What is the concentration of a 15.0 mL sample of HCl if 28.2 mL of 0.150 M NaOH is needed to reach the equivalence point?
Answers
Answer:
0.282 M
Explanation:
Please see the step-by-step solution in the picture attached below.
Hope this answer can help you. Have a nice day!
The concentration of the 15.0 mL sample of HCl is 0.282 M.
To find the concentration of HCl, we can use the concept of stoichiometry and the balanced chemical equation for the reaction between HCl (acid) and NaOH (base):
[tex]HCl + NaOH - > NaCl + H_2O[/tex]
The balanced equation shows a 1:1 mole ratio between HCl and NaOH. Therefore, the moles of HCl that reacted will be equal to the moles of NaOH used at the equivalence point.
First, we find the moles of NaOH used:
Moles of NaOH = Volume (in L) × Concentration
Moles of NaOH = 0.0282 L × 0.150 mol/L = 0.00423 mol
Since the moles of HCl and NaOH are equal, the moles of HCl are also 0.00423 mol.
Now, we calculate the concentration of HCl:
Concentration of HCl = Moles of HCl / Volume (in L)
Concentration of HCl = 0.00423 mol / 0.0150 L = 0.282 M
To know more about balanced chemical equation , here
brainly.com/question/29130807
#SPJ2
Related Questions
What is an example of a polyatomic ion
Answers
Answer: The hydroxide cation (OH -) and the phosphate cation (PO 4 3-) are both polyatomic ions.
Explanation:
Answer:
OH - and PO 4 3- are both polyatomic ions
If a body was lying on their back when they died, and was moved to their front after 12 hours, where would one see the skin discoloration from pooling blood?
Answers
Answer:the parts of the body which is nearest to the ground ie thier back will show discoloration
Explanation:
If the body remains at a position for long hours, the parts of the body which is nearest to the ground can develop a skin discoloration as a result of pooling of blood in the tissues and this is called livor mortis, which tends to be permanent from 8Hours upwards.
Answer the questions using the drop-down menus.
Which is the independent variable in this experiment?
Which is the dependent variable in this experiment?
Which is a controlled variable in this experiment?
Answers
In the experiment to measure the heat absorbed by a material placed in
the Sun, we have;
The independent variable is either the angle of insulation or the type of materialThe dependent variable is the temperature of the materialThe controlled variable is the type of material when the angle of insulation is the independent variable and vice versaWhat differentiates the given experimental variables?The possible experiment is with regards to the factors that influence energy from the Sun
The factors investigated are;
The type of material and the angle of lighting (insulation) affects the absorption of heat
The independent variable is the variable that is the cause of the effect
measured in the experiment.
It is the variable that the researcher has control over or controls and
varies during the experiment to produce the measured effect.
In the above experiment, the independent variable are either ;
The angle of insulation or the type of material respectivelyThe dependent variable is the variable that is under test or that is being measured.
In the above experiment the dependent variable is the temperature of the material which can be measuredThe controlled variable is the variable that remains the same or is held
constant during the experiment and can be used as reference to
compare the dependent variable.
In the experiment, the controlled variable are either;
The type of material when the angle of insulation is the independent variable or vice versaLearn more about independent and dependent variables here:
https://brainly.com/question/3764906
Answer:
angle of light
temperature of material
type of material
Explanation:
E d g e 22 !
what is the most significant force that attracts water molecules to each other?
Answers
Answer:
Hydrogen Bonds
hope this helps
~Savannah :))
According to the forces of attraction, hydrogen bonds is the most significant force that attracts water molecules to each other.
What are forces of attraction?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/2122941
#SPJ2
If 15 g of CzHo reacts with 60.0 g of Oz, how many moles of water (H2O)
will be produced? (Hint: use what you know about limiting reactant) *
2 C2H6 + 7 O2 + 4 CO2 + 6 H2O
O 1.5 mol H20
O
1.6 mol H20
O
1.0 mol H20
O
1.1 mol H20
Answers
Answer:
1.5 mol H2O
Explanation:
Limiting reactant was C2H6 - 0.5 moles
Fomula became .5C2H6 + 1.75O2 = 1CO2 + 1.5H2O
Addition of _____________ to pure water causes the least increase in conductivity
Answers
organic molecules
because organic molecules does not dissociate in water
How do stars contribute to the elements inside you?
Answers
Answer:
yes
Explanation: i took the test on this
what is the diffrence between displacement ans double displacement reactions write equations for these reactions
Answers
Answer:
Single Displacement reaction
In a displacement reaction, a more reactive element replaces a less reactive element from a compound.
Change in colour takes place with no precipitate forms.
Metals react with the salt solution of another metal.
Examples:
2KI + Cl2 → 2KCl + I2
CuSO4 + Zn → ZnSO4 + Cu
Double displacement reaction
In a double displacement reaction, two atoms or a group of atoms switch places to form new compounds.
Precipitate is formed.
Salt solutions of two different metals react with each other.
Examples:
Na2SO4 + BaCl2 → BaSO4 + 2NaCl
2KBr + BaCl2 → 2KCl + BaBr2
Hope this helps...Please Mark as Brainliest!!
