Answer:
940 nanometers wavelength, and about an 300 mHz - 400 gHz frequency
At what altitude the value of ‘g’ would become one fourth (¼)of the surface of the earth?
Answer:
Explanation:
For acceleration due to gravity g , the expression is
g = GM / R² , where G is gravitational constant M is mass of the earth and R is radius of the earth .
At height h , let the value of it becomes g / 4 , so
g / 4 = GM / ( R + h )²
dividing
4 = [( R+ h)² / R² ]
2 = (R + h) / R
2 = 1 + h / R
h / R = 1
h = R
So at height equal to radius of the earth , acceleration due to gravity becomes 1 /4 of value on the surface of the earth .
what is physics and important of physics
Answer:
Confusion
question:
is it multiple choice? or you have to write it
High voltage power is often carried in wire bundles made up of individual strands. In your initial post to the discussion, discuss the forces on the strands of wire due to the current flowing through them. What would happen if the force acted opposite of the known behavior? Provide a detailed description.
Answer:
There will be a huge problem of holding the wire strands together, and the power losses will also be amplified.
Explanation:
The force per unit length on two current carrying conductors, lying parallel to each other is proportional to the product of the current through the conductors, and inversely proportional to their distance apart. This force is attractive if the current flows through these conductors in the same direction, and is repulsive if it flows in the opposite direction.
For the strand of wire that make up a high voltage wire bundle, there will be a force of attraction pulling the wires closer to each other, and they will experience the maximum pulling force possible, since they lie next to each other. This force helps to hold these wires in a high tension wire strand together, limiting the area, and reducing "skin effect."
In the case that this wires in the wire strand acts in opposite of the known behavior, the wires will repel and push each other apart. This pushing apart will increase power loss due "skin effect" which is increased by an increase in exposed surface area of the wire strands. This will pose a big problem for high tension transmission.
A rock is thrown at a window that is located 16.0 m above the ground. The rock is thrown from the ground at an angle of 40.0° above horizontal with an initial speed of 30.0 m/s and experiences no appreciable air resistance. If the rock strikes the window on its upward trajectory, from what horizontal distance from the window was it released?
Answer:
x = 27.3 m
Explanation:
This is a projectile launching exercise, let's start by looking for the time it takes for the rock to reach the height of the window.
Let's use trigonometry to find the velocities of the rock
sin 40 = [tex]v_{oy}[/tex] / v
cos 40 = v₀ₓ / v
v_{oy}= v sin 40
v₀ₓ = v cos 40
v_{oy} = 30 sin 40 = 19.28 m / s
v₀ₓ = v cos 40
v₀ₓ = 30 cos 40 = 22.98 m / s
we look for the time
[tex]v_{y}^2[/tex] = v_{oy}^2 - 2 g y
v_{y}^2 = 19.28 2 - 2 9.8 16 = 371.71 - 313.6 = 58.118
v_{y} = 7.623 m / s
we calculate the time
v_{y} = v_{oy} - gt
t = (v_{oy} - v_{y}) / g
t = (19.28 -7.623) / 9.8
t = 1,189 s
since the time is the same for both movements let's use this time to find the horizontal distance
x = v₀ₓ t
x = 22.98 1,189
x = 27.3 m
Matter must have two physical properties 1. Have mass, and 2
∆ Must move
∆ Use energy
∆ Take up space
∆ Be measure
able
Answer:
Take up space
Explanation:
Actually we know this by the definition of matter which states that "matter is any substance that has mass and takes up space by having volume."
hope it helped you:)
It takes Serina 1.72 hours to drive to school. Her route is 47 km long. What is Serina's average speed on her drive to school? Your Answer :
Explanation:
Average speed = distance / time
v_avg = 47 km / 1.72 hr
v_avg = 27.3 km/hr
solve for x, x=2.7(35)+1/2(-9.7)*35^2
The answer is:
-5846.75
A container contains 200g of water at initial temperature of 30°C. An iron nail of mass 200g at temperature of 50°C is immersed in the water. What is the final water temperature? State the assumptions you need to make in your calculations.
