Answer:
i believe its 5.2
Explanation:
PLEASE HELP!! ILL MARK BRAINLIST!!
How do I balance "Lithium hydroxide + hydrogen acetate --> lithium acetate + water"
Answer:
LiOH+CH3COOH=C2H3LiO2+H2O balanced equation
Explanation:
lithium hydroxide-> LiOH
hydrogen acetate->CH3COOH
lithium acetate->C2H3LiO2
water->H2O
LiOH+CH3COOH=C2H3LiO2+H2O
Li=1,O=3,H=5,C=2 --> Li=1,O=3,H=5,C=2
the two sides have same numbers so it is balanced.
Consider the double replacement reaction given below: HgNO3(aq) + KBr(aq) → HgBr (??) + KNO3(??)The state of matter for HgBr would be
Answer: The state of maater for HgBr is solid.
Explanation:
A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.
A double displacement reaction in which one of the product is formed as a solid is called as precipitation reaction.
The balanced chemical equation is:
[tex]HgNO_3(aq)+KBr(aq)\rightarrow HgBr(s)+KNO_3(aq)[/tex]
How many gallons of water would be in a container that is 256 millimeters X 20 inches X.045 meter.
3. All the deer in Horry County represent which of the following?
species
biome
population
community
Answer:
community
Explanation:
Answer:
The correct answer is population. I took the test and got it right.
Which formula is an empirical formula?
A.CH4
B.C2H6
C.C3H6
D.C4H10
Answer:
CH4
Explanation:
Marble chips react with dilute hydrochloric acid to produce carbon dioxide gas. The rate of this reaction can be changed by changing the size of marble chips.
Describe experiments to investigate what effect using smaller marble chips has on the rate of this reaction.
Answer:
See explanation
Explanation:
We know that surface area is an important determinant factor in the study of reaction rate. This is the reason why finely divided marble chips react faster than lumps of marble in the reaction between marble chips and dilute HCl.
Now imagine that i have a lump of marble and i have finely divided marble. Then i also have a solution of 0.5 M dilute HCl. If i introduce 1g of the lump of marble into 250 ml solution of the 0.5 M HCl in one beaker and introduce 1g of finely divided marble into another 250 ml solution of 0.5 M HCl in a separate beaker, we will notice that the finely divided marble chips reacts faster as evidenced by the quicker effervescence of CO2 gas from the later compared to the former.
Hence, smaller marble chips reacts faster with dilute HCl than a lump of marble.
Answer:
yes the above given answer is absolutely correct I agree with u man on the above.
How does adaption allow mice with the mutation to survive better in some areas
Answer: Mutations can cause instant adaptations, while natural selection is the process by which adaptations occurs over a series of generations. Adaptations are changes or processes of changes by which an organism or species becomes better suited for its environment. A mutation is an alteration of the DNA sequence.
What is the volume of 4.78g of O2 gas at STP?
Answer:
Explanation:
The trick here is to realize that if you know the volume of a gas at STP, you can use the fact that
1
mole of any ideal gas occupies
22.7 L
under STP conditions to calculate how many moles of gas you have in your sample.
Under STP conditions:
1 mole of an ideal gas = 22.7 L
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
In your case, you know that your sample of gas occupies
2.28 L
under STP conditions, which are currently defined as a pressure of
100 kPa
and a temperature of
0
∘
C
.
This means that your sample will contain
2.28
L
⋅
molar volume of a gas at STP
1 mole gas
22.7
L
=
0.10044 moles gas
Now, the molar mass of the gas is the mass of exactly
1
mole of the gas. In your case, you know that you get
3.78 g
for every
0.10044
moles, which means that you have
1
mole
⋅
3.78 g
0.10044
moles
=
37.6 g
Since this is the mass of
1
mole of gas, you can say that the molar mass of the gas is
molar mass = 37.6 g mol
−
1
−−−−−−−−−−−−−−−−−−−−−−−
If I have one mole of sulfur, how many grams would it weigh?
Answer:
32.06 grams
Explanation:
One mole of sulfur is equal to 32.06 grams of sulfur.
Answer:ok
Explanatio
heres the answer 32.065 grams because 1 mole is equal to 1 moles Sulfur
10
If velocity is positive, which would most likely yield a negative acceleration?
O O OO
A final velocity that is faster than an initial velocity.
A time that is less than a half hour.
An initial velocity that is faster than a final velocity.
A time that is greater than a half hour.