What’s the answer ?
Answers
Answer:
45.3°C
Explanation:
Step 1:
Data obtained from the question.
Initial pressure (P1) = 82KPa
Initial temperature (T1) = 26°C
Final pressure (P2) = 87.3KPa.
Final temperature (T2) =.?
Step 2:
Conversion of celsius temperature to Kelvin temperature.
This is illustrated below:
T(K) = T(°C) + 273
Initial temperature (T1) = 26°C
Initial temperature (T1) = 26°C + 273 = 299K.
Step 3:
Determination of the new temperature of the gas. This can be obtained as follow:
P1/T1 = P2/T2
82/299 = 87.3/T2
Cross multiply to express in linear form
82 x T2 = 299 x 87.3
Divide both side by 82
T2 = (299 x 87.3) /82
T2 = 318.3K
Step 4:
Conversion of 318.3K to celsius temperature. This is illustrated below:
T(°C) = T(K) – 273
T(K) = 318.3K
T(°C) = 318.3 – 273
T(°C) = 45.3°C.
Therefore, the new temperature of the gas in th tire is 45.3°C
A child has a balloon in his house in the air conditioning. He goes outside with the balloon on a hot day. What happens to the temperature of the gas and volume of the balloon?
Answers
Answer:
There would be an increase in temperature and corresponding increase in the volume of the balloon
Explanation:
Charles law is been here
Charles law states that the volume of a given mass of gas is directly proportional to the temperature in Kelvin, provided that the pressure on the gas is kept constant. Mathematically Charles law can be represented thus;
V∝ T
Where V is the volume of the gas and;
T is the temperature.
Relating Charles Law to the question
The child moved outside from the room, constant atmospheric pressure is maintained.The temperature of the room is lower than the temperature outside.From Charles law postulation, there would be an increase in volume because of the increased temperature, since our pressure is same.
the SI unit for forces is it a newton, force, unbalanced forces, balanced forces, net forces pick on I need you help
Answers
Answer: The SI unit for force is Newtons (N).
. Which type of rock would be affected the most by the
water cycle?
Answers
Answer:
maybe talc because it is the softest type of rock
Explanation:
Explain how atomic interactions determine a material to be transparent and opaque
Answers
Answer:
The materials are opaque or crystalline from a client to the orientation and type of union between their atoms, forming two types of structures.
These two structures can be crystalline or amorphous.
In the case of being crystalline, these unions do not allow light to pass through the medium of the object or body of said compound, making it totally refract and giving the appearance of OPAQUE.
On the other hand, in those compounds that we call amorphous, the atoms are located in a different way that makes light pass through them, without absorbing or identifying any light beam, so they look transparent.
Explanation:
Example: A glass cup has an amorphous structure, while a porcelain or porcelain plate has a crystalline structure.
An organism that has 2 dominant alleles is called... *
homozygous recessive
homozygous dominant
heterozygous recessive
heterozygous dominant
HELP
Answers
Answer:
Homozygous dominant
Explanation:
The metabolic oxidation of glucose, C6H12O6, in our bodies produces CO2, which is expelled from our lungs as a gas.
C6H12O6(aq) + 6 O2(g) → 6 CO2(g) + 6 H2O(l)
Calculate the volume of dry CO2 produced at body temperature (37°C) and 0.960 atm when 24.5 g of glucose is consumed in this reaction.
Answers
Answer:
[tex]\large \boxed{\text{21.6 L}}[/tex]
Explanation:
We must do the conversions
mass of C₆H₁₂O₆ ⟶ moles of C₆H₁₂O₆ ⟶ moles of CO₂ ⟶ volume of CO₂
We will need a chemical equation with masses and molar masses, so, let's gather all the information in one place.
Mᵣ: 180.16
C₆H₁₂O₆ + 6O₂ ⟶ 6CO₂ + 6H₂O
m/g: 24.5
(a) Moles of C₆H₁₂O₆
[tex]\text{Moles of C$_{6}$H$_{12}$O}_{6} = \text{24.5 g C$_{6}$H$_{12}$O}_{6}\times \dfrac{\text{1 mol C$_{6}$H$_{12}$O}_{6}}{\text{180.16 g C$_{6}$H$_{12}$O}_{6}}\\\\= \text{0.1360 mol C$_{6}$H$_{12}$O}_{6}[/tex]
(b) Moles of CO₂
[tex]\text{Moles of CO}_{2} =\text{0.1360 mol C$_{6}$H$_{12}$O}_{6} \times \dfrac{\text{6 mol CO}_{2}}{\text{1 mol C$_{6}$H$_{12}$O}_{6}} = \text{0.8159 mol CO}_{2}[/tex]
(c) Volume of CO₂
We can use the Ideal Gas Law.
pV = nRT
Data:
p = 0.960 atm
n = 0.8159 mol
T = 37 °C
(i) Convert the temperature to kelvins
T = (37 + 273.15) K= 310.15 K
(ii) Calculate the volume
[tex]\begin{array}{rcl}pV &=& nRT\\\text{0.960 atm} \times V & = & \text{0.8159 mol} \times \text{0.082 06 L}\cdot\text{atm}\cdot\text{K}^{-1}\text{mol}^{-1} \times \text{310.15 K}\\0.960V & = & \text{20.77 L}\\V & = & \textbf{21.6 L} \\\end{array}\\\text{The volume of carbon dioxide is $\large \boxed{\textbf{21.6 L}}$}[/tex]
The concentration of hydroxide ions is greater than the concentration of hydronium ions for acidic solution. True or false.
