Answer:
[tex]\implies \sf D = \dfrac{PM}{RT}[/tex]
[tex]\implies \sf 3.35= \dfrac{1 \times M}{ \frac{1}{12} \times 298}[/tex]
[tex]\implies \sf 3.35= \dfrac{12\times M}{ 298}[/tex]
[tex]\implies \sf 3.35 \times 298= 12\times M[/tex]
[tex]\implies \sf 998.3= 12\times M[/tex]
[tex]\implies \sf M = \dfrac{998.3}{12} [/tex]
[tex]\implies \bf M = 83.1917 \: \frac{g}{mol} [/tex]
A student has a sample of ocean water that they take to science class. what steps could be taken to determine to classify the ocean water as a suspension, solution, element, or compound?
A) Examine the pH of the sample. If the pH is exactly neutral, it is a pure substance that is a compound.
B) Evaporate the water. If salt is left behind, the sample is a mixture that can be defined as a solution.
C) Let the sample settle. If the salt settles to the bottom, it is a mixture that is classified as a solution.
D) Observe the diffraction of light as it moved through the sample. If light does not scatter, it is a pure substance that is elemental.
Answer:
A or D because B and C dont make sense
why are baseballs harder to pick up tennis balls?
Explanation:
Because baseballs are made out of things that make it heavier then tennis balls, easier to play the sport. that's why they use a bat in baseball.
how many grams of magnesium cyanide would you need to add to 275 ml of water to make a 0.075 molal solution
The mass of magnesium cyanide needed to prepare the solution is 1.57 g
We'll begin by calculating the number of mole of Mg(CN)₂. This can be obtained as follow:
Volume = 275 mL = 275 / 1000 = 0.275 L
Molarity of Mg(CN)₂ = 0.075 M
Mole of Mg(CN)₂ =?Mole = Molarity x Volume
Mole of Mg(CN)₂ = 0.075 × 0.275
Mole of Mg(CN)₂ = 0.020625 mole
Finally, we shall determine the mass of Mg(CN)₂Mole of Mg(CN)₂ = 0.020625 mole
Molar mass of Mg(CN)₂ = 24 + 2(12 + 14) = 76 g/mol
Mass of Mg(CN)₂ =?Mass = mole × molar mass
Mass of Mg(CN)₂ = 0.020625 × 76
Mass of Mg(CN)₂ = 1.57 g
Therefore, 1.57 g of Mg(CN)₂ is needed to prepare the solution
Learn more: https://brainly.com/question/3126258
What is the acceleration of a 10 kg pushed by a 5N force
Answer:
0.5 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
f is the force
m is the mass
From the question we have
[tex]a = \frac{5}{10} = \frac{1}{2} = 0.5 \\ [/tex]
We have the final answer as
0.5 m/s²Hope this helps you
which of these is a rough approximation of the cogito?
Given the Latin meaning of the cogito, we can confirm that it is roughly translated and summarized by the phrase "I think, therefore I am".
Cogito, ergo sum or "The Cogito" is an extremely popular, well-known philosophical phrase credited to Rene Descartes. This Latin phrase is roughly translated as "I think, therefore I am", which appeared originally in "The Principles of Philosophy", and was later translated to a variety of languages in an attempt to reach a wider public, most notably into Latin.
To learn more visit:
https://brainly.com/question/16853649?referrer=searchResults
When light waves pass through solids, the speed of the wave ___________.
remains the same
decreases
increases
It woukd decrease.
I am sure its correct you can trust me becuase I took the test.
Answer:
The speed of the wave decreases.
Explanation:
When light waves do pass through a medium, any solid, liquid, or gas, the speed of the waves actually decreases. Solids are more dense than liquids, so they decrease the speed of light even more.
(I did the quiz btw!!)
How many moles of iron are in 50.0g of iron? How many iron atoms are in 59.0g of iron?
Answer:
[tex]50.0 \div 59.0 = 10[/tex]
right
What is the chemical formula for ammonium carbonate?
What is the frequency of yellow light, which has a wavelength of 5.56 x 10^-7 m?
O A) 5.40 x 10^14 m/s
O B) 5.40 x 10^14 Hz
O C) 1.85 x 10^15 m/s
O D) 1.85 x 10^15 Hz
The frequency of yellow light, which has a wavelength of 5.56 x 10^-7 m is 5.40 x 10^14 Hz. Therefore, option B is correct.
What do you mean by wavelength ?The distance between identical points (adjacent crests) in adjacent cycles of a waveform signal propagated in space or along a wire is defined as the wavelength. This length is typically specified in wireless systems in meters (m), centimeters (cm), or millimeters (mm) (mm).
The wavelength is the distance between two wave crests, and it is also the distance between two wave troughs. The frequency is measured in cycles per second (Hz) and is the number of vibrations that pass over a given spot in one second (Hertz).
