Answer:
Explanatio
NCO2= 0, 248 /44= 0 ,005636
VCO2= 0,005636* 22,4= 0 ,126254545
2. A photon of wavelength for 4 x10 -7 m strikes on the metal surface the work
function of the metal being 2.13 eV.Calculate (i)the energy of the photon in
eV(ii) the kinetic energy of the emission(iii) velocity of the photoelectron
[1ev=1.602x10-19 J]
Answer:
See explanation
Explanation:
Energy of the photon;
E = hc/λ
h= Planks constant
c= speed of light
λ = wavelength
E= 6.6 × 10^-34 × 3 × 10^8/4 x10 -7
E = 4.95 × 10^-19 J
If 1ev=1.602x10-19 J
x = 4.95 × 10^-19 J
x= 3.1 ev
From Einstein's photoelectric equation;
KE = E - Wo
Where;
KE = kinetic energy of ejected photoelectron
E= energy of the photon
Wo= work function of the metal
KE = 3.1 eV - 2.13 eV
KE= 0.97 eV
KE = 0.97 eV × 1.602x10-19 J
KE = 1.55 × 10^-19 J
KE = 1/2 mv^2
1.55 × 10^-19= 1/2 × 9.1 × 10^-31 × v^2
v= √2 × 1.55 × 10^-19/9.1 × 10^-31
v= 5.8 × 10^5 m/s
A mixture of liquids having almost the same boiling point cannot be separated by simple distillation?Why?
Answer:
Distillation:
Distillation is the process in which two or more liquids are separated on the basis of their boiling points.
Process:
Liquid mixture is heated. The liquid which is of low boiling point evaporates first and is condensed separately. This is followed by the liquid having more boiling point than the previous one and so on.
Reason:
A mixture of liquids having almost same boiling points cannot be separated. This is because both the liquids will evaporate at almost the same time when heated and thus, we will obtain the same liquid mixture again. No separation will occur.
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807Peace!Can you tell me name of chemicals in sea Please?
this is my attachment answer hope it's helpful to you
Write down the constituent elements present in the following compounds.
a. Sodium Sulphate
b. Baking Soda
c. Limestone
d. Bleaching powder
e. Ammonia
f. Caustic Soda
g. Glucose
h. Ammonium Carbonate
I. Acetic acid
j. sulphuric acid
Answer:
in sodium sulphate there is sodium an sulphur
What is occurring during boiling?
A. Solvent particles increase in kinetic energy until they knock solute particles out of the solution and into the air.
B. Solute particles increase in kinetic energy until they knock solvent particles out of the solution and into the air.
C. Vapor pressure is greater than atmospheric pressure and water molecules escape from the solution into the air.
D. Atmospheric pressure is greater than vapor pressure, and water molecules escape from the solution into the air.
Reset Selection
Answer:
D: Atmospheric pressure is greater than vapor pressure,and water molecules escape from the solution into the air.
Atmospheric pressure is greater than vapor pressure, and water molecules escape from the solution into the air, which occurs during boiling. The correct option is D.
What is boiling?Boiling is a process when more heat is given to any liquid, it starts to boil. When the temperature is increased, boiling happens, but only in liquid. The molecules of liquid start to turn into vapor and start to escape into the atmosphere.
It is also called the vaporization of the liquid. The boiling points of different liquids are different, and they start to boil at their own temperature.
Thus, the correct option is D. Water molecules escape from the solution into the air when atmospheric pressure exceeds vapor pressure.
Learn more about boiling, here:
https://brainly.com/question/1416592
#SPJ5
what does porous mean
Answer:
porous = allowing liquid or air to pass through slowly
I hope it's helpful
Answer:
It is a rock or or other materials, having minutes interstices through which liquid or air may pass.
What is an atomic mass unit? Write down the electric charge of proton neutrons and electric.
Answer:
protons has a positive charge.
Neutrons does not have a charge (neutron = neutral)
Electrons has a negative charge
Which of these solutions is acidic?
Answer:
Option a is a solution acidic ([OH⁻] = 7.0x10⁻⁹ M).
