The missing term in the code that handles the error is `raise` because it is required to raise an error message in Python programming language.
What is an error?
An error is a deviation from accurate, correct, or desired behavior. For instance, if you try to compile code that contains a syntax error, the compiler will throw a syntax error. This error might be produced if you use a semicolon (;) instead of a comma (,) to separate elements in a list, for example. Types of errors in programming: Syntax errors: These errors arise as a result of a mistake in the syntax of the language. Lexical errors: These errors arise as a result of mistakes in the lexicon, such as a missing closing quotation mark in a string, which causes the compiler to ignore the remainder of the code. Semantic errors: These arise when code does not behave as intended but is still grammatically correct in the language being used.
Example: If you write '2 + 2 = 5' instead of '2 + 2 = 4,' it will pass the syntax check, but it will throw a semantic error when run.Logical errors: These arise when the code runs but does not produce the intended result. Example: If you have a loop that is intended to sum the values in a list, but you forget to initialize the sum variable to zero before entering the loop.
Read more about the syntax:
https://brainly.com/question/831003
#SPJ11
some trojan horses contain a virus or a worm, which can replicate and spread. virus experts call this a(n) threat because it combines more than one type of malicious code.
Some trojan horses contain a virus or a worm, which can replicate and spread. Virus experts call this a blended threat because it combines more than one type of malicious code.
A blended threat is a combination of computer viruses, worms, and Trojan horses. Blended threats usually exploit security vulnerabilities or software bugs to spread rapidly through networks. Blended threats can be engineered to create a distributed denial of service (DDoS) attack or to provide remote control over your system to attackers. In most cases, blended threats require no human interaction to spread, so they may infect computer systems or networks before users are aware of their presence. Because of their stealthy nature, blended threats can often evade the most sophisticated intrusion detection systems (IDS) and intrusion prevention systems (IPS).
As a result, organizations must make sure that their systems are up to date with the latest patches and upgrades to avoid the risk of blended threats.
You can learn more about trojan horses at
https://brainly.com/question/354438
#SPJ11
Kevin, the trainee analyst at Lynach TechSystems, is in charge of allocating suitable Unified Modeling Language (UML) notations to a particular class diagram. In a given diagram, Kevin is designing a relationship in which a given employee can have no payroll deductions or he/she can have many deductions. Which of the following notations should Kevin write to mark this relationship?
a.1
b.0..*
c.1..*
d.0..1
The notation that Kevin should write to mark the relationship between an employee and payroll deductions where an employee can have no payroll deductions or he/she can have many deductions is "0..*."
A class diagram is a kind of diagram in UML that depicts the structure of a framework by indicating the classes that make up the system, their attributes, and the relationships between them. It portrays a method or an application in terms of the classes and interfaces that make it up and the collaborations between those elements that implement the behavior of the entire system. A relationship in UMLA relationship in Unified Modeling Language (UML) is a connection between two or more things.
These things can be entities, classes, components, actors, or any other model element. There are several types of relationships in UML, including inheritance, association, aggregation, and composition, among others.
Learn more about UML: https://brainly.com/question/15078406
#SPJ11
These questions are from the sql database query,
Find the highest rated apps with a user rating of at least 4. 6, have at least 1000 reviews, and does not have a content rating of ‘Everyone’.
Find the total number of apps for each of the 6 content rating categories.
Find the top 3 highest rated apps in the category of ‘TOOLS’ that have more than 225,000 reviews. Also, include at least 1 positive review for each of the top 3 apps in the visualization
To find the highest rated apps with a user rating of at least 4.6, have at least 1000 reviews, and does not have a content rating of ‘Everyone’, you would need to have access to the app store or platform where the apps are listed.
From there, you would need to filter the apps based on their user rating and the number of reviews they have received. Then, you would need to further filter the apps based on their content rating to exclude those with a rating of ‘Everyone’.
To find the total number of apps for each of the 6 content rating categories, you would need to have access to the app store or platform where the apps are listed. From there, you would need to group the apps based on their content rating and count the number of apps in each group.
