Answer:
0.21 L.
Explanation:
From the question given above, the following data were obtained:
Initial temperature (T₁) = 17.5°C = 17.5°C + 273 = 290.5 K
Initial volume (V₁) = 173.8 mL
Final temperature (T₂) = 78 °C = 78 °C + 273 = 351 K
Final volume (V₂) =?
V₁/T₁ = V₂/T₂
173.8 / 290.5 = V₂ / 351
Cross multiply
290.5 × V₂ = 173.8 × 351
290.5 × V₂ = 61003.8
Divide both side by 290.5
V₂ = 61003.8 / 290.5
V₂ = 210 mL
Finally, we shall convert 210 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
210 mL = 210 mL × 1 L / 1000 mL
210 mL = 0.21 L
Thus, the final volume of the balloon is 0.21 L.
Answer:
[tex]\boxed {\boxed {\sf 0.775 \ L}}[/tex]
Explanation:
1. Calculated Final VolumeWe are asked to find the final volume of a balloon given a change in temperature. We will use Charles's Law, which states the volume of a gas is directly proportional to the temperature. The formula for this law is:
[tex]\frac{V_1}{T_1}= \frac{V_2}{T_2}[/tex]
The initial volume is 173.8 milliliters and the initial temperature is 17.5 degrees Celsius.
[tex]\frac {173.8 \ mL}{17.5 \textdegree C}= \frac{V_2}{T_2}[/tex]
The balloon is heated to a final temperature of 78.0 degrees Celsius, but the volume is unknown.
[tex]\frac {173.8 \ mL}{17.5 \textdegree C}= \frac{V_2}{78.0 \textdegree C}[/tex]
We are solving for the final volume, so we must isolate the variable V₂. It is being divided by 78.0 degrees Celsius. The inverse of division is multiplication, so we multiply both sides by 78.0 °C.
[tex]78.0 \textdegree C *\frac {173.8 \ mL}{17.5 \textdegree C}= \frac{V_2}{78.0 \textdegree C} * 78.0 \textdegree C[/tex]
[tex]78.0 \textdegree C *\frac {173.8 \ mL}{17.5 \textdegree C}=V_2[/tex]
The units of degrees Celsius cancel.
[tex]78.0 *\frac {173.8 \ mL}{17.5}=V_2[/tex]
[tex]78.0 *9.931428571 \ mL= V_2[/tex]
[tex]774.6514286 \ mL =V_2[/tex]
2. Convert to LitersWe are asked to give the volume in liters, so we must convert out units. Remember that 1 liter contains 1000 milliliters.
[tex]\frac { 1 \ L}{1000 \ mL}[/tex]
[tex]774.6514286 \ mL * \frac{ 1 \ L}{1000 \ mL}[/tex]
[tex]774.6514286 * \frac{ 1 \ L}{1000}[/tex]
[tex]0.7746514286 \ L[/tex]
3. RoundThe original values of volume and temperature have 3 and 4 significant figures. We always round our answer to the least number of sig figs, which is 3. This is the thousandths place for the number we calculated. The 6 in the ten-thousandths place tells us to round the 4 up to a 5.
[tex]0.775 \ L[/tex]
The final volume is approximately 0.775 liters.
Draw a formula for Thr-Gly-Ala (T-G-A) in its predominant ionic form at pH 7.3. You may assume for the purposes of this question that the pKa values of the acidic groups of amino acid residues in the peptide are the same as in the amino acid itself.
Answer:
gggggggggg
Explanation:
gggggggg
The tripeptide formed from threonine, glycine and alanine is neutral at the pH of 7.3. The carboxylic end is negative charged by donating its proton to form the NH₃⁺ group.
What is peptide?Peptides are protein units formed from two or more amino acids bonded through peptide bonds. There are essential and non-essential amino acids. Essential amino acids have to be uptake from food and non-essential amino acids are synthesized inside the body.
Threonine is an essential amino acid with a CH₃CHOH side group. Glycine has the simplest side group hydrogen and alanine has CH₃ side chain. Both glycine and alanine are non-essential amino acids.
