What is one Pascal pressure? What is its unit?​

Answers

Answer 1

Explanation:

the force acting perpendicularly on unit area of surface

unit=pascle .
Answer 2

A pressure of one Newton per square meter .. The SI unit of 1 Pascal pressure is 1 Newton per square metre .


Related Questions

You are trying to hold your 550 g physics books with your hand against a vertical wall. Using a force sensor you know that the force you are applying is 10.0 N. Below the book on the floor you have placed a motion sensor. The position time graph for the book is given. Find the coefficient of kinetic friction.

Answers

The book's position is changing linearly with time, so its velocity is constant. This means that the net force acting on the book in the direction parallel to the surface is

F = 10.0 N - n = 0

where n is the magnitude of the normal force on the book due to the wall, and the net force perpedicular to the surface is

F = f - (0.550 kg) g = 0

where f is the mag. of kinetic friction, and f = µn where µ is the coefficient of kinetic friction.

Then

n = 10.0 N

• f = (0.550 kg) g = 5.39 N

• 5.39 N = µ (10.0 N)

==>   µ = 0.539

Answer:

Above answer

Explanation:

The book's position is changing linearly with time, so its velocity is constant. This means that the net force acting on the book in the direction parallel to the surface is

∑ F = 10.0 N - n = 0

where n is the magnitude of the normal force on the book due to the wall, and the net force perpedicular to the surface is

∑ F = f - (0.550 kg) g = 0

where f is the mag. of kinetic friction, and f = µn where µ is the coefficient of kinetic friction.

Then

• n = 10.0 N

• f = (0.550 kg) g = 5.39 N

• 5.39 N = µ (10.0 N)

==>   µ = 0.539

Cuánto demorará un cuerpo en alcanzar su máxima altura, sabiendo que fue lanzado, verticalmente hacia arriba, con una velocidad cuyo valor fue de 90 m/s?

Answers

Answer:

The maximum height reached is 413.27 m.

Explanation:

How long will it take for a body to reach its maximum height, knowing that it was thrown, vertically upwards, with a velocity whose value was 90 m / s?

initial velocity , u = 90 m/s

gravity, g = 9.8 m/s^2

Let the maximum height is h.

At maximum height the velocity v = 0

Use third equation of motion

[tex]v^2 = u^2 - 2 gh\\\\0 = 90\times 90 - 2 \times 9.8 \times h\\\\h = 413.27 m[/tex]

Pls help asap!!

A bucket contains hot water at 95°c. A man wants to bath with water at 40°c. What is the ratio of the mass of hot water to the mass of cold water that he needs.​

Answers

Answer:

55

Explanation:95-40=55

i hope i did the math right if i didnt please tell me

what is the source of energy​

Answers

Fossil Fuels is the largest source for energy

Hope this is what you were asking :)

Which statement describes why energy is released in a nuclear fission reaction based on mass-energy equivalence?

A. For large nuclei, the mass of the original nucleus is greater than the mass of the products.
B. For large nuclei, the mass of the original nucleus is less than the mass of the products.
C. For small nuclei, the binding energy of the lighter nuclei is greater than the binding energy of the heavier nucleus.
D. For small nuclei, the binding energy of the lighter nuclei is less than the binding energy of the heavier nucleus.

Answers

Answer:

A is the answer!

Explanation:

Edge 2021

Answer:

A

Explanation:

Edge

Which symbol and unit of measurement are used for electric current?
symbol. A, unit: 1
symbol: C, unit: A
symbol l; unit C
symbol: 1; unitA

Answers

Answer: Symbol is I and unit A

Explanation: A represents Amperes

HOPE THIS HELPS!!!!!!!!

Use the information below the answer the following 3 questions.

A 50 kg crate is being dragged across a floor by a force of 225 N at an angle of 40o from the horizontal. The crate is dragged a distance of 5.0 m and the frictional force is 60 N.



Question 2 (2 points)
Question 2 options:
The work done on the crate by the applied force is ___x102 Nm. (Give your answer with the correct number of sign digs and do not include units).
Question 3 (2 points)
Question 3 options:
The work done on the crate by the frictional force is -___x102 Nm. (Give your answer with the correct number of sign digs and do not include units).
Question 4 (2 points)
Question 4 options:
The net work done on the crate is ___x102 Nm. (Give your answer with the correct number of sign digs and do not include units).