Speed is distance over time, Therefore, v = λ / T.
The frequency, f, is 1/T, so the equation relating wave speed, frequency, and wavelength is v = c / λ .
Given :
Wavelength = 5.56 x 10^-7 m
Frequency = ?
Speed (c) = 3 × 10⁸m/s
v = c / λ
By substituting given values in equation and we get,
v = 3 × 10⁸ / 5.56 x 10^-7
= 5.40 x 10^14
The frequency of yellow light is 5.40 x 10^14.
Thus, option B is correct.
To learn more about the wavelength, follow the link;
https://brainly.com/question/13533093
#SPJ6
Soil forms layers when mixed with water. sand is found above what ?
Answer:
Explanation:
Clay:)Why is the Milky Way considered a galaxy
Answer:
Explanation:
All the stars we see in the night sky are in our own Milky Way Galaxy. Our galaxy is called the Milky Way because it appears as a milky band of light in the sky when you see it in a really dark area.
Answer: it is
Explanation: A galaxy is a system of millions or billions of stars, together with gas and dust, held together by gravitational attraction, plus there are 100 billion planet in it.
What makes a hydrocarbon saturated?
Answer:
Explanation:
It's easier to answer what makes it unsaturated.
H - C ≡ C - H
This is Acetylene. It has three shared bonds between the two carbons. That many bonds makes it unsaturated.
H H
H - C - C - H
H H
Draw lines from 1 H on top to the Carbon underneath Do the same with the other hydrogen. Make the two Hydrogens on the bottom do the same thing.
The point is that Carbon has 4 bonds. 1 bond goes to the other Carbon. The other 3 take on Hydrogen. That molecule is saturated: nothing can be added in its natural state.
Can anyone please answer questions 3 and 4
I’ll give the brainiest!
Answer:
1.Phenolphthalein
2.Method
a.Use the pipette and pipette filler to add 25 cm 3 of alkali to a clean conical flask.
b.Add a few drops of indicator and put the conical flask on a white tile.
c.Fill the burette with acid and note the starting volume.
d.Slowly add the acid from the burette to the alkali in the conical flask, swirling to mix.
Explanation:
Which of the following are required for plants to carry out photosynthesis?
Answer:
To perform photosynthesis, plants need three things: carbon dioxide, water, and sunlight
A 250. mL sample of oxygen is collected over water at 25 °C and 760.0 torr pressure. What is the partial pressure
of the oxygen? (Vapor pressure of water at 25°C is 23.8 mm Hg)
Answer:The mass of oxygen gas sample collected over water is 0.544 g.
The given parameters;
temperature of the oxygen gas, t = 25 °C
total pressure of the gas, P = 644 torr
volume of the gas, V = 500 mL
vapor pressure = 23.8 torr
molar mass of oxygen gas = 32 g/mol
The number of moles of the gas collected is calculated by using ideal gas equation as follows;
PV = nRT
where;
R is the ideal gas constant = 62.36 L.torr/mol.K
P is the pressure of the gas = 644 torr - 23.8 torr = 620.2 torr
T is the temperature of the gas = 25 + 273 = 298 K
V is the volume of the gas = 500 mL = 0.5 L
The number of moles of the gas is calculated as follows;
The mass of oxygen gas collected is calculated as follows;
m = 0.017 (32 g/mol)
m = 0.544 g
Thus, the mass of oxygen gas sample collected over water is 0.544 g.
Explanation:
The partial pressure of oxygen is; 760.0 torr - 23.8 torr = 736.2 torr.
What is partial pressure?We know that in a mixture of gases, the pressure that is exerted by each gas is called the partial pressure of the mixture.
In this case, we have the total pressure of the mixture as 760.0 torr and the vapor pressure of water as 23.8 mm Hg or 23.8 torr) at that temperature. Hence, the partial pressure of oxygen is; 760.0 torr - 23.8 torr = 736.2 torr.
Learn more about partial pressure:https://brainly.com/question/14281129
#SPJ2
To make hot cocoa on the trip, you will need to boil water. Construct an
explanation that describes how the lower air pressure in the mountains affects
this process.
i need an answer in under an hour pls help
Answer:
the water in the mountains will take longer to boil, because of the higher atmospheric pressu
Which would best describe the way an organism reacts to other organisms or to its
environment?
A. Instinct
B. Behavior
C. Conditioning
D. Imprinting
Answer:
Explanation:
Behavior
How many atoms of lithium are there in 18.2mg of lithium? Dimensional analysis only!
Answer:7.25
Explanation:
This is because 18.2 - 7.2 = 11 +7.2 = 18.2
some macromolecules are polymers. what is a polymer
Answer:
1 marcomolecules are:- A macromolecule is a very large molecule, such as a protein. They are composed of thousands of covalently bonded atoms. Many macromolecules are polymers of smaller molecules called monomers.