To find the top 3 highest rated apps in the category of ‘TOOLS’ that have more than 225,000 reviews, you would need to have access to the app store or platform where the apps are listed. From there, you would need to filter the apps based on their category and the number of reviews they have received. Then, you would need to rank the remaining apps based on their user rating and select the top 3. Finally, you would need to find positive reviews for each of the top 3 apps and include them in a visualization.
Learn more about apps here brainly.com/question/11070666
#SPJ4
Using Access, open the Relationships window and identify all of the one-to-many relationships in the database as well as the field used in both tables to make the connection using the following pattern found in SQL, when connecting two tables using WHERE or INNER JOIN clause. An example of one of the relationships is provided as a guide.
To identify all of the one-to-many relationships in the database as well as the field used in both tables to make the connection using the following pattern found in SQL when connecting two tables using the WHERE or INNER JOIN clause in Access, open the Relationships window. Given that an example of one of the relationships is given as a guide, the other relationships can be recognized with the help of the ER Diagram or Table Relationships.
The ER Diagram is a logical or conceptual representation of an enterprise's data. It is used to depict the various connections between tables or entities in the system. For each pair of tables that are linked in a one-to-many relationship, the table on the 'one' side should be listed first, followed by the table on the 'many' side.
Access allows the creation of relationships between tables or entities. The Relationships window allows you to see how the various tables in a database are connected. Relationships are formed based on one or more fields that link two tables. These links are formed by selecting the relevant field in each table that is shared between the two tables in the Relationships window. Here is the pattern:
Table1 INNER JOIN Table2 ON Table1.
Field1 = Table2.
Field1
For Example, let's say we have a table of Customers and a table of Orders, where the CustomerID is the field that links the two tables. Here are the relationships:
Customer.CustomerID to Orders.CustomerIDHere's the SQL:
Customers INNER JOIN Orders ON Customers.CustomerID = Orders.CustomerIDLearn more about SQL: https://brainly.com/question/29216782
#SPJ11
How do I fix the default permission settings do not grant Local Activation permission for COM server application with Clsid?
To fix the issue where the default permission settings do not grant Local Activation permission for COM server application with Clsid, you can follow these steps: Click the Start and search dcomcnfg, click on DCOM Config, Properties, Security tab, Launch and Activation Permissions, Local Service and Restart your computer.
Click the "Start" menu and search for "dcomcnfg" (without the quotes) and hit Enter.In the Component Services window that opens up, expand the "Computers" folder, then the "My Computer" folder, and then click on "DCOM Config".Scroll down the list of applications until you find the one with the Clsid that is causing the issue. Right-click on it and select "Properties".In the Properties window, go to the "Security" tab.Under "Launch and Activation Permissions", click on "Edit".Click on "Add" and type "Local Service" (without the quotes) and click "OK".Select "Local Service" in the list of group or user names and then tick the box next to "Local Activation" under "Permissions for Local Service".Click "OK" to close all the windowsRestart your computer for the changes to take effect.These steps should grant Local Activation permission for the specified COM server application with Clsid, and should resolve the issue with default permission settings.
Learn more about default permission settings :https://brainly.com/question/30082022
#SPJ11
Occurs when you click a pop-up or banner advertisement on a web site and go to the advertiser's website.a. click throughb. Adwarec. advertising
When you click on a pop-up or banner advertisement on a website and go to the advertiser's website, it is known as a click-through.
A click-through refers to the action of clicking on an online advertisement that redirects the user to another website, usually the advertiser's website. Click-through rate (CTR) is a measure of the success of an online advertisement campaign. It's a ratio that compares the number of people who clicked on an ad to the total number of people who saw the ad. CTR is used to assess the effectiveness of an online advertising campaign by tracking how many people clicked on an ad and then proceeded to take a particular action.