Hint: Do not use rounded answers in subsequent calculations

Answers

Answer:

2. 8.62×10² Nm

3. 2.30×10² Nm

4. 6.32×10² Nm

Explanation:

2. Determination of the work done by the applied force.

Force (F) = 225 N

Distance (d) = 5 m

Angle (θ) = 40°

Workdone (Wd) =?

Wd = Fd × Cos θ

Wd = 225 × 5 × Cos 40

Wd = 8.62×10² Nm

3. Determination of the work done by the frictional force.

Frictional Force (Fբ) = 60 N

Distance (d) = 5 m

Angle (θ) = 40°

Workdone (Wd) =?

Wd = Fբd × Cos θ

Wd = 60 × 5 × Cos 40

Wd = 2.30×10² Nm

4. Determination of the net work done.

We'll begin by calculating the net force acting on the crate

Force applied (F) = 225 N

Frictional Force (Fբ) = 60 N

Net force (Fₙ) =?

Fₙ = F – Fբ

Fₙ = 225 – 60

Fₙ = 165 N

Finally, we shall determine the net Workdone. This can be obtained as follow:

Net force (Fₙ) = 165 N

Distance (d) = 5 m

Angle (θ) = 40°

Workdone (Wd) =?

Wd = Fₙd × Cos θ

Wd = 165 × 5 × Cos 40

Wd = 6.32×10² Nm

the direction of applied force has to be_____ to the distance in order to say work is done

Answers

Answer:

Explanation:

The direction of the applied force has to be parallel to the distance an object moved in order to say that work has been done.

Is a nanoliter greater then one liter?

Answers

No, a nanoliter is one billionth of one liter

Convertir 25 km/h a m/s

Answers

Answer:

6.9 m/s

Explanation:

1000m = 1km

3600s = 1hr

25000m/3600s

6.9m/s

Which of the following is evidence for continental drift?

Answers

They based their idea of continental drift on several lines of evidence: fit of the continents, paleoclimate indicators, truncated geologic features, and fossils.

un litro de un gas es calentado a presión constante desde 20°C hasta 60°C que volumen final ocupará dicho gas? ​

Answers

Answer:

Final volume, V2 = 3 Litres

Explanation:

Given the following data;

Initial volume, V1 = 1 litre

Initial temperature, T1 = 20°C

Final temperature, T2 = 60°C

To find the final volume, we would use Charles' law;

Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.

Mathematically, Charles is given by;

V1/T1 = V2/T2

Making V2 as the subject formula, we have;

V1T2 = V2T1

V2 = (V1T2)/T1

Substituting into the formula, we have;

V2 = (1 * 60)/20

V2 = 60/20

Final volume, V2 = 3 Litres

write the relation of m² with its a multiple​

Answers

Explanation:

The square meter is the SI-derived unit of area. It has a symbol m² (33A1 in Unicode). It is defined as the area of a square whose sides measure exactly one metre.

Kevin used a pulley to lift a piano to the third floor of his apartment. His input work was 12,000 J and the output work was 10,000 J. What was the mechanical efficiency of the pulley?

A . 50%
B. 83.3%
C . 120%
D. 16.7%

Answers

Answer:

B

Explanation:

Eff = output work/input work ×100

Hence, Eff = 10000/12000 × 100

Eff = 83.3%

A pendulum of mass 18 kg is released from rest at some height, as shown by
point A in the image below. At the bottom of its arc at point B, it is traveling at
a speed of 17 m/s. What is the approximate amount of energy that has been
lost due to friction and air resistance? (Recall that a=98 m/s2

Answers

By the work-energy theorem, the total work done on the mass as it swings is

W = ∆K = 1/2 (18 kg) (17 m/s)² = 153 J

No work is done by the tension in the string, since it's directed perpendicular to the mass at every point in the arc. Similarly, the component of the mass's weight mg pointing perpendicular to the arc also performs no work.

