(a) Normal force F(d) = N₂ = 267.7 N
Frictional force N = 800 + 180
N = 980 N
(b) The minimum coefficient of static friction,
F(d) = μ N₁
μ = F / N₁
μ = 267.7 / 980
μ = 0.27
(c) The direction of the contact force,
R = [tex]\sqrt{(980)^{2} + (267.7)^{2} }[/tex]
R = 1016 N
To learn more about Coefficient of static friction, Here :
https://brainly.com/question/24173409?referrer=searchResults
#SPJ4
a simple pendulum is 4.00 m long. (a) what is the period of small oscillations for this pendulum if it is located in an elevator accelerating upward at 6.00 m/s2?
The time period of the small oscillations for the simple pendulum is found to be 3.14 seconds.
The pendulum is located in an elevator that is accelerating upwards with an acceleration of 6m/s² and length of the pendulum is 4m.
Because the elevator is accelerating in the upper direction the net acceleration of the pendulum will be (10 + 6)m/s².
The period of small accelerations for this pendulum will be given by the relation,
T = 2π(l/a)
Where, l is the length of pendulum and a is the net acceleration.
Putting values,
T = 2π(4/16)
T = 2π(1/2)
T = π seconds.
T = 3.14 seconds.
So, the time period of this small oscillations for this pendulum is 3.14 second.
To know more about oscillations, visit,
https://brainly.com/question/12622728
#SPJ4
Study the following systems: SYSTEM A: Electricity is used to heat a hot plate which heats water making steam which powers a turbine and a generator which makes electricity which is used to power a radio. SYSTEM B: Electricity is used to power a radio. Which system (A or B) is more energy efficient and explain why.
The system that is more energy efficient is system A because it makes use of electricity to produce more results.
What is energy efficiency?Energy efficiency is the use of less energy to perform the same task or produce the same result.
Energy-efficient homes and buildings use less energy to heat, cool, and run appliances and electronics, and energy-efficient manufacturing facilities use less energy to produce goods.
Energy efficiency has the following benefits:
It saves moneyIt increases the resilience and reliability of the electric gridIt provides environmental, community, and health benefitsAccording to this question, the following applies:
SYSTEM A: Electricity is used to heat a hot plate which heats water making steam which powers a turbine and a generator which makes electricity which is used to power a radioSYSTEM B: Electricity is used to power a radioBased on the above explanation, it can be observed that system A is more energy efficient because it uses the same electricity to achieve more.
Learn more about energy efficiency at: https://brainly.com/question/28939461
#SPJ1
newton's second law in 1 dimension: what magnitude net force is required to accelerate a 1200-kg car uniformly from 0 m/s to 27.0 m/s in 10.0 s?
The required force is F = 3240 N.
As a result,
1200 kg is the car's mass.
Initial speed of the vehicle, u = 0.
The car's final speed is 27 meters per second.
Thus we have to first calculate the acceleration and then substitutes its value in the force formula
Taking time, t = 10 s
F = m a, where a represents the vehicle's acceleration, is the formula for the required force.
a= v - u / t
thus a = 27 - 0/ 10
a = 27/ 10
F = 1200 X 27 / 10
F = 3240 N.
Therefore, this is the necessary solution.
To know more about force you may visit the link:
https://brainly.com/question/28875770
#SPJ4
a simple harmonic oscillator takes 11.5 s to undergo five complete vibrations. (a) find the period of its motion. s (b) find the frequency in hertz. hz (c) find the angular frequency in radians per second. rad/s
The required values are a) T = 2.3 seconds, b) f = 0.434 Hz, c) ω = 2.7 rd/s.
Which of the following motions is simply harmonic?Simple harmonic motion, a particular kind of periodic motion in which a particle repeatedly oscillates around a mean location, In U-tube oscillating liquid column motion is hence simple harmonic.
According to question:Given,
Time = 11.5 seconds to five complete vibrations.
a) Time period is time taken to complete one vibration,
So T = 11.5/5 = 2.3 seconds
b) Frequency(f) = 1/T
f = 1/2.3 = 0.434 second inverse.
c) By using formula of angular frequency ω = 2π/T
ω = 2π/2.3 = 2.7 hz
Thus, final values are a) T = 2.3 seconds, b) f = 0.434 second inverse, c) ω = 2.7 rd/s.
