Answer:
Fossil fuels release carbon dioxide into the atmosphere. Natural gas is the best fossil fuel in terms of energy output per unit of carbon dioxide emitted. Biomass is renewable because a new crop can be grown after each harvest, and biomass is a low carbon fuel. Biomass has the approximate chemical formula CHO.
Explanation:
A string of length 10.0 m is tied between two posts and plucked. This sends a wave down the string moving at a speed of 130 m/s with a frequency of 215 Hz. How many complete wavelengths of this wave will fit on the string?
Answer:
16.
Explanation:
In any wave, by definition, there exists a fixed relationship between the speed v, the frequency f , and the wavelength λ, as follows:[tex]v = \lambda * f (1)[/tex]
In our case, v = 130 m/s and f= 215 Hz, so solving for λ in (1), we get:[tex]\lambda = \frac{v}{f} = \frac{130m/s}{215 hz} = 0.61 m (2)[/tex]
In order to know how many wavelengths of this wave will fit on the string, we need just do divide the length of the string (10.0 m) over one single wavelength, as follows:[tex]n = \frac{L}{\lambda} = \frac{10.0m}{0.61m} = 16.4 (3)[/tex]
Since we need to take the integer value from this expression, the number of complete wavelengths that will fit on this string is just 16.explain an experiment of the phenomenon of rainfall
Unclear/incomplete question. However, I inferred you need an explanation of the phenomenon of rainfall.
Explanation:
Basically, the phenomenon of rainfall follows a natural cycle called the water cycle. What we call 'rainfall' occurs when water condensed (in liquid form) in the atmosphere is made to fall down on the ground as tiny droplets as a result of the forces of gravity.
The water cycle makes rainfall possible:
First, water on the earth's surface is evaporated (or is absorbed into) the atmosphere.Next, it then condensed into liquid form; which later falls to the surface to the ground again. And the process continues.A generator is a machine which makes:
electricity
magnetism
magnetic materials
What type of electromagnetic wave is a TV remote and a cloud
Answer: Kids learn about the types of electromagnetic waves in the science of physics ... Microwaves are useful in communication because they can penetrate clouds, ... These are the infrared waves that are used in your TV remote to change channels
Explanation:
Which of the factors below is NOT critical in developing good physical fitness? *
environment
behavior
age
heredity
Answer: Age
Explanation:
Physical fitness has to do with the effective and efficient working of the body system which allows individuals to be healthy.
The factors that are critical in developing good physical fitness include the environment, the behavior of the individual and heredity. To maintain physical fitness, one should exercise, eat healthy, avoid smoking etc. Age is not a factor in physical fitness.
During a hockey game, a puck is given an initial speed of 10 m/s. It slides 50 m on the horizontal ice before it stops due to friction. What is the coefficient of kinetic friction between the pick and the ice.A) 0.12B) 0.10C) 0.11D) 0.090
Answer:
The value is [tex]\mu_k = 0.102[/tex]
Explanation:
From the question we are told that
The initial speed of the pluck is [tex]u = 10 \ m/s[/tex]
The distance it slides on the horizontal ice is [tex]s = 50 \ m[/tex]
Generally from kinematic equation we have that
[tex]v^2 = u^2 + 2as[/tex]
Here v is is the final velocity and the value is 0 m/s given that the pluck came to rest, so
[tex]0^2 = 10 ^2 + 2* a * 50[/tex]
=> [tex]a = - 1 \ m/s^2[/tex]
Here the negative sign show that the pluck is decelerating
Generally the force applied on the pluck is equal to the frictional force experienced by the pluck
So
[tex]F = F_f[/tex]
=> [tex]m * a = m* g * \mu_k[/tex]
=> [tex]1 = 9.8 * \mu_k[/tex]
=> [tex]\mu_k = 0.102[/tex]
A 1430 kg car speeds up from rest
to 14.0 m/s in 7.00 s. lgnoring
friction, how much power did that
require?
The power required by the car if a 1430 kg car speeds up from rest to 14.0 m/s in 7.00 s is 20020 Joules.