If we ignore friction/drag for the moment, the only remaining force is the parallel component of weight, which performs mgh = (176.4 N) h of work, where h is the vertical distance between points A and B.

Now, if w is the amount of work done by friction/air resistance, then

(176.4 N) h - w = 153 J

If you know the starting height h, then you can solve for w.

For saving lives, what is the most important safety feature on a car? A. Air bag B. Safety Belt C. Anti-lock brakes

Answers

i'd imagine the answer is safety belt, but i don't have anything to back that up with

For saving lives  the most important safety feature on a car is B. Safety Belt

What are safety features of  a car ?

Safety features of  a car is a feature of a product designed to ensure or increase safety.

Air bag and Anti-lock brakes are the supplemental protection and designed to work best with combination with seat bells.

Air bag reduce the chance that upper body or head will strike the vehicle's interior during a crash alongside with belt that will  also hold your upper body

so, the primary safety feature is seat belt and Air bag and Anti-lock brakes  comes in secondary safety feature  as they increases the safety and risk of getting an injury during any accident

correct answer is B. Safety Belt

learn more about Safety features

https://brainly.com/question/25820562?referrer=searchResults

#SPJ3

A parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor is connected in series to a 4.89 μF capacitor. This three‑capacitor combination is connected to a 15.5 V battery. Determine the charge on each capacitor.

Answers

Answer:

a. i. 35.96 μC  b. i. 11.98 μC ii. 24.04 μC

Explanation:

We need to find the total capacitance of the system C.

The total capacitance of the parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor is C' = 1.47 μF + 2.95 μF = 4.42 μF.

C' = 4.42 μF is in series with the 4.89 μF capacitor and for a series combination of capacitors, we have the total capacitance, C from

1/C = 1/4.42 μF + 1/4.89 μF

1/C = (4.42 μF + 4.89 μF)/(4.42 μF × 4.89 μF)

1/C = 9.31 μF/21.6138 μF²

C = 21.6138/9.31 μF

C = 2.32 μF

So, the total charge in the circuit Q = CV where C = total capacitance = 2.32 μF and v = voltage = 15.5 V

So, Q = CV

Q = 2.32 μF × 15.5 V

Q = 35.96 μC

i. The charge on the 4.89 μF capacitor

Since the 4.89 μF is in series with C', the total charge flowing i the circuit is the total charge in the 4.89 μF capacitor. So, its charge Q = 35.96 μC

b. The charge in the 1.47 μF and 2.95 μF capacitors.

To find the charge in the 4.89 μF and 2.95 μF capacitors, we need to find the voltage across the combined parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor. The voltage, V' across the 4.89 μF capacitor, since Q = CV', V' = Q/C = 35.96 μC/4.89 μF = 7.35 V

So, the voltage V" across the combined parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor, C' is V" = 15.5 V - V' (since V' + V" = 15.5 V).

So, V" = 15.5 V - V'

V" = 15.5 V - 7.35 V

V" = 8.15 V

i. The charge on the 1.47 μF capacitor

Using Q' = CV" where Q' = charge across capacitor, C = 1.47 μF and V" = 8.15 V.

So, Q' = CV"

Q' = 1.47 μF × 8.15 V

Q' = 11.98 μC

ii. The charge on the 2.95 μF capacitor

Using Q" = CV" where Q' = charge across capacitor, C = 2.95 μF and V" = 8.15 V.

So, Q" = CV"

Q" = 2.95 μF × 8.15 V

Q" = 24.04 μC

An ice-skater with a mass of 80kg is holding a bowling ball with a mass of 8 kg. Suppose that the skater tosses the bowling ball forward with a speed of 6 m/s. What is the skater's reactive velocity? Show all work.

Answers

Answer:

0.6 m/s

Explanation:

The details of the masses and velocities are;

The mass of the ice skater, m₁ = 80 kg

The mass of the ball, m₂ = 8 kg

The speed with which the skater tosses the ball forward, v₂ = 6 m/s

Therefore;

According to the principle of conservation of linear momentum, we have;

m₁·v₁ = m₂·v₂

Where;

v₁ = The skater's reactive velocity

Therefore, we get;

80 kg × v₁ = 8 kg × 6 m/s

v₁ = 8 kg × 6 m/s/(80 kg) = 0.6 m/s

The skater's reactive velocity, v₁ = 0.6 m/s.