2 polymers are:- a natural or artificial chemical compound consisting of large molecules
Explanation:
hope it helps you
What is the major product formed when the alcohol is treated with hcl?.
Answer: Alcohol undergoes nucleophilic substitution when reacted with hydrohalic acids (HX) such as HCl.
Explanation:
What structural characteristic do all of the atoms within a group (vertical columns) have in common?
Answer:
The vertical columns (groups) of the periodic table are arranged such that all its elements have the same number of valence electrons. All elements within a certain group thus share similar properties.
hope this helps
Explanation:
Each column is called a group. The elements in each group have the same number of electrons in the outer orbital. Those outer electrons are also called valence electrons. They are the electrons involved in chemical bonds with other elements.
How can you classify matter?
Answer:
Matter can be broken down into two categories: pure substances and mixtures. Pure substances are further broken down into elements and compounds. Mixtures are physically combined structures that can be separated into their original components. A chemical substance is composed of one type of atom or molecule.
Hope this helps :)
If you have 1 mol xe and 1 mol f₂, how many moles of xef₄ can you create in the following chemical reaction? xe (g) 2 f₂ (g) → xef₄ (g).
The number of moles of XeF4 that can be created would be 0.5 moles.
From the equation of the reactiobn:
Xe (g) 2 F₂ (g) ---> XeF₄ (g)
The mole ratio of Xe to F2 is 1:2. Hence, in the presence of 1 mole Xe and 1 mole F2, F2 would be limiting the reaction.
This means that the amount of F2 would determine the amount of XeF4 that would be produced from the reaction.
The mole ratio of F2 to XeF4 according to the equation is 2:1. This means that for every 1 mole of F2 introduced into the reaction, 0.5 moles of XeF4 will be produced.
In this case, 1 mole of F2 is introduced. Thus, the mole of XeF4 that would be produced would be:
1/2 = 0.5 moles.
More on stoichiometric calculations can be found here: https://brainly.com/question/8062886?referrer=searchResults
Which is an example of a physical change?
A) Mixing blue and yellow paint to create green paint
B) Adding water and yeast to bread dough in order to make it raise.
C) Mixing two liquids together in a test tube and the tube becoming warm.
D) Adding a piece of chalk containing calcium carbonate to a glass of mild acid causing the information of a foam of bubbles.
what is temperature?
Answer:
a measure of hotness or coldness expressed in terms of a scale like Fahrenheit or Celcius
Which one of the following would form a precipitate when mixed with LiOH?
A) KNO3
B) NH4Cl
C) Ca(C2H3O2)2
D) ZnBr2
Answer:
ZnBr2
Explanation:
KNO3 + LiOH -------> no reaction
This is because KNO3 and LiOH completely ionize.in water and form neutral solutions.Since both are neutral no reaction occurs
NH4Cl + LiOH -----> NH3 (aq) + H2O (l) + LiCl(aq)
None of the above products are precipitates
Ca(C2H3O2)2 + 2LiOH -----> Ca(OH)2 (aq) + 2LiC2H3O2 (aq)
ZnBr2 + 2LiOH -----> Zn(OH)2 (s) + LiBr2 ( aq)
Zn(OH)2 thus formed is a white precipitate
However when excess LiOH is added Zn(OH)2 precipitate will dissolve to give a clear solution of Li2ZnO2 .
You can remember this by the fact that Na,K,Rb,Cs,Ca,Sr,Ba hydroxides are soluble in water and all other hydroxide are precipitated in water
Zn(OH)2 (s) + 2 LiOH ------> Li2ZnO2(aq) + 2 H2O ( l)
The only compound that will form a precipitate with LiOH would be ZnBr2
Precipitation reactionsThese are double displacement reactions in which precipitates are produced. Precipitates are insoluble solids formed from the combination of ions in aqueous solutions.
In this case, a reaction between LiOH and ZnBr2 would be as follows;
2LiOH + ZnBr2 ----------> 2LiBr + Zn(OH)2 (s)
Zn(OH)2 is an insoluble salt and will precipitate out in the solution.
More on precipitation can be found here: https://brainly.com/question/5019199
What would happen if we didn’t have the Milky Way
_____ is the tendency of an atom in a compound to attract electrons (F is super attractive and Fr is super unattractive).
The answer is Electronegativity.
_ is the process in which an element spontaneously transforms into another isotope of the same element, or into a different element.
Answer:
Nuclear transmutation
Explanation:
The process in which an element spontaneously transforms into another isotope of the same element, or into a different element is called nuclear transumutation. It occurs when the number of protons or neutrons in the nucleus of an atom is changed.
Hurry and Help for Brainlist
An unknown substance has a boiling point (oC) 20.0. Predict if the substance will be a Gas, Solid or liquid at the room temperature (25oC)?
Question 14 options:
Liquid
Gas
Solid
None of the above