Adware is a type of malware that displays unwanted advertisements on a device. Adware infections can display advertisements in a variety of ways, including pop-up windows, banners, and links. Adware programs are not inherently dangerous, but they can slow down computers and make them more vulnerable to other malware infections. Advertising is the act of promoting or selling a product, service, or idea through various forms of media. Advertising is intended to persuade people to buy or use a product or service by presenting it in a favorable light. The most frequent types of advertising are print, television, radio, and digital media.Therefore, when you click on a pop-up or banner advertisement on a website and go to the advertiser's website, it is known as a click-through.Learn more about click-through visit:
https://brainly.com/question/29987743
#SPJ11
A user submitted a support ticket that states all of the printouts from a laser printer appear to have double images imposed on them. A review of past printer support tickets shows that a maintenance kit has not been installed in more than a year. Which of the following printer consumables is MOST likely causing the issue?
A. Separation pad
B. Transfer roller
C. Ink cartridge
D. Fuser
Option d is correct, Fuser is the printer consumables which is most likely causing the issue.
The issue described, where printouts have double images imposed on them, is a common symptom of a faulty fuser in a laser printer.
The fuser is responsible for bonding toner to the paper, and if it is not functioning properly, it can cause double images or smudging on the printouts.
Given the lack of maintenance kit installation for over a year, it is highly likely that the fuser needs to be replaced or repaired.
To learn more on Fuser click:
https://brainly.com/question/14902244
#SPJ2
2d arrays are declared in row, column order, meaning first value is number of rows, second value is number of columns. (true or false)
No, it is untrue that 2D arrays are declared in row-column order, where the first value represents the number of rows and the second value represents the number of columns.
In programming, a 2D array is a type of data structure that is used to hold and modify groups of values that are arranged in a grid or table-like style. Because it has two dimensions—rows and columns—it is known as a 2D array. The position of each element in the array within the grid, which is determined by a pair of indices—one for the row and one for the column—is used to identify it. Several programming activities, including image processing, matrix operations, and game development, frequently use 2D arrays. They are especially helpful for displaying information that can be arranged into a grid or table, such as the locations of game boards or the pixels in an image.
Learn more about 2D arrays here:
https://brainly.com/question/27171171
#SPJ4
Often, programmers list the ____ first because it is the first method used when an object is created.a. instanceb. constructorc. accessor
Often, programmers list the constructor first because it is the first method used when an object is created.
A constructor is a unique method of the class that is executed when an instance of a class is created. It has the same name as the class and is created as a separate method. The constructor is also used to assign values to variables when the object is created. You can define constructors with or without parameters. The object's properties and variables can be initialized with the help of a constructor. Here's an example of how to create a constructor:
class Car {
String name;
int model_number;
Car(String name, int model_number) {
// The constructorthis.name = name;
this.model_number = model_number;
}
public static void main(String[] args) {
Car car1 = new Car("BMW", 11);
Car car2 = new Car("Audi", 2021);
System.out.println(car1.name + " " + car1.model_number);
System.out.println(car2.name + " " + car2.model_number);
}
}
As we have defined a constructor for the Car class and used the Car object to initialize the name and model_number properties.
Learn more about constructor visit:
https://brainly.com/question/13025232
#SPJ11
Homer is revising some internal documentation at his company. He has been asked to verify whether a certain key performance indicator is currently being met in regard to the average amount of time it takes to repair a device or service after it has experienced a non-fatal error. Which of the following is the term which best describes this KPI? a. MTBF b. RTO C.MTRR d. RPO
The term which best describes the KPI that Homer is revising at his company is RTO because it is a metric used to define the amount of time within which services must be restored after a failure.
RTO stands for Recovery Time Objective. In a disaster recovery strategy, RTO is a critical component for determining how long an enterprise can operate without critical systems before experiencing unacceptable losses.An RTO determines how long an organization's business processes and operations can survive before a service interruption or application outage occurs.
The RTO is based on the criticality of the business process, system availability requirements, and the company's overall business continuity policy. Thus, the Recovery Time Objective is the maximum tolerable length of time that a computer, system, network, or application can be down following a failure before the loss of organization or system functionality has unacceptable consequences.
MTBF, or Mean Time Between Failures, is a statistical measure of the average time a product or system will perform satisfactorily. This measure is widely used in the manufacturing and engineering industries to determine the reliability of a product or system.