A rectangular coil of wire, 22.0 cm by 35.0 cm and carrying a current of 1.40 A, is oriented with the plane of its loop perpendicular to a uniform 1.50-T magnetic field pointing into the plane of the loop. Let the loop be in x-y Cartesian plane so that the long and short sides of the loop are parallel to x- and y-axis, respectively. The loop center is at the origin of x-y Cartesian plane. Note that the magnetic field is in the direction of the negative z-axis.a. Calculate: (i) the net force that the magnetic field exerts on the coil; (ii) the torque about the z-axis that the magnetic field exerts on the coil.b. The plane of the coil is now rotated through +30º from its initial orientation (the x-y plane of the Cartesian coordinate system that remains the same). Calculate: (i) the net force that the magnetic field exerts on the coil; (ii) the torque about the rotation axis that the magnetic field exerts on the coil.

Answers

Answer:

a)  [tex]F_{net}=0[/tex]

b)  [tex]T=0[/tex]

Explanation:

From the question we are told that:

Dimensions:

[tex]L*B=22.0*35.0cm[/tex]

Current [tex]I=1.40A[/tex]

Magnetic field [tex]B=1.40[/tex]

Therefore

[tex]Area=L*B[/tex]

[tex]A=22.0*35.0cm[/tex]

[tex]A=770cm=>770*0^{-4}[/tex]

a)

Generally Force on Looping gives

[tex]F_1-F_2[/tex]

[tex]F_3=F_4[/tex]

Therefore

[tex]F_{net}=0[/tex]

b)

Generally the equation for Torque is mathematically given by

[tex]T=i*Asin \theta[/tex]

Since A and B are on opposite direction

[tex]\theta=180[/tex]

Therefore

[tex]T=1.40*770*10^{-4}sin 180[/tex]

[tex]T=0[/tex]

which is part of the convection cycle in earths atmosphere?

a. hot, denser air rises
b. cold, denser air rises
c. hot, less-dense air rises
d. cold, less-dense air falls

Answers

I believe it’s C. hot, less-dense air rises

I hope this helps !!!!!!!!

Which wave has the smallest amplitude?

Answers

Answer:

C. C

Explanation:

A wave can be defined as a disturbance in a medium that progressively transports energy from a source location to another location without the transportation of matter.

In Science, there are two (2) types of wave and these include;

I. Electromagnetic waves: it doesn't require a medium for its propagation and as such can travel through an empty space or vacuum. An example of an electromagnetic wave is light.

II. Mechanical waves: it requires a medium for its propagation and as such can't travel through an empty space or vacuum. An example of a mechanical wave is sound.

A crest can be defined as the highest (vertically) point on a waveform.

On a related note, a trough is the lowest (vertically) on a waveform.

An amplitude can be defined as a waveform that's measured from the center line (its origin or equilibrium position) to the bottom of a trough or top of a crest. Thus, the vertical axis (y-axis) is the amplitude of a waveform i.e it's measured vertically.

In this scenario, waveform C which is represented by a blue curvy line has the smallest amplitude in comparison with the other waveforms because it has the minimum height when measured from the origin.

In contrast, waveform A represented by a purple line has the highest amplitude because it has the maximum height when measured from the origin.

Mathematically, the amplitude of a wave is given by the formula;

x = Asin(ωt + ϕ)

Where;

x is displacement of the wave measured in meters.A is the amplitude.ω is the angular frequency measured in rad/s.t is the time period measured in seconds.ϕ is the phase angle.

Answer:

The answer is indeed D as the comment above suggests.

Explanation:

Simply put, wave D's highest point is closer to the line than all of the other high points of A, B and C

Which wave has the largest amplitude?
A.D
B.B
C.C
D.A

Answers

Answer:

D. A

General Formulas and Concepts:

Simple Harmonic Motion

Parts of a wave

PeriodAmplitudeWavelengthCrest/Trough

Explanation:

The amplitude is the distance from the horizon to either the crest or trough of a wave.