Each amino acids are represented with a three letter code or one letter symbol. Thus threonine is T, G for glycine and A for alanine. At a pH of 7.3 the peptide formed from these amino-acids contains a negatively charged carboxylic end.
A positively charged amino end made by protonation from the acid group make the overall charge zero. The structure of the peptide is given in the uploaded image.
To find more about peptides, refer the link below:
https://brainly.com/question/11843803
#SPJ2
What is the biggest cause of change in Earth's systems?
A. Heat
B. Motion
C. Friction
D. Plate tectonics
Answer:
heat
Explanation:
because it's the cause of change
Answer:
heat
Explanation:
because it is a natural factor that causes the change in Earth's system
Carbon disulfide is formed by the reaction of coke (carbon) with sulfur dioxide. How many moles of CS2 will be generated if 8.0 moles of coke react with a surplus of sulfur dioxide? 5C +2502 - CS2 + 4CO A. 0.8 moles B. 1.6 moles C. 3.2 moles OD. 6.4 moles
Is pre ap chemistry hard in high school?
If you don't practice enough it's obviously going to be hard but if you practice enough it's going to be a piece of cake so don't think if it's going to be hard or not just think it's going to be worth the try at the very end
Dylan has a coworker who is always showing up late and then not finishing his work on time . It's frustrating the other members of the team . What can he do that might help the situation ? a ) Complain about the coworker to other team members b ) Ask his coworker if he understands his job responsibilities c ) Tell his boss that the coworker is slacking off d ) Complete his coworker's work for him
The elementary reaction 2H2O(g)↽−−⇀2H2(g)+O2(g) proceeds at a certain temperature until the partial pressures of H2O, H2, and O2 reach 0.0900 bar , 0.00100 bar , and 0.00350 bar respectively. What is the value of the equilibrium constant at this temperature?
Answer:
3.89 ×10^-5
Explanation:
Since they are gaseous reactants, we obtain the equilibrium constant from the given partial pressures;
p(H2O) = 0.0900 bar
p(H2) = 0.00100 bar
p(O2) = 0.00350 bar
The equation of the reaction is;2H2O(g)⇄2H2(g)+O2(g)
Kp= p(H2) . p(O2)/p(H2O)
Kp= 0.00100 × 0.00350/0.0900
Kp= 3.89 ×10^-5
Answer EIGHT questions.
1(a) Whai do you mean by generation of computer? Describe brieíly
5
about third and fourth generations of computer.
B
moga dele
Answer:
Generation in computer terminology is a change in technology a computer is/was being used. Initially, the generation term was used to distinguish between varying hardware technologies. Nowadays, generation includes both hardware and software, which together make up an entire computer system.
5 generation of computer
Main electronic component: based on artificial intelligence, uses the Ultra Large-Scale Integration (ULSI) technology and parallel processing method.
ULSI – millions of transistors on a single microchip
Parallel processing method – use two or more microprocessors to run tasks simultaneously.
Language – understand natural language (human language).
Power – consume less power and generate less heat.
Speed – remarkable improvement of speed, accuracy and reliability (in comparison with the fourth generation computers).
Size – portable and small in size, and have a huge storage capacity.
Input / output device – keyboard, monitor, mouse, trackpad (or touchpad), touchscreen, pen, speech input (recognise voice / speech), light scanner, printer, etc.
Example – desktops, laptops, tablets, smartphones, etc.
3 generation of computer
Main electronic component – integrated circuits (ICs)
Memory – large magnetic core, magnetic tape / disk
Programming language – high level language (FORTRAN, BASIC, Pascal, COBOL, C, etc.)
Size – smaller, cheaper, and more efficient than second generation computers (they were called minicomputers).
Speed – improvement of speed and reliability (in comparison with the second generation computers).
Input / output devices – magnetic tape, keyboard, monitor, printer, etc.
Examples – IBM 360, IBM 370, PDP-11, UNIVAC 1108, etc.
4 generations of computer
Main electronic component – very large-scale integration (VLSI) and microprocessor.
VLSI– thousands of transistors on a single microchip.
Memory – semiconductor memory (such as RAM, ROM, etc.)