Explanation:
To know if a solution is acidic we need to calculate the pH and it must be lower than 7. A value of pH equal to 7 is a neutral solution and a solution with a pH value higher than 7 is a basic solution.
a. For the [OH⁻] = 7.0x10⁻⁹ M we have:
[tex] pOH = -log[OH^{-}] = -log(7.0 \cdot 10^{-9}) = 8.15 [/tex]
Now, the pH is:
[tex] pH + pOH = 14 [/tex]
[tex] pH = 14 - pOH = 14 - 8.15 = 5.85 [/tex]
This solution is acidic (pH < 7)
b. [H₃O⁺] = 8.5x10⁻⁸ M
[tex] pH = -log(8.5 \cdot 10^{-8}) = 7.07 [/tex]
This is not an acidic solution. Is a neutral one (pH around to 7).
c. [OH⁻] = 2.5x10⁻⁶ M
[tex] pOH = -log[OH^{-}] = -log(2.5 \cdot 10^{-6}) = 5.60 [/tex]
Then, the pH is:
[tex]pH = 14 - pOH = 14 - 5.60 = 8.40[/tex]
Hence, this is not an acidic solution. It is basic (pH > 7).
Therefore, option a is a solution acidic ([OH⁻] = 7.0x10⁻⁹ M).
I hope it helps you!
Một hỗn hợp X gồm CH3OH; C2H5OH; phenol có khối lượng 28,9 gam phản ứng vừa hết với 100ml dung dịch NaOH 2M. Phần trăm theo khối lượng phenol là ? Biết C = 12; O = 16; H = 1; Na = 23. *
Answer:
nNaOH = 0,2 mol
Trong hỗn hợp các chất đề bài cho chỉ có phenol tác dụng với NaOH
C6H5OH + NaOH → C6H5ONa + H2O
0,2 ← 0,2 (mol)
⟹ mphenol = 0,2.94 = 18,8 gam
⟹
%mC6H5OH=18,8/28,9 x100%= 65,05%
Explanation:
Which statement describes the law of conservation of energy?
All systems will exchange matter and energy with their surroundings.
All systems can exchange energy, but not matter, with their surroundings.
Energy cannot be created nor destroyed, but it changes from one form to another.
Energy is destroyed in most chemical reactions when new products are formed.
Answer:
All systems will exchange matter and energy with their surroundings.
Explanation:
Answer:c
Explanation:
Are you ready kids?
Aye, aye Captain.
I can't hear you!
AYE, AYE CAPTAIN!
Oooooooooh.
Who lives in a pineapple under the sea?
Spongebob squarepants!
Absorbent and yellow and porous is he?
Spongebob squarepants!
If nautical nonsense be something you wish!
Spongebob squarepants!
Then drop on the deck and flop like a fish!
Spongebob squarepants!
Ready?
Spongebob squarepants.
Spongebob squarepants.
Spongebob squarepants.
Spongebob squarepants.
Spongebob-squarepants.
Which atom's ionization energy is greater than that of phosphorus (P)?
A. Ba
B. K
C. As
D. CI
Answer:
Chlorine
Explanation:
the ionization increases as you get closer to the top right. since chlorine (Cl) is the only one of the answer choices that is closer to the top right corner compared to phosphorous (P), that is the answer.
Answer:
cl
Explanation:
because ionization energy decrease from left to right
In ionic bonding Question 41 options: the electrons are shared between the atoms. the process of forming an ionic bond is highly endothermic overall. the bonding that occurs is usually between two nonmetal atoms. a noble gas configuration is formed for each element or ion. At least two of the above statements are correct.
Answer: In ionic bonding (a noble gas configuration is formed for each element or ion).
Explanation:
IONIC bonding, which is also called electrovalent bonding involves the complete transfer of electrons from one atom to another in order to attain a noble gas electron configuration.
The noble gases or group 0 elements have a completely filled outermost shell of eight electrons. This makes them generally very stable, that is, unreactive. There is a natural drive for other atoms to attain the electron configuration of group 0 (inert gases) elements. This usually results in atoms entering into chemical combinations by losing, gaining or sharing electrons.