What is power?In science and engineering, power is the rate at which work is completed or energy is delivered. It can be expressed as the product of the work completed (W) or the energy transferred (E) divided by the time interval (t), or W/t.
A high-powered motor can complete a given amount of work quickly, or a low-powered motor can accomplish it slowly. Foot-pounds per minute, joules per second (or watts), and ergs per second are examples of units of power, which measure work (or energy) per unit of time.
Given:
A 1430 kg car speeds up from rest to 14.0 m/s in 7.00 s,
Calculate the acceleration and displacement as shown below,
[tex]v = u + at[/tex]
14 = 0 + a × 7
a = 2 m/s²
[tex]s = ut + 1/2at^2[/tex]
s = 0 + 1 / 2 × 2 × 7²
s = 49 m,
Calculate the power as shown below,
Power = 1430 × 2 × 49 / 7
Power = 20020 Joules
To know more about power:
https://brainly.com/question/13787582
#SPJ2
A mass oscillates on a spring, bouncing up and down 5 times per second. From the highest position to the
lowest position of the mass is a distance of 16 cm.
Answer:
i kinda dnt knw srry wanted the points for the answer
Explanation:
Need ASAP!! An object lies motionless on a rough inclined surface .
Answer:
yes
Explanation:
yes
Answer:
that's true
Explanation:
if the rough inclined plane was rough enough than it would be true
Can I get help on this question please
it would be the 3rd one. so C
A disk rotates at a constant angular velocity of 30 degrees per second. Consider a point on the edge of the disk. Through how many degrees has it rotated after 3 seconds?
Answer:
The disk covers a rotation of 90º after 3 seconds.
Explanation:
Since the disk rotates at constant angular speed, we can determine the change in angular position ([tex]\Delta \theta[/tex]), measured in sexagesimal degrees, by the following kinematic formula:
[tex]\Delta \theta = \omega\cdot \Delta t[/tex] (1)
Where:
[tex]\omega[/tex] - Angular velocity, measured in sexagesimal degrees per second.
[tex]\Delta t[/tex] - Time, measured in seconds.
If we know that [tex]\omega= 30\,\frac{\circ}{s}[/tex] and [tex]\Delta t = 3\,s[/tex], then the change in angular position is:
[tex]\Delta \theta = \left(30\,\frac{\circ}{s} \right)\cdot (3\,s)[/tex]
[tex]\Delta \theta = 90^{\circ}[/tex]
The disk covers a rotation of 90º after 3 seconds.
Lab - Wave Properties in a Spring
11-05
The wave characteristics you will observe in this lab are common to all waves (water, light, sound,
etc.). Use your prior knowledge and the book to fill in the following blanks, then go in the hall and
perform the lab.
A wave is a disturbance that moves through (propagates) through empty space or through a
_____________. There are two types of waves. A _____________________ wave requires
matter to travel. List some examples of this type:
A _____________________ wave does not require a medium. Examples include:
In order to start and transmit a mechanical wave, a source of _____________ and an
_______________ medium are required. A single disturbance is referred to as a
_______________, and a series of disturbances is a wave __________.
The questions in bold are those you should observe directly. Others will be answered using the book.
A. TYPES OF MECHANICAL WAVES: In the hall, stretch the slinky on the floor until it is
stretched (but still loose). Practice sending single pulses down the slinky by popping your wrist
from the center to the side and back to the center. Then send a continuous wave train along as
your partner holds the other end still. A piece of ribbon should be tied to one coil. Watch the
motion of this ribbon (representing a particle) as the wave travels through the spring.
In this type of wave, the particles move (perpendicular, parallel)
to the direction the wave travels. This type of wave is called a __________________ wave.
Its pulses are called ________________ and ________________.
Now send a pulse by quickly pushing the spring forward and pulling
it back, as shown. This type of wave is called _______________. Watch the motion of the ribbon.
In this type, the particles move _____________ to the direction the wave travels. Its pulses
are called _____________ and _____________. Label each.
