Answer:D
Explanation:
It’s the right answer
The concept ideal gas equation is used here to determine the volume of the gas. The volume of 0.24 mol oxygen gas at 345 K and a pressure of 0.75 atm is 9.1 L . The correct option is B.
What is ideal gas equation?The combination of Boyle's law, Charles's law and Avogadro's law leads to an equation which gives the combined effect of temperature and pressure on the volume of a gas. This equation is called the ideal gas equation.
The ideal gas law is also called the general gas equation.
The ideal gas equation is given as:
PV = nRT
n = Number of moles
P = Pressure
V = Volume
R = Gas constant
T = Temperature
Volume = nRT / P
V = 0.24 × 0.0821 × 345 / 0.75
V = 9.06 L ≈ 9.1 L
Thus the correct option is B.
To know more about ideal gas equation, visit;
https://brainly.com/question/12242461
#SPJ7
if five elements have atomic numbers 2,3,6,9 which two numbers are the most reactive??
Explanation:
[tex]element \: with \: 2 \: atomic \: number \\ \\ is \: stable \: because \: it \: has \: already \: \\ \\ completed \: its \: orbit \: \\ \\ but \: atomic \: number \: with \: 3 \: and \: 9 \\ \\ will \: have \: to \: become \: stable \: \\ \\ after \: giving \: one \: electron \\ \\ so \: \: element \: with \: 3 \: and \: 9 \: atomic \: number \\ \\ is \: most \: reactive[/tex]
Use mathematics to prove that the 5.50 grams of salicylic acid (C7H6O3) used in this experiment is equal to 0.04 mol.
Answer:
Please find the answer to the question below
Explanation:
In chemistry, the following mathematical formula is used to calculate the number of moles contained by a substance:
mole = mass of substance (g)/molar mass of substance (g/mol)
Molar mass of salicylic acid (C7H6O3) = 12(7) + 1(6) + 16(3)
= 84 + 6 + 48
= 138g/mol
Mass = 5.50grams
mole = 5.5/138
mole = 0.039
Approximately, the number of moles of 5.5grams of salicylic acid is 0.04moles. This is in accordance with the mole value (0.04) given in this question.
Which defines the word planet?
A. A large body that revolves around the Moon.
B. A large body suitable for life.
C. A large body that contains water and land.
D. A large body that revolves around the Sun.
Answer:
I think it's D cause one of the requirements for a planet is that it has to revolve around a star
Sodium-22 has a 2.605-year half-life. If you begin with 1.570 grams of Na-22, how many grams are left after 1.00 year?
Type the correct answer in the box. Express your answer to the correct number of significant figures.
Answer:
1.20 grams
Explanation:
Correct on edmentum/plato
Answer: 1.20 grams
Explanation:
What is the delta H when 72.0 grams H2O condenses at 100.00C?
Here are some constants that you MAY need.
specific heats heat of fusion heat of vaporization
H2O(s) = 2.1 J/g0C 6.01 kJ/mole 40.7 kJ/mole
H2O(L) = 4.18 J/g0C
H2O(g) = 1.7 J/g0C
2930 kJ
163 kJ
-163 kJ
-2930 kJ
Answer: The value of [tex]\Delta H[/tex] is -163 kJZ
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
We are given:
Given mass of water = 72.0 g
Molar mass of water = 18 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of water}=\frac{72.0g}{18g/mol}\\\\\text{Moles of water}=4mol[/tex]
Calculating the heat released for the condensation process:
[tex]\Delta H=n\times \Delta H_{(vap)}[/tex] ......(2)
where,
[tex]\Delta H[/tex] = amount of heat released
n = number of moles of water = 4 moles
[tex]\Delta H_{(vap)}[/tex] = specific heat of vaporization = -40.7 kJ/mol
Negative sign represents the amount of heat released.
Putting values in equation 2:
[tex]\Delta H=4mol\times (-40.7kJ/mol)=-163kJ[/tex]
Hence, the value of [tex]\Delta H[/tex] is -163 kJ
Given the structural formula: This compound is classified as an
Answer:
A.) aldehyde is the answer
From the given structural formula, the compound is ethanamide and thus, belongs to the group of amides. Thus, the correct option is B.
Amide is a functional group of organic compounds having an acyl group (R-C=O) linked to amine group (-NR¹R² where R¹ and R² are hydrogen atoms or alkyl groups). The amide functional group is given as -CON= (not double bond with N, but two distinct single bonds).
