The heat of hydration is defined as the heat absorbed or evolved when one mole of a substance undergoes hydration. The heat of solution is the enthalpy change associated with he dissolution of a solute. The lattice energy is the heat. Lattice energy is the energy released when the components of the lattice are brought together from infinity.
Hence the heat of solution for LiF → Li^+ + F- is -1966 kJ/mol
Given that;
Heat of hydration = ΔH solution – ΔH lattice energy
Where,
ΔH solution = Heat of the solution
ΔH lattice energy = Lattice energy of the solution
The heat of solution or enthalpy of dissolution is defined as the enthalpy change associated with the dissolution of a solute in a solvent
From the formula above;
ΔH solution = Heat of hydration + ΔH lattice energy
Heat of hydration = [(-431) + (-499)] = -930 kJ/mol
ΔH solution = (-930) + (-1,036) = -1966 kJ/mol
Hence the heat of solution for LiF → Li^+ + F- is -1966 kJ/mol
https://brainly.com/question/13526282
Cho các dung dịch: Glucozơ, glixerol, fomanđehit, etanol. Có thể dùng thuốc thử nào sau đây để phân biệt được cả 4 dung dịch trên?
A. Cu(OH)2; B. Dung dịch AgNO3 trong NH3;
C. Na kim loại; D. Nước brom.
Xem thêm tại: https://loigiaihay.com/bai-2-trang-25-sgk-hoa-hoc-12-c55a8069.html#ixzz71KH6guhm
Answer:
chắc là câu B í
Explanation:
Which among the following mixtures will show tyndal effect?
i) copper sulphate solution
ii) sand in water.
iii) milk.
iv) starch solution
Answer:
milk and starch solution are the colloids, hence these will show the tyndall effect
Answer:
milk and starch solution
Explanation:
Tyndall effect is shown by colloidal solutions. It is not shown by true solutions or suspensions.
Milk and starch solution are colloidal solutions. They show tyndall effect. On the other hand, common salt and copper sulphate solution are true solutions. They do not show tyndall effect.
Describe weighted average
Answer:
Explained below
Explanation:
In simple average, we just add all the given data variables and divide it by the number of data given.
However, when it comes to weighted average, what we do is that we multiply each given variable by their weights and then divide the sum of that by the sum of the weights.
Thus, if the variables are denoted by x and their weights are denoted by y, then we have;
Weighted average = Σ(xy)/Σy
Select the structure corresponding to trans-3-octene.
Answer: B
Explanation:
Answer:
The Correct Answer Is B.
A sample of gas has a volume of 20 cm³.The pressure is changed to 90 kPa at constant temperature,while the volume increases to 75 cm³.What was the original pressure of the gas?
Answer:
337.5kPa ~ 338kPa
Explanation:
Using the ideal gas law PV=nRT we have the following definitions from the problem:
V(initial) = 20cm³
P(initial) = ?kPa
V(final) = 75cm³
P(final) = 90kPa
Since we know that the number of moles of the sample did not change, nor did the temperature, nor does the ideal gas constant (R) we can rewrite this equation to state:
P(initial)V(initial) = nRT =P(final)V(final) ~ P(initial)V(initial) = P(final)V(final)
Rearranging this equation as we are solving for the initial pressure we find that:
P(initial) = (P(final)V(final))/V(initial)
P(initial) = ((90kPa)(75cm³))/20cm³
P(initial) = 337.5kPa ~ 338kPA
help me please I will mark as brainliest for the first correct answer
Answer:
1. 3-methylpentane
2. 2-bromo-3-chloropentane
3. 2,2,4-trimethylpentane
Explanation:
1. CH3CH2CH(CH3)CH2CH3.
Methyl group is in the third carbon atom in the long chain. The organic compound has five(5) carbon atoms thus it is named as pentane.
Therefore the name of the compound is
3-methylpentane
2. CH3CH(Br)CH(Cl)CH2CH3
The compound has Chlorine and Bromine in the carbon chain. Chlorine is given as chloro-, Bromine is given as bromo, depending on the position in the carbon chain. Bromine is located in 2 carbon atom and chlorine is in third(3) carbon atom in the long chain. The long chain has five carbon atoms thus pentane.
