Answer:
A. Fusion
Explanation:
Why would the electrolysis reaction stop if the battery was removed
If the battery was removed, the energy produced by the battery would not be able to continue its path along the circuit.
Use the activity series below to predict whether the following reactions will take place.
Answer:
first one is yes, second one is no
Explanation:
edge
4Fe (s) + 3 O2 (g) → 2 Fe2O3 (s)
A. What is the oxidation number for each item in this equation?
B. What is being oxidized?
C. What is being reduced?
D. What is the oxidizing agent?
E. What is the reducing agent?
Explanation:
The number acquired by an element after the lose or gain of an electron is called oxidation number.
For example, [tex]4Fe(s) + 3O_{2}(g) \rightarrow 2Fe_{2}O_{3}(s)[/tex]
Here, oxidation number of Fe(s) is 0 and Fe in [tex]Fe_{2}O_{3}[/tex] is +3.
Oxidation number of O in [tex]O_{2}(g)[/tex] is 0 as it is present in its elemental state.
The oxidation number of O in [tex]Fe_{2}O_{3}[/tex] is calculated as follows.
[tex]2(3) + 3x = 0\\6 + 3x = 0\\x = \frac{-6}{3}\\= -2[/tex]
Hence, oxidation number of O in [tex]Fe_{2}O_{3}[/tex] is -2.
The loss of electrons by an element or substance is called oxidation. Here, electrons are being lost by Fe(s) as an increase in oxidation state is occurring. So, Fe(s) is oxidized.The gain of electrons by an element or substance is called reduction. Here, electrons are being added to [tex]O_{2}[/tex] as a decrease in its oxidation state is occurring. So, [tex]O_{2}[/tex] is reduced.An element or compound which is being reduced is called oxidizing agent. Here, [tex]O_{2}[/tex] is the oxidizing agent.An element or compound which is being oxidized is called reducing agent. Here, Fe(s) is the reducing agent.Based on your understanding of how bond types influence a material’s properties, identify each of the following compounds as being made of ionic, covalent, or metallic bonds.
ANSWER
Steel: Metalic
Propane: Covalent
Calcium chloride: ionic
Water: Covalent
Edge 2021
Answer: The given compounds are identified as being made of ionic, covalent, or metallic bonds:
Steel - Metallic bondsPropane - Covalent bondsCalcium chloride - Ionic bondsWater - Covalent bondsExplanation:
A bond formed by transfer of electrons from one atom to another is called an ionic bond. An ionic bond is formed between a metal atom and a non-metal atom.
A bond formed by transfer of electrons from one atom to another is called a covalent bond. A covalent bond is formed between two or more non-metal atoms only.
Steel is actually an alloy of carbon and iron where there is less than 2% carbon, 1% manganese and small amounts of silicon, phosphorus, oxygen and sulphur are present.
When atoms of metals are held together then bond formed between these atoms is called metallic bond.
Hence, steel is made of metallic bond.
Chemical formula of propane is [tex]CH_{3}CH_{2}CH_{3}[/tex] as there are only non-metal atoms are present. So, sharing of electrons takes place in such atoms due to which covalent bonding will be there.
Hence, propane is made up of covalent bonds.
Calcium chloride contains a metal and a non-metal atom. This means that electrons are being transferred from calcium atom to the chlorine atom. Hence, bond present in calcium chloride is ionic bond.
Water has chemical formula [tex]H_{2}O[/tex]. Since, non-metal atoms are present there so sharing of electrons takes place between hydrogen and oxygen atoms. Hence, covalent bond is present in water.
Thus, we can conclude that given compounds are identified as being made of ionic, covalent, or metallic bonds:
Steel - Metallic bondsPropane - Covalent bondsCalcium chloride - Ionic bondsWater - Covalent bondsSteel: ✔ metallic
Propane: ✔ covalent
Calcium chloride: ✔ ionic
Water: ✔ covalent
Once upon a time, a mother duckling sat on her eggs with great impatience. How long would it be before they hatched? Finally, one summer day, the mother duckling watched as the eggs cracked, and her cute, yellow ducklings waddled into the world. She was filled with joy until she noticed that one egg, which was larger than all of the others, remained. After many hours, the egg cracked. A large, gray duckling emerged. The mother duck was horrified at the duckling's appearance. The mother duck's only comfort was that the ugly duckling could swim and dive under the water.
As the ugly duckling grew, many animals in the pond criticized him. His feathers were too dark, his neck was too long, and his body was too big. His fellow ducklings refused to recognize that underneath the feathers, the ugly duckling was kind, good, and gentle. The ugly duckling shed many tears because none of the other animals would play with him.
Read this excerpt from the fairy tale The Princess and the Pea.