Answer:
An initial velocity that is faster than a final velocity
Explanation:
The relationship between velocity and acceleration is given as follow;
Acceleration = Change in velocity / Time
Change in Velocity = Final Velocity - Initial Velocity
From the formular, time is not able to affect the sign of the acceleration.
A negative acceleration is also referred to as deceleration and this occurs when there is a drop in velocity.
A drop in velocity occurs when the initial velocity is faster than the final velocity.
What will be the mass of 9.95 liters of propane gas (C3H8) at STP?
Answer:
19.5g
Explanation:
Given parameters:
Volume of propane gas = 9.95L
Unknown:
Mass of propane gas = ?
Solution:
To solve this problem, find the number of moles first.
At STP;
22.4L of gas makes up 1 mole
9.95L of gas will have a [tex]\frac{9.95}{22.4}[/tex] = 0.44mole
So;
Mass of propane gas = number of moles x molar mass
Molar mass of propane = 3(12) + 8(1) = 44g/mol
Mass = 0.44 x 44 = 19.5g
10. There are two bears that both have the same proteins for ear shape in their cells. The bears have
different parents. What can you say about the bears' ear shape?
Answer:
They will have the same ear shape since their proteins connect in the same ways to determine ear shape.
Explanation:
I majored in Chemistry
Answer:
They will have the same ear shape since their proteins connect in the same ways to determine ear shape.
Explanation:
1. Which of these is NOT found in the nucleus of an atom?
neutrons
protons
electrons
the mass of the atom
Answer:
Electrons
Explanation:
Answer:
Electrons are not found in the nucleus for they are orbiting the atom.
Why do we sometimes use roman numerals in naming ionic compounds?
We use roman numerals to indicate the oxidation state of metal atoms when naming compounds especially in the case of coordination compounds. It is a standard system of nomenclature.
What is oxidation state?Oxidation state of a species is the number electrons gained or lost. Oxidation state increases if electrons are lost from the atom and it will be decreased if electrons are gained.
For example, copper is in + 2 oxidation state in CuSO₄, thus it can be indicated as Cu(II). Copper can exists is +3 oxidation too. Thus the representation will be Cu (III).
All the transition metals like copper exhibit various oxidation state. So it is important to indicate in which oxidation state they are in a particular compound. In the compound Fe₂O₃, iron is in + oxidation state whereas in FeSO₄, it can be +2 . Thus it is important to note whether it is Fe (II) or Fe (III).
To find more about oxidation states, refer the link below:
https://brainly.com/question/11313964
#SPJ2
A. Neutrons and electrons
B. Protons and electrons
C. Electrons in energy levels
D. Protons and neutrons
Answer:
D.
Explanation:
Because protons and neutrons make up the mass of an atom.
PLEASE HELP!! WILL MARK BRAINLIEST
Use the Internet to list five examples of elements with their properties and five examples of compounds with their properties.
Answer:
here you go
Explanation:
5 elements and properties:
Boron- The chemical properties of boron are more similar to carbon and silicon than elements of its own group, although boron is more electron deficient. Boron has a high affinity for oxygen-forming borates, and reacts with water at temperatures above 100 °C to form boric acid and other boron compounds.
Carbon- As a member of group 14 on the periodic table, it is nonmetallic and tetravalent—making four electrons available to form covalent chemical bonds. The most common isotope of carbon has 6 protons and 6 neutrons, and has an atomic mass of 12.0107 amu. Its ground state electron configuration is 1s22s22p2.
Nitrogen- Nitrogen gas (chemical symbol N) is generally inert, nonmetallic, colorless, odorless and tasteless. Its atomic number is 7, and it has an atomic weight of 14.0067. Nitrogen has a density of 1.251 grams/liter at 0 C and a specific gravity of 0.96737, making it slightly lighter than air.
Oxygen- is the air you breath
Nickel- Nickel is a hard silver white metal, which forms cubic crystals. It is malleable, ductile, and has superior strength and corrosion resistance. The metal is a fair conductor of heat and electricity and exhibits magnetic properties below 345°C
5 compounds and properties:
Water - Formula: H2O = Hydrogen2 + Oxygen. ...
Hydrogen Peroxide - Formula: H2O2 = Hydrogen2 + Oxygen2 ...
Salt - Formula: NaCl = Sodium + Chlorine. ...
Baking Soda - Formula: NaHCO3 = Sodium + Hydrogen + Carbon + Oxygen3
Octane - Formula: C8H18 = Carbon8 + Hydrogen18
hope this helps
The nucleus of a fluorine atom has a charge of?