RAM (random-access memory) – a type of data storage (memory element) used in computers that temporary stores of programs and data (volatile: its contents are lost when the computer is turned off).
ROM (read-only memory) – a type of data storage used in computers that permanently stores data and programs (non-volatile: its contents are retained even when the computer is turned off).
Programming language – high level language (Python, C#, Java, JavaScript, Rust, Kotlin, etc.).
Explain the working principle of a clinical thermometer
Answer:
A clinical thermometer is a thermometer used to measure human body temperature. Most made in the 20th century are mercury-in-glass thermometers. They are accurate and sensitive, having a narrow place where the mercury level rises very fast. A kink in the tube stops the mercury level from falling on its own.
Consider the reaction: A(aq) + 2B (aq) === C (aq). Initially 1.00 mol A and 1.80 mol B
were placed in a 5.00-liter container. The mole of B at equilibrium was determined to
be 1.00 mol. Calculate K value.
0.060
5.1
25
17
Ugh
Answer:
17
Explanation:
Step 1: Calculate the needed concentrations
[A]i = 1.00 mol/5.00 L = 0.200 M
[B]i = 1.80 mol/5.00 L = 0.360 M
[B]e = 1.00 mol/5.00 L = 0.200 M
Step 2: Make an ICE chart
A(aq) + 2 B(aq) ⇄ C(aq)
I 0.200 0.360 0
C -x -2x +x
E 0.200-x 0.360-2x x
Then,
[B]e = 0.360-2x = 0.200
x = 0.0800
The concentrations at equilibrium are:
[A]e = 0.200-0.0800 = 0.120 M
[B]e = 0.200 M
[C]e = 0.0800 M
Step 3: Calculate the concentration equilibrium constant (K)
K = [C] / [A] × [B]²
K = 0.0800 / 0.120 × 0.200² = 16.6 ≈ 17
A solution has a higher boiling point than its associated pure solvent does.
What is this property of the solution called?
1. boiling-point depression
2. freezing-point depression
3. vapor-pressure lowering
4. boiling-point elevation
Answer:
4 boiling point elevation
equal volumes 50.0 ml of 0.54897 m solution of HCL and 0.9573 M NaOH solution have an initial temperature of 18.5 degrees Celsius react in a coffee cup calorimeter the resulted Solutions records a temperature of 22.9 degrees Celsius since the solutions are mostly water the solution are assumed to have a density of 1.0 g per ml and a specific heat of 4.184 joules per gram degree celsius the heat capacity of the Colorimeter is 1.0 x 10 to power 1 joules per degrees Celsius calculate the heat and gained or released by the solution at a constant pressure in J
Answer:
Explanation:
ok
What volume of water is produced when 38.5 g of ethanol reacts with oxygen at 500°C at 1.75 atm?
CH3CH2OH(g) + 3 O2(g)→ 2 CO2(g) + 3 H2O(g)
Answer:
90.99 or 91.0
Explanation:
Using the balanced equation, you convert 38.5g of ethanol to moles of water. From there, you plug the values into the Ideal Gas Equation: PV=nRT.
Answer: The volume of oxygen gas is 91.4 L.
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given mass of ethanol = 38.5 g
Molar mass of ethanol = 46 g/mol
Plugging values in equation 1:
[tex]\text{Moles of ethanol}=\frac{38.5g}{46g/mol}=0.840 mol[/tex]
The given chemical equation follows:
[tex]CH_3CH_2OH(g)+3O_2(g)\rightarrow 2CO_2(g)+3H_2O(g)[/tex]
By stoichiometry of the reaction:
If 1 mole of ethanol produces 3 moles of water
So, 0.840 moles of ethanol will produce = [tex]\frac{3}{1}\times 0.840=2.52mol[/tex] of water
The ideal gas equation is given as:
[tex]PV=nRT[/tex] .......(2)
where
P = pressure = 1.75 atm
V = volume of oxygen gas = ?
n = number of moles= 2.52 moles
R = Gas constant = 0.0821 L.atm/mol.K
T = temperature of the tank = [tex]500^oC=[500+273]K=773K[/tex]
Putting values in equation 2, we get:
[tex]1.75 atm\times V=2.52mol\times 0.0821L.atm/mol.K\times 773K\\\\V=\frac{2.52\times 0.0821\times 773}{1.75}=91.4L[/tex]
Hence, the volume of oxygen gas is 91.4 L.
