What is the equation of the line graphed?

Step-by-step explanation:

So first of all u have to convert the metres into centimetres. After the conversation draw the map of both in centimetres and your map is done. The question is answered

Answer:

Determine the dimensions of the room: Measure the length and width of the room you want to draw a floor plan for using a tape measure. Record these measurements in meters.

Choose a scale: Since you want to use a scale of 1cm to 0.5m, you need to convert your measurements from meters to centimeters. For example, if your room measures 6 meters by 4 meters, you need to multiply each measurement by 100 to get 600cm by 400cm. Then, divide each measurement by 2 to get your scale measurement. In this case, your floor plan will be 300cm by 200cm.

Draw a rough sketch: Using a pencil and graph paper, draw a rough sketch of the room's shape based on the dimensions you have recorded.

Add doors and windows: Using the same scale, add doors and windows to your floor plan. Doors are typically represented by a straight line with an arc on top, while windows are represented by a straight line with a horizontal line through the middle.

Add fixtures and appliances: Add any fixtures and appliances that are permanent to the room, such as sinks, cabinets, and appliances. You can use symbols to represent these items, such as a rectangle for a refrigerator or a triangle for a sink.

Label everything: Finally, label everything on your floor plan using a legible font. This includes the dimensions of the room, the location of doors and windows, and the names of fixtures and appliances.

Step-by-step explanation:

Step-by-step explanation:

To find the range, we need to subtract the smallest value from the largest value in the dataset:

Range = Largest value - Smallest value

Range = 92 - 3

Range = 89

To find the variance and standard deviation, we need to calculate the mean first:

Mean = (Sum of all values) / (Number of values)

Mean = (92+19+41+24+75+53+70+3+67+64+9) / 11

Mean = 45.09 (rounded to two decimal places)

Next, we need to calculate the variance:

Variance = (Sum of squared differences from the mean) / (Number of values - 1)

Variance = [(92-45.09)^2 + (19-45.09)^2 + (41-45.09)^2 + (24-45.09)^2 + (75-45.09)^2 + (53-45.09)^2 + (70-45.09)^2 + (3-45.09)^2 + (67-45.09)^2 + (64-45.09)^2 + (9-45.09)^2] / (11-1)

Variance = 1071.45 (rounded to two decimal places)

Finally, we can calculate the standard deviation by taking the square root of the variance:

Standard deviation = Square root of variance

Standard deviation = Square root of 1071.45

Standard deviation = 32.74 (rounded to two decimal places)

The range tells us the difference between the highest and lowest values in the dataset, which in this case is 89. The variance and standard deviation tell us how spread out the data is from the mean. The higher the variance and standard deviation, the more spread out the data is. In this case, the variance and standard deviation are both relatively high, indicating that the data is fairly spread out.

Answer:

m = 0

Step-by-step explanation:

Slope = rise/run or (y2 - y1) / (x2 - x1)

Pick 2 points (0,2) (1,2)

We see the y stay the same and the x increase by 1, so the slope is

m = 0/1 = 0

So, the slope is 0

The Nutty Prοfessοr shοuld use apprοximately 14.94 pοunds οf cashews and 35 - 14.94 = 20.06 pοunds οf Brazil nuts tο make a 35 pοund mixture that sells fοr $5.31 per pοund.

Assume the Nutty Prοfessοr makes a 35-pοund mixture with x pοunds οf cashews and (35 - x) pοunds οf Brazil nuts.

The cashews cοst $6.80 per pοund, sο the tοtal cοst οf x pοunds οf cashews is $6.8x dοllars.

Similarly, Brazil nuts cοst $4.20 per pοund, sο (35 - x) pοunds οf Brazil nuts cοst 4.2(35 - x) dοllars.

The tοtal cοst οf the mixture equals the sum οf the cashew and Brazil nut cοsts, which is:

6.8x + 4.2(35 - x) (35 - x)

When we simplify, we get:

6.8x + 147 - 4.2x

2.6x + 147

The mixture sells fοr $5.31 per pοund, sο the tοtal revenue frοm selling 35 pοunds οf the mixture is:

35(5.31) = 185.85

When we divide the tοtal cοst οf the mixture by the tοtal revenue, we get:

2.6x + 147 = 185.85

Subtractiοn οf 147 frοm bοth sides yields:

2.6x = 38.85

When we divide by 2.6, we get:

x ≈ 14.94

Tο make a 35-pοund mixture that sells fοr $5.31 per pοund, the Nutty Prοfessοr shοuld use apprοximately 14.94 pοunds οf cashews and 35 - 14.94 = 20.06 pοunds οf Brazil nuts.

