Answers
Answer:
10
Explanation:
The identity of an element refers to the specific element that is being referred to. The identity of the element is phosphorus (P).
To determine the identity of the element based on the given idealized PES (Photoelectron Spectroscopy) spectrum, we need to examine the pattern of relative number of electrons vs. energy levels.
The PES spectrum shows the relative number of electrons at different energy levels, and it is usually plotted with the relative number of electrons on the y-axis and the energy levels on the x-axis.
From the given data, we can see that there are three peaks with the following approximate values:
Energy (MJ/mol): ~1000, Relative number of electrons: ~1000
Energy (MJ/mol): ~100, Relative number of electrons: ~100
Energy (MJ/mol): ~10, Relative number of electrons: ~10
Based on this information, we can infer that the element has three distinct electron energy levels or subshells with approximately 1000, 100, and 10 electrons each.
To identify the element, we need to consider the electron configuration of elements in the periodic table and find an element that has three energy levels or subshells with roughly the same number of electrons.
The element that matches this pattern is phosphorus (P), which has the electron configuration: 1s² 2s² 2p⁶ 3s² 3p³. This configuration has 2 electrons in the 1st energy level (1s²), 8 electrons in the 2nd energy level (2s² 2p⁶), and 5 electrons in the 3rd energy level (3s² 3p³). The numbers are not exact matches, but they are relatively close to the given values in the PES spectrum.
To know more about element here
https://brainly.com/question/20096027
#SPJ2
Related Questions
Which of the following examples shows an increase of energy in the particles of matter? (Select THREE that are true)
liquid to solid
liquid to gas
gas to liquid
OOO
solid to liquid
solid to gas
Answers
What is a mixture? How will you separate the components of a mixture containing sugar, sand and water?
Answers
Answer:
Mixture is combination of two or more substances
Explanation:
The sugar would dissolve in water. You could then pour off the solution and wash the remaining sand with a bit more water. Heat the water to evaporate it from the sugar, and the two are separated.
How many elements have properties of both metals and non-metals?
Answers
Answer:
The elements boron, silicon, germanium, arsenic, antimony, and tellurium separate the metals from the nonmetals in the periodic table. These elements, called metalloids or sometimes semimetals, exhibit properties characteristic of both metals and nonmetals.
Elements: Oxygen
HELP PLEASE WILL MARK BRAINLIEST!!!!!!!
Answers
Answer:
Precise
Explanation:
hope it helps!!!!!!!!
11) Calcium Chloride, CaCl2, can be used instead of road salt to melt the ice on roads during the winter. To determine how much calcium chloride had been used on a nearby road, a student took a sample of slush to analyze. The sample had a mass of 23.47g. When the solution was evaporated, the residue had a mass of 4.58g (assume that no other solutes were present).
a) What was the mass/mass percent of calcium chloride in the slush
b) How many grams of calcium chloride were present in 100g solution?
Answers
Answer:
What is that? I do not understand
Which of the following statements is incorrect for the reaction of 1,3- butadiene with a substituted alkene CH2=CHX when X is a nitro group?
Answers
Answer:
hugsvsbsbbsnjsjsnsbsbbzbd
A sealed reaction vessel initially contains 1.113×10-2 moles of water vapor and 1.490×10-2 moles of CO(g).
H20(g) +CO(g) <==> H2(g) + CO2(g)
After the above reaction has come to equilibrium, the vessel contains 8.326×10-3 moles of CO2(g).
What is the value of the equilibrium constant Kc of the reaction at the temperature of the vessel?
Answers
Answer:
Kc =[tex]\frac{[8.326x10-3]^{1} }{[1.113x10-2]^{1}[1.490x10-2]^{1} }[/tex]
Kc = 50.2059
Explanation:
1. Balance the equation
2. Use the Kc formula
Remember that pure substances, like H2 are not included on the Kc formula
The value of the equilibrium constant Kc of the reaction at the temperature of the vessel is 0.05.
Calculation,
The balanced chemical equation is given as,
[tex]2H_{2}O[/tex] + [tex]2CO[/tex] → [tex]2H_{2}[/tex] + [tex]2CO_{2}[/tex]
At t=0 1.113×[tex]10^{-2}[/tex] 1.490×[tex]10^{-2}[/tex] 0
At [tex]t=t_{eq}[/tex] 1.113×[tex]10^{-2}[/tex]-8.326×[tex]10^{-3}[/tex] 1.490×[tex]10^{-2}[/tex]-8.326×[tex]10^{-3}[/tex] 8.326×[tex]10^{-3}[/tex]
The number of moles of [tex]H_{2}O[/tex] at equilibrium = 1.113×[tex]10^{-2}[/tex]-8.326×[tex]10^{-3}[/tex]
The number of moles of [tex]CO[/tex] at equilibrium = 1.490×[tex]10^{-2}[/tex]-8.326×[tex]10^{-3}[/tex]
The number of moles of [tex]CO_{2}[/tex] at equilibrium = 8.326×[tex]10^{-3}[/tex]
What is equilibrium constant?Equilibrium constant is calculated bt ratio of product of concentration of reactant by product.
