What is the mass percent of a sodium fluoride solution prepared by dissolving 0.64 moles of sodium fluoride into 63.5 grams of water?
Answers
The mass percent of a sodium fluoride solution prepared by dissolving 0.64 moles of sodium fluoride into 63.5 grams of water is 29.7%.
What is mass percent ?Mass percent is a means to describe a component in a specific combination or to convey a concentration. The mass percentage used to describe the solution composition indicates the mass of solute contained in a given mass of solution.
To determine the mass percent of an element in a compound, we divide the mass of the element in one mole of the compound by the compound's molar mass and multiply the result by 100.
Given:
Number of moles = 0.64 moles
Moles of sodium fluoride = Given mass/molar mass
0.64 moles = Mass / 42
Mass = 26.88gram
Mass % = Mass of solute/ mass of solution × 100
= 26.88/90.48 × 100
= 29.7 %
Thus, 29.7 % is the mass percent of a sodium fluoride solution prepared by dissolving 0.64 moles of sodium fluoride into 63.5 grams of water
To learn more about the mass percent, follow the link;
https://brainly.com/question/5394922
#SPJ6
Related Questions
Sodium and chlorine combine to form table salt.
2Na(s) + Cl2(g) → 2NaCl(s)
Does this reaction obey the law of conservation of mass?
Answers
Answer:
yes it does
Explanation:
because the ratios on the reactants and products are equal
The reaction 2Na(s) + Cl₂(g) → 2NaCl(s) obeys the law of conservation of mass.
Yes, this reaction obeys the law of conservation of mass. The law of conservation of mass states that mass is neither created nor destroyed in a chemical reaction; it is only rearranged.
In the given reaction, we have 2 sodium atoms (Na) on the left side and 2 sodium atoms (Na) on the right side. Similarly, we have 2 chlorine molecules (Cl₂) on the left side and 2 chlorine atoms (Cl) on the right side. Therefore, the number of atoms of each element is balanced on both sides of the reaction.
Additionally, the total mass of the reactants (2Na + Cl₂) is equal to the total mass of the product (2NaCl). The coefficients in the balanced equation represent the stoichiometric ratios, ensuring that the mass is conserved.
Hence, the reaction 2Na(s) + Cl₂(g) → 2NaCl(s) obeys the law of conservation of mass.
Learn more about law of conservation of mass from the link given below.
https://brainly.com/question/28711001
#SPJ2
HELP ME PLZ Which of the following describes the structure of a fish's swim bladder?
A. Expands and contracts to allow the fish to rise or sink in the water
B. Internal organ filled with liquid
c. Holds urine until it can be released into the environment
D. Internal organ filled with air sacs
Answers
Skip Ad
Teleost fish in cross section.
See all media
Related Topics: Baroreception
The Editors of Encyclopaedia Britannica
This article was most recently revised and updated by Adam Augustyn, Managing Editor, Reference Content.
Learn More in these related Britannica articles:
auditory mechanisms in insects
sound reception: Special stimulation mechanisms
…however, the connections with the swim bladder disappear, leaving the air sacs connected with the saccular...…
human circulatory system
circulatory system: Circulation in jawed vertebrates
…structure in fishes called the swim bladder, a sac that grows out from the anterior part of the gut....…
vertebrate: skeleton
skeleton: Buoyancy devices
…or forward, end of the swim bladder to the auditory organs of the head. Sound vibrations cause changes...…
newsletter icon
HISTORY AT YOUR FINGERTIPS
Sign up here to see what happened On This Day, every day in your inbox!
Email address
By signing up, you agree to our Privacy Notice.
BLADDER
Sections & Media
Home
Health & Medicine
Anatomy & Physiology
Bladder
anatomy
Cite
Share
More
BY The Editors of Encyclopaedia Britannica View Edit History
FULL ARTICLE
Bladder, membranous sac in animals that serves as the receptacle of a fluid or gas. See gallbladder; swim bladder; urinary bladder.