Ionia compound such as sodium chloride
--> have high melting points because alot of heat energy is required to break the attractive forces between the ions;
--> are hard and brittle;
--> are soluble in water;
--> conduct electricity when in solution or molten form because the ions are able to move about, that is, they are electrolytes
The addition of solute particles into a solution causes:
A. the solvent particles to be attracted to the solute particles and to have less kinetic energy.
B. the solute particles to bump the solvent particles out of the solution, making it easier to boil.
C. the solute particles to form seed crystals and make the solution freeze more easily.
D. the solvent particles to be spread further out and have more to move, increasing their kinetic energy.
Answer:
D. the solvent particles to be spread further out and have more to move, increasing their kinetic energy.
Explanation:
The addition of solute particles results in an increased boiling point. As the solutes increases so does the energy inside as the solutes add and occupies more space near the surface of the liquid.2. 10.00 grams of a sample of hydrated PtCl4 are heated and lose 3.00 g of water. How many moles of water are combined with each mole of PtCl4?
Answer:
8 mol
Explanation:
Step 1: Calculate the mass of PtCl₄ in the sample
10.00 grams of a sample of hydrated PtCl₄ are heated and lose 3.00 g of water. The mass of PtCl₄ is:
mPtCl₄ = 10.00 g - 3.00 g = 7.00 g
Step 2: Calculate the moles corresponding to 7.00 g of PtCl₄ and 3.00 g of H₂O
The molar mass of PtCl₄ is 336.9 g/mol.
7.00 g × 1 mol/336.9 g = 0.0208 mol
The molar mass of H₂O is 18.02 g/mol.
3.00 g × 1 mol/18.02 g = 0.166 mol
The molar ratio of H₂O to PtCl₄ is:
0.166 mol H₂O/0.0208 mol PtCl₄ ≈ 8 mol H₂O/ 1 mol PtCl₄
What is te SI unit of time?
Answer:
second (S) is the SI unit of time.
Answer:
second
Explanation:
the gap between any two intervals is called time
time can be measured in hour,minute,second
but second is the SI unit of time
Which of the following is an example of combustion?
O A. potassium chlorate -> potassium chloride + oxygen
B. aluminum + cobalt chloride -> aluminum chloride + cobalt
O c. hexane + oxygen carbon dioxide + water
OD. sodium cyanide + hydrochloric acid -> sodium sulfate + hydrogen cyanide
Balance the following equations
ANSWER
2Ba + 2HBr → 2BaBr + H2
2BiCl3 + 3H2S → Bi2S3 + 6HCl
Br2 + 2KI → I2 + 2KBr
4Fe + 3O2 → 2Fe2O3
I HOPE THIS WILL HELP YOU IF NOT THEN SORRY HAVE A GREAT DAY:)Answer:
[tex]3Mg _{(s)} + N _{2(g)} → Mg_{3} N _{2(s)}[/tex]
[tex]Ba _{(s)} + 2HBr_{(g)} → BaBr _{2(s)} + H _{2(g)}[/tex]
[tex]2BiCl_{3(s)} + 3H_{2} S _{(g)} → Bi _{2} S _{ 3(g)} + 6HCl _{(g)} \\ [/tex]
[tex]Br_{2(g)} + 2KI _{(g)} → I _{2(g)} +2 KBr _{(g)}[/tex]
[tex]4Fe_{(s)}+ 3O_{2(g)} → 2Fe_{2} O _{3(s)} [/tex]
if 1.35 g of aluminum occupies 0.500 cm^3. what is the density of aluminum
Answer:
2.7
Explanation:
Density= mass/volume
= 1.35/0.500
= 2.7
3. How can you decrease the pressure of a gas in a container without changing the volume of the gas?
add more gas particles to the container
move the container to a lower altitude
o o
reduce the temperature of the gas
O
change the shape of the container
Answer:
reduce the temperature of the gas
Explanation:
when you reduce the temperature of the gas the pressure will decrease
6c.Calculate the maximum volume, in dm3, of chlorine gas at Stp that can be obtained from 23.4 tonnes of molten sodium chloride. 1 tonne= 10^6 Mr of NaCl=58.5 molar volume of chlorine at stp= 24dm3 Give your answer in standard format.
Answer:
4.48×10⁶ dm³
Explanation:
We'll begin by converting 23.4 tonnes to grams (g). This can be obtained as follow:
1 tonne = 10⁶ g
Therefore,
23.4 tonnes = 23.4 × 10⁶
23.4 tonnes = 2.34×10⁷ g
Thus, 23.4 tonnes is equivalent to 2.34×10⁷ g
Next, we shall determine the number of mole in 2.34×10⁷ g of NaCl. This can be obtained as follow:
Mass NaCl = 2.34×10⁷ g
Molar mass of NaCl = 58.5 g/mol
Mole of NaCl =?