K = [tex][H_{2}O]^{2}[/tex]×[tex][CO]^{2}[/tex]/[tex][CO_{2}]^{2}[/tex]
K =( 1.113×[tex]10^{-2}[/tex]-8.326×[tex]10^{-3}[/tex] )∧2× (1.490×[tex]10^{-2}[/tex]-8.326×[tex]10^{-3}[/tex])∧2/(8.326×[tex]10^{-3}[/tex])∧2
K = 0.049 ≈ 0.05
To learn more about equilibrium constant,
https://brainly.com/question/11420477
#SPJ2
3. If we remember seeing something happen, we can trust that it happened just as we think it did. True or False
Answers
[tex] \huge{ \underbrace{ \overbrace{True}}}[/tex]
.
[tex]\huge\mathfrak\purple{Hope \: it \: helps}[/tex]
Note : Because Many of My Dreams came true and I realized.
what is joules? plz help
Answers
What is the final temperature of water given an initial temperature of 28 ˚C, a mass of 7 g, and heat (q) of 184 J (Specific Heat of water = 4.184 )?
Answers
Answer:34.28 Degree celcius
Explanation:The heat given is equal to the change in temperature multiplied by the mass and the specific heat capacity
This gives the equation:Q=mc∆T
Where Q=184,m=7, specific heat capacity=4.184,∆T=X-28,
But ∆T=Final temperature (T'')-Initial temperature (T')
Therefore the equation becomes
184=7×4.184(X-28)
Solving the remaining linear equation gives you X as 34.28°C
What is the correct clases for this drugs
Promethazine
heelp me please
Answers
Answer:
MedlinePlus Drugs Information
Explanation:
Promethazine is in a class of medication called phenothiazines
Please help thank you (15 points)
Answers
Answer:
Jupiter.
Explanation:
Jupiter has the fastest axial rotation time (day) in the list of answers, based on the fact that its day is only 10 hours long.
what is x if x - 2 =0
Answers
Answer:
x-2 = 0
x = 2
hope this was help full
which function of lysosomes is carried out by vacuoles in plant cells
Answers
Answer:
Lysosomes are predominantly found in eukaryotic animal cells and are responsible for breaking down cellular debris
Explanation:
What kinds of questions cannot be answered by chemistry
Answers
I think?
Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answers
Answer:
bubble and foam!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
akshaishsushsusisneysisj
2. An Isotope of technetium, mixed with sulphur and colloidally dispersed in water, is frequentyused in diagnosing various medical conditions because it is readily taken up by various tissues Prior to excretion. Explain why this important
mixture is not a true solution.
Answers
Answer:
This is not a true solution because the colloidal dispersion is not completely homogeneous, and it does not have uniform properties throughout.
Explanation:
hope i helped
identify 2 ways to measure mass
Answers
Answer:
The two ways to measure mass are subtraction and taring.
Element X forms the ion X22- What is the formula of the covalent compound X forms with chlorine?
A XCI
B XCl2
C XCl3
D XCl4
Answers
Answer:
the answer is mostly option a)XCl
Explanation:
Which pair of reactants for a Grignard reaction does not give 2-phenylbutan-2-ol after an aqueous workup?
Answers
If I have a bottle of compound X at a pressure of 45 atm and temperature of 100 °C, what will happen if I raise the temperature to 400 °C?*
Answers
Answer:
55/350
Explanation:
because the answer is in the middle of 50and 400
How many square centimeters are in an area of 5.90 inch^2 ?
Answers
Answer:
38.0644 cm^2
Explanation:
5.90 ×6.451 cm^2explain dehydrogenation
Answers
Answer:
Dehydrogenation is the process by which hydrogen is removed from an organic compound to form a new chemical (e.g., to convert saturated into unsaturated compounds).
Illustrate the law of law of multiple proportions using the formation of SO2 and SO3 by sulphur and oxygen
Answers
As illustrated from law of multiple proportion, the mass of the oxygen which combined with a fixed mass of the sulphur is in simple whole number ratio of 2 is to 3 (2:3).
The law of Multiple proportion states that when two elements combine to form more than one compound, the mass of the second element, which combines with a fixed mass of the first element, will always be ratios of small whole numbers.
To illustrate the law of multiple proportion from sulphur and oxygen, we use the given compounds.
The reaction of oxygen with sulphur to form SO₂ and SO₃:
[tex]S \ + \ O_2 \ -----> SO_2\\\\2SO_2 \ + \ O_2 \ ---> \ 2SO_3[/tex]
atomic mass of oxygen = 16 g
atomic mass of sulphur = 32 g
In the formation of SO₂:mass of sulphur = 32 g and mass of oxygen = (2x16) = 32 g
In the formation of SO₃:mass of sulphur = 32 g and mass of oxygen = (3 x 16) = 48 g
Notice, while mass of sulphur is constant, mass of oxygen changed.