Related Topics: Bladder cancer Urinary bladder Swim bladder Ureter
Learn More in these related Britannica articles:
gallbladder; bile ducts
gallbladder
Gallbladder, a muscular membranous sac that stores and concentrates bile, a fluid that...…
Teleost fish in cross section.
swim bladder
Swim bladder, buoyancy organ possessed by most bony fish. The swim bladder is located...…
male urinary bladder and urethra
urinary bladder
Urinary bladder, in most vertebrates, except birds, organ for the temporary storage of...…
newsletter icon
HISTORY AT YOUR FINGERTIPS
Sign up here to see what happened On This Day, every day in your inbox!
Email address
By signing up, you agree to our Privacy Notice.
Which pair of substances would react the
fastest?
a. Copper sheet and concentrated
nitric acid.
b. Copper powder and dilute nitric acid
C. Copper powder and concentrated
nitric acid.
Answers
Answer:
C. It has the highest rate of reaction. Copper has the highest TSA/V and concentrated nitric acid has huggest num of solute
movement of water molecules without the use of energy
Answers
The answer is ‘Passive Transport’
movement of molecules without the use of energy is due to the shrinkage of water
What is the name of the molecule shown below?
A) ethanol
B) ethanal
C) ethanoic acid
D) ethylamine
Answers
The name of the molecule shown is Ethanol.
What is Ethanol?Ethanol is a alcoholic substance that is formed from fermentation of glucose in the presence of yeast or microorganisms.
It has a chemical group that have methyl group, hydroxyl group OH which is bonded to carbon atom.
Therefore, The name of the molecule shown is Ethanol.
Learn more about ethanol below.
https://brainly.com/question/13423304
#SPJ2
write molecular formula
1)aurric cloride
2)aluminium hydroxide
3)potassium thiosulphate
4)magnesium bicarbonate
5)magnesium sulphate
6)sodium oxide
7)cuprous oxide
8)mercuric oxide
9)calcium nitrate
10)aluminium oxide
11)ferric chloride
12)ammoium oxide
13)silver chloride
14)hydrogen bromide
15)magnesium nitride
16)hydrogen peroxide
17)sodium sulphate
18)ammonium sulphate
19)ferrous sulphate
20)sodium carbonate
21)zinc carbonate
22)calcium silicate
23)zinc carbonate
24)potassium clorate
25)aluminium hydroxide
26)ammonium hydroxide
27)sodium silicate
Answers
Okay.
Here's your below answers.
1) AuCl3.
2) Al(OH)3.
3) K2S2O3.
4) Mg(HCO3)2.
5) MgSO4.
6) Na2O.
7) CuO.
8) HgO.
9) Ca(NO3)2.
10) Al2O3.
11) FeCl2.
12) (NH4)2O.
13) AgCl.
14) HBr.
15) Mg3N2.
16) H2O2.
17) Na2SO4.
18) (NH4)2SO4.
19) FeSO4.
20) Na2CO3.
21) ZnCO3.
22) CaSiO3.
23) ZnCO3.
24) KClO3.
25) Al(OH)3.
26) NH4OH.
27) Na2SiO3.
when carbon is heated in a limited supply of oxygen, a gas is obtained.
1 .what is the name of this gas
Answers
Answer:
carbon monoxide
I think its correct but I am not sure
Answer: when carbon is heated in air carbon dioxide is formed, so is incomplete combustion which results in carbon monoxide.
Explanation: but when carbon dioxide reacts with more oxygen carbon monoxide is formed i guess.
I AM A BIT SURE BUT HOPE THIS HELPSSSS!!!!
If an atom contains more
electrons than protons, it is
Answers
Answer:
If an atom has the same number of electrons as protons, it is a neutral atom.
Explanation:
Is the graph more accurate with more atoms or less atoms?
Answers
Answer:
I would guess more atoms? but there is no graph attached
______ exhibits the highest
intermolecular forces of the states of matter.
A. Solid
B. Liquid
C. Gas
D. Vacuum

Answers
plz answer (g) i will give rating 5 and thanks who answer plz fast
Answers
Answer:
Like many common group 2 metal carbonates, magnesium carbonate reacts with aqueous acids to release carbon dioxide and water
MgCO3 + 2 HCl → MgCl2 + CO2 + H2O.