Naming of the compound we begin with the on lowest in the alphabet. The name of the organic compound is therefore;
2-bromo-3-chloropentane
3. CH3CH(CH3)3CH(CH3)CH2CH3
In this long chained organic compound, methyl-group is found in 2,2 and 4th positions. Since this is still pentane, naming the organic compounds, we start with the one with the lowest carbon. Therefore this becomes;
2,2,4-trimethylpentane
I hope this helps you to know how to name the organic compounds.
How much water will the measuring cup have if you poured 1/2 of it out?
write any two conditions at which a body of certain mass weightless
Answer:
A body becomes weightless in a zero-gravity scenario and when a force is applied to a body that is equal and opposite to the force of gravity. If the body is falling only under the influence of gravity.
Answer:
A body becomes weightless in a zero-gravity scenario and when a force is applied to a body that is equal and opposite to the force of gravity.If the body is falling only under the influence of gravity.
In the figure a cyclist moves A to B and then to C.he could also go through the shortest path AC. Depending on this fact solve the following questions: Find the length of AC .Find the displacement and total distance covered.
Answer:
hope it helps you see the attachment for further information
Re-word this statement: Ionic Radii are changing as you move down the column because the atoms in lower rows have more energy levels, which makes the valence electrons farther from the nucleus, so it takes less energy for them to be pulled away.
The Ionic radii are changing as you move across a row because each element has one more proton, which increases the attraction of the nucleus.
Answer:
ty po hehe
Explanation:
mark me as brainliest po thank you
In a chemical equation, the symbol that means "dissolved in water" is _____. (s) (l) (aq) (g)
How is a slump different from creep?
Answer:
Is this chemistry or ELA!
its not a question but i wanted to tell you guys that if you guyz like my answers then please don't forget to give like and follow at the same time. I am not forcing you to follow only if you guyz like my answer then like or follow. THANKS FOR READING..
Answer:
thank you for this oibnki
Answer:
Sure I'll go ahead and like your answers and follow you if that's what you wanted! :)
Explanation:
please help with the attached picture question 21, 22, 23
Explanation:
21. The given molecule for cracking is tetradecane.
On cracking it forms one mole of decane (C10H22) and two moles of ethene gas.
The chemical equation is shown below:
[tex]C_1_4H_3_0->C_1_0H_2_2+2C_2H_4[/tex]
22. The essential condition for the formation of an ester is the reaction of alcohol and acid in presence of concentrated sulfuric acid.
Thus among the given options, the first option is the correct one.
23. Isomers of butanol are shown below:
It is 2-butanol.
The position of -OH group changes to the second carbon.
difference between Nitrogen 1 oxide and Oxygen
Answer:
one atom of oxygen is not equal to oxygen
Can you help me on this. I will support your correct answer
The world is made up of
Answer:
Explanation:
The world is made up of living beings .
1.Which of the following forms only Ionic Bond?
1)Ca 2)C 3)Si 4)P
2.How many atoms of Na are present in 92 a.m.u of it?
a)4 b)5 c)6 d)7
The Answer is A)4 atoms of NA are present in 92 a.m.u
In Rutherford experiment some alpha particles fired at a gold foil bounced backward as a result of ... A.reflection from the surfaces of gold atoms B.electrostatic repulsion by gold nuclei C.electrostatic repulsion by electronsD.all of the aboveE.none of the above
Answer:
B.electrostatic repulsion by gold nuclei
Explanation:
According to Rutherford's experiment, a thin gold foil was bombarded with alpha particles. Some of the particles passed through the foil undeviated, some were scattered through large angles while some bounced backwards.
It follows that the particles that bounced backwards must have encountered a massive particle of like charge.
The atom is composed of a nucleus which contains positively charged particles. Some of the alpha particles which are positively charged particles bounced back when they encountered the positively charged particles in the nucleus.
Answer: The correct option is B (electrostatic repulsion by gold nuclei).
Explanation:
In the Rutherford's experiment, he used positively charged particles called alpha particles to bombard an atom in order to find out what is inside the atom. Together with two other scientists, Geiger and Marsden, they used a narrow beam of alpha particles emitted from a radioactive source to bombard a thin gold foil. The scattering of the particles from the gold foil was detected by a movable zinc sulphide screen which could be rotated to various positions around the foil.