To know more pοunds visit:

https://brainly.com/question/29145297

#SPJ1

Answer:

2.

a) log base 10 of 100

b) The expression means that 10 to the 2nd power equals 100.

c) 2

3.

4. It would make sense that the value is between 1 and 2 because 10 to the 1st power is 10, and 10 to the 2nd power is 100. 50 is between 10 and 100 so the value would have to be between 1 and 2. This works because logs are the inverse function to exponentiation.

a) 2.6021

b) 3 and the value is exact because the base 10 in the log expression is technically the exponent when you convert it to exponent form. This works because logs are the inverse function to exponentiation. So 10 to the 3rd power would give you exactly 1000.

The perimeter of the given figures is: Triangle = 4x - 2. Rectangle = 8x - 8, and square = 12x - 8y.

The whole distance encircling a form is referred to as its perimeter. It is the length of any two-dimensional geometric shape's border or outline. Depending on the size, the perimeter of several figures can be the same. Consider a triangle built of an L-length wire, for instance. If all the sides are the same length, the same wire can be used to create a square.

The perimeter of a figure is the sum of all the segments of the figure.

The perimeter of triangle is:

P = 2x - 5 + x + x + 3 = 4x - 2

The perimeter of rectangle is:

P = 2(l + b)

P = 2(3x + 1 + x - 5)

P = 2(4x - 4)

P = 8x - 8

The perimeter of square is:

P = 4(s)

P = 4(3x - 2y)

P= 12x - 8y

Hence, the perimeter of the given figures is: Triangle = 4x - 2. Rectangle = 8x - 8, and square = 12x - 8y.

Learn more about perimeter here:

https://brainly.com/question/18793958

#SPJ1

Random sampling is crucial when surveying as it ensures that the sample selected is representative of the population.

By randomly selecting participants from the population, the sample is likely to be unbiased on average, which means that the results of the study can be generalized to the entire population. Without random sampling, the results of the study may be skewed or biased towards a certain group, which can lead to incorrect conclusions and poor decision-making. Therefore, it is essential to use random sampling when surveying to obtain accurate and reliable results.

Find out more about Random selection

at brainly.com/question/30135122

#SPJ4

By answering the presented questiοn, we may cοnclude that Since a line equatiοn parallel tο this οne will have the same slοpe, the slοpe οf the parallel line is alsο 5/6.

When twο expressiοns are equal, a mathematical equatiοn is a statement stating that equality. Twο sides are jοined by the algebraic symbοl (=), and tοgether they make up an equatiοn. Fοr instance, the claim that "2x + 3 = 9" means that "2x plus 3" equals the number "9" is made in this argument. Finding the value(s) οf the variable(s) necessary fοr the equatiοn tο be true is the gοal οf sοlving equatiοns.

There are variοus types οf equatiοns, including regular and nοnlinear οnes with οne οr mοre elements. "x² + 2x - 3 = 0" is an equatiοn that raises the variable x tο the secοnd pοwer. Mathematical disciplines like algebra, calculus, and geοmetry all make use οf lines.

the given equatiοn:

[tex]$\begin{array}{c}{{5x-6y=30}}\\ {{-6y=-5x+30}}\\ {{y=(5/6)x-5}}\end{array}$[/tex]

Sο the slοpe οf the given line is 5/6.

Since a line parallel tο this οne will have the same slοpe, the slοpe οf the parallel line is alsο 5/6.

To know more about equation visit:

brainly.com/question/649785

#SPJ1

The ordered pairs of given equation are (3/2,4), (1/3, -3),(5/6,0)

An ordered pair is composed of the ordinate and the abscissa of the x coordinate, with two values supplied in parentheses in a specified sequence. Placing a point on the Cartesian plane could be beneficial for visual comprehension.

for example, the ordered pair (x, y) signifies an ordered pair in which 'x' is referred to as the first element and 'y' is referred to as the second element. These items, which can be either variables , have distinct names depending on the context in which they are used. In an ordered pair, the element order is quite significant.