The procedure to obtain pure magnesium chloride from the reaction is as thus
Step 1: Reaction
- Leave the dilute hydrochloric acid in a beaker.
- Add Magnesium carbonate slowly until it is in excess or until no more gas seem to be getting liberated.
Step 2: Filtration
- Filter with filter paper and funnel.
- Filter off the excess magnesium carbonate as magnesium chloride will be in aqueous form (liquid) and will come out with the filtrate. The residue is the excess magnesium carbonate.
Step 3: Crystallization to obtain solid crystals from the filtrate.
- Pour filtrate solution into evaporating dish/basin
- Provide heat using Bunsen burner
- Pour solution into an evaporating basin and heat over a water bath
- Stop heating when crystals start to form
allow water to evaporate until pure crystals remain.
- Dry crystals using absorbent paper or warm oven.
Precautions
- Use personal protective equipment such as gloves, a lab coat and wear eye protection, especially when heating.
- Avoid inhaling unnecessary gases during the whole process.
. The Ksp of barium sulfate is 1.1 × 10–10. What is the sulfate-ion concentration of a 1.0-L saturated solution of BaSO4 to which 0.025 mol of Ba(NO3)2 is added? 4.4 × 10–9M 1.0 × 10–5M 6.6 × 10–5M 2.8 × 10–12M
Answers
Answer:
[tex][SO_4^{2-}]=4.4*10^{-9}M[/tex]
Explanation:
From the question we are told that:
[tex]Ksp=1.1*10^{-10}[/tex]
Volume of [tex]SO_4^{2-}=1.O[/tex]
Moles of [tex]Ba(NO_3)^2 =0.025[/tex]
Generally the equation for Ksp is mathematically given by
[tex]Ksp=[Ba^{2+}][SO_4^{2-}][/tex]
[tex]1.1*10^{-10}=[0.025][SO_4^{2-}][/tex]
Therefore
[tex][SO_4^{2-}]=4.4*10^{-9}M[/tex]
Calculate the volume (in L) that 3.25 mol of helium gas will occupy at a temperature of 25.0 °C and a pressure of 799 mm Hg.
Answers
Answer:
V = 6.34 L
Explanation:
Given that,
Number of moles of Helium gas, n = 3.25 mol
Temperature, T = 25 °C = 298 K
Pressure, P = 799 mm Hg
We know that,
PV = nRT
Where
R is the gas constant, R = 62.4 L-mm Hg/mol K
So,
[tex]V=\dfrac{nRT}{P}\\\\V=\dfrac{3.25\times 62.4\times 25}{799}\\\\V=6.34\ L[/tex]
So, the volume of the gas is 6.34 L.
Which is a mixture?
Sodium metal
chlonne gas
sodium metal and chlonne gas
sodium chlonde (salt) and water
Answers
Answer:
I believe it's salt and water
Explanation:
not sure
Answer:
Mixture is a electronic device used to peel the things such as onion ,tomato,ginger, garlic etc.
what is the molarity of HCL solution that has a density of 1.17g/ml at 25°?
Answers
Here, we have been given that;
$ \bf{1 ml}$ = 1.17 g$ \bf{1 l}$ = 1170 gHence, we can note that,
No. of moles of HCL (n) = $ \sf{\frac{1170}{36.5}}$(n) = 32.05
[tex] \\ [/tex]
Thus,
Molarity = 32.05 mg/LHence, molarity of the given solution will be 32.05 mg/L.
La masa de una olla es de 300g y contiene 90% de aluminio. Hallar el número de moles de aluminio de la olla. P.A.(Al= 27)
Answers
Explanation:
The mass of a pot is 300g and contains 90% aluminum. Find the number of moles of aluminum in the pot. P.A. (Al = 27)
The mass of aluminum present in the pot is:
[tex]300 g * 90/100\\=270 g[/tex]
Hence, in the given pot 270g Al is present.
[tex]Number of moles of Al=\frac{given mass ofAl}{its molar mass}[/tex]
The gram atomic mass of Al -27 g/mol
Given the mass of Al is 270 g
Substitute these values in the above formula:
[tex]Number of moles of Al=\frac{given mass ofAl}{its molar mass}\\=\frac{270 g}{27 g} \\=10.0 mol[/tex]
Answer is 10.0 mol of Al is present.
