what malware that spreads on its own, especially through a network?

The two hardware selection criteria that are most important for a PC system that will be used as a file and print server in a small business are RAID 1+0 array and 64-bit multi-core processor. Option B and option E are correct answers.

RAID (Redundant Array of Independent Disks) 1+0, also known as RAID 10, is a type of nested RAID level that combines the high performance of RAID 0 with the redundancy of RAID 1 to provide both fault tolerance and enhanced data storage capacity. RAID 1+0 is formed by taking two identical RAID 1 (mirrored pair) arrays and combining them into a RAID 0 array. The mirrored pairs provide redundancy, whereas the RAID 0 stripes provide the necessary speed.

A 64-bit processor is a type of computer processor architecture that can handle 64-bit binary numbers. It is an upgrade from a 32-bit processor that can only handle 32-bit binary numbers. A multi-core processor is a processor that has two or more independent processing units on the same chip, each with its own cache. Multiple processing cores enable more instructions to be processed at the same time, resulting in quicker performance.

Both RAID 1+0 arra and 64-bit multi-core processors are the most important criteria for a file and print server in a small business. Thus, option B and E are the correct answers.

You can learn more about hardware selection criteria at

https://brainly.com/question/5075885

#SPJ11

There are several strategies that Lakeisha could use to speed up her data processing, such as parallel processing, data compression, and data aggregation.

These strategies can be used to reduce the amount of data that needs to be processed, speed up the processing of each individual data point, and allow multiple data points to be processed simultaneously.

Additionally, she could use a more powerful computer or use cloud-based computing to speed up her program.Lakeisha is developing a program to process data from smart sensors installed in factories.

The thousands of sensors produce millions of data points each day. When she ran her program on her computer, it took 10 hours to complete.

Learn more about data processing at

https://brainly.com/question/30094947

#SPJ11

The term which best describes the KPI that Homer is revising at his company is RTO because it is a metric used to define the amount of time within which services must be restored after a failure.

RTO stands for Recovery Time Objective. In a disaster recovery strategy, RTO is a critical component for determining how long an enterprise can operate without critical systems before experiencing unacceptable losses.An RTO determines how long an organization's business processes and operations can survive before a service interruption or application outage occurs.

The RTO is based on the criticality of the business process, system availability requirements, and the company's overall business continuity policy. Thus, the Recovery Time Objective is the maximum tolerable length of time that a computer, system, network, or application can be down following a failure before the loss of organization or system functionality has unacceptable consequences.

MTBF, or Mean Time Between Failures, is a statistical measure of the average time a product or system will perform satisfactorily. This measure is widely used in the manufacturing and engineering industries to determine the reliability of a product or system.

MTRR, or Memory Type Range Registers, is a CPU feature that specifies how system memory can be accessed. RPO, or Recovery Point Objective, is a metric used to define the maximum amount of time that an organization's processes or data can be lost following a service interruption or disaster. An RPO determines the amount of data loss an organization can tolerate before experiencing unacceptable business impacts or consequences.

You can learn more about Recovery Time Objective at: brainly.com/question/28386707

#SPJ11

Answer:

Any information that has been processed by sent out from a computer or similar device is considered output. A simple example of output is anything you view on your computer monitor.

A photon of energy 113.6 eV ejects an electron from a hydrogen atom in its ground state, the kinetic energy of ejected electron is 100 eV.

Given data is

Energy of photon, E = 113.6 eV

Energy required for ejecting an electron from the atom is known as ionization energy of an atom.

The ionization energy of hydrogen is 13.6 eV. If the energy of the photon is equal to or greater than the ionization energy of an atom, the electron will get ejected from the atom. The remaining energy will be utilized by the electron in the form of kinetic energy.

Kinetic energy of electron is given by;

K.E = E - IE

Where, E = Energy of photon

IE = Ionization energy of hydrogen

Substituting the values;

K.E = 113.6 eV - 13.6 eV = 100 eV

Therefore, the kinetic energy of ejected electron is 100 eV.