Note that all waves transfer _____________ without transferring _______________. In
mechanical waves, particles of the medium vibrate back and forth in simple harmonic motion while
the disturbance (or _____________) moves from one place to another.
B. WAVE SPEED
Send a large pulse, followed by a small one. Does one pulse catch up to the other? ______
(Hint: The person who sends these waves should watch how the waves look when they return. Make
sure that both pulses are large enough initially to make it back to the sender!) The size of the
pulse is called the __________________ of the wave. Did the size affect the speed? ______
Generate a single transverse pulse in the slinky, keeping the stretch constant. Using a stopwatch,
time the journey of the pulse from one end to the other and back again. Take the average of
several trials. _________
Without changing your positions on the floor (therefore keeping the _____________ the pulse
travels the same), pull the slinky tighter using only about 3/4 of the coils. This makes a completely
different medium through which the pulse will travel. Time the journey as before. ___________
Does the kind of medium affect the speed of the pulse? ___________
Lab – Wave Properties in a Spring ____________________
PHYSICSFundamentals
© 2004, GPB
11-06
C. WAVELENGTH AND FREQUENCY
Shake the slinky back and forth steadily to send a
transverse wave train while your partner holds the other end still. On the diagram, label wavelength
(- Greek letter lambda). The frequency of the wave depends on how fast you shake the slinky.
Shake it regularly but slowly, then regularly but rapidly.
Higher frequency waves are generated by shaking the spring (slowly, rapidly). High frequency
waves have (short, long) wavelengths, and low frequency waves have __________.
The speed of a wave in any medium is equal to the _______________ of the wave X
________________. This wave equation ___________________ shows that f and are
______________ proportional. Write the units for each of the variables in this equation.
The exercise involves filling in the gaps with the possible wave
properties that can be obtained from a spring.
How is the Wave Properties in a Spring Lab exercise correctly completed?The correctly completed exercise is presented as follows;
A wave is a disturbance that moves through a medium. There are two
types of waves. A mechanical wave requires matter to travel. List some
examples of this type: sound wave, water wave, spring waves.
A electromagnetic wave does not require a medium. Examples include: Light waves
In order to start and transmit a mechanical wave, a source of
disturbance and a physical medium are required. A single disturbance is
referred to as a pulse, and a series of disturbance is a wave train.
This type of wave is called transverse wave. Its pulses are called crest
and troughs.
Now send a pulse by quickly pushing the spring forward and pulling it
back, as shown. This type of wave is called longitudinal wave. Watch the
motion of the ribbon. In this type, the particles move parallel to the
direction the wave travels. Its pulses are called compression and
rarefactions. Note that all waves transfer energy without transferring
matter. In mechanical waves, particle of the medium vibrate back and
forth in simple harmonic motion while the disturbance (or energy)
moves from one place to another.
B. Wave speed
Does the pulse catch up to the other? yes. The size of the pulse is called
the amplitude of the wave.
Did the size of the pulse affect the speed? No.
The average time wave it takes the wave to travel
Without changing your positions therefore keeping the distance the
pulse travels the same), pull the slinky tighter using only about 3/4 of
coils. This makes a completely different medium through which the
pulse will travel. Time the journey as before time record. Does the kind
of medium affect the speed of the pulse? Yes
C. Wavelength and Frequency
High frequency waves have short wavelengths and low frequency waves
have long wavelengths.
The speed of a wave in any medium is equal to the frequency of the wave × the wavelength. This wave equation [tex]\underline{f = \dfrac{v}{\lambda } }[/tex] shows that f and λ are
inversely proportional. The units of the variables are;
Units of the frequency, f is hertz unit HzUnits of the velocity, v, is m/sUnits of the wavelength, λ, is meters (m)Learn more about waves here:
https://brainly.com/question/14118172
what is mean by combination reaction ?