MTRR, or Memory Type Range Registers, is a CPU feature that specifies how system memory can be accessed. RPO, or Recovery Point Objective, is a metric used to define the maximum amount of time that an organization's processes or data can be lost following a service interruption or disaster. An RPO determines the amount of data loss an organization can tolerate before experiencing unacceptable business impacts or consequences.
You can learn more about Recovery Time Objective at: brainly.com/question/28386707
#SPJ11
which tool would help assess a student’s oral language competence and provide documentation of progress?
It may consist of transcripts of conversations, written assignments, recordings of oral language evaluations, and other documentation of the student's language competence.
The process of gathering, compiling, and preserving written or digital records of information is referred to as documentation. It is a necessary tool for a variety of occupations, such as those in healthcare, education, and business. Documentation is essential in the context of education for monitoring student progress, recording learning goals, and assessing results. It enables educators to document observations, evaluations, and other information that can be utilised to decide on instructional approaches and student requirements. Due to the fact that it serves as a record of the actions and decisions made, documentation also aids in ensuring accountability and transparency. Communication, cooperation, and decision-making can all be improved with the use of effective documentation techniques, both inside and outside of the classroom.
Learn more about documentation here:
https://brainly.com/question/11440049
#SPJ4
when exploring the k-means clustering of a data set you examine the projections of the first two principle component of the cluster ellipses, for a certain number of clusters, and you observe: * the major and minor axes of each of the ellipses are of distinctly different length. * the directions of major axes of the ellipses are distinctly different. which of the following statements is true? a. the number of clusters chosen is too many for this dataset and should be reduced. b. the number of clusters chosen fits this dataset well. c. clustering is not a useful method for this dataset. d. the clusters will exhibit a poor separation
The number of clusters chosen fits this dataset well when exploring K-means. The correct answer is b.
Cluster analysis is a class of techniques for identifying objects or individuals that are related or related to each other. K-means clustering, the most popular technique, is used to classify objects into K-numbered clusters in a data set. It is used in statistics, bioinformatics, computer science, marketing, and many other fields.K-means clustering of a data set involves examining the projections of the first two principle components of the cluster ellipses for a certain number of clusters. When the number of clusters chosen fits the dataset well, then it implies that the projections of the first two principle components of the cluster ellipses, for a certain number of clusters, shows that the major and minor axes of each of the ellipses are of distinctly different length, and the directions of major axes of the ellipses are distinctly different.In other words, when the projections of the first two principle components of the cluster ellipses, for a certain number of clusters, show that the major and minor axes of each of the ellipses are of distinctly different length and the directions of major axes of the ellipses are distinctly different, then it means that the number of clusters chosen fits this dataset well.The correct answer is b.Learn more about K-means here: https://brainly.com/question/17241662
#SPJ11
true/false: c does not perform array bounds checking, making it possible for you to assign a pointer the address of an element out of the boundaries of an array.
The given statement "c does not perform array bounds checking, making it possible for you to assign a pointer the address of an element out of the boundaries of an array" is TRUE.
The array is the set of values of the same data type that can be stored sequentially in memory using a single name. You can consider it as a set of containers that hold a particular type of data with a unique name. For example, an array can store ten values of the int data type. However, it is a bit of a double-edged sword.
On one hand, the array can improve the efficiency of the program's operation, and on the other hand, it can also put the system in danger if not used correctly. One example of it is array bounds checking.
Most programming languages that support arrays perform bounds checking to ensure that the array is only accessed within the bounds of the memory allocated for it. However, in the case of C, it does not perform any such checks, and if you try to access an array's elements beyond its bounds, it will generate an error.
It is also possible to assign a pointer the address of an element out of the boundaries of an array in C. However, the program will not check whether the address is in the array boundaries or not. It can cause a variety of errors, including program crashes or security vulnerabilities.
Learn more about address: https://brainly.com/question/19726435
#SPJ11
What is the output?
>>> answer = "five times"
>>> answer[1:6]
Answer:
Any information that has been processed by sent out from a computer or similar device is considered output. A simple example of output is anything you view on your computer monitor.