[Given the value of specific heat capacity of water is 4200 J kg^-1 °C^-1 and that of iron is
450 J kg^-1 °C^-1]
Answer:
The final temperature is 31.94°
Explanation:
The mass of the water in the container m₁ = 200 g = 0.2 kg
The initial temperature of the water, T₁₁ = 30°C
The mass of the iron, m₂ = 200 g = 0.2 kg
The temperature of the iron T₂₁= 50°C is immersed in the water,
The specific heat capacity of the water, c₁ = 4200 J/(kg·°C)
The specific heat capacity of the iron, c₂ = 450 J/(kg·°C)
Heat capacity relation is given by the formula;
Heat capacity Q = Mass, m × Specific heat capacity, c × Temperature change, (T₂ - T₁)
Given that energy can neither be created nor destroyed, and with the assumption that all the heat lost by the nail is gained by the water we have;
Heat lost by iron nail = Heat gained by the water
m₁ × c₁ × (T₂ - T₁₁) = m₂ × c₂ × (T₂₁ - T₂)
Where, T₂ is the final temperature
0.2 kg × 4200 J/(kg·°C) × (T₂ - 30) = 0.2 kg × 450 J/(kg·°C) × (50° - T₂)
840·T₂ - 25200 = 4500 - 90·T₂
4500 + 25200 = 840·T₂ + 90·T₂
29700 = 930·T₂
T₂ = 29700/930 = 31.94°.
The final temperature = 31.94°.
what is the best defintion of efficency
Answer: Efficiency signifies a peak level of performance that uses the least amount of inputs to achieve the highest amount of output.
Explanation: It minimizes the waste of resources such as physical materials, energy, and time while accomplishing the desired output.
Answer:
The efficiency of a simple machine is defined as the ratio of useful work done by the machine ( output work) to the total work out into the machine ( input work).
Explanation:
EfficiencyIf a machine overcomes a load ' L ' and the distance travelled by the load is 'Ld' , the work done by the load is L× LD. It is also called output work or useful work.
Therefore, [tex] \boxed{Output \: work \: = L \: \times \: Ld}[/tex]
Likewise, The effort applied to overcome the load is 'E' and the distance covered by effort is 'Ed' , the work done by effort is E × Ed. It is also called input work.
Therefore, [tex] \boxed{Input \: work = E \times Ed}[/tex]
The efficiency of a simple machine is defined as the ratio of output work to the input work .
Therefore, [tex] \boxed{Efficiency ( η)= \frac{outpt \: work}{input \: work} \times 100\%}[/tex]
Efficiency is expressed in percentage. It is a ratio of two works. A machine is never 100% efficient. It is because no machine is friction free and due to friction, some of the input energy is wastes in the form of heat energy.
[tex] \mathrm{Hope \: I \: helped!}[/tex]
[tex] \mathrm{Best \: regards!}[/tex]
A bicycle has a momentum of 36 kg • m/s and a velocity of 4 m/s. What is the mass of the bicycle? 9 kg 32 kg 40 kg 144 kg
Answer:
9 kg
Explanation:
Momentum is mass times velocity.
p = mv
36 kgm/s = m (4 m/s)
m = 9 kg
The mass of the bicycle is 9 kg.
Momentum of the bicycle
The momentum of the bicycle is the product of mass and velocity of the bicycle.
P = mv
where;
P is momentumm is mass v is velocitym = P/v
m = 36/4
m = 9 kg
Thus, the mass of the bicycle is 9 kg.
Learn more about momentum here: https://brainly.com/question/7538238
Calculate the intensity of current flowing through a computer that consumes 180W and operates at 120 V.
A.)0,66 A
B.)12600 A
C.)1,5 A
D.)60 A
Answer:
C) 1.5 A
Explanation:
P = IV
180 W = I (120 V)
I = 1.5 A
All large radioactive atoms decay into smaller atoms by releasing alpha particles. Each alpha particle has 2 protons, 2 neutrons, and 0 electrons. The table below describes several neutral, low-mass atoms.
A 4-column table with 4 rows, labeled Stable Isotopes of Low-Mass Elements. The first column labeled element name has entries hydrogen, helium, lithium, beryllium. The second column labeled symbol has entries H, H e, L i, B e. The third column labeled atomic number has entries 1, 2, 3, 4. The fourth column labeled number of neutrons has entries 0, 2, 4, 5.
An alpha particle is also referred to as a nucleus of which isotope?
lithium-7
helium-4
hydrogen-2
helium-2
Answer: Helium=4 is the answer
Explanation:
took the test and got it right that'
s the answer.