The ratio of mass of oxygen in the given two compounds = 32g : 48g = 2:3
Thus, based on the law of multiple proportion, the mass of the oxygen which combined with a fixed mass of the sulphur is in simple whole number ratio of 2 is to 3 (2:3).
Learn more here: https://brainly.com/question/15537778
Choose the best possible answer for Q.No. A, B, and C.
The following is an acid-base reaction between sulfuric acid and aluminum hydroxide. Use the provided molar masses to answer the questions below:
molar
mass
3 H2SO4
+
2 Al(OH)3
⟶
Al2(SO4)3
+
6 H2O
g/mol
98.08
78.00
342.15
18.02
Note: You need to upload the documents for A, B, and C to show your work.
A. How many moles of sulfuric acid would be required to form 65.21g of Water?
moles of H2SO4 = ________
[ Select ]
B. How many grams of Aluminum Sulfate could be formed if 197.0g aluminum hydroxide reacts with sulfuric acid?
mass of Al2(SO4)3 = ________
[ Select ]
C. To determine the concentration of a sulfuric acid sample, a titration is performed with the above reaction. What is the concentration of the sulfuric acid if a 15.00mL sample reached its titration endpoint with 29.26mL of 0.2855M Al(OH)3?
Molarity of H2SO4 = ________
[ Select ]
Answers
Answer:
c i think
Explanation:
the internacional system of units is based on ?
Answers
Answer:
The international system of units is basic on 7 units.
Hope it helps you.3(b) The balloon did not burst when it is pressed onto 100 nails because
1. the nails are not sharp
2.the surface area of 100 nails produce high pressure on the balloon
3. the larger surface area of 100 nails produce low pressure on the balloon
3(c) To reduce pressure on the contact surface, we must apply force onto the .................... surface area.
1.largest
2.smallest
3. Any size of
Answers
3(c) to reduce pressure force must be applied to the largest surface area (1)
pressure = Force/Area
Which list only includes terms that describe oxygen gas, O2?
A. element, molecule, pure substance
B. atom, compound, molecule
C. atom, element, molecule
D. compound, molecule, pure substance
Answers
Answer:
d
Explanation:
it just makes alot of sense and you got this
Oxygen is a gas that belongs to the chalcogen family and is a reactive non-metal. It is an element, molecule, or pure substance. Thus, option A is correct.
What is a pure substance?A pure substance is defined as a substance that cannot be physically separated into its constituent particles. They are known to have a definite and constant chemical composition. It can be a molecule, element, or compound.
An element is atomic species that cannot be broken into simple sub-particles by chemical processes. On the other hand, if an atomic element bonds to the same or different atom it forms a molecule.
Oxygen gas is an element composed of two atoms of oxygen and is a molecule as the two atoms are linked chemically. It is also a pure substance as it contains the same element.
Therefore, option A. oxygen gas is a pure substance, an element, and a molecule.
Learn more about pure substance, here:
https://brainly.com/question/24462192
#SPJ2
A graduated cylinder is filled with 20ml of water. A rock is dropped in to the graduated cyclinder and the volume of water rises to 30ml
inside the graduated cylinder. The mass of the rock is 23g. What is the density of the rock?
2.3g/ml
0.77g/ml
5g/ml
1.15g/ml
Answers
Answer:
[tex]\boxed {\boxed {\sf 2.3 \ g/mL}}[/tex]
Explanation:
We are asked to find the density of a rock. Density is the substance's mass per unit volume. The formula for calculating density is:
[tex]\rho= \frac{m}{v}[/tex]
The mass of the rock is 23 grams. The volume was found using water displacement. A known amount of water was measured, the rock was added to the graduated cylinder, and the water level was recorded again. The volume is the difference between the final and initial water level. The graduated cylinder originally had 20 milliliters and the water rose to 30 milliliters.
volume = final water level - initial water level volume = 30 mL - 20 mLvolume = 10 mLNow we know the mass and the volume.
m= 23 g v= 10 mLSubstitute the values into the formula.
[tex]\rho= \frac{ 23 \ g }{30 \ mL}[/tex]
Divide.
[tex]\rho= 2.3 \ g/mL[/tex]
The density of the rock is 2.3 grams per milliliter.
what is the chemical formula of ( methane ) ??
Answers
[tex]\huge{ \color{violet}{ \boxed{ \color{hotpink}{Answer}}}}[/tex]
what is the chemical formula of ( methane ) ??
» CH4[tex] \: [/tex]
--⚘ Mishi ChaeYoon ⚘--Answer:
[tex]CH_4[/tex]
Explanation:
Methane is a chemical compound with the formula CH4. ( One atom of carbon and four atoms of hydrogen).
------------------------
OAmalOHopeO
------------------------