A. +19
B. 0
C. +9
D. +1
Answer: B
Explanation: A fluorine atom has nine protons and nine electrons, so it is electrically neutral. (neutral =0)
The nucleus of a fluorine atom has a charge of zero as the atom has equal number of positive and negative charges.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/29695801
#SPJ6
What particles are contained in the nucleus of an atom?
O electrons & protons
O neutrons & electrons
O neutrons & protons
O pixels & electrons
Base changes phenolphthalein to pink it is true or false
Answer:
It’s false
Explanation:
it could be true if the question mentioned alkaline solution
Answer:
True
Explanation:
Phenolphthalein is colorless in the presence of an acid and turns pink in the presence of a base.
36.0 g of Be contains how many moles?
Answer:
Explanation:
4
What is the charge of an electron?
A-negative
B-neutral
C-positive
D-none of these
PLZ HELP ME IM FAILING!
Everything you need to know about the question is on the photo
Answer:
C. NH₄Cl
Explanation:
The compound with the element ratio 1 : 4 : 1 from the given choices is NH₄Cl.
An element is a pure substance made up of distinct number of atoms. Elements are unique and are different from other elements because of the nature of their atoms.
We often delineate an element using chemical symbols.
In the compound NH₄Cl;
There are 3 elements:
Number of atoms
N 1
H 4
Cl 1
Why would it be harder to jump on the planet Jupiter than on Earth?
HELP PLSSS
6.900x10^10 ÷ 4.000x10^8
Answer:
1.725e+18
Explanation:
Which statement best describes the relationship between photosynthesis and cellular respiration?
Photosynthesis removes carbon from the atmosphere, and cellular respiration releases carbon back into the atmosphere.
Photosynthesis is part of the carbon cycle, and cellular respiration is not.
Only plants perform photosynthesis, and only animals perform cellular respiration.
Photosynthesis releases carbon into the atmosphere, and cellular respiration removes carbon from the atmosphere.
Answer:
Photosynthesis removes carbon from the atmosphere, and cellular respiration releases carbon back into the atmosphere.
Explanation:
The first option clearly expresses the relationship between photosynthesis and cellular respiration.
Cellular respiration releases carbon back into the atmosphere whereas photosynthesis removes the carbon from the atmosphere.
Photosynthesis is the process whereby green plants manufacture their food using carbon dioxide and water.
In cellular respiration, the product of the photosynthesis is used by organisms to produce energy.
How many grams are in 25.0 moles of carbon tetrachloride (CCI)?
Answer:
3.84 kg
Explanation:
CCl4 molar mass: 153.82 g/mol
n = mass / molar mass
25 moles = mass / 153.82 g/mol
mass = 25 x 153.82
mass = 3845 g or 3,84 kg
How many molecules are in 2.91 X 1022 atoms of He
Answer:
Explanation:
1 mole of oranges contains 6.02 x1023 oranges. 1 mole of helium gas contains 6.02 x1023 helium atoms. 1 mole of water contains 6.02 x1023 water molecules.
...
Answer:
25194.56
Explanation:
You'll need a scientifuc calculator
2.91*10^22*1 = 2.91E22
2.91E22-/6.02*10^23=25194.56
6.02*10^22 Is the Mole number
Identify the reaction type shown and describe the clues that were used to identify it.
NH4NO3 → N2O + 2H2O
Answer:
This chemical equation represents a decomposition reaction. This identification is based on the fact that the single reactant chemical compound breaks down into two different chemical substances that are different from the initial chemical substance.
Explanation:
it was the sample response lol
A reactant is broken down into two or more products in the decomposition reaction. The given reaction is a decomposition reaction.
Decomposition reaction:
In this type of chemical reaction, a reactant is broken down into two or more products.
For example- Ammonium nitrate is broken down into nitrous oxide and water molecules.
[tex]\bold {NH_4NO_3 \rightarrow N_2O + 2H_2O}[/tex]
Therefore, the given reaction is a decomposition reaction.
To know more about Decomposition reaction:
https://brainly.com/question/24936069
You need to make an aqueous solution of 0.150 M sodium fluoride for an experiment in lab, using a 500 mL volumetric flask. How much solid sodium fluoride should you add?
Answer:
Explanation:
Solution required is .15 M 500 mL sodium fluoride .
molecular weight of sodium fluoride = 42
one mole of sodium fluoride = 42 grams
No of moles contained in the solution of .15M , 500 mL solution
= .15 x 0.5 moles = .075 moles
1 mole = 42 g
.075 moles = .075 x 42 = 3.15 grams .
So mass of sodium fluoride required = 3.15 g .