[tex] \underline{\purple{\large \sf Combination \: reaction :-}} [/tex]
Those reaction in which two or more substances combine to form a one new substance are called Combination reaction
In this reaction, We can add :
Two or more elements can combine to form a compound.Two or more compounds can combine to from a one new compound.An element and a compound can combine to form a new compound.[tex] \underline{\green{\large \sf For\: example :}} [/tex]
[tex] \sf 2H_{2} + O_{2} \: \underrightarrow{Combination} \: 2H_{2}o[/tex]
In this, Hydrogen is an element and Oxygen is another element. Both are combined to form compound 'Hydrogen oxide'. Hydrogen oxide is commonly known as water.
A particular engine has a power output of 2 kW and an efficiency of 27%. If the engine expels 9085 J of thermal energy in each cycle, find the heat absorbed in each cycle. Answer in units of J.
Answer:
12445 J
Explanation:
Given that
Power output, P = 5 kW
efficiency of the engine, e = 27% = 0.27
Thermal energy expelled, Q(c) = 9085 J
Heat absorbed, Q(h) = ?
Using the formula
e = W/Q(h)
e = [Q(h) - Q(c)] / Q(h)
e = 1 - Q(c)/Q(h)
Now, substituting the values into the formula, we have
0.27 = 1 - 9085/Q(h)
9085/Q(h) = 1 - 0.27
9085/Q(h) = 0.73
Q(h) = 9085 / 0.73
Q(h) = 12445 J
Thus, the heat absorbed is 12445 J
two spheres A and B are projected off the edge of a 1.0 m high table with the same horizontal velocity . sphere A has a mass of 20.g and sphere B has a mass of 10.g.
If both spheres leave the edge of the table at the same instant, sphere A will land
a. at some time after sphere B.
b. at the same time as sphere B.
c. at some time before sphere B.
d. There is not enough information to decide.
Answer:
c. because A will land first becuase its heavier
Explanation:
A 300 kg piano needs to be moved to the other side of the room. The maximum static frictional force is equal to 90 N and the kinetic frictional force is equal to 70 N. Calculate the acceleration of the piano for an applied force of 100 N.
Answer:
a = 0.1 m/s²
Explanation:
If the maximum static frictional force is 90 N, this means that any applied force that will overcome this force, will cause the piano to slide, so kinetic frictional force applies.Under these conditions, the net force in the horizontal direction is just the difference between the applied force (which is larger that the static friction force) and the kinetic frictional force, as follows:[tex]F_{net} = F_{app} -F_{frk} = 100 N - 70 N = 30 N (1)[/tex]
By the same token, according Newton's 2nd Law, this force is just equal to the product of the mass of the piano, times the acceleration, as follows:[tex]F_{net} = m* a = 300 Kg * a = 30 N (2)[/tex]
Solving for a:[tex]a = \frac{F_{net}}{m} = \frac{30 N}{300kg} = 0.1 m/s2 (3)[/tex]
WILL MARK BRAINLIEST JUST PLEASE HELP
Answer:
40N in either direction is the answer
A 2150 kg car, moving east at 10.0 m/s, collides and joins with a 3250 kg car. The cars move east together at 5.22 m/s. What is the 3250 kg car’s initial velocity calculated to the nearest tenth? Record your answer in the boxes below. Be sure to use the correct place value.
Answer:
2.1 m/s
Explanation:
According to law of conservation of momentum;
m1u1 + m2u2 = (m1+m2)v
m1 and m2 are the masses
u1 and u2 are the initial velocities
v is the common velocity
Given
m1 = 2150kg
m2 = 3250kg
u1 = 10.0m/s
u2 = ?
v = 5.22m/s
Substitute and get u2
2150(10) + 3250u2 = (2150+3250)5.22
21,500 + 3250u2 = 5400(5.22)
3250u2 = 28,188 - 21500
3250u2 = 6688
u2 = 6688/3250
u2 = 2.1 m/s
Hence the 3250 kg car’s initial velocity has an initial velocity of 2.1 m/s
PS Final Exam
An eagle travels west for 240 km in 4 h. What is the eagle's speed?
0 236 km/h
O 960 km/h
O 60 km/h
-60 km/h
Please help!!
A person is driving in a circle at 20m/s. Are they accelerating?