Learn more about  photoelectric effect and hydrogen atom spectra:https://brainly.com/question/2256333

#SPJ11

It may consist of transcripts of conversations, written assignments, recordings of oral language evaluations, and other documentation of the student's language competence.

The process of gathering, compiling, and preserving written or digital records of information is referred to as documentation. It is a necessary tool for a variety of occupations, such as those in healthcare, education, and business. Documentation is essential in the context of education for monitoring student progress, recording learning goals, and assessing results. It enables educators to document observations, evaluations, and other information that can be utilised to decide on instructional approaches and student requirements. Due to the fact that it serves as a record of the actions and decisions made, documentation also aids in ensuring accountability and transparency. Communication, cooperation, and decision-making can all be improved with the use of effective documentation techniques, both inside and outside of the classroom.

Learn more about  documentation here:

https://brainly.com/question/11440049

#SPJ4

To create a data center, various hardware components are required.

The data center is the most important component of the cloud computing infrastructure.

The following are the main hardware components that are needed to set up a data center:

Server: It is a central computer that manages data storage, network traffic, and software applications. It is the most important component of a data center.

Storage device: The storage device is used to store data. It could be a hard drive, tape drive, or cloud-based storage. The data center's storage system must have redundancy to guarantee data integrity and high availability.

Routers and Switches: Routers and switches are used to connect servers to each other and to the Internet. A router is a device that directs data packets to their intended destination, while a switch is used to connect devices within the data center.

Firewall: A firewall is used to protect the data center from unauthorized access, virus, and malware attacks.

Cooling and Power Supply: Data centers require specialized power and cooling systems to ensure reliable operation. They must have backup power and cooling systems to keep the servers and equipment operational even during power outages.

Backup systems: Backups are critical for data centers because they provide a way to recover data in the event of a disaster or hardware failure. Backups should be taken frequently, and they should be stored in a secure, offsite location where they can be easily accessed in the event of a disaster or data loss.

Learn more about data center at

https://brainly.com/question/14517816

#SPj11

To find the highest rated apps with a user rating of at least 4.6, have at least 1000 reviews, and does not have a content rating of ‘Everyone’, you would need to have access to the app store or platform where the apps are listed.

From there, you would need to filter the apps based on their user rating and the number of reviews they have received. Then, you would need to further filter the apps based on their content rating to exclude those with a rating of ‘Everyone’.

To find the total number of apps for each of the 6 content rating categories, you would need to have access to the app store or platform where the apps are listed. From there, you would need to group the apps based on their content rating and count the number of apps in each group.

To find the top 3 highest rated apps in the category of ‘TOOLS’ that have more than 225,000 reviews, you would need to have access to the app store or platform where the apps are listed. From there, you would need to filter the apps based on their category and the number of reviews they have received. Then, you would need to rank the remaining apps based on their user rating and select the top 3. Finally, you would need to find positive reviews for each of the top 3 apps and include them in a visualization.

Learn more about apps here brainly.com/question/11070666

#SPJ4

The given statement "c does not perform array bounds checking, making it possible for you to assign a pointer the address of an element out of the boundaries of an array" is TRUE.

The array is the set of values of the same data type that can be stored sequentially in memory using a single name. You can consider it as a set of containers that hold a particular type of data with a unique name. For example, an array can store ten values of the int data type. However, it is a bit of a double-edged sword.

On one hand, the array can improve the efficiency of the program's operation, and on the other hand, it can also put the system in danger if not used correctly. One example of it is array bounds checking.

Most programming languages that support arrays perform bounds checking to ensure that the array is only accessed within the bounds of the memory allocated for it. However, in the case of C, it does not perform any such checks, and if you try to access an array's elements beyond its bounds, it will generate an error.

It is also possible to assign a pointer the address of an element out of the boundaries of an array in C. However, the program will not check whether the address is in the array boundaries or not. It can cause a variety of errors, including program crashes or security vulnerabilities.