To begin the experiment, Xavier washed his hands and put on safety goggles. He then measured 120 milliliters of tap water, 2.5 milliliters of baking soda, and 2.5 milliliters of citric acid. The initial temperature of the water was 23.5°C.
Next Xavier added the baking soda and citric acid to the water. The mixture immediately began to bubble vigorously, which lasted for about 30 seconds. The new temperature of the mixture was 17.7°C.
Is a chemical reaction taking place during Xavier’s experiment? How do you know?
WILL GIVE BRAINLIEST!!!!!!!!!!!!!!!
Answers
Answer:
Yes a chemical reaction is taking place.
Explanation:
There is a change in temperature along with bubbling. All signs of a chemical reaction.
Below is a picture of two blocks made of different materials. Block A Block B grams grams If Block A is located on the Moon and Block B is located on Earth, which of the following is true about the two blocks?
a: they have the same density.
b: they have the same volume.
c: they have the same mass.
d: they have the same weight.
Answers
Answer:
A
Explanation:
this is because density is the mass per unit volume of an object
If Block A is located on the Moon and Block B is located on Earth, then the truth about the two blocks will be they have the same mass, and they have the same density. The correct option is a and c.
What is mass?Mass is a physical body's total amount of matter. By multiplying the object's volume and density, it can be determined.
Density, volume, mass, and weight are the four entities that are supplied. The volume and weight of the object on the moon will alter as a result of these entities. They will be different in the universe if he goes to Earth.
The location and gravitational field of an object do not affect its density or mass.
Thus, the correct options are a: they have the same density, and c. they have the same mass.
To learn more about mass, refer to the link:
https://brainly.com/question/20195594
#SPJ2
What happens if kinetic energy of a gas is lowered
Answers
Answer:
"If you lower the kinetic energy of a gas its temperature will decrease because temperature is a measure of the average kinetic energy of a substance."
Explanation:
Explanation: because temperature is a measure of the average kinetic energy and its substance
CORRECT ANSWER ONLY ND WILL GIVE BRAINLIEST✌
Calculate the mass of nitrogen dioxide gas that would occupy
the same volume as 10g of hydrogen gas at ē same pressure and temperature
(H= 1.0 N = 14.0 O= 16.0) GAS LAWS/MOLES
Answers
Answer:
150g
Explanation:
Assuming they are ideal gases at the same temperature and pressure, equal moles of gasses have equal volume. IN this case, if we have 10g of hydrogen gas, that is 5 moles of H2 gas. That means 5 moles og NO2 will occupy the same volume which is 5*(14.0 + 16.0*2) = 230 g
help please i am confused
It is pholem or phloem
Answers
Answer:
phloem I believe
Explanation:
dictionary
Which one is wrong I did them but it’s saying I got partial credit
Answers
Based on the Lewis/electron dot representation
of the two atoms, predict the ratio of metal
cationic (+) atom to nonmetal anionic (-) atom in
the compound.
.Ca.
.P.
A. 1:1
B. 3:2
C. 2:1
D. 3:1
Can someone plz tell me how to do this.
Answers
Answer:
B or C think so
For a reaction: aA → Products, [A]o -4.3 M, and the first two half-lives are 56 and 28 minutes, respectively. Calculate k (without units). Show Work!
A. 7.7 x 10^-2
B. 4.2 x 10^-3
C. 3.8 x 10^-2
D. 8.3 x 10^-3
E. None of these
Answers
Answer:
C.[tex]3.8\times 10^{-2}[/tex]
Explanation:
We are given that
Initial concentration, [tex][A]_o=4.3 M[/tex]
First half life, [tex]t_{\frac{1}{2}}=56[/tex]minutes
Second half life, [tex]t'_{\frac{1}{2}}=28[/tex]minutes
We have to find K.
The given reaction is zero order reaction.