In an open circuit like the picture
A. the light bulb will produce light
B. a resistor controls the flow of current
C. the light bulb will be off
D. current will flow
In an open circuit like the picture the light bulb will be off. So, option (C) is correct.
What is electric circuit?Electric circuit is a way for current to flow through electricity. An electric circuit consists of a source of energy for the charged particles that make up the current, like a battery or generator; sources of current-using equipment, like lamps, electric motors, or computers; and the connecting wires or transmission lines.
Ohm's law and Kirchhoff's rules are two of the fundamental mathematical laws that define how electric circuits function.
In the given diagram, the circuit is open. So, no current passes through it and the light bulb will be off. Hence, option (C) is correct.
Learn more about electric circuit here:
https://brainly.com/question/29032441
#SPJ2
TRUE/FALSE, the scientific question is written like “I wonder if [dependent variable] is affected by [independent variable].”
g You heard the sound of a distant explosion (3.50 A/10) seconds after you saw it happen. If the temperature of the air is (15.0 B) oC, how far were you from the site of the explosion
Answer:
The answer is "1557 meters".
Explanation:
speed of sound in ([tex]\frac{m}{s}[/tex]) [tex]= 331.5 + 0.60 \ T^{\circ}\ C\\\\[/tex]
[tex]\to V = 331.5 + 0.6 \times 24 = 346 \frac{m}{s}\\\\\to t = 4.5 \ seconds \\\\\to S = vt = 346 \times 4.5 = 1557 \ meters[/tex]
QUESTION 23
How much electric energy will be used by a 115 V, 60 W Eghtbulb in one minute
69.
2215
5800
6900)
*
Xpwe-
Answer:
E = 3600 J
Explanation:
Given that,
Voltage, V = 115 V
Power of electric bulb, P = 60 W
We need to find the electric energy used in 1 minute. The electric energy use is given by :
[tex]E=P\times t\\\\E=60\ W\times 60\ s\\\\E = 3600\ J[/tex]
Hence, the electrical energy is 3600 J.
WGVU-AM is a radio station that serves the Grand Rapids, Michigan area. The main broadcast frequency is 1480kHz. At a certain distance from the radio station transmitter, the magnitude of the magnetic field of the electromagnetic wave is 3.0x10^-11T.
a. Calculate the wavelength
b. What is the angular velocity?
c. Find the wave number of the wave.
d. What is the amplitude of the electric field at this distance from the transmitter?
Answer:
a
[tex]\lambda = 202.7 \ m[/tex]
b
[tex]w = 9.3 *10^{6} \ rad/s[/tex]
c
[tex]k = 0.031 m^{-1}[/tex]
d
[tex]E_{max} = 9.0 *10^{-3} \ V/m[/tex]
Explanation:
From the question we are told that
The frequency of the radio station is [tex]f= 1480 \ kHz = 1480 *10^{3}\ Hz[/tex]
The magnitude of the magnetic field is [tex]B = 3.0* 10^{-11} \ T[/tex]
Generally the wavelength is mathematically represented as
[tex]\lambda = \frac{c}{f}[/tex]
Here c is the speed of light with value [tex]c = 3.0 *10^{8} \ m/s[/tex]
So
[tex]\lambda = \frac{3.0 *10^{8}}{ 1480 *10^{3}}[/tex]
=> [tex]\lambda = 202.7 \ m[/tex]
Generally the angular frequency is mathematically represented as
[tex]w = 2 \pi * f[/tex]
=> [tex]w = 2 * 3.142 * 1480 *10^{3}[/tex]
=> [tex]w = 9.3 *10^{6} \ rad/s[/tex]
Generally the wave number is mathematically represented as
=> [tex]k = \frac{2 \pi }{\lambda}[/tex]
=> [tex]k = \frac{2 * 3.142 }{ 202.7}[/tex]
=> [tex]k = 0.031 m^{-1}[/tex]
Generally the amplitude of the electric field at this distance from the transmitter is mathematically represented as
[tex]E_{max} = c * B[/tex]
=> [tex]E_{max} = 3.0 *10^{8} * 3.0* 10^{-11}[/tex]
=> [tex]E_{max} = 9.0 *10^{-3} \ V/m[/tex]
A motorcycle skids for a distance of 2.0 m with the icy road pushing on its tires with force of 120 N as its
brakes are applied
What is the change in kinetic energy for the motorcycle?