Answer:
It's b
Explanation:
I took the quiz on EDGE and got it right.
I need help pls now plleeeeeeeeaaassseeeee
Answer:
[tex]r = \frac{v}{i} = v = ri \\ i = \frac{v}{r} [/tex]
Suppose that you have been chosen for a space mission to a distant planet. Due to the length of time you'll be away from Earth you must carry out physical activity every day. On earth your, strength and conditioning trainer has determined you must do 90 minutes of exercise every day. If the vehicle is travelling at 0.80 c how much time, according to a timer on the space vehicle should you be active to meet your physical activity requirement?
Answer:
I should be active for 15 hours to meet the physical activity requirement.
Explanation:
Since time dilates in moving objects, we use the formula t = t₀/√(1 - β²) where t = time in space vehicle, t₀ = time on earth = 9 hours and β = v/c where v = speed of space vehicle = 0.8c.
So, t = t₀/√(1 - β²)
t = 9/√(1 - (v/c)²)
= 9/√(1 - (0.8c/c)²)
= 9/√(1 - (0.8)²)
= 9/√(1 - (0.64)
= 9/√0.36
= 9/0.6
= 15 hr
So, according to a timer on the space vehicle, I should be active for 15 hours to meet the physical activity requirement.
identify properties of a human body system
Answer:
integumentary, skeletal, muscular, nervous, endocrine, cardiovascular, lymphatic, respiratory, digestive, urinary, and reproductive
Explanation:
and this is biology not physics
A group of air particles in a balloon are spread far apart and moving rapidly around inside the balloon. The balloon is placed in a refrigerator for 30 minutes. What would you expect to happen to the appearance of the balloon? Explain your answer in terms of particle movement and their change in temperature. The balloon is removed from the refrigerator and placed on the kitchen counter. What would you expect to happen to the appearance of the balloon? Explain your answer in terms of particle movement and their change in temperature.
Answer:
1) The balloon will shrink
2) The balloon will grow bigger and regain its shape
Explanation:
By the kinetic theory of gases, we have;
[tex]v_{rms} = \sqrt{\dfrac{3 \cdot R \cdot T}{MW} }[/tex]
[tex]P = \dfrac{n \cdot MW \cdot vrms^2}{3 \cdot V}[/tex]
Where;
[tex]v_{rms}[/tex] = RMS Speed
R = The universal gas constant
T = The temperature
MW = The Molecular weight
n = The number of moles
V = The volume
P = The pressure
1) When the balloon is placed in the refrigerator for minutes, the temperature inside the balloon will drop and RMS speed will reduce, however due to the elastic wall of the balloon, the pressure will remain the same therefore the volume will reduce and the balloon will shrink
2) When the balloon is placed on the kitchen counter, the temperature inside the balloon will rise leading to the increase in the RMS speed which will raise the pressure effect on the wall of the balloon as the balloon is made of elastic material, as the pressure rises, the wall expands to keep the pressure constant and the volume occupied by the air particles will increase, the balloon will grow bigger and regain its shape.
An archer shoots an arrow in the air, horizontally. However, after moving some
distance, the arrow falls to the ground. Name and define the initial force that sets
the arrow in motion. Explain why the arrow ultimately falls down.
Answer:
The name of the force is elastic (spring) force
Explanation:
The elastic force which is the restoration force of an elastic (spring like) object that tries to return to its initial non-stretched state built up by the pulling of the bow by the archer (using the muscles) pushes on the arrow which the archer releases the same time he leaves the bow string, and the arrow flies in the direction already pointed by the archer
The arrow ultimately falls down due to gravity forces that acts on all objects within the Earths gravitational field. However due to the speed of constant horizontal speed of the arrow and increasing downward speed of the due to the gravity force, the falling of the arrow looks disappointing.
Ken received a 66 on his first math exam, which counted for 20% of his final grade; he now believes that he won't be able to pass the class. His conclusion best illustrates a pessimistic outlook. the fight-or-flight response. problem-focused coping. relative deprivation.
Answer:
His conclusion best illustrates a pessimistic outlook.