Mole = mass / molar mass
Mole of NaCl = 2.34×10⁷ / 58.5
Mole of NaCl = 4×10⁵ moles
Next, we shall determine the number of mole of chlorine, Cl₂ produced from the reaction. This can be obtained as follow:
2NaCl —> 2Na + Cl₂
From the balanced equation above,
2 moles of NaCl reacted to produce 1 mole of Cl₂.
Therefore, 4×10⁵ moles of NaCl will react to produce = (4×10⁵ × 1)/2 = 2×10⁵ moles of Cl₂.
Thus, 2×10⁵ moles of Cl₂ were obtained from the reaction.
Finally, we shall determine the volume of Cl₂ produced. This can be obtained as follow:
1 mole of Cl₂ at stp = 22.4 dm³
Therefore,
2×10⁵ moles of Cl₂ at stp = 2×10⁵ 22.4
2×10⁵ moles of Cl₂ at stp = 4.48×10⁶ dm³
Thus, the volume of chlorine obtained from the reaction is 4.48×10⁶ dm³
Is the following change an oxidation or reduction?
manganese (IV) oxide to manganese (III) oxide.
Answer:
12113
Explanation:
step by step:no
Unknown # 21
Flame Test Color: Lilac
Addition of HCl(aq)= NR (No Reaction)
Addition of HCl(aq) and BaCl2(aq)= White precipitate
Addition of HNO3(aq) and AgNO3(aq)= NR (No Reaction)
What is the unknown ionic compund molecular formula?
Which of the following olosaic structures represents a poskwe 9 protons, 10 mentions and 10 elections 12 protons, 1814 neutrons and 12 elections 12 protons, 12 neutrons and 10 elections
Answer:
migraine
Explanation:
d
what is cytoplasm ? what does it contain?
Answer:
Cytoplasm is a thick solution that fills each cell and is enclosed by the cell membrane. It is mainly composed of water, salts, and proteins. All of the organelles in eukaryotic cells, such as the nucleus, endoplasmic reticulum, and mitochondria, are located in the cytoplasm.
Answer:
Explanation:
Cytoplasm is a thick solution that fills each cell and is enclosed by the cell membrane. It is mainly composed of water, salts, and proteins. All of the organelles in eukaryotic cells, such as the nucleus, endoplasmic reticulum, and mitochondria, are located in the cytoplasm. ...
what is electronic configuration?
Answer:
In atomic physics and quantum chemistry, the electron configuration is the distribution of electrons of an atom or molecule in atomic or molecular orbitals.
Can someone help me please
Which of the following would not be considered matter?
clouds
trees
rain
air
light
Answer:
light
Explanation:
Have a nice day
Answer:
light
Explanation:
What eventually happens to all radioactive isotopes?
A. They become stable after one half-life.
B. They emit particles, electromagnetic radiation, or both.
C. They absorb energy when they decay.
D. They are pulled apart by strong nuclear forces.
Answer:
B. they emit particles electromagnetic radiation or both
Radioactive isotopes emit particles, electromagnetic radiation, or both. The correct option is B.
Radioactive decay occurs in all radioactive isotopes and involves the release of particles, electromagnetic radiation, or both.
Radioactive decay occurs owing to the instability of the isotope's atomic nucleus.
The nucleus releases surplus energy in the form of particles (such as alpha particles or beta particles) or electromagnetic radiation (such as gamma rays) in order to achieve a more stable state.
This random process continues until the radioactive isotope is converted into a stable isotope.
Thus, correct option is B.
For more details regarding radioactive isotope, visit:
https://brainly.com/question/28039996
#SPJ6
****URGENT****
I need help!!!
the answers are there, i need someone to explain please!
Explanation:
your answer was correct
cual es la importancia de los solidos en la vida ?
Answer:
La comida es un sólido y no podemos vivir sin comida. Algunos sólidos son buenos conductores de calor y electricidad; otros son aislantes. Los sólidos se utilizan todos los días en la vida.