One evening, there was a terrible storm. The wind howled, thunder shook the stone walls, and lightning filled the dark night sky. Through the pelting of the rain, there came a knock at the door. When the king opened the door, he saw a bedraggled girl, soaked to the skin and covered in mud. He ushered her into the castle so that she could warm herself by the fire.
"Why is a young servant girl like you wandering about on such a ferocious night?" queried the king.
The disheveled maiden looked at the king in disbelief. "I am a princess, come to see the prince," she explained, all the while shivering.
The king summoned his wife, the queen, for advice. The queen looked at the hideous creature in disbelief, thinking that no princess would ever allow herself to be found in such a state.
How do the authors illustrate the theme that people should not be judged based on their appearances?
Both authors show that the main characters are not afraid of getting wet and dirty in order to live active lives.
Both authors show the main characters being labeled in a negative manner based on their appearances.
Both authors showed the main characters exercising patience with other people.
Both authors showed the main characters wanting to make friends with others.
Answer:
Im not 100% sure this is correct but i think the answer would be
Both authors show the main characters being labeled in a negative manner based on their appearances.
Explanation:
because
both the ugly ducking and the princess are not in the best conditions so i think that would be why that is the answer choice
Answer: i think it's Both authors show the main characters being labeled in a negative manner based on their appearances.
Explanation: they both are being labeled in a negative manner so that's your answer your welcome
Take two samples, one is oil and other is water. Mix the two. You observe that?
Answer:
Explanation:mckxmmxkmsskkskskskxisisisisisisisks
which of the following is a property of acids
A. they are slippery
B. They taste bitter
C. They react with oils
D. they are sour
Answer:
They are sour. =)
Explanation:
A set of charged plates is
separated by 8.08*10^-5 m. When
2.24*10^-9 C of charge is placed
on the plates, it creates a potential
difference of 855 V. What is the
area of the plates?
(The answer is _*10^-5 m^2. Just fill
in the number, not the power.)
Answer:
2.39×10¯⁵ m²
Explanation:
From the question given above, the following data were obtained:
Distance (d) = 8.08×10¯⁵ m
Charge (q) = 2.24×10¯⁹ C
Potential difference = 855 V
Area(A) =?
NOTE: Permittivity (ε₀) = 8.854×10¯¹² F/m
The area can be obtained as follow:
q = ε₀AV/d
2.24×10¯⁹ = 8.854×10¯¹² × A × 855 / 8.08×10¯⁵
2.24×10¯⁹ = 7.57×10¯⁹ × A / 8.08×10¯⁵
Cross multiply
7.75×10¯⁹ × A = 2.24×10¯⁹ × 8.08×10¯⁵
7.75×10¯⁹ × A = 1.81×10¯¹³
Divide both side by 7.75×10¯⁹
A = 1.81×10¯¹³ / 7.75×10¯⁹
A = 2.39×10¯⁵ m²
Thus, the area of the plate is 2.34×10¯⁵ m²
Answer:
2.39
Explanation:
How many significant digits are in the value 0.0050340?
Answer:
6
Explanation:
6, because the number after decimals are considered significant but the 0 after the last number is not significant.
The word habitable is defined as:
what is a metal ore?
Answer:
metal ores are naturally occurring rocks that contain metals or metal compounds in sufficient amounts to make it worthwhile extracting them
What does every weak base have?
has a Acids Bases
HCl LiOH
HBr NaOH
HI KOH
HNO 3
are there other universes ??
Answer:
Some theories say that there is only one universe and that everything is inside the universe and there is nothing outside the universe but some other theories say that there are more Universes which has the opposite copy of all the planets in our universe.
A student wrote a chemical equation as shown.
2H₂S+ 302 H₂O + SO₂
What should the student do to balance the equation?
Answer: The student must add 2 infront of both [tex]H_2O[/tex] and [tex]SO_2[/tex] to make the equation balanced.
Explanation:
A balanced chemical equation is one where all the individual atoms are equal on both sides of the reaction. It follows the law of conservation of mass.
