Answer:
a) Heat energy is absorbed.
Explanation:
What occurs in endothermic reactions?
a) Heat energy is absorbed. YES. This is the definition of an endothermic reaction.
b) Water is produced. NO. Endothermic refers to the heat absorbed and not to the products formed.
c) Oxygen is produced. NO. Endothermic refers to the heat absorbed and not to the products formed.
d) Heat energy is released. NO. This is known as an exothermic reaction.
Pablo, whose mass is 60 kg, is moving along at a velocity of 8 m/s. How much kinetic energy does he have?
Answer:
1920 Joules
Explanation:
* means multiply
^ means exponent
kinetic energy is in Joules or J
kinetic energy = 1/2 * mass * (velocity)^2
kinetic energy = 1/2 * 60 * (8)^2
kinetic energy = 1/2 * 60 * (8*8)
kinetic energy = 1/2 * 60 * (64)
kinetic energy = 1920 Joules or 1920 J
Answer:
KE = 1920 J
General Formulas and Concepts:
Energy
Kinetic Energy Formula: [tex]\displaystyle KE = \frac{1}{2}mv^2[/tex]
m is mass (in kg)v is velocity (in m/s)Explanation:
Step 1: Define
[Given] m = 60 kg
[Given] v = 8 m/s
Step 2: Find KE
Substitute in variables [Kinetic Energy Formula]: [tex]\displaystyle KE = \frac{1}{2}(60 \ kg)(8 \ m/s)^2[/tex]Evaluate: [tex]\displaystyle KE = 1920 \ J[/tex]Topic: AP Physics 1 Algebra-Based
Unit: Energy
What is the name for CH 3 CH 2 COCHCH 3 CH(CH 3 ) 2 ?
Answer:
Butanoic acid
Explanation:
The IUPAC name of CH3CH2CH2COOH is:
The IUPAC name for a given compound is Butanoic acid.
Assign priorities in the following set of substituents according to Cahn-Ingold-Prelog rules.
-OCH3 -Br -Cl -CH2OH
А B C D
(Provide your ranking through a string like abcd, starting with the one with the highest priority).
Answer:
Assign priorities in the following set of substituents according to Cahn-Ingold-Prelog rules.
-OCH3 -Br -Cl -CH2OH
Explanation:
To give priorities for the substituents that are attached to chiral carbon and to assign either R or S-configuration the following rules were proposed:
1. The atom with the highest atomic number is given first priority.
2. If the Groups attached to chiral carbon are having the same first atom, then check for the atomic number of the second atom.
Among the given groups,
-Br has the highest atomic number, so it is given first priority.
Then, -Cl.
Then, -OCH3
and the last one is -CH2OH.
Hence, the order is :
BCAD.
Using the boh model of a He ion, what transition is most likelu to result in the emission of radiation with a wavelength of approximately 274 nm
Answer:
[tex]n=6\ to\ n=3[/tex]
Explanation:
From the question we are told that:
Wavelength [tex]\lambda=274 *10^{-9}m[/tex]
Bohr's constant [tex]R = 1.097 × 10^7 / m (or m−1)[/tex]
Helium atom [tex]z=2[/tex]
Generally the equation for Wavelength is mathematically given by
[tex]\frac{1}{\lambda}=Rz^2(\frac{1}{nf^2}-\frac{1}{nf^2})[/tex]
[tex]0.083=(\frac{1}{nf^2}-\frac{1}{nf^2})[/tex]
Therefore
The Range of n fall at
[tex]n=6\ to\ n=3[/tex]
What is the best explanation for why solid sodium chloride CANNOT conduct electricity and why molten sodium chloride can?
Answer: See explanation
Explanation:
The explanation for why solid sodium chloride can't conduct electricity while molten sodium chloride can is explained below:
Ionic compounds that are in their solid state like sodium chloride have their ions fixed in position. Due to this reason, the able to move, therefore we can say that the solid ionic compounds cannot be able to conduct electricity.
On the other hand, ionic compounds in their molten state, are free to flow unlike when they're in their solid state and therefore we can say that molten sodium chloride can be able to conduct electricity.
Please help meee! Chemistry!