How to open NAT type for multiple PC's?
Opening NAT type for multiple PCs requires you to create a static IP address and forwarding ports on your router. This will allow the router to allocate a specific IP address to each device that will always be the same.
Opening NAT type for multiple PC's- To open NAT type for multiple PCs, follow the steps below:
Step 1: Get the MAC addresses of all PCs. Ensure that you have the MAC addresses of all the devices that you want to connect to the network. The MAC address is the unique address that identifies each device on the network. To find the MAC address on a PC, open the command prompt and type "ipconfig/all"
Step 2: Reserve an IP address for each device. Once you have the MAC addresses, you can reserve an IP address for each device. This ensures that each device will always have the same IP address. You can do this by logging into your router and creating a static IP address.
Step 3: Port forwarding. Once you have created static IP addresses, you will need to forward the ports for each device. This involves opening the required ports for each device on your router. This can be done by accessing your router settings and forwarding the required ports. To do this, you will need to know which ports to forward for each device. You can find this information online, or by contacting the manufacturer of your devices.
To learn more about "open NAT", visit: https://brainly.com/question/31143418
#SPJ11
please describe the hardware components you need to create this data center and briefly explain the function of each components.
To create a data center, various hardware components are required.
What's data centerThe data center is the most important component of the cloud computing infrastructure.
The following are the main hardware components that are needed to set up a data center:
Server: It is a central computer that manages data storage, network traffic, and software applications. It is the most important component of a data center.
Storage device: The storage device is used to store data. It could be a hard drive, tape drive, or cloud-based storage. The data center's storage system must have redundancy to guarantee data integrity and high availability.
Routers and Switches: Routers and switches are used to connect servers to each other and to the Internet. A router is a device that directs data packets to their intended destination, while a switch is used to connect devices within the data center.
Firewall: A firewall is used to protect the data center from unauthorized access, virus, and malware attacks.
Cooling and Power Supply: Data centers require specialized power and cooling systems to ensure reliable operation. They must have backup power and cooling systems to keep the servers and equipment operational even during power outages.
Backup systems: Backups are critical for data centers because they provide a way to recover data in the event of a disaster or hardware failure. Backups should be taken frequently, and they should be stored in a secure, offsite location where they can be easily accessed in the event of a disaster or data loss.
Learn more about data center at
https://brainly.com/question/14517816
#SPj11
what command would you use in ubuntu linux to get permission to install software?
To get permission to install software on Ubuntu Linux, you would need to use the sudo command. Sudo stands for "superuser do" and allows you to execute commands as the superuser or administrator.
Here are the steps to use the sudo command:Open a terminal window by pressing Ctrl+Alt+T on your keyboard.Type in the command you want to run, for example, "sudo apt-get install [package name]".Press Enter on your keyboard.You will be prompted to enter your password. Type in your user password and press Enter.If the password is correct, the command will be executed with administrative privileges, allowing you to install the software.Note: Only use the sudo command for commands that require administrative privileges. Using the sudo command can be dangerous, so it's important to be careful and only use it when necessary.
To learn more about Linux click the link below:
brainly.com/question/13267082
#SPJ4
Go to cell I7 and insert a nested function that displaysDue for raiseto allmanagers that earn less than $85,000 and N/A for anyone that does not fit the criteria =IF(AND(D7="manager",G7
Given the function=IF(AND(D7="manager",G7<85000),"Due for raise","N/A"), insert a nested function that displays
Due for raise to all managers that earn less than $85,000 and N/A for anyone that does not fit the criteria in cell I7. Below is the answer:```
=IF(AND(D7="manager",G7<85000),"Due for raise",IF(AND(D7="manager",G7>=85000),"N/A","N/A"))
```The solution above satisfies the conditions of the question asked. Therefore, it is correct.
To learn more about "nested", visit: https://brainly.com/question/31143400
#SPJ11
venus is a member of the it department at a company that has a moderately-sized network. one of her performance review objectives is to help her department be more proactive relative to being notified, and responding to, certain events that occur in the network. what type of server will help her meet the objective?