Determine the number of moles of aluminum in 2.154 x 10-1 kg of Al. Group of answer choices 5816 mol 7.984 mol 6.02 X 1023 mol 4.801 mol 8.783
Answer:
Avogadro's number is 1 mol = 6.02 * 10^23 elements
It means that 1 mol of atoms is 6.02 * 10^23 atoms
1 mol of atoms = 6.02 * 10^23 atoms
From there, if you divide both sides by 1 mol of atoms, you get
1 = 6.02 * 10^23 atoms / 1 mol of atoms.
That means, that to pass from a number of moles of atoms to number of atoms you have to multipby by the conversion factor
6.02*10^23 atoms Al/ 1 mol Al
That is the second option of the list.
Explanation:
The mass of a container is determined to be 1.2 g. A sample of a compound is transferred to this container, and the mass of the compound plus the container is determined to be 3.06 g. The mass of the compound should be reported as:__.
Answer:
Sorry I don't know what you
According to law of conservation of mass as mass is neither created nor destroyed mass of compound should be reported as 1.86 g that is by subtracting mass of compound from mass of compound and container.
What is law of conservation of mass?According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .
Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.
Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Antoine Lavoisier in the year 1789.
Learn more about law of conservation of mass,here:
https://brainly.com/question/13383562
#SPJ2
What is the oxidation state for bh3
Answer:
As hydrogen is more electronegative than boron, in BH3 the oxidation number of hydrogen should be taken as -1. (E. N. of B = 2.0 & E. N. of H = 2.1)
Suppose, oxidation number of B is x.
So, we can write, x + 3*(-1) = 0
=> x = +3
Therefore, oxidation num
Explanation:
As hydrogen is more electronegative than boron, in BH3 the oxidation number of hydrogen should be taken as -1. (E. N. of B = 2.0 & E. N. of H = 2.1)
Suppose, oxidation number of B is x.
So, we can write, x + 3*(-1) = 0
=> x = +3
Therefore, oxidation num
How many moles of Al are needed to react exactly with 10.00 moles of Fe2O3 according to the following
equation?
Fe2O3 + 2 Al → Al2O3 + 2Fe
A) 15.0 moles
1
B) 20.0 moles
C) 30.0 moles
D) 60.0 moles
E) 35.0 moles
Answer:
Answer is B) 20.0 moles
Explanation:
From the equation,
1 mole of Fe2O3 = 2 moles of Al
therefore 10.0 moles of Fe2O3 = 10×2
= 20.0 moles.
How many moles of Cl− are in 5.76 mg of FeCl3?
Answer:
0.0061650760770388 mole
Why is ice cold water rather than room temperature or warm water used to wash the remainder of the benzoic acid out of the beaker?
As a general rule:
"Solubility of compounds decrease with the increasing of temperature" as you can see in the graph.
Also, filtration, is a chemical process where you are separating a precipitate from a solution.
Now, if you want to recover benzoic acid from an aqueous solution, the better option would be with Ice cold water because its solubility will be lower because temperature is lower producing more precipitate.
Learn more about this process in:
https://brainly.com/question/14918321
Amphiphilic molecule: ___________
a. have both oxidizing and reducing groups.
b. are micelles.
c. have chromophores in two different wavelength regions.
d. have both acidic and basic groups.
e. have both hydrophilic and hydrophobic groups.
A solution is made by mixing 34.5 g of sugar with 75.0 g of water. What is the mass percent of sugar in this solution?
Please explain and show work.
the mass percent of sugar in this solution is 46%.
Answer:
Solution given:
mass of solute=34.5g
mass of solvent=75g
mass percent=[tex]\frac{mass\:of\:solute}{mass\:of \:solvent}*100\%[/tex]
=[tex]\bold{\frac{34.5}{75.0}*100\%=46\%}[/tex]
We know that,
[tex]mass \: solute = \frac{mass \: of \: solute}{mass \: of \: solvent} [/tex]×100
[tex] \frac{34.5}{75.0} = 0.46[/tex]
hope it helps..