Each time an alpha particle hit the screen, a visible flash of light or scintillation was produced. This was observed by a microscope attached to the screen. It was then observed that some of the particles followed a straight path through the gold foil while a few where scattered in a backward direction. This was as a result of electrostatic repulsion by gold nuclei which occurs due to the greater part of the mass of the atom was concentrated in a minute nucleus with positive charge.
Answer the following questions based on the above graph(Electron affinity vs Atomic no.)
i)Why on moving from Li to Be, the value of electron gain enthalpy drops.
ii)Cl has a higher peak than fluorine. Explain.
iii)Why Fluorine has the highest value among its period members.
i) Be has a fully filled 2s level.
ii) This is because chlorine is larger than fluorine.
iii) Fluorine needs only one electron to attain the octet configuration.
Electron affinity is the ability of an electron to accept gaseous electrons to yield gaseous ions with a negative charge.
Electron affinity depends on the size of an atom. Larger atoms have a higher electron affinity because they are better able to accept electrons.
The drop between Li and Be is because the 2s orbital in Be is already fully filled while Li has incompletely filled 2s level. electrons do not easily go into the higher energy 2p level.
The higher peak of chlorine is because chlorine is larger than fluorine hence the electron affinity of fluorine is less than that of chlorine. The smaller the ion the lesser the electron affinity.
Fluorine has the highest electron affinity in period 2 because it needs only one electron to attain the octet structure.
https://brainly.com/question/11755303
How the amount of acid rain caused by the burning of fossil fuels can be reduced ?
Answer:
The amount of acid rain caused by the burning of fossil fuels can be reduced by creating nitrogen oxides in the process of burning coal and other fossil fuels, some power plants are changing the way they burn coal. A great way to reduce acid rain is to produce energy without using fossil fuels. Instead, people can use renewable energy sources, such as solar and wind power.
What is the pressure in atm exerted by 1.8 g of H2 gas exert in a 4.3 L balloon at 27ºC? R = 0.821(L*atm) / (mol*K)
kakamc cjdismxsjxj xjcodmd xksowmd x
The pressure in atm exerted by 1.8 g of H₂ gas exert in a 4.3 L balloon at 27ºC is 5.12 atm
What is Ideal gas law ?The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).
Let's convert grams to moles (via molar mass).
Molar Mass (H₂) : 2 (1.008 g/mol)
Molar Mass (H₂) : 2.016 g/mol
1.8 grams H₂ 1 mole
---------------------- x ---------------------- = 0.893 moles H₂
2.016 grams
The Ideal Gas Law equation looks like this:
PV = nRT
In this equation,
P = pressure (atm) V = volume (L) n = moles R = Ideal Gas Constant (0.0821 L*atm/mol*K)T = temperature (K)After converting Celsius to Kelvin, you can put the given values into the equation and simplify to find the pressure.
P = ? atm R = 0.0821 L*atm/mol*K
V = 4.3 L T = 27 °C + 273.15 = 300.15 K
n = 0.893 moles
PV = nRT
P (4.3 L) = (0.893 moles) (0.0821 L*atm/mol*K)( 300.15 K)
P (4.3 L) = 22.0021
P = 5.12 atm
Therefore, The pressure in atm exerted by 1.8 g of H₂ gas exert in a 4.3 L balloon at 27ºC is 5.12 atm
Learn more about Ideal gas here ;
https://brainly.com/question/8711877
#SPJ2
If ya could change somethin bout ya previous science classes what would it be?
If I could change something in my previous science classes, it would have been the fact that I struggled in the question concerning exponents. It was simple one, but I don't know how I didn't understood that. For example, if there is a question with a calculation "xy²", then I would first multiply x and y, and then calculate the exponent. I did 3 of the questions wrong because of this, it was when I was in 7th grade. I wish I had not done this kind of silly mistake. I an in 10th grade and understand it well now, though.
What is the mass percent of a sodium fluoride solution prepared by dissolving 0.64 moles of sodium fluoride into 63.5 grams of water?
The mass percent of a sodium fluoride solution prepared by dissolving 0.64 moles of sodium fluoride into 63.5 grams of water is 29.7%.
What is mass percent ?Mass percent is a means to describe a component in a specific combination or to convey a concentration. The mass percentage used to describe the solution composition indicates the mass of solute contained in a given mass of solution.
To determine the mass percent of an element in a compound, we divide the mass of the element in one mole of the compound by the compound's molar mass and multiply the result by 100.