A network monitoring server might be helpful for Venus to achieve her goal of becoming more proactive in her responses to network occurrences.
What kind of proactive monitoring is there in IT?Proactive monitoring in the context of monitoring products typically entails spotting potential problems with IT infrastructure and apps before users discover them and complain and taking steps to stop the problem from being visible to users and having an adverse impact on the business.
Which four forms of monitoring are there?We define and categorise four forms of monitoring—surveillance, implementation, efficacy, and ecological effects—each of which is intended to address a distinct set of objectives.
To know more about network visit:-
https://brainly.com/question/14276789
#SPJ1
when an organization seeks transference of information security risk, it is likely to make which purchase? server hard drives penetration testing services company vehicles with anti-lock brakes cyberliability insurance
When an organization seeks transference of information security risk, it is likely to purchase (F) cyber liability insurance.
Cyber liability insurance helps organizations protect against financial losses from cybersecurity incidents such as data breaches, network damage, and cyber extortion. The insurance policy covers the cost of legal fees, customer notification, credit monitoring, data recovery, and any other costs associated with the breach. By purchasing cyber liability insurance, the organization transfers the financial risk of a cybersecurity incident to the insurance company, reducing its own financial liability.
You can learn more about Cyber liability insurance at
https://brainly.com/question/28524123
#SPJ11
A company has only three laptops that connect to their wireless network. The company is currently
using WEP encryption on their wireless network. They have noticed unauthorized connections on
their WAP and want to secure their wireless connection to prevent this. Which of the following
security measures would BEST secure their wireless network? (Select TWO).
A. Change the encryption method to WPA
B. Limit the DHCP scope to only have three addresses total
C. Enable the SSID broadcast
D. Enable and configure MAC filtering
E. Change the broadcast channel to a less commonly used channel
The two security measures that would BEST secure a wireless network, according to the given scenario, are:A. Change the encryption method to WPA.D. Enable and configure MAC filtering because WEP (Wired Equivalent Privacy) is the weakest encryption method of the three (WEP, WPA, WPA2) used for securing a wireless network. So, it is best to replace it with WPA (Wi-Fi Protected Access) or WPA2.
Changing the encryption method to WPA will help to prevent unauthorized connections from accessing the wireless network. The third option, enabling SSID broadcast, will not help in securing the wireless network as it will make the network visible to all devices within the range. So, this option is incorrect.
Now coming to option B, limiting the DHCP scope to three addresses total would mean that the router will only provide three IP addresses, making it difficult to add more devices to the network. This method will only create an inconvenience and will not be useful for securing the network. Therefore, this option is also incorrect.
Now coming to option D, enabling and configuring MAC filtering will prevent unauthorized devices from accessing the network by using the device's MAC address to filter out any device that does not have an authorized MAC address. This is one of the effective security measures to secure a wireless network. So, it is one of the right answers.
Finally, option E, changing the broadcast channel to a less commonly used channel, might help reduce the interference from neighboring networks, but it will not prevent unauthorized access to the network. So, this option is also incorrect.
You can learn more about WPA at: brainly.com/question/20616422
#SPJ11
how does the cybersecurity goal of preserving data integrity relate to the goal of authenticating users?
Both the purpose of authenticating users and the goal of data integrity preservation in cybersecurity are concerned with making sure that the data being accessed and used is valid.
How does cybersecurity maintain the reliability of data and systems?User-access controls, file permissions, and version controls are examples of cybersecurity techniques that aid in preventing illegal changes. Systems for cyber security are made to spot unlawful or unexpected changes to data that point to a loss of integrity.
What is the primary objective of online safety?Cybersecurity is the defence against harmful attacks by hackers, spammers, and cybercriminals against internet-connected devices and services. Companies employ the procedure to safeguard themselves against phishing scams, ransomware attacks, identity theft, data breaches, and monetary losses.
To know more about cybersecurity visit:-
https://brainly.com/question/27560386
#SPJ1
True or False: Ensuring that every value of a foreign key matches a value of the corresponding primary key is an example of a referential integrity constraint.