P=18000000/6 zeros. not sure how to do rest
Explanation:
a) [tex]n = \dfrac{PV}{RT} = \dfrac{(1.8×10^7\:\text{Pa})(3\:\text{L})}{(8310\:\text{L•Pa/mol•K})(300\:\text{K})}[/tex]
[tex]\:\:\:\:\:\:\:= 21.7\:\text{mol}[/tex]
b) [tex]P = \dfrac{nRT}{V}[/tex]
[tex]\:\:\:\:\:\:\:\:\:= \dfrac{(50\:\text{mol})(8310\:\text{L•Pa/mol•K})(300\:K)}{(3\:L)}[/tex]
[tex]\:\:\:\:\:\:\:\:\:=4.2×10^7\:\text{Pa}[/tex]
Name the following compound. Group of answer choices 2-methyl-4-pentyne 4-methyl-3-propyl-1-pentyne 3-isopropyl-1-hexyne 1-nonyne 4-propyl-5-hexyne
The question is incomplete, the complete question is shown in the image attached
Answer:
3-isopropyl-1-hexyne
Explanation:
Organic compounds can be named from the structure of the compound. The name reveals the arrangement of atoms and bonds in the molecule.
If we look at the compound in the question, we will notice that the parent chain contains six carbon atoms, the triple bond is located at position 1 and the isopropyl substituent is attached to carbon 3.
Hence the proper name of the compound becomes, 3-isopropyl-1-hexyne.
what is the molar masses for C8H10N2O4
Answer:
198.2 g/mol
Explanation:
C = 12.01 g/mol
H = 1.01 g/mol
N = 14.01 g/mol
O = 16.00 g/mol
(12.01 x 8) + (10 x 1.01) + (14.01 x 2) + (16.00 x 4) = 198.12 g/mol
Which procedure could a student use to examine an intensive property of a rectangular block of wood
Find the mass.
Record the length. Measure the volume. Determine the density.
Answer:
density
Explanation:
The procedure that the student could use to examine an intensive property of a rectangular block of wood is to determine its density. Density is intensive because it is the ration between the mass and the volume.
Answer: find the mass option A
Explanation:
Which one of the following compounds shows red precipitate of Cu2O with the reaction of Fehling solution?
a. Vinegar c. Glycerine
b. Formalin d. Propanon
Answer:
acetaldehyde
When acetaldehyde is heated with Fehling's solution, a red precipitate is formed.
Explanation:
C3H8 is ________
A. unsaturated
B. saturated
A chemical reaction occurring in a cylinder equipped with a moveable piston produces 0.601 mol of a gaseous product. If the cylinder contained 0.300 mol of gas before the reaction and had an initial volume of 2.16 L, what was its volume after the reaction
Answer:
4.33 L
Explanation:
Assuming ideal behaviour and that all 0.300 moles of gas reacted, we can solve this problem using Avogadro's law, which states that at constant temperature and pressure:
V₁n₂ = V₂n₁Where in this case:
V₁ = 2.16 Ln₂ = 0.601 molV₂ = ?n₁ = 0.300 molWe input the given data:
2.16 L * 0.601 mol = V₂ * 0.300 molAnd solve for V₂:
V₂ = 4.33 LCalculate the moment of inertia of a CH³⁵CL₃ molecule around a rotational axis that contains the C-H bond. The C-Cl bond length is 177pm and the HCCl angle is 107⁰f
Answer:
The correct answer is "[tex]4.991\times 10^{-45} \ kg.m^2[/tex]".
Explanation:
According to the question,
[tex]R_{C-Cl} = 177 \ pm[/tex]
or,
[tex]=1.77\times 10^{-10} \ m[/tex]
[tex]\alpha = 107^{\circ}[/tex]
[tex]m_{Cl}=34.97 \ m.u[/tex]
or,
[tex]=34.97\times 1.66\times 10^{-27}[/tex]
[tex]=5.807\times 10^{-26} \ kg[/tex]
The moment of inertia around the rotational axis will be:
⇒ [tex]I=3\times m_{Cl}\times (R_{C-Cl})^2 \ Sin^2 \alpha[/tex]
By putting the values, we get
[tex]=3\times 5.807\times 10^{-26}\times (1.77\times 10^{-10})^2 \ Sin^2 (107)[/tex]
[tex]=3\times 5.807\times 10^{-26}\times (1.77\times 10^{-10})^2\times 0.91452[/tex]
[tex]=4.991\times 10^{-45} \ kg.m^2[/tex]
? Question
In an ozone molecule, the three atoms must be connected, so there must at least be a single bond between them. Place
dots in pairs around the oxygen atoms until each oxygen atom has eight valence electrons, starting with the atoms on the
outside and doing the central atom last if there are enough. Do not exceed the total number of valence electrons
identified in part A. Remember that the dashes between the oxygen atoms, which represent single bonds, each indicate
the presence of two valence electrons.