Explanation:
As seen in the question above, Ken got 20% of his final grade in the first test he did for this class, that is, there will be other tests that can provide him to reach the grade needed to pass the class. However, even if there are possibilities, he believes that he will not pass the class, he does not have a positive and optimistic view of his future in this class and is sure that he will fail. This negative view of the future is an example of a pessimistic outlook.
A 2-kg cart, traveling on a horizontal air track with a speed of 3m/s, collides with a stationary 4-kg cart. The carts stick together. The impulse exerted by one cart on the other has a magnitude of
Answer:
The impulse exerted by one cart on the other has a magnitude of 4 N.s.
Explanation:
Given;
mass of the first cart, m₁ = 2 kg
initial speed of the first car, u₁ = 3 m/s
mass of the second cart, m₂ = 4 kg
initial speed of the second cart, u₂ = 0
Let the final speed of both carts = v, since they stick together after collision.
Apply the principle of conservation of momentum to determine v
m₁u₁ + m₂u₂ = v(m₁ + m₂)
2 x 3 + 0 = v(2 + 4)
6 = 6v
v = 1 m/s
Impulse is given by;
I = ft = mΔv = m(
The impulse exerted by the first cart on the second cart is given;
I = 2 (3 -1 )
I = 4 N.s
The impulse exerted by the second cart on the first cart is given;
I = 4(0-1)
I = - 4 N.s (equal in magnitude but opposite in direction to the impulse exerted by the first).
Therefore, the impulse exerted by one cart on the other has a magnitude of 4 N.s.
6. What are the methods to control noise pollution?
Answer: Some of the ways to control noise pollution are as follows: (1) Control at Receiver's End (2) Suppression of Noise at Source (3) Acoustic Zoning (4) Sound Insulation at Construction Stages (5) Planting of Trees (6) Legislative Measures.
Answer:
You have to:
a) Improve your insulation.
b) Install a fence
c) Use modern Acoustic wall panels
d) Plant trees
e) Reduce electronic volumes,e.t.c.
Explanation:
okay.
Which waves move fast Longitudinal waves or Transverse waves and why???
Answer:
Transverse wave
Explanation:
Its because in transverse wave the particle displacement is perpendicular to the direction of wave propagation..hope it helps you...
Shortly after receiving a traffic ticket for speeding, Fred made numerous comments about the road signs being inadequate and is GPS telling him a different speed limit. This would be an example of:
Answer:
External locus of control
Explanation:
External locus of control is an attitude people possess that makes them attribute their failures or successes to factors other than themselves. The opposite of this type of attitude is the Internal locus of control where the individuals take responsibility for the outcomes of their actions whether good or bad. One good thing about the external locus of control is that when the individuals with this characteristic record successes, they attribute it to others and this presents them as people with team spirit. However, when they record failures, they do not want to take the blame, but rather attribute it to others.
Fred exhibits an external locus of control because he attributed his speeding to other factors like the road signs and GPS instead of fully admitting that it was his fault.
Which are the two most popular candidates for gamma-ray bursters? Group of answer choices collisions between a white dwarf and a giant, and merger of two neutron stars hypernova making a black hole, and merger of two neutron stars formation of uranium in the core of a supergiant, and collisions of white dwarfs mergers of two black holes, and merger of a neutron star and a white dwarf hypernova making pulsars, and mergers of two white dwarfs
Answer:
hypernova making a black hole, and merger of two neutron stars
Imagine you re in an entrepreneur and have been provided a loan by a bank to set up a small electro plating unit. What would you like to electorate and for what purpose?
Answer:
Electroplating involves deposition of a thin layer of metal onto the surface of a substance(compound) through electric current. This helps preserve the substance(compound) from rust and oxidative damage.
As an entrepreneur which has been provided a loan by a bank to set up a small electro plating unit. I would venture into electroplating electronic/electric appliances parts.This is because these types of appliances are in vogue now and used my millions of people for their day to day activities. This means that more people will come for various degrees of production and repairs which would include electroplating . This translates to more customers and more money for the repayment of the loan.
On a frictionless air track, a 0.30 kg glider moving at 0.40m/s to the right collides with a stationary 0.80kg glider moving at 0.15 m/s to the left. The collision is cushioned by a bumper made of perfectly elastic spring steel. a. What is the velocity of each glider after the collision? b. What is the minimum amount of total kinetic energy during the collision? c. Where is the missing energy?