To know more about simple harmonic motion visit:
brainly.com/question/28208332
#SPJ4
9. A piece of iron with a mass of 9.8 g has an initial temperature of 32.6°C. As it is heated, it absorbs 365J of energy. What is the final temperature of the iron? (The specific heat of iron is .46 J/g °C)
The final temperature of the piece of iron with the mass of 9.8 grams on the absorption of 365J of energy is 113.56°C.
What is Specific heat capacity?
The specific heat capacity of a material can be defined as the quantity of heat energy (J) which is absorbed per unit mass (kg) of the material when its temperature is increased by 1 K (or 1 °C). The SI unit of specific heat capacity is J/(kg K) or J/(kg °C).
The specific heat capacity of a material can be calculated by the formula:
Q = m × c × ΔT
where, Q = heat energy,
m = mass of the material,
c = specific heat capacity,
ΔT = change in temperature
The final temperature of the piece of iron can be calculated by the formula:
Q = m × c × ΔT
ΔT = (Final temperature - initial temperature)
365J = 9.8 × 0.46 × ΔT
365J = 4.508 × ΔT
ΔT = 80.96
ΔT = Final temperature = initial temperature
ΔT = (T - 32.6)
80.96 = (T - 32.6)
T = 80.96 + 32.6
T = 113.56°C
Therefore, the final temperature of the piece of iron is 113.56°C.
Learn more about Specific heat here:
https://brainly.com/question/11297584
#SPJ1
by studying distant galaxies in the 1920s, hubble made what important discovery that led us to conclude that the universe is expanding?
All galaxies outside the Local Group are moving away from us, and the farther away they are, the faster they're going.
How is Hubble's law defined?We may learn a lot about the nature of the cosmos from Hubble's rule, which states essentially that a known universe velocity (or, as it is commonly displayed, its redshift) is precisely proportionate to its distance. The relationship between distance and speed should not exist if the cosmos is constant and unchanging.
What is the name of Hubble's theory?The Hubble-Lemaître law, commonly referred to as Hubble's law, is the finding in astrophysics that planets are eloping from Earth at rates proportionate to their separation. In other words, they are travelling away from Earth more quickly the more away they are.
To know more about Hubble visit:
https://brainly.com/question/29766816
#SPJ4
what are the magnitude and location (with respective to point a) of the resultant force on the horizontal gate? the gate width is w. fluid density is r. you can leave your answer in terms of variables (w, r, and g).
The magnitude and location of the resultant force on the horizontal gate is: F = w * r * g, and Point A.
What is magnitude?Magnitude is a measure of the size or intensity of a physical quantity. It is usually defined as the absolute value of the numerical value of the physical quantity, and is often expressed in terms of a unit of measurement. Magnitude can refer to a variety of different physical quantities, such as size, intensity, brightness, or energy. Magnitude can also refer to the relative size or intensity of two or more physical quantities, when compared to each other.
The resultant force on the horizontal gate is equal to the sum of the hydrostatic forces acting on the gate.
Since the gate is horizontal, the hydrostatic forces acting on the gate will be equal to the pressure difference between the top and bottom of the gate.
This pressure difference is equal to the product of the fluid density, gravitational acceleration, and the gate width.
Therefore, the magnitude of the resultant force on the gate will be:
F = w * r * g
The location of the resultant force on the gate will be at the center of the gate, which is point A.
Therefore, the magnitude and location of the resultant force on the horizontal gate is: F = w * r * g, and Point A.
To learn more about magnitude
https://brainly.com/question/24468862
#SPJ4
Question 8 of 20
You heat a pot of water on a gas stove. Not all the energy from the
combustion of the gas is transformed into thermal energy. What happens to
the rest of the energy released when the gas burns?
OA. It is transformed into light energy.
OB. It is transformed into chemical energy.
C. It is transformed into electrical energy.
OD. It is transformed into nuclear energy.
SUBMIT
Answer:
None of the choices you provided are correct. When a gas burns, it releases energy in the form of heat and light. Some of this energy is transferred to the pot of water, increasing its temperature, but some of the energy is also released as light. However, the rest of the energy is not transformed into chemical, electrical, or nuclear energy. Instead, it is lost to the environment in the form of waste heat. This is why gas stoves can become hot to the touch - they are releasing excess energy in the form of heat that is not being used to heat the pot of water.