The given statement "Ensuring that every value of a foreign key matches a value of the corresponding primary key is an example of a referential integrity constraint." is true becasue it correctly illustrates the cocept of referential integrity.
Referential integrity is a database concept that ensures that relationships between tables remain consistent. One way to enforce referential integrity is by defining a foreign key in a child table that matches the primary key of the parent table. This ensures that every value of the foreign key in the child table matches a value of the corresponding primary key in the parent table, thereby maintaining the integrity of the relationship between the tables.
You can learn more about referential integrity at
https://brainly.com/question/22779439
#SPJ11
the percent error in a measurement is the ratio of the error in the measurement to the measurement itself, expressed as a percent. when writing a computer program, the memory remaining is determined as 2450 mb and then it is correctly found to be 2540 mb. what is the percent error in the first reading?
The percent error in the first reading is 3.54%.
Here's the answer to your question:
We have two values; the first one is the value that we measured with a possible mistake, and the second one is the true value that we should have gotten if there were no mistakes.
The error is the difference between the two values. Hence, the percent error in a measurement is the ratio of the error in the measurement to the measurement itself, expressed as a percent.
In this problem, we have 2450 MB as the memory remaining that is measured with possible errors. The true value should have been 2540 MB.
The difference between the two values is: [tex]2540 - 2450 = 90 MB[/tex]
The percent error in the first reading is:
[tex]PE = \frac{Error} {True Value} * 100[/tex]
[tex]= \frac{90}{2540} * 100PE\\=3.54%[/tex]
Thus, the percent error in the first reading is 3.54%.
Learn more about percent error here:
brainly.com/question/28771966
#SPJ11
Answer:it would be 3.5
Explanation:because you take the the error over the correct multiply 100 and that’s your number
you are purchasing a PC system that will be used as a file and print server in a small business. Which of the following hardware selection criteria is the MOST important for this system? (Select TWO).
HDMI output
RAID 1+0 array
High-end video adapter with GPU
RAID 0 array
64-bit multi-core processor
The two hardware selection criteria that are most important for a PC system that will be used as a file and print server in a small business are RAID 1+0 array and 64-bit multi-core processor. Option B and option E are correct answers.
RAID (Redundant Array of Independent Disks) 1+0, also known as RAID 10, is a type of nested RAID level that combines the high performance of RAID 0 with the redundancy of RAID 1 to provide both fault tolerance and enhanced data storage capacity. RAID 1+0 is formed by taking two identical RAID 1 (mirrored pair) arrays and combining them into a RAID 0 array. The mirrored pairs provide redundancy, whereas the RAID 0 stripes provide the necessary speed.
A 64-bit processor is a type of computer processor architecture that can handle 64-bit binary numbers. It is an upgrade from a 32-bit processor that can only handle 32-bit binary numbers. A multi-core processor is a processor that has two or more independent processing units on the same chip, each with its own cache. Multiple processing cores enable more instructions to be processed at the same time, resulting in quicker performance.
Both RAID 1+0 arra and 64-bit multi-core processors are the most important criteria for a file and print server in a small business. Thus, option B and E are the correct answers.
You can learn more about hardware selection criteria at
https://brainly.com/question/5075885
#SPJ11
Which of these is not generally a good practice for telephone use?a) Whenever possible, telephone conversations involving sensitive information are conducted in non-public areas, where they cannot be overheard.b) When discussing confidential information on the phone, the other person's identity is confirmed before proceeding with the conversation.c) Using voicemail systems and answering machines that do not require a password or PIN for access.d) Only names and callback numbers are left on voicemail or answering machines -- or with the person that takes the message -- if someone cannot be reached directly.
Using voicemail systems and answering machines that do not require a password or PIN for access is not generally a good practice for telephone use. (Option C)
What is the explanation for the above response?
Using voicemail systems and answering machines that do not require a password or PIN for access is not generally a good practice for telephone use. This can make it easy for unauthorized individuals to access confidential information left on the voicemail or answering machine.