Amides can be classified into the following types depending on the moiety attached to nitrogen other than the carbonyl carbon:
1. Primary amides - amide in which the nitrogen atoms is attached to two hydrogen atoms
2. Secondary amides - in which the nitrogen atom is attached to one hydrogen and one alkyl group.
3. Tertiary amides - in which the nitrogen atom is attached to two alkyl groups.
Learn more about amides in:
https://brainly.com/question/29595493
#SPJ2
How many moles of sodium are in its 85 g?
Answer:
22.98977
Explanation:
don't worry about that
Explanation:
85 g Na × (1 mol Na/22.9898 g Na)
= 3.7 mol Na
Explain why solids and liquids are difficult to compress
whereas gases can easily be compressed.
Answer:
Because they take up a certain amount of volume because there is no space in-between the particles, a gases can be compressed because there is alot of space in-between each particle
Explanation:
WHAT IS EXOTHERMIC EXPLAIN
please ।
।।।
Answer:
Exothermic reactions are reactions or processes that release energy, usually in the form of heat or light. In an exothermic reaction, energy is released because the total energy of the products is less than the total energy of the reactants.Explanation:
I hope this helps u have a nice day ☘Answer:
An EXOTHERMIC reaction is when energy is released.
A + 2 B + 4 C → products is known to be second order in A, first order in B and independent of the concentration of C. What is the value of the rate constant for this reaction if its rate is 0.783 M · s−1 when [A] = 5.00 M, [B] = 7.00 M, and [C] = 3.00 M? −2 −1 Answerinunitsof M ·s .
Answer:
4.47 × 10⁻³ M⁻² s⁻¹
Explanation:
Let's consider the following generic equation.
A + 2 B + 4 C → products
This reaction is known to be second order in A, first order in B and independent of the concentration of C (zero order in C). The rate law is:
rate = k × [A]² × [B] × [C]⁰
rate = k × [A]² × [B]
where k is the rate constant
When the rate is 0.783 M/s, [A] = 5.00 M, [B] = 7.00 M, and [C] = 3.00 M, the rate constant is:
k = rate / [A]² × [B]
k = 0.783 M/s / (5.00)² × (7.00) = 4.47 × 10⁻³ M⁻² s⁻¹
Please help, only a couple of days left!!!
Answer:
the heat from the universe during the big bang
a.k.a.
ITS A
Explanation:
the universe is still expanding, so what is gonna be used to create that new matter that's expanding the universe? energy and heat from the beginning of the universe! the universe started off as this point that was probably smaller than a quantum foam and infinite heat and started expanding from there
How much heat is required to raise the temperature of 20.0g of ice from-12°C to 0°C?
Answer:
https://socratic.org/questions/how-much-heat-is-required-to-convert-5-88-g-of-ice-at-12-0-c-to-water-at-25-0-c-
Explanation:
Tenisha solved the equation below by graphing a system of equations. help!!!!!
Answer:
(1.0, 1.4)
Explanation:
Graph the two equations [tex]\log_3 5x[/tex] and [tex]\log_5 (2x+8)[/tex]. The point of intersection is the solution to the system of equations.
Graph on Desmos:
[tex]\log_3 5x\implies \text{Red},\\\log_5 (2x+8)\implies \text{Blue}[/tex]
A. 2 pts: In terms of conservation of mass, what were the results of each experiment (which one conserved mass and which one did not)?
B. 4 pts: PROVIDE a SPECIFIC explanation for "why" the results in both videos were different.
. 2 pts: Discuss differences in the experimental steps between the two videos (for example what was done in video one that was not done in
video two, why would this make a difference in conserving mass?)
• 2 pts: Look at both chemical equations (below for convenience), what difference in the type of products would have contributed to the
differences in why one conserved mass and one did not?
REACTION 1: Pb(NO3)2 (aq) + 2K1 (aq) --> 2KNO3 (aq) +Pölz (s)
• REACTION 2: NaHCO3(s) + CH3COOH(aq) → CO2(g) + H2Om + CH3COONa(aq)
Answer:
dftdffdgxrdfdrdxxxxdddddddddddddeeertdffddy
What does a vacuole mean
Answer:
a space or vesicle within the cytoplasm of a cell, enclosed by a membrane and typically containing fluid.
or
a small cavity or space in tissue, especially in nervous tissue as the result of disease.