For the given unbalanced chemical equation:
[tex]2H_2S+3O_2\rightarrow H_2O+SO_2[/tex]
On the reactant side:
Atoms of H = 4
Atoms of S = 2
Atoms of O = 6
On the product side:
Atoms of H = 2
Atoms of S = 1
Atoms of O = 3
To balance the equation, a student must balance the atoms by adding 2 infront of both [tex]H_2O[/tex] and [tex]SO_2[/tex]
For the balanced chemical equation:
[tex]2H_2S+3O_2\rightarrow 2H_2O+2SO_2[/tex]
Use the reaction N2(g) + 3H2(g) 2NH3(g) to answer the following questions
a. 1 pt: What does Le Châtelier's principle predict would happen to the equilibrium conditions if N2(g) + 3H2(g) were added to the system?
b. 1 pt: What would happen to the equilibrium if the pressure were decreased?
c. 2 pts: Write the equation for calculating Keq
d. 3 pts: Calculate the value for Keq given the following concentrations
[NH3] = 6 M
[H2] = 4 M
[N2] = 3 M
Answer:
cvbn
Explanation:
The lightest particle among the following is :
The question is incomplete, the complete question is;
The lightest particle among the following is:
• Electron •Proton • Neutron • Alpha
Answer:
Electron
Explanation:
There three basic subatomic particles are electrons, protons and neutrons. Both protons and neutrons are found in the nuclear and both contribute towards the mass of the atom. The alpha particle has the same mass as the helium nucleus.
However, the electrons are found in orbiit and have a negligible mass compared to the mass of the protons and neutrons. The mass of the electron is about 9.11 × 10^-31 Kg. This makes it the lightest of all the particles listed among the options.
Atoms are attracted to each other because____
A) electrons are attracted to protons because they have opposite charges
B) magnets pull them together
C) the protons are attracted to each other because they have the same charge
D) they have some energy
SOMEONE PLEASE HELP:/!
Answer:
A
Explanation:
Opposite charges attract therefore the electrons of one atom would be attracted by the nucleus (which contains protons). This heavily relies on a property called electronegativity. Which deals with the level of attraction a nucleus (the protons in the nucleus) have for electrons of other atoms.
Ventilation is governed by Boyle's Law, which states that at a constant temperature Multiple choice question. the solubility of a gas is inversely proportional to its volume. the pressure of a gas is directly proportional to its volume. the pressure of a gas is inversely proportional to its volume. the solubility of a gas is directly proportional to its volume.
Answer:
the pressure of a gas is directly proportional to its volume.
Explanation:
Robert Boyle was an Irish chemist and is famously referred to as the first modern chemist. He was born on the 25th of January, 1627 in Lismore, Ireland and died on the 31st, December 1691, London, United Kingdom.
Boyles states that when the temperature of an ideal gas is kept constant, the pressure of the gas is inversely proportional to the volume occupied by the gas.
Mathematically, Boyles law is given by;
[tex] PV = K[/tex]
[tex] P_{1}V_{1} = P_{2}V_{2} [/tex]
Where;
P1 is the original pressure.
P2 is the final pressure.
V1 is the original volume.
V2 is the final volume.
This ultimately implies that, ventilation which is typically governed by Boyle's Law, which states that at a constant temperature the pressure of a gas is directly proportional to its volume.
What are two examples of mechanical waves?
• Radio
• Water
• Light
•Sound
Answer:
radio and sound
Explanation:
Because they are waves in motion
A person throws a 0.44-kg ball straight up into the air. It reaches a height of 9
m. What is the force on the ball as it begins to fall? (The acceleration due to
gravity is 9.81 m/s2)
A. 2.06 N
B. 2.48 N
C. 4.32 N
0 D. 1.18N
C - 4.32
Explanation:
.44 x 9.81
Which method involves separating a solution by liquids moving across a selectively permeable membrane?
Distillation
Chromatography
Fractionation
Osmosis
Answer:
OSMOSIS
Explanation:
Osmosis (/ɒzˈmoʊ.sɪs/) is the spontaneous net movement or diffusion of solvent molecules through a selectively permeable membrane from a region of high water potential (region of lower solute concentration) to a region of low water potential (region of higher solute concentration),
An electric kettle draws a current of 6.50 A while it is plugged into a 120-V
electrical outlet. What power does the kettle use?
Answer:
780 watts
Explanation:
formula to find power when given amps and voltage
P = A x V
=6.50a x 120V
= 780 W (watts)
A compound being used in experimental medicine is 78.14% boron (B) and 21.86% hydrogen (H). The empirical formula of the compound will have a boron to hydrogen ratio of
Explanation:
hope the picture above help u understand :)
Identify all of the gas law equations that relate to the ideal gas law.
**Check for the proof photo at the bottom.**
**Answers are in bold.**
__________________________________________________________
Answers on the left:Identify all of the gas law equations that relate to the ideal gas law.
3. V₁/T₁=V₂/T₂
4. V₁/n₁=V₂/n₂
5. P₁V₁=P₂V₂
7. P₁/T₁=P₂/T₂
__________________________________________________________
Answers on the right:A balloon containing 0.0400 mol of a gas with a volume of 500 mL was expanded to 1.00 L. Answer the questions and round answers to nearest hundredth place. Which equation should you use to find the amount of gas added?