Learn more about address: https://brainly.com/question/19726435

#SPJ11

Option d is correct, Fuser is the printer consumables which is most likely causing the issue.

The issue described, where printouts have double images imposed on them, is a common symptom of a faulty fuser in a laser printer.

The fuser is responsible for bonding toner to the paper, and if it is not functioning properly, it can cause double images or smudging on the printouts.

Given the lack of maintenance kit installation for over a year, it is highly likely that the fuser needs to be replaced or repaired.

To learn more on Fuser click:

https://brainly.com/question/14902244

#SPJ2

No, it is untrue that 2D arrays are declared in row-column order, where the first value represents the number of rows and the second value represents the number of columns.

In programming, a 2D array is a type of data structure that is used to hold and modify groups of values that are arranged in a grid or table-like style. Because it has two dimensions—rows and columns—it is known as a 2D array. The position of each element in the array within the grid, which is determined by a pair of indices—one for the row and one for the column—is used to identify it. Several programming activities, including image processing, matrix operations, and game development, frequently use 2D arrays. They are especially helpful for displaying information that can be arranged into a grid or table, such as the locations of game boards or the pixels in an image.

Learn more about 2D arrays here:

https://brainly.com/question/27171171

#SPJ4

The statement that best describes Amazon CloudFront is that it is a global content delivery service.

What is Amazon CloudFront?

Amazon CloudFront is a content delivery network (CDN) created by Amazon. It delivers data, videos, applications, and APIs to consumers at high speeds all around the world. The service speeds up the delivery of static and dynamic web content, including .html, .css, .js, and picture files. It routes content requests based on the location of the consumer, origin of the content, and the route taken by the query.I t uses a worldwide network of edge locations to cache content closer to consumers, lowering latency and increasing download speeds. Amazon CloudFront operates in 60 cities and 26 nations globally as of 2017, including the United States, Europe, Asia, and South America. This guarantees that the data is constantly up to date and that the files are available for download more quickly. Additionally, the service has DDoS defense, origin shielding, and certificate management functionalities.

Learn more about Amazon CloudFront

brainly.com/question/30401293

#SPJ11

The notation that Kevin should write to mark the relationship between an employee and payroll deductions where an employee can have no payroll deductions or he/she can have many deductions is "0..*."

A class diagram is a kind of diagram in UML that depicts the structure of a framework by indicating the classes that make up the system, their attributes, and the relationships between them. It portrays a method or an application in terms of the classes and interfaces that make it up and the collaborations between those elements that implement the behavior of the entire system. A relationship in UMLA relationship in Unified Modeling Language (UML) is a connection between two or more things.

These things can be entities, classes, components, actors, or any other model element. There are several types of relationships in UML, including inheritance, association, aggregation, and composition, among others.

Learn more about UML: https://brainly.com/question/15078406

#SPJ11

The term "brute force attack" refers to the process of making repeated attempts to crack an encryption or password.

A brute force assault involves trying all character combinations until the right one is found in an effort to crack a password or encryption key. Cybercriminals frequently employ this style of attack to obtain unauthorised access to secure systems or sensitive data. Brute force assaults, which can be carried out manually or automatically, can take a lot of time and resources, especially if the passwords or encryption keys are strong and contain a lot of potential combinations. Several security systems use techniques like restricting the number of login attempts, adding pauses between login attempts, or implementing multi-factor authentication to defend against brute force assaults. To stop brute force assaults, it's crucial to utilise encryption keys and strong passwords.

Learn more about "brute force attack" here:

https://brainly.com/question/28119068

#SPJ4

The two security measures that would BEST secure a wireless network, according to the given scenario, are:A. Change the encryption method to WPA.D. Enable and configure MAC filtering because WEP (Wired Equivalent Privacy) is the weakest encryption method of the three (WEP, WPA, WPA2) used for securing a wireless network. So, it is best to replace it with WPA (Wi-Fi Protected Access) or WPA2.