Round the answer to two significant digits.
Answer:
-240
Explanation:
A motorcycle skids for a distance of 2.0 m on an icy road, then the change in kinetic energy for the motorcycle will be equal to -240 J.
What is kinetic energy?The force which a moving object has is referred to as kinetic energy in physics. It is defined as the number of effort required to propel a person of a specific mass from still to a specific velocity.
Aside from slight fluctuations in speed, your body holds onto the kinetic energy it obtains during acceleration.
When the body slows down from its present level to a condition of rest, the same quantity of energy is used.
Formally, kinetic energy is any quantity that has a gradient concerning time in the Lagrangian of a system.
As per the given information in the question,
Distance, d = 2.0 m
Friction, f = 120 N
The angle between displacement and friction force, θ = 180°
Now, the change in kinetic energy for the motorcycle = Work done by the friction.
K.E = f × d(cos θ)
= 120 (2.0 m)(cos 180°)
Δ K.E = -240 J
To know more about Kinetic energy:
https://brainly.com/question/26472013
#SPJ2
A radioactive nuclide of atomic number Z emits an alpha particle and the daughter nucleus then emits a beta particle. What is the atomic number of resulting nuclide?
A) Z-1
B) Z+1
C) Z-2
D) Z-3
Answer:
A) Z-1
Explanation:
when a radioactive element of atomic number Z emits an alpha particle, the mass of the new nucleus decreases by 2, i.e the new atomic number of the element = ( Z- 2).
Also, when the daughter nucleus emits a beta particle, the new nucleus increases by 1, that is the new atomic number of the element = (Z + 1).
Thus, the atomic number of resulting nuclide = Z ( - 2) + ( + 1).
= Z - 2 + 1
= Z - 1
Therefore, the atomic number of resulting nuclide is Z - 1
Help me please..
When the slope of a velocity vs. time graph is negative and constant,
what type of motion is occurring?
A) No motion
B) Constant speed
C) Acceleration
D) Constant Velocity
E) Going in circles
(35) Calculate the total charge of all the electrons in a copper plate of mass 3.0g,
atomic number z = 29 and atomic mass 63.5g/mol. (Avogadro's no.- 6.02x1023
atoms, e = 1.6x10-1°C)
Given :
A copper plate of mass 3.0g.
Atomic number, z = 29.
Atomic mass, M.M = 63.5 g/mol.
Avogadro's number, [tex]N_a = 6.02\times 10^{23}\ atoms[/tex].
Charge on electron, [tex]e = 1.6\times 10^{-19}\ C[/tex].
To Find :
The total charge of all the electrons.
Solution :
Moles of copper,
[tex]m = \dfrac{3}{63.5}\ moles\\\\m = 0.047 \ moles[/tex]
Number of atoms in 0.047 moles of copper :
[tex]n = 0.047\times 6.02\times 10^{23}\\\\n = 2.83\times 10^{22} \ atoms[/tex]
Since, there are 29 electrons on each atoms.
So, total charge is :
[tex]C = 2.83\times 10^{22}\times 29\times 1.6\times 10^{-19}\ C\\\\C = 131312\ C\\\\C = 1.31 \times 10^5\ C[/tex]
Hence, this is the required solution.
20 pts.
Which of the following statements is true?
O Electromagnets use electrlcity and magnets.
O Magnetic fields are strongest around the poles of a magnet.
O The south pole of a magnet will repel the south pole of another magnet.
O all of the above
Answer:
all are true so d is right
Explanation:
Electromagnets use electrlcity and magnets is true.
Magnetic fields are strongest around the poles of a magnet is true.
The south pole of a magnet will repel the south pole of another magnet is true
and since all of them is true the answer is d all of the above