B. n₂=V₂n₁/V₁
What is the final number of moles?
0.08 mol
__________________________________________________________
Explanation:The ideal gas law is Boyle's law, Charles's law, Gay-Lussac's law, and Avogadro's law combined into one equation. Avogadro's law is V₁/N₁=V₂/N₂, Charles's law is V₁/T₁=V₂/T₂, Gay-Lussac's law is P₁/T₁=P₂/T₂, and Boyle's law is P₁V₁=P₂V₂.
For the balloon problem, B is the correct answer because we are looking for the final moles of gas added. Answer B gives the equation that equals n₂, n₂ means final number of moles. The problem gives us initial volume (500 mL), final volume (1 L), and initial moles amount (0.04 mol). Plug these numbers into the equation, n₂=V₂n₁/V₁, using consistent units. Note that V₁=initial volume, V₂=final volume, n₁=initial moles, and n₂=final moles
Here's a photo of Edge just incase.
There are moles of Carbon if I have 2.25 x 1023 atoms of Carbon? A. 0.19 moles b. 5.38 moles c. 0.37 moles d. 2.67 moles
Answer:
c. 0.37 moles
Explanation:
To find the number of moles (n) in a certain number of atoms of a substance, we divide the number of atoms by Avogadro number (nA), which is 6.02 × 10²³ atoms.
That is,
n = number of atoms ÷ 6.02 × 10²³
According to this question, there are 2.25 x 10²³ atoms of carbon (C). The number of moles contained in this carbon is as follows:
n = 2.25 x 10²³ ÷ 6.02 × 10²³
n = 2.25/6.02 × 10 (23 - 23)
n = 0.374 × 1
n = 0.374moles
PLEASE HELP !!!
Which of the following measurements is used to measure the enthalpy of combustion?
A. Measuring the change in temperature when two liquids are mixed.
B. None of these
C. Measuring the change in temperature of a beaker of water.
D. It cannot be measured, only calculated using the equation: q = mc∆T.
Explanation:
measuring the change of temperature when 2 liquids are mixed
1.2 Give two ways that somebody could get Salmonella food poisoning.
Answer: Raw meat, poultry and seafood. Feces may get onto raw meat and poultry during the butchering process. ...
Raw eggs. ...
Fruits and vegetables.
Explanation:
what are some different natural events and man-made activities that can affect ocean acidification?
Ocean acidification is the process of decreased pH levels of the oceans. The burning of fossil fuels and industrialization are man-made activities that lead to this process.
What is Ocean acidification?Ocean acidification is an increased concentration of acidic components of the oceans due to an increase in the carbon dioxide level of the oceans.
Human activities like cutting down a large number of trees, discharging from industrial outlets, and burning fossils like petrol, coal, diesel, etc. are leading to increased acidification of the oceans.
Therefore, natural causes like increased salinity, flood, and earthquake are the reasons for oceanic acidification.
Learn more about ocean acidification here:
https://brainly.com/question/7604502
Part C
For each source of energy, describe its strengths and weaknesses with respect to the ideal source you described in part A. Do Internet research, as needed, to describe each energy source.
Question 1
Describe at least two advantages and two disadvantages of using natural gas as a source of energy.
Answer:
See explanation
Explanation:
Natural gas is mined along with crude oil in many oil wells. It has the advantage of being a cheap fossil fuels which is easily obtainable.
Generally, natural gas is the cleanest of all the fossil fuels. This means that it is the fossil fuel that least contributes to environmental pollution.
On the other hand; natural gas produces some amount of sulphur as it is burnt and mercury as particulate matter. These substances are quite dangerous to health.
Secondly, the combustion of natural gas leads to the production of the oxides of nitrogen which play a key role in the occurrence of photochemical smog.
A gas has a volume of 1000.0 mL at a temperature of 20.OK and a pressure
of 1.0 atm. What will be the new volume when the temperature is changed
to 40.0K and the pressure is changed to
0.5 atm?
Answer:
4000mL
Explanation:
Using the combined gas law equation as follows:
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressure (atm)
P2 = final pressure (atm)
V1 = initial volume (mL)
V2 = final volume (mL)
T1 = initial temperature (K)
T2 = final temperature (K)
According to the information given in this question:
V1 = 1000mL
T1 = 20K
P1 = 1.0atm
V2 = ?
P2 = 0.5atm
T2 = 40K
Using P1V1/T1 = P2V2/T2
1 × 1000/20 = 0.5 × V2/40
1000/20 = 0.5V2/40
50 = 0.5V2/40
50 × 40 = 0.5V2
2000 = 0.5V2
V2 = 2000/0.5
V2 = 4000mL