What happens when an unstable nucleus undergoes radioactive decay?
A. Electrons change energy levels to balance the nucleus.
B. Energy is absorbed by the nucleus to make it more stable.
O C. Particles or electromagnetic radiation are emitted.
D. The nucleus increases in mass through radioactive decay.
Which of the following best describes an electron transition?
A. An electron gains or loses energy and moves between continuous
energy levels.
B. An electron gains or loses charge and changes into a proton or a
neutron.
C. An electron gains or loses energy and moves between quantized
energy levels.
D. An atom gains or loses an electron and becomes an ion.
Answer:
A. An electron gains or loses energy and moves between continuous
energy levels.
Which of the following statements is correct about electrical insulators?
A. They do not contain any atoms.
B. Their protons are not allowed to move about freely.
C. The electrons are not able to move about freely.
D. They are good at conducting heat only.
Answer:
the answer is C in my opinion.. hope this might be helpful
Which sequence of steps describes the life cycle of a lake?
A. Runoff fills a depression - sediments build up - water becomes
increasingly shallow
B. Runoff fills a depression - sediments are eroded - water becomes deeper
C. Runoff fills a depression - sediments build up
- water rises continuously
D. Runoff fills a depression - sediments are eroded - water spreads over a wider area
Answer:
The actual sequence of steps which describe the life cycle of a lake is given below:
C. Runoff fills a depression - sediments build up
- water rises continuously
Explanation:
This is because, the water which builds up as a result of the runoff water accumulating on the depression helps towards building up. When it must have accumulated greatly, it ends up forming a lake.
Find the surface area of a square pyramid with side length 5 cm and slant height 4 cm.
Answer:
h = height
s = slant height
a = side length
P = perimeter of base
e = lateral edge length
r = a/2
V = volume
L = lateral surface area
B = base surface area
A = total surface area
Explanation:
Volume of a square pyramid:
V = (1/3)a2h
Slant Height of a square pyramid:
By the pythagorean theorem we know that
s2 = r2 + h2
since r = a/2
s2 = (1/4)a2 + h2, and
s = √(h2 + (1/4)a2)
This is also the height of a triangle side
Lateral Surface Area of a square pyramid (4 isosceles triangles):
For the isosceles triangle Area = (1/2)Base x Height. Our base is side length a and for this calculation our height for the triangle is slant height s. With 4 sides we need to multiply by 4.
L = 4 x (1/2)as = 2as = 2a√(h2 + (1/4)a2)
Squaring the 2 to get it back inside the radical,
L = a√(a2 + 4h2)
Base Surface Area of a square pyramid (square):
B = a2
Total Surface Area of a square pyramid:
A = L + B = a2 + a√(a2 + 4h2))
A = a(a + √(a2 + 4h2))
Which question would most likely be studied by a biologist?
A.
How can a drug that treats cancer be synthesized?
B.
How can cancer-causing substances be regulated?
C.
How much ultraviolet radiation passes through the atmosphere?
D.
What causes cancer cells to grow uncontrollably?
Answer:
The correct answer would be - D. What causes cancer cells to grow uncontrollably?
Explanation:
A Biologist is a person that studies living organisms and the study of living organisms and their process called biology. Biology is a very vast field that involves many branches such as zoology, botany, biochemistry, immunology, biophysics, anatomy, ecology and many more.
So, given all are can be an example of the study biology wanted to do, however, the question most likely studied by a biologist would be What causes cancer cells to grow uncontrollably as it deals with an organism and their biological process.
How is the height of grasses in grasslands related to precipitation?
Short and tall grasses prefer very low amounts of precipitation
o Shorter grasses grow in areas that receive more precipitation
o Taller grasses grow in areas that receive more precipitation
o Short and tall grasses prefer the high amounts of precipitation
Answer:
It just does
Explanation:
Answer:
Tallgrass Praries have more Rainfall
Explanation:
Which of the following could possibly be true about a strong acid? (Check all that apply:).
It will completely dissociate (break apart) when dissolved in water.
It could have a pH of 6
It could have a pH of 13
Only a few of the acid molecules will dissociate (break apart).
It could have a pH of 2.
It could have a pH of 9
Answer:
it could have a pH of 2 it will completely dissociate when dissolved in waterJoelle is a manager at a construction company, and she is interested in the chemistry behind the materials they use. She has begun studying the materials used to fill walls. She knows that to keep the temperature inside a room steady the material must be a thermal insulator, and she predicts that materials should not be acidic or else they would dissolve too easily in water.