We know that water is purified before it is supplied to our houses. Then why do we have filters installed in our houses? What do they serve?
Answer:
Water filters remove elements that cause drinking water to have an unpleasant taste and smell, such as lead, chlorine and bacteria. Home water filtration system will improve the overall purity, taste and smell of your drinking water. It also lowers the pH level of the water that you drink.
Forcus on the yellow highlighted texts, your help is appreciated.
[tex]{ \sf{ \red{no \: pranks}}}[/tex]
Answer:
Transition temperature is the temperature at which a substance changes from one state to another.
Allotropy is the existence of an element in many forms.
Critique this statement: Electrons can exist in any position
outside of the nucleus.
Answer:
However, there has to be 2 electrons on the first shell, and 8 on the others.
Explanation:
Hope this helps :)
Each 5-ml teaspoon of Extra Strength Maalox Plus contains 450 mg of magnesium hydroxide and 500 mg of aluminum hydroxide. How many moles of hydronium ions H3O are neutralized by 1 teaspoon of antacid product?
Answer:
0.0347 moles of hydronium ions
Explanation:
The equation of the neutralization reaction between hydroxide and hydronium ions is given below:
H₃O+ (aq) + OH- (aq) ----> 2 H₂O (l)
From the equation above, 1 mole of hydroxide ions will neutralize one mole hydronium ions.
The moles of hydroxide ions present in 1 teaspoon or 5 mL of antacid product is calculated as follows:
Number of moles = mass / molar mass
Molar mass of Magnesium hydroxide, Mg(OH)₂ = 58 g/mol
Molar mass of aluminium hydroxide, Al(OH)₃ = 78 g/mol
Mass of magnesium hydroxide = 450 g = 0.45 g
Mass of aluminium hydroxide = 500 mg = 0.5 g
Moles of magnesium hydroxide = (0.45/58) moles
Moles of aluminium hydroxide = (0.5/78) moles
Equation of the ionization of magnesium hydroxide and aluminium hydroxide is given below:
Mg(OH)₂ (aq) ----> Mg²+ (aq) + 2 OH- (aq)
Al(OH)₃ (aq) ---> Al³+ (aq) + 3 OH- (aq)
Number of moles of hydroxide ions present in (0.45/58) moles of magnesium hydroxide = 2 × (0.45/58) moles = 0.0155 moles
Number of moles of hydroxide ions present in (0.5/78) moles of aluminium hydroxide = 3 × (0.5/78) moles = 0.0192 moles
Total moles of hydroxide ions = 0.0155 + 0.0192 = 0.0347 moles hydroxide ions
Therefore, 0.0347 moles of hydroxide ions will neutralize 0.0347 moles of hydronium ions.
6) Hydrogen gas can be generated from the reaction between aluminum metal and hydrochloric acid:
2 Al(s) + 6 HCl(aq) + 2 AICI3, (aq) + 3 H2(g)
a. Suppose that 3.00 grams of Al are mixed with excess acid. If the hydrogen gas produced is directly collected
into a 850 mL glass flask at 24.0 °C, what is the pressure inside the flask (in atm)?
b. This hydrogen gas is then completely transferred from the flask to a balloon. To what volume (in L) will the
balloon inflate under STP conditions?
c. Suppose the balloon is released and rises up to an altitude where the temperature is 11.2 °C and the pressure is
438 mm Hg. What is the new volume of the balloon (in L)?
Stoichiometry refers to the relationship between the moles of reactants and products.