Given:
Number of moles = 0.64 moles
Moles of sodium fluoride = Given mass/molar mass
0.64 moles = Mass / 42
Mass = 26.88gram
Mass % = Mass of solute/ mass of solution × 100
= 26.88/90.48 × 100
= 29.7 %
Thus, 29.7 % is the mass percent of a sodium fluoride solution prepared by dissolving 0.64 moles of sodium fluoride into 63.5 grams of water
To learn more about the mass percent, follow the link;
https://brainly.com/question/5394922
#SPJ6
what do you mean by 1 joule work
Answer:
Joule is the SI unit of work. 1 Joule is amount of work done when a force of 1 Newton displaces a body through a distance of 1m in the direction of the force applied.
the text of oxygen gas in the laboratory
Explanation:in testing for oxygen a glowing splint is used.
the glowing splint is brought in the presence of the test tube containing the gas
the glowing splint rekindles or lights up showing that oxygen is present.
this is a positive test because oxygen supports burning or combustion
Specific heat capacity is _____.
greater for metal than for wood
the amount of heat required to raise the temperature of 1g of a substance 1 oC
represented by the symbol, Q
all of these
Answer:
all of this
Explanation:
Please help with the Volume one
Answer:
im a just achild
Explanation:
Answer:
c
Explanation:
0.5dm³
follow me if you want
High-pressure liquid chromatography (HPLC) is a method used in chemistry and biochemistry to
purify chemical substances. The pressures used in this procedure range from around 500
kilopascals (500,000 Pa) to about 60,000 kPa (60,000,000 Pa). It is often convenient to know
the pressure in torr. If an HPLC procedure is running at a pressure of 3.20x10^8 Pa , what is its
running pressure in torr?
Express the pressure numerically in torr.
►
3.20 x 10^8 Pa = _____ torr
Answer:
2,400,000 torr (3 s.f.)
Explanation:
Convert the pressure from Pascal to atm first:
[tex]\boxed{1 \: atm = 101325 \:Pa }[/tex]
3.20 ×10⁸ Pa
= [(3.20 ×10⁸) ÷101325] atm
= 3158.2 atm (5 s.f.)
Convert atm to torr:
[tex]\boxed{1 \: atm = 760 \: torr}[/tex]
3158.2 atm
= (3158.2 ×760) torr
= 2400000 torr (3 s.f.)
. De las siguientes soluciones:
1. 20 ml de alcohol etílico mezcladas con 80 ml de agua.
2. 500 ml de agua con 20 g de sal disueltas (V Sln: 500ml).
3. 80 g de sal en 2 litros de agua.
a) Identifica el soluto y solvente de cada solución y explica ¿por qué?
b) Encuentra la concentración por peso de la solución número 3 c) Entre la disolución 2 y 3 ¿Cuál presenta mayor concentración?
por favor lo necesito para hoy ¡gracias!
Answer:
can u translate this to English? I might be able to help
a) Solution 1: Solute is ethyl alcohol, solvent is water. Solution 2 and 3: Solute is salt, solvent is water.
b) Concentration by weight of solution 3: Approximately 3.85%.
c) Solution 3 has a higher concentration than solution 2.
a) Solutions and their solutes and solvents:
Solution 1: The solute is ethyl alcohol, and the solvent is water. This is because ethyl alcohol is the substance that dissolves in water to form the solution.
Solution 2: The solute is salt, and the solvent is water. Salt is the substance that dissolves in water to form the solution.
Solution 3: The solute is salt, and the solvent is water. Similar to solution 2, salt is the substance that dissolves in water to form the solution.
b) Weight concentration of solution number 3:
The weight concentration is calculated by dividing the mass of the solute (80 g of salt) by the total mass of the solution (80 g of salt + 2000 g of water):
Weight concentration = (80 g / 2080 g) * 100% ≈ 3.85%
c) Comparison of concentrations between solution 2 and 3:
Solution number 3 has a higher concentration than solution 2, as the weight concentration of solution 3 is approximately 3.85%, while the exact amount of water is not provided for solution 2 to calculate its concentration. However, solution 2 contains only 20 g of salt dissolved in 500 ml of water, which implies that the concentration will be lower than solution 3. Therefore, solution number 3 has a higher concentration compared to solution 2.
To learn more about Solutions, here
https://brainly.com/question/30665317
#SPJ2