Changing the encryption method to WPA will help to prevent unauthorized connections from accessing the wireless network. The third option, enabling SSID broadcast, will not help in securing the wireless network as it will make the network visible to all devices within the range. So, this option is incorrect.

Now coming to option B, limiting the DHCP scope to three addresses total would mean that the router will only provide three IP addresses, making it difficult to add more devices to the network. This method will only create an inconvenience and will not be useful for securing the network. Therefore, this option is also incorrect.

Now coming to option D, enabling and configuring MAC filtering will prevent unauthorized devices from accessing the network by using the device's MAC address to filter out any device that does not have an authorized MAC address. This is one of the effective security measures to secure a wireless network. So, it is one of the right answers.

Finally, option E, changing the broadcast channel to a less commonly used channel, might help reduce the interference from neighboring networks, but it will not prevent unauthorized access to the network. So, this option is also incorrect.

You can learn more about WPA at: brainly.com/question/20616422

#SPJ11

The following are the true properties of multidimensional scaling (MDS) in the given question: An MDS projection can be rotated and/or reflected without changing how it is interpreted In the 2D projection created by MDS, the axes correspond to high-dimensional variance axes.

1. An MDS always reduces a high-dimensional space to a 2D projection. This statement is false as MDS can reduce high-dimensional space to 3D projection as well.

2. MDS removes outliers from the dataset, so none appear in the 2D projection. This statement is false.

3. Each of the points in the MDS 2D projection corresponds to a high-dimensional column from the original data frame.  This statement is false.

4. In the 2D projection created by MDS, the axes have no meaning. This statement is false. Multidimensional scaling (MDS) is a way to visualize similarities and differences between sets of data points. MDS reduces a high-dimensional dataset to a low-dimensional dataset for visualization purposes. The properties of MDS include that it can be rotated and/or reflected without changing how it is interpreted, and the axes correspond to high-dimensional variance axes in the 2D projection created by MDS.

Learn more about MDS visit:

https://brainly.com/question/29809025

#SPJ11

Some trojan horses contain a virus or a worm, which can replicate and spread. Virus experts call this a blended threat because it combines more than one type of malicious code.

A blended threat is a combination of computer viruses, worms, and Trojan horses. Blended threats usually exploit security vulnerabilities or software bugs to spread rapidly through networks. Blended threats can be engineered to create a distributed denial of service (DDoS) attack or to provide remote control over your system to attackers. In most cases, blended threats require no human interaction to spread, so they may infect computer systems or networks before users are aware of their presence. Because of their stealthy nature, blended threats can often evade the most sophisticated intrusion detection systems (IDS) and intrusion prevention systems (IPS).

As a result, organizations must make sure that their systems are up to date with the latest patches and upgrades to avoid the risk of blended threats.

You can learn more about  trojan horses at

https://brainly.com/question/354438

#SPJ11

Bar code scanners, RFID tags, and touch screens are technologies commonly used by businesses in the data input step of the information processing cycle.

These technologies allow businesses to quickly and accurately collect data from various sources and input it into their information systems.

Bar code scanners and RFID tags are used to input data automatically from products, inventory, or assets, reducing the time and errors associated with manual data entry. Touch screens, on the other hand, are used as an interface for manual data input by allowing users to interact directly with the system through a touch-based interface.

By using these technologies in the data input step, businesses can improve the accuracy, speed, and efficiency of their information processing, leading to more informed decision-making and better overall performance.

To know more about Bar code click here:

brainly.com/question/30617824

#SPJ4

A network monitoring server might be helpful for Venus to achieve her goal of becoming more proactive in her responses to network occurrences.

Proactive monitoring in the context of monitoring products typically entails spotting potential problems with IT infrastructure and apps before users discover them and complain and taking steps to stop the problem from being visible to users and having an adverse impact on the business.

We define and categorise four forms of monitoring—surveillance, implementation, efficacy, and ecological effects—each of which is intended to address a distinct set of objectives.

