Answer:
infinite yield
fortmatting clear and easy to udnerstnadx
Explanation:
90.5 g inf ytield
What are the three eras in the geologic time scale? *
Can anyone explain and answer?
Which physical change are both exothermic
A)condensation and evaporation
B)evaporation and melting
C)freezing and condensation
D)melting and freezing
Answer:
I would say C.)
Explanation:
Freezing and condensation are both ways that heat is let out from an object.
8. What is the molar mass of carbon dioxide, Co2(g)? How many grams of carbon
dioxide would there be for 3 moles? Explain.
Answer:
CO2 molar mass=44.01g
3 moles CO2 = 132.03g
Explanation:
CO2 molar mass = 12.01+2(16.00)=44.01g
3 moles CO2 * (44.01 g CO2)/(1 mol CO2)=132.03g
(Answer would be different depending on the number of decimals)
Which statements describe the fossil record? Check all that apply.
There is very little fossil evidence for the first 4 billion years of Earth.
There is very little fossil evidence for the last 600 million years of Earth.
Most of the fossil evidence is from the first 4 billion years of Earth.
Most of the fossil evidence is from the last 600 million years of Earth.
The fossil record is complete.
The fossil record is not complete.
Answer:
A D F
Explanation:
look at attachment if you don't believe me
Was Dalton's Atomic Theory correct or incorrect and why?
Answer:
The indivisibility of an atom was proved wrong: an atom can be further subdivided into protons, neutrons and electrons. However an atom is the smallest particle that takes part in chemical reactions. ... According to Dalton, atoms of different elements combine in simple whole number ratios to form compounds.
A 2.5 L container holds a sample of hydrogen gas at 291 K and 180 kPa.
If the pressure increases to 350 kPa and the volume remains constant, what will the new temperature be?
Round your answer to one decimal place.
Answer:
The new temperature will be 565.83 K.
Explanation:
Gay Lussac's law establishes the relationship between the temperature and the pressure of a gas when the volume is constant. This law says that the pressure of the gas is directly proportional to its temperature. This means that if the temperature increases, the pressure will increase; or if the temperature decreases, the pressure will decrease.
In other words, Gay-Lussac's law states that when a gas undergoes a constant volume transformation, the ratio of the pressure exerted by the gas temperature remains constant:
[tex]\frac{P}{T} =k[/tex]
When an ideal gas goes from a state 1 to a state 2, it is true:
[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]
In this case:
P1= 180 kPaT1= 291 KP2= 350 kPaT2= ?Replacing:
[tex]\frac{180 kPa}{291 K} =\frac{350 kPa}{T2}[/tex]
Solving:
[tex]T2=350 kPa*\frac{291 K}{180 kPa}[/tex]
T2= 565.83 K
The new temperature will be 565.83 K.
Help me with this pls
What is the charge of an electron?
PLeas hurry
Which of the following matches a human action with its impact?
Construction of dam : Scarcity of water for animals
Use of fertilizers : Increase in the population of aquatic animals
Decrease in honeybee population : Increase in plant population
Construction of roads : Improvement in quality of water in local lakes
Answer:
construction aka A
Explanation:
got 100
What is the name of the ionic compound with the formula:
AlF3
Answer:
potassium chloride.
What is the chemical formula for sodium sulfate
Answer:
Na2So4
Explanation:
Na is group 1, so has a charge of 1+
Sulphate’s formula is SO4 2-,
because sulphate has double the charge of Na, you need two Na’s to make it equal.
Therefore it’s Na2SO4
For species that reproduce asexually, all their offspring are
A. genetically identical
B. genetically different
C. almost identical
D. slightly different
Answer:
A. genetically identical
Explanation:
Asexual reproduction produces offspring that are genetically identical to the parent because the offspring are all clones of the original parent. A single individual can produce offspring asexually and large numbers of offspring can be produced quickly
All the offspring that are produced in the process are genetically identical.
When we talk about this mode of reproduction, we talk about a mode of reproduction in which an organism reproduces without the fusion of gametes. This occurs essentially by cell division.
When this occur, there is no crossing of genetic material as such, all the offspring that are produced in the process are genetically identical.
Learn more about reproduction:https://brainly.com/question/1301963
Mendeleev's proposal of periodic table was based on:
The proposal of the periodic table was based upon properties that appeared with some regularity by laying out the elements from lightest to heaviest.
[hope this is helpful!:))]
PLEASE HURRY
Which of the following is a subsurface event that takes place during the rock cycle?
Deposition
Erosion
Weathering
Plate tectonics
Answer:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Explanation:
Answer:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Explanation:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Which of the following elements is used by your body? A) aluminum B) helium C) calcium D) all of the above
How many moles of H₂O can be produced when 5.5 moles of CO₂ is produced? C₂H₄ + 3 O₂ --> 2 CO₂ + 2 H₂O
Answer:
5.5 mol H2O
Explanation:
Given over what you need and then mole ratio of coefficients in the balanced equation then cross multiply and do PEMDAS for that, and then you got your answer :) hope this helped.
Iron sulfide is a compound. It is made by heating a mixture of iron and sulfur.