A is the answer
In an ozone molecule, the three atoms must be connected, so there must at least be a single bond between them. Place
dots in pairs around the oxygen atoms until each oxygen atom has eight valence electrons, starting with the atoms on the
outside and doing the central atom last if there are enough. Do not exceed the total number of valence electrons
identified in part A. Remember that the dashes between the oxygen atoms, which represent single bonds, each indicate
the presence of two valence electrons
Answer:
Explanation: i did it
11) Methane and oxygen react to form carbon dioxide and water. What mass of water is formed if 0.80 g of methane reacts with 3.2 g of oxygen to produce 2.2 g of carbon dioxide
The following data were obtained using the same procedure as in your experiment. Using these data, calculate the percent malachite in the sample.
FW information (in g/mol): malachite = 221.11; CO2 = 44.01; H2O = 18.02
Mass of crucible: 23.8839 g Mass of crucible + sample: 26.0496 g
Mass of crucible + decomposed sample: 25.7013 g
One molecule of malachite decomposes to make:_______.
___________molecule(s) of copper oxide
___________molecule(s) of carbon dioxide
____________molecule(s) of water
a. 1, 2,2
b. 2, 1, 1
c. 1, 1, 1
d. 1,0.5, 0.5
Answer:
c
Explanation:
Typhoon signals rise due to what? wind speed or wind strength or both?
What are the uses of Sulphuric acid?
Answer:
The major use of sulfuric acid is in the production of fertilizers, e.g., superphosphate of lime and ammonium sulfate. It is widely used in the manufacture of chemicals, e.g., in making hydrochloric acid, nitric acid, sulfate salts, synthetic detergents, dyes and pigments, explosives, and drugs.
The major use of sulfuric acid is in the production of fertilizers, e.g., superphosphate of lime and ammonium sulfate. It is widely used in the manufacture of chemicals, e.g., in making hydrochloric acid, nitric acid, sulfate salts, synthetic detergents, dyes and pigments, explosives, and drugs.
The graph below shows how the temperature and volume of a gas vary when
the number of moles and the pressure of the gas are held constant. How can
the volume of the gas be increased if the pressure is constant?
v
т
A. By increasing the temperature
B. By letting the gas expand over time
C. By letting the gas contract over time
D. By decreasing the temperature
Answer:
D
Explanation:
PV =nRT
So V and T are inversely proportional
Rank each of the following gases in order of increasing urms assuming equivalent amounts and all gases are at the same temperature and pressure where 1 has the lowest urms and 4 has the highest urms.
a. Gas 1 : H2S
b. Gas: He
c. Gas 3: NF3
d. Gas 4: H2O
The Urms refers to the root mean square speed of the gas. The order of increasing Urms for the gases shown in the question; NF3 < H2S < H2O < He.
What is the Urms?The Urms refers to the root mean square speed of the gas. This is ultimately dependent on the relative molecular mass of the gases when they are maintained at the same temperature.
Now, let us look at the order of increasing Urms for the gases shown in the question; NF3 < H2S < H2O < He.
Learnmore about Urms: https://brainly.com/question/365923
Which of the following statements correctly explains why bromination reactions are more selective than chlorination reactions.
a. bromine radical is less stable than chlorine radical, so it is more reactive and less choosy
b. bromine radical is more stable than chlorine radical, so it is more reactive and less choosy
c. bromine radical is more stable than chlorine radical, so it is less reactive and more choosy
d. bromine radical is less stable than chlorine radical, so it is less reactive and more choosy
e. relative radical stability is 3' radicals > 2" radicals> 1 radicals when bromine radicals snatch hydrogens from alkanes, but when chlorine radicals snatch hydrogens the resulting alkyl radical stability is 3 radicals < 2 radicals< 1' radicals
Answer: A bromine radical is more stable than chlorine radical, so it is less reactive and more choosy.