To know more about network visit:-

https://brainly.com/question/14276789

#SPJ1

Nodes generally have a single entry in their default router lists, and all packets destined to nodes that are off-link are sent to their default gateway. The statement is true

Nodes generally have a single entry in their default router lists, and all packets destined to nodes that are off-link are sent to their default gateway.

Whenever a device wishes to transmit data packets to a destination, it must first identify whether the destination is within or outside the network. If the destination is outside the network, the device will use the default gateway to send data packets to the destination.

Nodes generally have a single entry in their default router lists, and all packets destined to nodes that are off-link are sent to their default gateway. Thus, the given statement is true.

To learn more about the default gateway check the below link:

brainly.com/question/27975111

#SPJ11

To fix the issue where the default permission settings do not grant Local Activation permission for COM server application with Clsid, you can follow these steps: Click the Start and search dcomcnfg, click on DCOM Config, Properties, Security tab, Launch and Activation Permissions, Local Service and Restart your computer.

These steps should grant Local Activation permission for the specified COM server application with Clsid, and should resolve the issue with default permission settings.

Learn more about  default permission settings :https://brainly.com/question/30082022

#SPJ11

When an organization seeks transference of information security risk, it is likely to purchase (F) cyber liability insurance.

Cyber liability insurance helps organizations protect against financial losses from cybersecurity incidents such as data breaches, network damage, and cyber extortion. The insurance policy covers the cost of legal fees, customer notification, credit monitoring, data recovery, and any other costs associated with the breach. By purchasing cyber liability insurance, the organization transfers the financial risk of a cybersecurity incident to the insurance company, reducing its own financial liability.

You can learn more about Cyber liability insurance at

https://brainly.com/question/28524123

#SPJ11

By utilising the idea of normalisation, a "base" (or database) in a database enables you to store only one version of the data.

Database design uses the normalisation process to reduce redundancy and enhance data integrity. It entails decomposing a database into smaller, more manageable tables and creating connections among them. Each item of data is therefore kept in a single location, and all references to that data are made of that location alone. This makes the database more effective and simpler to administer by reducing data redundancy and enhancing data consistency. There are different levels of normalisation, and each has its own specifications on how to arrange data. The end result of normalising is to produce a database that is dependable and simple to use, resulting in more consistent and efficient data administration.

Learn more about normalisation here:

https://brainly.com/question/30505015

#SPJ4

The percent error in the first reading is 3.54%.

Here's the answer to your question:

We have two values; the first one is the value that we measured with a possible mistake, and the second one is the true value that we should have gotten if there were no mistakes.

The error is the difference between the two values. Hence, the percent error in a measurement is the ratio of the error in the measurement to the measurement itself, expressed as a percent.

In this problem, we have 2450 MB as the memory remaining that is measured with possible errors. The true value should have been 2540 MB.

The difference between the two values is: [tex]2540 - 2450 = 90 MB[/tex]

The percent error in the first reading is:

[tex]PE = \frac{Error} {True Value} * 100[/tex]

[tex]= \frac{90}{2540} * 100PE\\=3.54%[/tex]

Thus, the percent error in the first reading is 3.54%.

Learn more about percent error here:

brainly.com/question/28771966

#SPJ11

Answer:it would be 3.5

Explanation:because you take the the error over the correct multiply 100 and that’s your number

To identify all of the one-to-many relationships in the database as well as the field used in both tables to make the connection using the following pattern found in SQL when connecting two tables using the WHERE or INNER JOIN clause in Access, open the Relationships window. Given that an example of one of the relationships is given as a guide, the other relationships can be recognized with the help of the ER Diagram or Table Relationships.

The ER Diagram is a logical or conceptual representation of an enterprise's data. It is used to depict the various connections between tables or entities in the system. For each pair of tables that are linked in a one-to-many relationship, the table on the 'one' side should be listed first, followed by the table on the 'many' side.