It is important to use secure voicemail systems and answer machines that require a password or PIN for access, to protect sensitive information.
A, B, and D are generally good practices for telephone use to ensure the confidentiality and privacy of information discussed over the phone.
Learn more about telephone use at:
https://brainly.com/question/20608530
#SPJ1
Using voicemail systems and answering devices without a password or PIN is not a recommended practice for telephone use due to the security issues it presents.
Explanation:The best practice not recommended for telephone use among the options given is c) Using voicemail systems and answering machines that do not require a password or PIN for access. This practice is not secure and can potentially expose your personal or confidential information to others. Despite the convenience it gives, it is a major security concern as it neglects the aspect of privacy and authorization. Therefore, one should always use voicemail systems or answering machines that require a password or PIN for access to ensure the confidentiality of the information.
Learn more about Telephone Use Best Practices here:https://brainly.com/question/33809332
What techniques are used to develop software?
There are various techniques used to develop software, and they are described below: Waterfall, Agile, Prototype, Incremental , and Spiral Methodologies.
1. Waterfall Methodology. This is a sequential approach that requires each phase to be completed before moving on to the next one. This approach is most effective when the software requirements are clearly defined and fixed.
2. Agile Methodology. This methodology is intended to be adaptive to changing requirements, and it emphasizes collaboration among self-organizing and cross-functional teams.
3. Prototype MethodologyIn this methodology, developers create a basic version of the software in the early stages of development. This method's advantage is that it allows for better project management and effective communication between developers and clients.
4. Incremental MethodologyThis method emphasizes the release of the software in increments or small pieces. The primary advantage of this methodology is that it allows for better management of time and resources.
5. Spiral MethodologyThis method is focused on providing risk reduction and identifying the software's potential risks. The spiral approach entails repeated iterations and regular feedback to ensure that the software is functional and high-quality.
These methodologies are widely used and have proven to be effective in developing software.
Learn more about techniques used to develop software:https://brainly.com/question/4863632
#SPJ11
technologies like bar code scanners, rfid tags and touch screens are used by businesses in which information processing step?
Bar code scanners, RFID tags, and touch screens are technologies commonly used by businesses in the data input step of the information processing cycle.
These technologies allow businesses to quickly and accurately collect data from various sources and input it into their information systems.
Bar code scanners and RFID tags are used to input data automatically from products, inventory, or assets, reducing the time and errors associated with manual data entry. Touch screens, on the other hand, are used as an interface for manual data input by allowing users to interact directly with the system through a touch-based interface.
By using these technologies in the data input step, businesses can improve the accuracy, speed, and efficiency of their information processing, leading to more informed decision-making and better overall performance.
To know more about Bar code click here:
brainly.com/question/30617824
#SPJ4
Lakeisha is developing a program to process data from smart sensors installed in factories. The thousands of sensors produce millions of data points each day. When she ran her program on her computer, it took 10 hours to complete. Which of these strategies are most likely to speed up her data processing?
There are several strategies that Lakeisha could use to speed up her data processing, such as parallel processing, data compression, and data aggregation.
The strategy to speed data processingThese strategies can be used to reduce the amount of data that needs to be processed, speed up the processing of each individual data point, and allow multiple data points to be processed simultaneously.
Additionally, she could use a more powerful computer or use cloud-based computing to speed up her program.Lakeisha is developing a program to process data from smart sensors installed in factories.
The thousands of sensors produce millions of data points each day. When she ran her program on her computer, it took 10 hours to complete.
Learn more about data processing at
https://brainly.com/question/30094947
#SPJ11
1. ReType the Following Javascript Code. * //My name is onEvent("bigButton", "click", function(){ setProperty("bigButton", "background-color", "red"); console.log("You clicked the reset button"); setScreen("screenMain"); playSound ("sound://category_animals/cat.mp3")
2. Describe what the following code does?
Answer:
Well.
The following code will create a button that is clickable and will be in the color red however i dont see any font size or type....
I'm used to more of a code along the lines of .....
//
<button id="run" class="ms-Button">
<span class="ms-Button-label">Run</span>
</button>