This question must be solved using both stoichiometry and the gas laws
The reaction equation is;
2 Al(s) + 6 HCl(aq) --------> 2 AICI3, (aq) + 3 H2(g)
Using stoichiometryNumber of moles of Al = 3g/27g/mol = 0.11 moles
According to the reaction equation;
2 moles of Al yields 3 moles of H2
0.11 moles of Al yields 0.11 * 3/2 = 0.165 moles
Using the gas lawsFrom the ideal gas equation;
PV=nRT
P = ?
n= 0.165 moles
V = 0.85 L
T = 297 K
R = 0.082 atmLK-1mol-1
P= nRT/V
P = 0.165 * 0.082 * 297/0.85
P= 4.73 atm
Under STP conditions;P1 = 4.73 atm
T1 = 297 K
V1 = 0.85 L
P2 = 1 atm
T2 =273 K
V2 =?
From the general gas equation;P1V1/T1 = P2V2/T2
P1V1T2 = P2V2T1
V2 = P1V1T2/P2T1
V2 = 4.73 * 0.85 * 273/1 * 297
V2 = 3.69 L
P1 = 760 mmHg
T1 = 273 K
V1 = 3.69
P2 = 438 mm Hg
T2 = 284.2 K
V2 =?
P1V1/T1 = P2V2/T2
P1V1T2 = P2V2T1
V2 = P1V1T2/P2T1
V2 = 760 * 3.69 * 284.2/438 *273
V2 = 797010.48/119574
V2= 6.67 L
https://brainly.com/question/1190311
What minimum mass of HCl in grams would you need to dissolve a 2.2 g iron bar on a
padlock?
2.8 g is the minimum mass of HCl in grams that would you need to dissolve a 2.2 g iron bar on a padlock.
What is dissolution?When a solute is dissolved in a solvent, a solution is created. Dissolution is the process through which solutes, or dissolved parts, combine to form a solution inside a solvent. In this procedure, the gas, liquid, or solid dissolves inside the original solvent and forms a solution.
In some polymer applications, dissolution is also an issue since it results in swelling, a loss of strength and stiffness, and a change in volume. Whether a chemical process is man-made or natural, dissolution is crucial. Catalysts are tested using dissolution. 2.8 g is the minimum mass of HCl in grams that would you need to dissolve a 2.2 g iron bar on a padlock.
Therefore, 2.8 g is the minimum mass of HCl in grams that would you need to dissolve a 2.2 g iron bar on a padlock.
To know more about dissolution, here:
https://brainly.com/question/23851972
#SPJ2
Write chemical equations for the reactions that occur when solutions of the following substances are mixed:
a. HNO₂ (nitrous acid) and C₂H₇NO (aq) ethanolamine, a base.
b. H₃O+ and F-
a) HNO₂ + C₂H₇NO → N₂ + C₂H₆O + H₂O
b) H₃O⁺ + F⁻ → HF + H₂O
[tex]\large\color{lime}\boxed{\colorbox{black}{Answer : - }}[/tex]
a) HNO₂ + C₂H₇NO → N₂ + C₂H₆O + H₂O
b) H₃O⁺ + F⁻ → HF + H₂O
một chất hữu cơ có cấu tạo c2h2 cho khí br2 vào ta được hỗn hợp khí
Answer:
C2H2 + Br2 → C2H2Br2
Explanation:
Carboxylic acids and alcohols react via dehydration and condensation to produce a/an _______ and water.
Question options:
amine
ether
polymer
ester
Answer:
ester
Explanation:
Carboxylic acids and alcohols react in the presence of strong acid to produce an ester and water. The two carbon chains come together, which is the condensation, and then water is generated, which is dehydration. The resulting compound is an ester.
Manganese-55 has _____neutrons.
55 Mn
25
A. 55
B. 30
C. 25
QUESTION:- Manganese-55 has _____neutrons.
OPTIONS :-
A. 55
B. 30
C. 25
ANSWER:- NUMBER OF NEUTRONS IS EQUAL TO THE DIFFERENCE BETWEEN THE MASS IF THE ATOM AND ATOMIC NUMBER
SO DIFFERENCE IS EQUAL TO :- 55-25 = 30 NEUTRONS.
SO THERE IS 30 NEUTRONS IN SINGLE ATOM OF THE MANGANESE-55 ATOM.
Answer:
the mass of an atom is the sum of proton and neutron which are both concentrated in nocleus of an atom. from the question the mass is given as 55 and the proton is 25.