Access allows the creation of relationships between tables or entities. The Relationships window allows you to see how the various tables in a database are connected. Relationships are formed based on one or more fields that link two tables. These links are formed by selecting the relevant field in each table that is shared between the two tables in the Relationships window. Here is the pattern:

Table1 INNER JOIN Table2 ON Table1.

Field1 = Table2.

Field1

For Example, let's say we have a table of Customers and a table of Orders, where the CustomerID is the field that links the two tables. Here are the relationships:

Here's the SQL:

Learn more about SQL: https://brainly.com/question/29216782

#SPJ11

To get permission to install software on Ubuntu Linux, you would need to use the sudo command. Sudo stands for "superuser do" and allows you to execute commands as the superuser or administrator.

Here are the steps to use the sudo command:Open a terminal window by pressing Ctrl+Alt+T on your keyboard.Type in the command you want to run, for example, "sudo apt-get install [package name]".Press Enter on your keyboard.You will be prompted to enter your password. Type in your user password and press Enter.If the password is correct, the command will be executed with administrative privileges, allowing you to install the software.Note: Only use the sudo command for commands that require administrative privileges. Using the sudo command can be dangerous, so it's important to be careful and only use it when necessary.

To learn more about Linux click the link below:

brainly.com/question/13267082

#SPJ4

Opening NAT type for multiple PCs requires you to create a static IP address and forwarding ports on your router. This will allow the router to allocate a specific IP address to each device that will always be the same.

Opening NAT type for multiple PC's- To open NAT type for multiple PCs, follow the steps below:

Step 1: Get the MAC addresses of all PCs. Ensure that you have the MAC addresses of all the devices that you want to connect to the network. The MAC address is the unique address that identifies each device on the network. To find the MAC address on a PC, open the command prompt and type "ipconfig/all"

Step 2: Reserve an IP address for each device. Once you have the MAC addresses, you can reserve an IP address for each device. This ensures that each device will always have the same IP address. You can do this by logging into your router and creating a static IP address.

Step 3: Port forwarding. Once you have created static IP addresses, you will need to forward the ports for each device. This involves opening the required ports for each device on your router. This can be done by accessing your router settings and forwarding the required ports. To do this, you will need to know which ports to forward for each device. You can find this information online, or by contacting the manufacturer of your devices.

To learn more about "open NAT", visit:  https://brainly.com/question/31143418

#SPJ11

Unified communications (UC) is an umbrella term for integrated, multi-media communications controlled by an individual user for both business and social purposes. UC integrates all of the following except: b. data.

Unified Communications (UC) is an all-in-one communications system that combines the integration of real-time communication tools like voice, instant messaging (IM), video conferencing, desktop sharing, data sharing, and more, with non-real-time communication tools like email, voicemail, SMS, and fax.The primary objective of Unified Communications (UC) is to unify all communication channels and tools, making communication more straightforward, faster, and more efficient. UC technology also integrates these different channels into a single interface or platform, allowing users to access and manage them all from one place.  Therefore, UC integrates all of the following except data.

Learn more about Unified communications: https://brainly.com/question/30177142

#SPJ11

The number of clusters chosen fits this dataset well when exploring K-means. The correct answer is b.

Learn more about  K-means here: https://brainly.com/question/17241662

#SPJ11

A hierarchical report is a format for displaying information in a tree structure. It's often used to show how data relates to each other. It works by breaking down information into smaller components and displaying it in a logical order.

Detail line of a hierarchical report would include the cname of each customer, the make of each rental, the pickup and return of the rental, and the date-out. In a hierarchical report, this information would be presented in a structured format.

Hierarchical reports make use of lines to link information together as it flows through the report. They can help readers to easily identify the connections between data points.  Therefore, the correct option is, cname of each customer, make of each rental, pickup and return of the rental, and date-out are part of a detail line in a hierarchical report.

Learn more about hierarchical report at

https://brainly.com/question/30008450

#SPJ11