Given Equation of Y=6x−5

First Ordered pair;(,4)

y=4

x=4+5/6

x=3/2

First Ordered pair;(, -3)

y=-3

x=-3+5/6

x=1/3

First Ordered pair; (,0)

y=0

x=5/6

The ordered pairs of given equation are

(3/2,4), (1/3, -3),(5/6,0)

to know more about variables, visit:

https://brainly.com/question/17344045

#SPJ1

The complete question is:

For The Equation, Y=6x−5

Complete The Given Ordered Pairs (,4), (, -3), (,0)

The required value of the function  (f + g)(x) for given f(x) and g(x) as ( 3 / √x )  - ( 2 / x³ ) and √(5x - 7) is equals to ( 3 / √x )  - ( 2 / x³ )  + √(5x - 7).

Function f(x) is equals to,

( 3 / √x )  - ( 2 / x³ ) for all x > 0

Function g(x) is equals to,

g(x) = √(5x - 7)

To get the value of (f + g)(x),

Substitute the value of f(x) and g(x) and  add the functions f(x) and g(x) together,

Sum of f(x) and g(x) is equals to,

(f + g)(x)

= f(x) + g(x)

= ( 3 / √x )  - ( 2 / x³ )  + √(5x - 7)

Therefore, value of the function (f + g)(x) is equals to ( 3 / √x )  - ( 2 / x³ )  + √(5x - 7).

Learn more about function here

brainly.com/question/12827129

#SPJ4

The above question is incomplete, the complete question is:

The function f is defined by f of x is equal to 3 divided by the square root of x minus 2 divided by x cubed for x > 0, g as a function of x is equal to the square root of quantity 5 x minus 7 Find (f + g)(x).

With four decimal places added, we have P(2.04 Z 3.04) 0.0189.

To round a decimal value to two decimal places, use the hundredths place, which is the second place to the right of the decimal point.

Subtracting the area to the left of 1.25 from the area to the left of 2.15 will give us the standard normal area between 1.25 and 2.15.

The area to the left of 1.25 is 0.8944, and the area to the left of 2.15 is 0.9842, according to a conventional normal distribution table or calculator.

So, the standard normal area between 1.25 and 2.15 is:

P(1.25 < Z < 2.15) = 0.9842 - 0.8944 = 0.0898

Rounding to four decimal places, we get:

P(1.25 < Z < 2.15) ≈ 0.0898

We follow the same procedure as before to determine the standard normal region between 2.04 and 3.04:

P(2.04 < Z < 3.04) = P(Z < 3.04) - P(Z < 2.04)\

The area to the left of 2.04 is 0.9798, and the area to the left of 3.04 is 0.9987, according to a conventional normal distribution table or calculator.

So, the standard normal area between 2.04 and 3.04 is:

P(2.04 < Z < 3.04) = 0.9987 - 0.9798 = 0.0189

Rounding to four decimal places, we get:

P(2.04 < Z < 3.04) ≈ 0.0189

To know more about decimal places visit:-

https://brainly.com/question/50455

#SPJ1

Answer:

6

Step-by-step explanation:

We know that a dozen is the value of 12 so to find half a dozen we simply need to half it!

This means that there are 6 eggs in a half dozen.

FUN FACT:

A baker's dozen is 13, one more than a regular dozen!

Hope this helps, have a lovely day!

Answer:

150

Step-by-step explanation:

Using the formulas

A=6a2

V=a3

Solving forA

A=6V⅔=6·125⅔ ≈150

Answer:

Step-by-step explanation:

If the volume of a cube is 125 cm³, it means that each side of the cube measures 5 cm (since 5 x 5 x 5 = 125).

To find the surface area of the cube, we need to calculate the area of each of the six faces and add them together.

The area of each face is simply the length of one side squared (or side x side).

So, the surface area of the cube would be:

6 x (5 cm x 5 cm) = 6 x 25 = 150 cm²

Therefore, the surface area of the cube is 150 cm².

Since means cannot be smaller than 0, the sampling distribution of the mean is always right skewed.

No matter the sample size, the form of the sampling distribution of means is always the same as the population distribution.

We require two assumptions in order to apply the sampling distribution model to sample proportions: The selected values must be independent of one another, according to the independence assumption. The Sample Size Assumption demands that the sample size, n, be sufficiently large.

While doing a t-test, it is typical to make the following assumptions: the measuring scale, random sampling, normality of the data distribution, sufficiency of the sample size, and equality of variance in standard deviation.