Answer:
Explanation:
It is the case of perfectly elastic collision . So we shall apply formula of velocity after collision as follows .
Let m₁ and m₂ be the mass colliding with velocity u₁ and u₂ and their velocity become v₁ and v₂ after collision .
[tex]v_1=\frac{(m_1-m_2)u_1 }{m_1+m_2)} +\frac{2 m_2u_2}{(m_1+m_2)}[/tex]
Putting the values
[tex]v_1=\frac{ (.30-.80).40 }{( .30+.80)} +\frac{2\times .80\times(-.15) }{(.30+.80 )}[/tex]
= - 0.4 m /s
So direction of .30 kg mass will be reversed .
[tex]v_2=\frac{ ( m_2-m_1) u_2 }{( m_1+m_2)} +\frac{2 m_1u_1}{(m_1+m_2)}[/tex]
putting the values
[tex]v_2=\frac{ ( .80-.30)(-.15) }{( .30+.80)} +\frac{2 \times.30\times.40}{(.30+.80)}[/tex]
= .15 m /s
The direction of .80 kg will become from left to right ie its direction will be reversed .
b ) Minimum amount of kinetic energy will be at the position when they move with common velocity
common velocity
v = .3 x .4 - .8 x .15 / (.3 + .8)
= 0
c )
Missing energy is stored as elastic potential energy in the spring .
Brandon buys a new seadoo he goes 12 km north from the beach he jumps wakes for 6 km to the east the chases a boat 10 km north what distance did he cover what was his displacement
Answer:
Distance covered 28 km
displacement is 22.8 km North-East
Explanation:
Distance shows how far apart objects or points are from each other. The distance he covered is the sum of all the distance travelled. Therefore:
Distance covered = 12 km + 6 km + 10 km = 28 km
Displacement is a vector quantity (has direction). It is the overall change in position.
The total distance traveled north = 12 km + 10 km = 22 km
The distance traveled east = 6 km
The displacement (d) is:
d² = 22² + 6² = 484 + 36
d² = 520
d = √520 = 22.8 km
Therefore the displacement is 22.8 km North-East
Distance covered 28 km
displacement is 22.8 km North-East
The calculation is as follows:
Distance covered
= 12 km + 6 km + 10 km
= 28 km
Now
The total distance traveled north = 12 km + 10 km = 22 km
And,
The distance traveled east = 6 km
So,
The displacement (d) is:
[tex]d^2 = 22^2 + 6^2\\\\ d^2 = 520\\\\d = \sqrt520[/tex]
= 22.8 km
learn more: https://brainly.com/question/10813422?referrer=searchResults
What is a hypothesis?
A. A piece of information gathered during an experiment
OB. A source that summarizes a primary source
O C. Something that a scientist intentionally changes during an
experiment
O D. An educated guess about the outcome of an experiment
Answer:
D!!!!!
Explanation:
A hypothesis is a supposition or proposed explanation made on the basis of limited evidence as a starting point for further investigation.
Answer:
D. An educated guess about the outcome of an experiment.
Explanation:
Hypothesis is an educated guess about the outcome of an experiment.
Hope this helps ;) ❤❤❤
Help uhh i need to know this answer
Answer:
Explanation:
2. 330.63 ft because v*t=d and 3.09*107=330.63
3. 4.2 because 10/2.4=4.1666
4. 130 miles because 2 hours times 65mph= 130
5. 62.3 seconds because 480000/7700=62.33766233
8. 60 meters, because 0.5 *120 (because 2 minutes converted to seconds is 120) is equal to 60.
A speed that will permit a train or other equipment to stop within one half the range of vision short of a train, engine, railroad car, man or equipment fouling a track, stop signal or a derail or switch lined improperly. When a train or engine is required to move at restricted speed, the crew must keep a lookout for a broken rail and not exceed 20 mph:__________
Answer:
This is called restricted speed
Using your own words, tell me
what is the difference between an Pure Substance and a Mixture? Make sure to give me an example of each.
Answer:
Hey there!
Mixtures are physically combined and can be separated. For example, sand and water is a mixture.
Pure substances are samples of matter with definite, and unchangeable chemical properties. For example, diamond is a pure substance.
Let me know if this helps :)
a pure substance is a substance that has not been mixed with anything, a mixture has been mixed with another substance. an example is
dirt +water=mud iron is an example of a substance