Explanation:
what is the equation describing the motion of a mass on the end of a spring which is stretched 8.8 cm from equilibrium and then released from rest, and whose period is 0.66 s ? assume that the displacement at the start of the motion is positive.
Answer:
x = A cos ω t at t = zero, x displacement equals amplitude
x = .088 m cos ω t describes the motion
We need yet to find ω in terms of P which is given
ω = √(k / m)
P = 1 / f and f = ω / (2 π)
Thus ω = 2 π f = 2 π / P since 1 / f = P
This gives us
x = .088 m cos 2 π / .66 * t
A 1.5 kg block is on a 15° frictionless incline plane.
a) What is the normal force?
b) What is the downhill force?
c) What is the acceleration?
Answer:
Below
Explanation:
Normal force will be mg cos 15° = 1.5*9.81 cos 15° Newtons
Downplane force will be mg sin 15° = 1.5 * 9.81 sin 15° N
Acceleration
F = ma
F/m = a
1.5 ( 9.81) sin 15° / 1.5 m/s^2 = a
a wall of a small house is 3 meters by 3 meters and is insulated using material that is similar to styrofoam (see table above). the styrofoam is about 2.5 cm thick. a heater inside the house keeps the temperature at 25 c while it is 0 c outside the shed. how much power in watts does the heater use just to make up for the heat lost through this one wall.
The heater needs to provide 540 W of power just to make up for the heat lost through this one wall.
What is Styrofoam?Styrofoam is a trademarked brand of foam insulation and craft material manufactured by the Dow Chemical Company. It is made from expanded polystyrene (EPS) beads that are fused together with steam and pressure. EPS is a lightweight and rigid material that is used for insulation, packaging, and soundproofing. Its properties make it an ideal material for crafting, floristry, model building, and other art projects. Styrofoam is stable in most environments and is resistant to water, oil, and most chemicals. It can be cut, shaped, and painted easily and is an excellent thermal insulator. In addition, it is also non-toxic and non-carcinogenic, making it a safe and economical choice for many applications.
Assuming that the wall is a perfect insulator, the heater will have to provide enough power to make up for the heat lost due to conduction and convection. The rate of heat loss per unit area is given by:
Q = λ*A*(T2 - T1)/d
Where:
λ = thermal conductivity of styrofoam (see table above)
A = Area of wall (3*3) = 9 m2
T2 = Temperature inside the house (25C)
T1 = Temperature outside the house (0C)
d = thickness of styrofoam insulation (2.5 cm)
Plugging in the values we get:
Q = 0.045*9*(25-0)/0.025 = 540 W
Therefore, the heater needs to provide 540 W of power just to make up for the heat lost through this one wall.
To learn more about Styrofoam
https://brainly.com/question/29332536
#SPJ4
what is the kinetic energy of a 60.0 g tennis ball traveling at 177.0 kilometers per hour? report your answer in joules (j).
The kinetic energy is 939.87 J.
what is kinetic energy?Kinetic energy is the power that an object has as a result of motion. If we want to accelerate an object, we have to exert force. Applying force requires effort on our part. The object will be moving at a new, constant speed once the work is done because energy has been transferred to it.
A particle, an object, or a collection of particles can move because of kinetic energy, which is the force that drives motion. Kinetic energy is used by objects in motion like a person walking, a baseball being thrown, food falling from a table, and charged particles in an electric field.
Kinetic energy = 1/2mv²
Kinetic energy = 1/2×0.06×177²
Kinetic energy = 939.87 J.
To know more about kinetic energy visit:
https://brainly.com/question/26472013
#SPJ4
the force between between two objects increases by what factor if the distance between them is changed 4.5 times the original separation?
The new gravitational force between the object will be 1/20.25 times of the original force.
The gravitational force between any two object is defined as the product of the masses of the object and it is inversely proportional to the square of the distance between them which is given by,
F = GMm/R²
Here,
G is the universal gravitational constant, M and m are the mass of the body and R is the distance between them.
As per the given question the distance between the object is increased 4.5 times the original separation.
R' = 4.5R.