To know more about sampling distribution, click the below link

https://brainly.com/question/29375938

#SPJ4

the actual question is :

Which of the following is true about the sampling distribution of the mean?

a. It is an observed distribution of scores

b. It is a hypothetical distribution

c. It will tend to be normally distributed with a

standard deviation equal to the population

standard deviation

d. The mean will be estimated by the standard

error

e. Both (a) and (b)

Answer:

6188 ways

Step-by-step explanation:

there ate 5 objects to be choosen and there is no replacement of the object therefore you got

17 choices for the first selection of the object and 16 objects for the selection of the second object and so on until you get 13 objects for the last selection

totally you have 5 selections also arrangement does not matter there fore you have 17!/12!5! which is 6188

note we used 5! cause there are 5 placed objects and 12! are unplaced objects

note

that you have used one so you have to deduct one every time you use one

the Fourier series solution is not directly used to find the general solution but is used as a part of it, along with the radial solution. The Fourier series solution helps in finding the solution to the given boundary value problem, which, when combined with the radial solution, gives the complete solution to the Laplace equation.

The Fourier series approach that you have used helps in finding the solution to the boundary value problem, i.e., finding u(a,ϕ) for the given boundary conditions. However, to find a general solution to the Laplace equation, we need to use the superposition principle, which states that the sum of any two solutions to the Laplace equation is also a solution.

Therefore, we can use the previously obtained Fourier series solution for u(a,ϕ) as a building block to construct the general solution. We know that the Laplace equation has radial symmetry, which means that the temperature distribution is only a function of radius (rho) and not of angle (ϕ). Hence, we can write the general solution as:

u(rho,ϕ) = f(rho) + u(a,ϕ)

where f(rho) is the radial component of the solution and u(a,ϕ) is the previously obtained Fourier series solution.

To find f(rho), we need to solve the radial ODE using the boundary conditions at rho=0 and rho=a. Once we have obtained f(rho), we can add it to u(a,ϕ) to get the general solution.

Therefore, the Fourier series solution is not directly used to find the general solution but is used as a part of it, along with the radial solution. The Fourier series solution helps in finding the solution to the given boundary value problem, which, when combined with the radial solution, gives the complete solution to the Laplace equation.

To know more about Fourier series solution  click here:

brainly.com/question/29672996

#SPJ4

The total amount of money Carol originally invested is £22,000 in the bank account.

Compound interest is interest that is calculated not only on the initial amount of money invested or borrowed, but also on any accumulated interest from previous periods.

This results in exponential growth or accumulation of interest over time.

Let X be the amount that Carol originally invested in the account.

After 1 year, the amount of money in the account will be X(1+0.025) = X(1.025).

After Carol withdrew £1000, the amount of money in the account will be X(1.025) - £1000.

After 2 years (i.e. on 1st January 2016), the amount of money in the account will be (X(1.025) - £1000)(1+0.025) = (X(1.025) - £1000)(1.025).

We know that the amount of money in the account on 1st January 2016 was £23,517.60, so we can write the equation:

(X(1.025) - £1000)(1.025) = £23,517.60

Expanding the left-hand side and simplifying, we get:

X(1.025)² - £1000(1.025) = £23,517.60

X(1.025)² = £24,567.63

Dividing both sides by (1.025)², we get:

X = £22,000 (rounded to the nearest pound)

To know more about invested visit:

https://brainly.com/question/8557811

#SPJ1

The complete question is -

On the 1st of January 2014, Carol invested some money in a bank account. The account pays 2.5% compound interest per year. On the 1st of January 2015, Carol withdrew £1000 from the account. On the 1st of January 2016, she had £23 517.60 in the account. Work out how much Carol originally invested in the account?

A defective stamp is likely to be chosen at random 1.4% of the time, or about 0.014 times. The observed percentage probability  faulty stamps is below the 3.5% maximum permitted rate,

Name an event from one outcome. Step 2: Compile a list of all potential outcomes, including any positive ones. Step 3: Subtract the number of favorable outcomes from the total number of possibilities that are feasible.

P(faulty) = quantity of defective stamps divided by total quantity of stamps

P(defective) = 10/700.

0.014 P(defective)

Consequently, there is a 1.4% chance (or about 0.014) that a randomly chosen stamp will be flawed.