We know that for zero order reaction
[tex]t_{\frac{1}{2}}=\frac{[A]_o}{2k}[/tex]
Using the formula
[tex]56=\frac{4.3}{2k}[/tex]
[tex]k=\frac{4.3}{2\times 56}[/tex]
[tex]k=3.8\times 10^{-2}[/tex]
Hence, option C is correct.
Zero-order reactions are the reactions when a surface or a catalyst is required for the reaction to proceed and is saturated by the reactant chemicals. The result of the concentration versus the time plot will be a straight line in a zero-order reaction.
[tex]3.8 \times 10 ^{-2}[/tex] is the value of k.
How to calculate the value of k?Given,
Initial concentration [tex][A_{0}][/tex] = 4.3 MThe first half-life of the reactant [tex](t \dfrac{1}{2})[/tex] = 56 minutesThe second half-life of the reactant [tex](t \dfrac{1}{2})[/tex] = 28 minutesThe given reaction in the question is of zero-order and for that, we know that,
[tex]t \dfrac{1}{2} = \dfrac{[A_{0}] }{2\;\rm k}[/tex]
Substituting the values in the equation we get:
[tex]\begin{aligned}56 &= \dfrac{4.3 }{2\; \rm k}\\\\\rm k &= {4.3 }{2 \times 56}\\\\\rm k &= 3.8 \times 10^{ -2}\end{aligned}[/tex]
Therefore, option C is correct.
Learn more about the zero-order reaction here:
https://brainly.com/question/4638382
which best describes the relationship between internal energy and thermal energy
Answers
Answer:
answer is d on edge
Explanation:
Over a period of 2 minutes, 180 coulombs of charge pass through a resistor. What is the current through the resistor during this time?
Type the correct answer in the box. Use numerals instead of words.
The current through the resistor during this time is
A.
Answers
Answer:
Explanation:
Formula
The current = charge / time
The charge is in coulombs
The time has to be in seconds.
1 minute = 60 seconds
2 minutes = 120 seconds.
charge = 180 coulombs
current = 180 / 120
current = 1.5 amperes.
CH3 CH2 CH2 OH + H2SO4
Get the product and answer the following questions :
I. A + HCl
II. A --> Combustion ( what product does it form. Write out the equation )
III.A ---> Hydrogenation (what product does it form. Write out the equation )
Note : A represents the product gotten from the reaction between
CH3 CH2 CH2 OH and H2SO4
Answers
Answer:
propene and hydrogen is product
When propanol is heated with concentrated sulphuric acid at 443 K, dehydration takes place and prop-1-ene is formed. In this reaction concentrated sulphuric acid acts as a dehydrating agent.
I. A + HCl gives )-gives 2-chloropropane
II. A --> Combustion ( what product does it form. Write out the equation propene ozonide
III.A ---> Hydrogenation (what product does it form. Write out the equation )propanol
What is a chemical reaction?
Answers
Answer:
A chemical reaction is a process in which one or more substances, also called reactants, are converted to one or more different substances, known as products. ... A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.Explanation:
hyy can you my friend lol ,, ☺️What is the percent yield of a reaction?
O A. The difference between measured and calculated amounts
OB.
The amount of produd obtained
amount possible
* 100
C. The amount of product actually obtained in a reaction
D. The amount of product that is possible from a reaction
Answers
Answer:
B. The amount of produd obtained/amount possible * 100
Explanation:
In chemistry, the yield of a chemical reaction is the quantity or amount of products obtained in that chemical reaction. It is calculated by using the following formula:
Percentage yield = Actual yield/theoretical yield × 100
- The actual yield is the amount of products got from a chemical reaction
- The theoretical yield is the amount of product got from using the balanced equation (stoichiometry).
How many Hydrogen (H) Atoms are in Methylene?
Answers
Answer:
FOUR HYDROGEN ATOMS
Explanation:
Two C atoms, four H atoms, and two O atoms can also be arranged to form a methyl formate, which is used in manufacturing, as an insecticide, and for quick-drying finishes. Methyl formate molecules have one of the oxygen atoms between the two carbon atoms, differing from the arrangement in acetic acid molecules.
The Methylene group has 2 hydrogen. -CH2