Answers
Answer: False
Explanation:
An acid is defined as the substance which looses hydrogen ion or hydronium ions when dissolved in water.
A base is defined as the substance which looses hydroxide ions when dissolved in water.
If the solution has higher hydronium ion concentration as compared to the hydroxide ion concentration, then the pH will be low and the solution will be acidic.
If the solution has low hydronium ion concentration as compared to the hydroxide ion concentration then the pH will be high and the solution will be basic.
What are three examples of acid-base reactions in cooking
Answers
Answer:
Lemon juice baking soda and vinegar
Explanation:
Which of these conclusions is correct about P and Q in the diagram?
P represents the land and Q represents the ocean.
P represents the ocean and Q represents the land.
P represents the land and Q represents the atmosphere.
P represents the atmosphere and Q represents the ocean.
Answers
Answer:
P represents the atmosphere and Q represents the ocean.
Explanation:
What does the questions “how much?” and “how many?” have in common?
Answers
Ideal Stoichiometry
Barium oxide has a replacement reaction with lithium. Calculate the mass of Barium oxide needed to react with 34.67 g of lithium.
*equation needed and thorough explanation please*
A- 340.5
B- 383.0
C- 455.0
D- 256.8
Answers
Answer:
the answer is 383.0
hope it is helpful
Explain on any two materials that you would expect to use for the wheelchair (both back support and
arm support) with less generation of heat during the hot summers.
Answers
Answer:
In the backrest use materials where it is easy to clean and where they do not absorb fluids, in this way it would be cooler, such as an ecological leather simulator.
And in the armrest as well, but in both areas we must not rule out that if or if it should have even a minimum of padded surface so that the patient or the person who spends most of the day in the wheelchair does not suffer from joint pain.
Explanation:
Some wheelchair factories also implement modern chairs where they are made of stainless steel structures lined with padded material with perforated fabrics that allow breathing and aeration of body areas that have contact with the fabric.
Describe the different types of storms.
Answers
Answer:
The different types of storms are hailstorms, ice storms, snowstorms, thunderstorms, wind storms, hurricanes, and tornadoes.
Explanation:
Which of the following did Antoine Lavoisier correctly characterize as an element? light silicone dioxide mercury
Answers
Answer: mercury
Explanation: I looked up the answer to your question.
Answer:
Mercury
Explanation:
I did this question and I got it right.
Copper and silver are two examples of atoms that will form a(n) _____.
metallic bond
ionic bond
covalent bond
none of the above
Answers
Answer:
metallic bond but not completely sure
Explanation:
Calculate the molar mass of ammonium chloride
Answers
Answer:
53.491 g/mol
Explanation:
Create the chemical compound and find each individual element's molar mass. Lastly, add them up.
How many senses does the human body have?
O A. 3
B. 5
Answers
Answer:
B
Explanation:
sight, hearing, smell, taste and touch
Answer:
Most easiest answer..
There are 5 senses in human body.☺️
What pH does an acid have?
Answers
Answer:
The pH scale ranges from 0 to 14. A pH of 7 is neutral. A pH less than 7 is acidic. A pH greater than 7 is basic
Explanation:
Analysis: The limiting reactant(s) appeared to be
because
Answers
there is nothing with which it can react
Explanation:
The limiting reactant(s) prevents a reaction from continuing because there is none left.
Why do limiting reactants occur?Identification of the limiting reactant makes it possible to calculate the theoretical yield of a reaction. The reason there is a limiting reactant is that elements and compounds react according to the mole ratio between them in a balanced chemical equation.
How do you get the limiting reactant?The reactant that is consumed first and limits the amount of product(s) that can be obtained is the limiting reactant. To identify the limiting reactant, calculate the number of moles of each reactant present and compare this ratio to the mole ratio of the reactants in the balanced chemical equation.
Learn more about Limiting Reactant(s) here
https://brainly.com/question/14225536
#SPJ2
What chemicals would be needed to create a mint that actually cleaned teeth while offering flavors and consumable chemicals? I'd like multiple responses.
Answers
Answer:
ddddddddddddddddddddddddddddddddddddddddddddddddd
Explanation:
The Sun is a constant supply of energy to Earth.
A. True
B. False
Answers
The sun gives the earth thermal energy, which warmth the planet and effects the weather and the seasons. Also the sun is the beginning of the food chain, because it allows for plants to grow.
We also get our energy either directly or in directly from the sun, either from our food that we eat, or through things like the burning of fossil fuels, which was once plant-matter millions of years ago.