Explanation:
A chlorine atom being more electronegative in nature is able to attract a hydrogen atom more readily towards itself as compared to a bromine atom.
Since bromine is less electronegative in nature so bromine will be more selective as a hydrogen abstracting agent. As a result, bromine radical is more stable in nature than chlorine radical.
Thus, we can conclude that bromine radical is more stable than chlorine radical, so it is less reactive and more choosy.
Draw the skeletal structure for: (E)-hept-5-en-2-one
Answer:
Draw the skeletal structure for: (E)-hept-5-en-2-one
Explanation:
The root word hept indicates that the given compound has seven carons in its longest chain.
-en- primary suffix indicates that the compound has one double bond in it.
2-one indicates that the compound has -C=O bond in the second carbon.
The prefix (E) indicates that the highest priority groups are on the opposite direction of the double bond.
The structure of the given molecule is:
The energy needed to collapse the H-bonding of ice is _____.
it depends on the widths of the recesses, and if it is causing the shelf to fracture and collapse into the sea, then a massive iceberg could be called from the life she,f and the ice shelf are way more important because it holds it up
PLEASE HELP FAST!!!
Which of the following is an acid? (3 points)
Be(OH)2
HCl
LiBr
NH3
Answer:
HCl
Explanation:
I took the test :)
Out of the following compounds , HCl is an acid as it has hydrogen as the proton donor.
Acids are defined as substances which on dissociation yield H+ ions , and these substances are sour in taste.
According to the number of H+ ions which are generated on dissociation acids are classified as mono-protic , di-protic ,tri-protic and polyprotic acids depending on the number of protons which are liberated on dissociation.
Acids are widely used in industries for production of fertilizers, detergents batteries and dyes.They are used in chemical industries for production of chemical compounds like salts which are produced by neutralization reactions.
Learn more about acids,here:
https://brainly.com/question/29796621
#SPJ6
Explain why ionic compounds have higher boiling points than covalent compounds.
Answer:
because the have stronger electrostatic force
Question 1
1 pts
How many mols of bromine are present in 35.7g of
Tin(IV) bromate?
Answer:
n = 0.0814 mol
Explanation:
Given mass, m = 35.7g
The molar mass of Tin(IV) bromate, M = 438.33 g/mol
We need to find the number of moles of bromine. We know that,
No. of moles = given mass/molar mass
So,
[tex]n=\dfrac{35.7}{438.33}\\\\n=0.0814\ mol[/tex]
So, there are 0.0814 moles of bromine in 35.7g of Tin(IV) bromate.
When sugar is added to a sugar solution, the sugar dissolves. Which term describes the original sugar solution?
Answer:
the answer is D .................
In a pure metal, the electrons can be thought of as [ Select ] throughout the metal. Using molecular orbital theory, there [ Select ] an energy gap between the filled molecular orbitals and empty molecular orbitals. The [ Select ] orbitals are typically higher in energy and are mostly [ Select ] .
Answer:
Explanation:
In a pure metal, the electrons can be thought of as [concentrated] around atoms throughout the metal. Using molecular orbital theory, there [is ] an energy gap between the filled molecular orbitals and empty molecular orbitals. The [antibonding] orbitals are typically higher in energy and are mostly (filled]
True or false: Boron contains 2s22p1 valence electrons, so only one p orbital is needed to form molecular orbitals.
Answer:
True
Explanation:
The valence orbitals of boron are 2s2 2p1. We have to recall that all the valence orbitals whether full or empty are involved in the formation of molecular orbitals.
The number of molecular orbitals formed is equal to the number of atomic orbitals that are combined.
Since there are two valence orbitals and there is only one p orbital among the valence orbitals, it is true that only one p orbital is needed to form molecular orbitals in boron.
Trình bày sự hình thành phân tử CCl4 (lai hoá sp3)