Describe and explain the differences between iron sulfide and a mixture of iron and sulfur.
Answer:
Here are some of the differences between a mixture of iron and sulfur, and iron sulfide: the mixture can contain more or less iron, but iron sulfide always contains equal amounts of iron and sulfur. the iron and sulfur atoms are not joined together in the mixture, but they are joined together in iron sulfide.
Explanation:
when an ecosystem changes the results are (positive negative both or none) explain
This is science!
Answer:
C. Both
Explanation:
When an Ecosystem changes the effects can be both positive and negative. It all really just depends on what the change is.
what is the name and classification of a six sided molecule with oh attached
un ejemplo de cambio físico ocurre cuando: a) horneamos pan dulce. b) endulzamos el agua de limón. c) freímos los huevos. d) tostados los granos de café.
Answer:
...
Explanation:
Calculate the mass of 4 moles of CuCl2.
a soccer player kicked a soccer ball up the hill which statement is true
A. the player transferred energy to the ball
B. the potential energy of thr ball decreased
C. the potential energy of the ball did not change
D. the potential energy will increase as the ball rolls back down hill
Answer:
Kinetic energy is transferred from the leg to the ball
Explanation:
Before kicking the ball, you'll need to run to where the position of the ball is which implies that your leg is not at rest, immediately you kick the ball, you will be transferring the kinetic energy of your leg to the ball.
I can hit a metal with a hammer without the metal shattering because of its
Malleability
Ductility
Conductivity
Lustrousness
Answer: Malleability
Explanation: cuz ... its right ... lol
Some items, such as rubber, float on the water, while some items, such as gold, sink in
the water. If an item floats is it more or less dense than the water?
Answer:
If an item is less dense, it floats on the water.
Explanation:
We know this since the more dense something it usually is heavier than if it was less dense. Which ways it down resulting to it sinking.
if you had a block square that weighed 5.00 grams what would be the length of each side
Answer:
[tex]l = 0.793[/tex] cm
Explanation:
Let us assume the density of block square [tex]10[/tex] g/cm³
As we know
Volume = [tex]\frac{Mass}{Density}[/tex]
Thus Volume of this block is equal to [tex]\frac{5}{10} = 0.5[/tex]
As we know volume of square block of side of length "l" is equal to [tex]l^3[/tex]
[tex]l^3 = 0.5[/tex]
[tex]l = 0.793[/tex] cm
Visible light is a part of what spectrum
Answer:
Visible Spectrum/Electromagnetic spectrum
Explanation:
The visible spectrum is the portion of the electromagnetic spectrum that is visible to the human eye.
Osmium metal, the densest element, has a density of 22.6 g/mL, while hydrogen, the least dense element, has a density of 8.99 e-5 g/mL. Calculate the volume occupied by 1.00 g of each element. How many times more dense is osmium than hydrogen?
Answer:
1. Volume of osmium = 0.044 mL
2. Volume of Hydrogen = 11123.47 mL
3. Osmium is 251390 times denser than hydrogen
Explanation:
From the question given above, the following data were obtained:
Density of osmium = 22.6 g/mL
Density of Hydrogen = 8.99×10¯⁵ g/mL
Mass of osmium = 1 g
Mass of Hydrogen = 1 g
1. Determination of the Volume of osmium.
Density of osmium = 22.6 g/mL
Mass of osmium = 1 g
Volume of osmium =?
Density = mass /volume
22.6 = 1 / volume
Cross multiply
22.6 × volume = 1
Divide both side by 22.6
Volume = 1 / 22.6
Volume of osmium = 0.044 mL
2. Determination of the Volume of Hydrogen.
Density of osmium = 8.99×10¯⁵ g/mL
Mass of osmium = 1 g
Volume of osmium =?
Density = mass /volume
8.99×10¯⁵ = 1 / volume
Cross multiply
8.99×10¯⁵ × volume = 1
Divide both side by 8.99×10¯⁵
Volume = 1 / 8.99×10¯⁵
Volume of Hydrogen = 11123.47 mL
3. Determination of the number of times osmium is denser than hydrogen.
Density of osmium (Dₒ) = 22.6 g/mL
Density of Hydrogen (Dₕ) = 8.99×10¯⁵ g/mL
Dₒ / Dₕ = 22.6 / 8.99×10¯⁵
Dₒ / Dₕ = 251390
Cross multiply
Dₒ = 251390 × Dₕ
Thus, osmium is 251390 times denser than hydrogen.
A metal can form
A.
a stable nucleus
B.
an anion
C.
a new family
D.
a cation
Guys pleasee helpp 20 points
what do igneous rocks become when they break down and settle into layers?
Answer:
Sedimentary rocks
Explanation:
Igneous rocks will become sedimentary rocks when they break down and settle into layers .
Igneous rocks are rocks that are formed by the cooling and solidification of magma within or on the earth crust.
When agents of weathering and denudation forces acts on a rock body, they break them down producing sediments in the process.
Sediments are transported into depositional basins where they are laid down and cemented together. This in turn forms sedimentary rocks. The break down and settling of sediments leads to the formation of sedimentary rocks.