B-The observed percentage of flawed stamps is:

10 / 700 0.5 – 0.014

Divide this rate by 100 to get the percentage:

0.014 x 100 approximately 1.4%

To know more about probability visit:

https://brainly.com/question/30034780

#SPJ1

Therefore , the solution of the given problem of unitary method comes out to be common shares of Zeil Inc. is 2.23%.

This common convenience, already-existing variables, or all important elements from the original Diocesan adaptable study that followed a particular methodology can all be used to achieve the goal. Both of the crucial elements of a term affirmation outcome will surely be missed if it doesn't happen, but if it does, there will be another chance to get in touch with the entity.

Here,

Earnings per Share are calculated as (Net Income – Preferred Dividends) / the average number of outstanding Common Shares.

=>  Market price per share / earnings per share is the Price-Earnings Ratio.

=> Dividends per Share are calculated as follows: Common Stock Dividends / Average Common Shares Outstanding

=>  Dividend Yield is the product of dividends per share and the share price.

=>  (Beginning Common Shares plus Ending Common Shares) / 2 equals the average number of Common Shares Outstanding.

=>  Starting common shares equals ending common shares, which is

=>  $3,500,000 / $25, or 140,000.

(a) The earnings per share are ($424,000 - $0) / 140,000, which equals $3.03.

The ordinary stock price of Zeil Inc.

(b) The price-earnings ratio for Zeil Inc.'s common shares is 11.20 divided by 3.03, or 3.69.

(c) Dividends per Share: $35,000./140,000. = $0.25

Therefore, $0.25 in dividends are paid per unit of Zeil Inc. common stock.

(d) Dividend Yield: $0.25 divided by $11.20 equals 0.0223, or 2.23%.

The common shares of Zeil Inc. is 2.23%.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

The probability of landing on yellow is 0.2, probability of component is 0.8, and sum of event and complement is 1.

On assuming that the pie is evenly divided into 5 parts,

So, the probability of landing on yellow is = 1/5 = 0.2,

The complement of landing on yellow is the probability of not landing on yellow, which is the probability of landing on any of the other 4 parts of the pie.

So, the probability of the complement is = 4/5 = 0.8,

The sum of the event (landing on yellow) and the complement (not landing on yellow) is equal to the probability of the entire sample space, which is 1.

⇒ P(Yellow) + P(Not Yellow) = 1

⇒ 0.2 + 0.8 = 1

So, the sum of the event and the complement is 1 or 100%.

Learn more about Probability here

https://brainly.com/question/16551257

#SPJ4

The given question is incomplete, the complete question is

A circular pie is divided in 5 parts , Green , Yellow, Blue Black and Red.

Find the probability of landing on yellow, the probability of complement, and the sum of the event and the complement.

x = 4.9

Solution:

We can use the intersecting chords formula:

[tex]7\times7 = 10x[/tex]

[tex]49 = 10x[/tex]

[tex]49\div10=10x\div10[/tex]

[tex]4.9 = x[/tex]

Therefore, x = 4.9.

The three Pythagorean trigonometric identities, which I’m sure one can find in any Algebra-Trigonometry textbook, are as follows:

sin² θ + cos² θ = 1

tan² θ + 1 = sec² θ

1 + cot² θ = csc² θ

where angle θ is any angle in standard position in the xy-plane.

Consistent with the definition of an identity, the above identities are true for all values of the variable, in this case angle θ, for which the functions involved are defined.

The Pythagorean Identities are so named because they are ultimately derived from a utilization of the Pythagorean Theorem, i.e., c² = a² + b², where c is the length of the hypotenuse of a right triangle and a and b are the lengths of the other two sides.

This derivation can be easily seen when considering the special case of the unit circle (r = 1). For any angle θ in standard position in the xy-plane and whose terminal side intersects the unit circle at the point (x, y), that is a distance r = 1 from the origin, we can construct a right triangle with hypotenuse c = r, with height a = y and with base b = x so that:

c² = a² + b² becomes:

r² = y² + x² = 1²

y² + x² = 1

We also know from our study of the unit circle that x = r(cos θ) = (1)(cos θ) = cos θ and y = r(sin θ) = (1)(sin θ) = sin θ; therefore, substituting, we get:

(sin θ)² + (cos θ)² = 1

1.) sin² θ + cos² θ = 1 which is the first Pythagorean Identity.