The new force of attraction between the object will be,
F' = GMm/(R')²
F' = GMm/(4.5R)²
F' = GMm/20.25R²
F' = F/20.25
So, the new force of attraction between the two objects will become 1/20.25 times of original force.
To know more about gravitational force , visit,
https://brainly.com/question/24783651
#SPJ4
a uniform meter stick of mass 24 g with two weights hanging from it is balanced on a knife edge at the 40 cm mark. a weight of mass 96 g hangs from the 9 cm mark. at which cm mark must the other weight of mass 96 g be located to keep the meter stick balanced?
The second weight of mass 96 g must be located at the 9 cm mark on the meter stick to keep it balanced.
To determine the location of the second weight that will keep the meter stick balanced, we need to consider the principles of equilibrium.
The weight of the meter stick can be calculated as follows:
Weight of meter stick = mass * acceleration due to gravity
= 24 g * 9.8 m/s^2
= 235.2 N
The total weight of the two hanging weights is 96 g + 96 g = 192 g = 1.92 N.
The sum of the forces acting on the meter stick is equal to zero when:
235.2 N + 1.92 N = 0
This equation tells us that the sum of the forces acting on the meter stick is equal to zero when the total weight of the two hanging weights is equal to the weight of the meter stick.
To determine the location of the second weight, we also need to consider the moments about the pivot point. The moment of a force is calculated as the product of the force and the distance from the pivot point. The moments about the pivot point are equal to zero when the sum of the moments of the forces on one side of the pivot point is equal to the sum of the moments of the forces on the other side of the pivot point.
The moment of the weight of the meter stick about the pivot point is calculated as follows:
Moment of the weight of meter stick = force * distance from pivot point
= 235.2 N * 0.4 m
= 94.08 N*m
The moment of the weight hanging from the 9 cm mark about the pivot point is calculated as follows:
Moment of weight hanging from 9 cm mark = force * distance from pivot point
= 1.92 N * 0.09 m
= 0.1728 N*m
To keep the meter stick balanced, the moment of the second weight must be equal in magnitude but opposite in direction to the moment of the weight hanging from the 9 cm mark. The moment of the second weight can be calculated as follows:
Moment of second weight = force * distance from pivot point
= 1.92 N * distance from pivot point
Substituting the value of the force and setting the moment equal to the negative of the moment of the weight hanging from the 9 cm mark, we get the following equation:
1.92 N * distance from pivot point = -0.1728 N*m
Solving for the distance from the pivot point, we find that the second weight must be located at a distance of 0.09 m from the pivot point, or 9 cm. This is the same distance from the pivot point as the weight hanging from the 9 cm mark.
Therefore, the second weight of mass 96 g must be located at the 9 cm mark on the meter stick to keep it balanced.
Learn more about Mass here:
https://brainly.com/question/19385703
#SPJ4
a vertical spring has a spring constant of 100 n/m. when an object is attached to the bottom of the spring, the spring changes from its unstretched length of 0.50 to a length of 0.65 m. the magnitude of the weight of the object is
Answer: Hookes law states F=kX where F is the force applied, k is the spring constant, and X is the extension of the spring from its resting point.Substituting the values in, we get:F=100*(0.65-0.5)=100*0.15=15N
a 6.2 kg object heading north at 3.0 m/s collides with an 8.0 kg object heading west at 3.5 m/s. if these two masses stick together upon collision, what is their velocity after collision?
The velocity of both objetcs after the collision is 3.07m/sec if both object masses are 6.2 kg and 8.0kg respectively.
To find the velocity of both objects we need to conserve the momentum. We need to follow the law of conservation of momentum which states that initial momentum is equal to final momentum.
Now, we know that momentum =mass × velocity
So, initial momentum of first object=6.2×3=18.6Kg-m/sec
Similarly, initial momentum of second object=8×3.5=28.0kg-m/sec
Now, it is given that both object stick together, so total mass of both objects are=(6.2+8)=14.2kg
Now, both objects are moving with common velocity, so assume both have velocity v
=>So, final momentum of both objects is =14.2×v
according to law of conservation of momentum
=>18.6+25=14.2v
=>43.6=14.2v
=>v=43.6/14.2
=>v=3.07m/sec
Hence, final velocity of objects are 3.07m/sec.
To know more about velocity, visit here:
https://brainly.com/question/18084516
#SPJ4