Which of these is a molecular ingredient that could be used in a wall-filling material ?
C27H36N2O10
Na6Ba6
NeNa
HCl
Answer:
a
Explanation:
A molecular ingredient that could be used in a wall-filling material is C₂₇H₃₆N₂O₁₀, is not a good thermal insulator, hence option A is correct.
The big molecule C₂₇H₃₆N₂O₁₀ is a poor thermal insulator. Since NeNa is a relatively reactive chemical, it would probably dissolve in water far too quickly. The acidic molecule HCl would dissolve far too quickly in water.
Not a good thermal insulator is C₂₇H₃₆N₂O₁₀. It is a big molecule composed of a lot of hydrogen atoms. Since hydrogen atoms are excellent heat conductors, they would be ineffective in stopping heat from passing through a material used to fill a wall.
Thus, the option (A) C₂₇H₃₆N₂O₁₀ is correct.
Learn more about thermal insulator, here:
https://brainly.com/question/23134662
#SPJ6
Una reacción química es un proceso en el cual se produce un cambio químico, es decir, se consume una o más sustancias a medida que se forman una o más sustancias nuevas.
Answer:
Para ser mas exactos una reaccion quimica es donde los reactivos se transforman en productos.
Explanation:
Durante las reacciones quimicas, ocurren ciertas transformaciones que hace que se tome o se libere energia del medio, generando que los reactivos de la reaccion, es decir los compuestos iniciales, en un determinado espacio y tiempo bajo ciertas condiciones de presion y temperatura exactas se transformen en productos.
Para la quimica, la misma cantidad de materia que se encuentra en los reactivos se mantendra en los productos, es por eso que cada reaccion quimica debe respetar las reglas de la estequiometria y estar balanceadas a la perfeccion.
an engineer chooses to use bamboo as a building material because it grows quickly and needs little space to grow. This is an example of?
Answer:
A) This is an example of Green Design
Explanation:
An example of a product made from a synthetic material is
Question 5 options:
A)
a PET plastic water bottle.
B)
knitted wool socks.
C)
a cotton t-shirt.
D)
a pine 2×4 board.
Hi there! A simple answer and explanation is below :)
Answer:
A) PET plastic water bottle
Explanation:
Plastic goes through a manufacturing process before being used to make bottles for liquids like milk, soda, motor oil, and shampoo, as well as dry items like pharmaceuticals and nutritional supplements. Plastic is made up of a variety of organic polymers, including polyethylene and ethylene, in its unprocessed condition. In a soft state, plastic can be molded into the desired shape and then cast into a solid stat
During nuclear fission and fusion, what is matter that seems to disappear actually converted into?
mass
energy
volume
nuclei
Answer:
The Correct Answer is " Energy"
Goodluck Guys
Explanation:
During nuclear fission and fusion, what is matter that seems to disappear actually converted into energy and the correct option is option 2.
What is Nuclear fission and Fusion?
here are two types of nuclear reactions called nuclear fission and nuclear fusion. These nuclear reactions involve the disintegration and combination of the elemental nucleus.
Nuclear fission refers to the breaking or splitting of a large or parent atom into smaller ones, or two or more daughter atoms.
The term 'nuclear fusion' refers to the process by which two or more atoms combine to form a larger atom. The nuclear fusion process is endothermic because it requires absorbing energy to fuse two atoms.
Both fission and fusion are nuclear reactions that produce energy.
Therefore, During nuclear fission and fusion, what is matter that seems to disappear actually converted into energy and the correct option is option 2.
Learn more about Nuclear fission and fusion, here:
https://brainly.com/question/29141330
#SPJ5
What is the pH of a solution?
O A. A measure of the strength of the acid
B. A measure of the buffering ability of the solution
O c. A measure of the hydrogen gas concentration
O D. A measure of the acidity of the solution
Answer:
D. A measure of the acidity of the solution
Explanation:
pH is a measure of how acidic or basic a solution is, and is measured on a scale from 0-14, where 7 is neutral, anything less than 7 is acidic, and anything more than 7 is basic.
Which of the following statements is true?
a. ΔHfus = ΔHsolid
b. ΔHfus = –ΔHsolid
c. Hfus is always negative.
d. ΔHsolid is always positive.
Answer:
c. Hfus is always negative.
Explanation:
Because energy is released when fusing solids