Now, if we divide through equation 1.) by cos² θ, we get the second Pythagorean Identity as follows:

(sin² θ + cos² θ)/cos² θ = 1/cos² θ

(sin² θ/cos² θ) + (cos² θ/cos² θ) = 1/cos² θ

(sin θ/cos θ)² + 1 = (1/cos θ)²

(tan θ)² + 1 = (sec θ)²

2.) tan² θ + 1 = sec² θ

Now, if we divide through equation 1.) by sin² θ, we get the third Pythagorean Identity as follows:

(sin² θ + cos² θ)/sin² θ = 1/sin² θ

(sin² θ/sin² θ) + (cos² θ/sin² θ) = 1/sin² θ

1 + (cos θ/sin θ)² = (1/sin θ)²

1 + (cot θ)² = (csc θ)²

3.) 1 + cot² θ = csc² θ

Answer:

To solve the quadratic equation 9×^2-15×-6=0, we can use the quadratic formula, which is given by:

x = (-b ± sqrt(b^2 - 4ac)) / 2a

where a, b, and c are the coefficients of the quadratic equation ax^2 + bx + c = 0.

In this case, a = 9, b = -15, and c = -6, so we can substitute these values into the quadratic formula:

x = (-(-15) ± sqrt((-15)^2 - 4(9)(-6))) / 2(9)

Simplifying this expression gives:

x = (15 ± sqrt(225 + 216)) / 18

x = (15 ± sqrt(441)) / 18

x = (15 ± 21) / 18

So the two solutions to the quadratic equation are:

x = (15 + 21) / 18 = 2

x = (15 - 21) / 18 = -1/3

Therefore, the solutions to the quadratic equation 9×^2-15×-6=0 are x = 2 and x = -1/3.

Answer:

going from left to right:

AA

BD

CB

DC

Answer:

7.  300 miles

8. 60 miles

9. 5 miles

10. 1000 meters

Step-by-step explanation:

7.

We Take

60 x 5 = 300 miles

So, Ruth drives 300 miles in 5 hours.

8.  

5 miles = 10 minutes

1 mile = 2 minutes

2 hours = 120 minutes

We Take

120 / 2 = 60 miles

So, Carl drive 60 miles in 2 hours

9.

1 hour and 25 minutes = 85 minutes

We Take

85 / 17 = 5 miles

So, Nick travels 5 miles in an hour and 25 minutes.

10.

100 meters = 2 minutes

50 meters = 1 minute

We Take

50 x 20 = 1000 meters

So, Stan swims 1000 meters in 20 minutes.

Answer:

7. 300 miles/hours
8. 60 miles in 2 hours
9. 5 miles in 2 hours and 25 mins.

10. 1000 meters in 20 minutes.

Step-by-step explanation:

7. 60 x 5= 300 miles/hours

8. 5 miles in 10 minutes so in 2 hours it will be 5 x 12 = 60 miles in 2 hours

9.  5 miles in 2 hours and 25 mins.

10. 1000 meters in 20 minutes.

The probability of obtaining a reading between -0.08°C and 1.68°C is approximately 0.4854 or 48.54%.

Probability is the branch of mathematics concerned with the occurrence of a random event, and there are four types of probability: classical, empirical, subjective, and axiomatic.

The readings at freezing on a set of thermometers are normally distributed, with a mean () of 0°C and a standard deviation () of 1.00°C. We want to know how likely it is that we will get a reading between -0.08°C and 1.68°C.

To solve this problem, we must use the z-score formula to standardise the values:

z = (x - μ) / σ

where x is the value for which we want to calculate the probability, is the mean, and is the standard deviation.

The lower bound is -0.08°C:

z1 = (-0.08 - 0) / 1.00 = -0.08

1.68°C is the upper bound:

z2 = (1.68 - 0) / 1.00 = 1.68

We can now use a standard normal distribution table or calculator to calculate the probabilities for each z-score.

The probability of obtaining a z-score of -0.08 or less is 0.4681, and the probability of obtaining a z-score of 1.68 or less is 0.9535, according to the table. We subtract the probability associated with the lower bound from the probability associated with the upper bound to find the probability of obtaining a reading between -0.08°C and 1.68°C:

P(-0.08°C x 1.68°C) = P(z1 z z2) = P(z 1.68) minus P(z -0.08) = 0.9535 - 0.4681 = 0.4854

As a result, the chance of getting a reading between -0.08°C and 1.68°C is approximately 0.4854 or 48.54%.

To know more about probability visit:

https://brainly.com/question/30719832

#SPJ1