In layman's terms, it is how high the wave is.

The "highest" wave would be wave A.

∴ our answer is D.

Topic: AP Physics 1 Algebra-Based

Unit: SMH

Answer:

A (The wave)

Explanation:

Wave A

if the pelican in item 3 was traveling at the same speed but was only 2.7m above the water, how far would the fish travel horizontally before hitting the water?​

Answers

Answer:

5.66 m

Explanation:

From online sources, the speed in item 3 being referred to was discovered to be 7.62 m/s

Now, let's get the time of flight from one of Newton's equation of motion;

S = ut + ½gt²

Considering the vertical component, we have u = 0 m/s.

Thus;.

S = ½gt²

Plugging in the relevant values;

2.7 = ½ × 9.8 × t²

t² = 2.7/4.9

t = √(2.7/4.9)

t = 0.7423 s

Now, when we consider the horizontal component of the motion, we have;

S = vt

Where;

S is the distance the fish will travel horizontally before hitting the water.

v = 7.62 m/s

t = 0.7423

Thus

s = 7.62 × 0.7423

s ≈ 5.66 m

What is the relationship between electric field lines and equipotential lines that you observed in doing the lab

Answers

Answer:

Explained below

Explanation:

Generally speaking, we know in physics that Electric field lines are lines which usually start at positive charges and deflect away from them to terminate at the negative charges. Meanwhile Equipotential lines are lines that are used to connect points located on the same electric potential.

Finally, in conclusion, electric field lines are usually lines that go through in a perpendicular manner across every equipotential lines.

A stone is thrown vertically upwards with an initial velocity of 20m/sec. Find the maximum height ot reaches and the time taken by it to reach the height. (g=10m/s2)

plz short numerical ASAP​

Answers

Answer:

The height reached is 20m, The time taken to reach 20m is 2 seconds

Explanation:

Observing the equations of motion we can see that the following equation will be most helpful for this question.

[tex]v^{2} = u^{2} + 2as[/tex]

We are given initial velocity, u

We know that the stone will stop at its maximum height, so final velocity, v

Acceleration, a

And we are looking for the displacement (height reached), s

Substitute the values we are given into the equation

[tex]0^{2} = 20^{2} + 2(10)s[/tex]

Rearrange for s

[tex]0^{2} -20^{2} =20s[/tex]

[tex]-400=20s[/tex]

[tex]\frac{-400}{20} =s[/tex]

s = -20 (The negative is just showing direction, it can be ignored for now)

The height reached is 20m

Use a different equation to find the time taken

[tex]s = vt - \frac{1}{2} at^{2}[/tex]

Substitute in the values we have

[tex]-20=(0)t - \frac{1}{2} (10)t^{2}[/tex]

Rearrange for t

[tex]-20 =0 -5 t^{2}[/tex]

[tex]\frac{-20}{-5} =t^{2}[/tex]

[tex]4 = t^{2}[/tex]

t = 2s

The time taken to reach 20m is 2 seconds

HELP ASAP
A. 1.09 A
B. 1.20 A
C.0.910 A
D. 0.830 A

Answers

Answer:

The answer should be: 1.20 A

Explanation:

what is projectile motion​

Answers

[tex]\boxed{\large{\bold{\textbf{\textsf{{\color{blue}{Answer}}}}}}:)}[/tex]

[tex]\sf{\qquad{\qquad{\underline{\underline{ Projectile~motion }}}}}[/tex]

If an object is given an initial velocity in any direction and then allowed to travel freely under gravity only, it is called a projectile motion.

It is basically 3 types

horizontally projectile motion oblique projectile motion included plane projectile motion

The path followed by a projectile is called its trajectory.

Projectile motion is when an object moves in a bilaterally symmetrical, parabolic path.

The path that the object follows is called its trajectory.

Projectile motion only occurs when there is one force applied at the beginning, after which the only influence on the trajectory is that of gravity

A 25.0 kg probe fell freely with acceleration of 2.00 m/s^2 just before it landed on a distant planet. What is the weight of the space probe on that planet

Answers

Answer:

The weight of the probe is 50 Newtons

Explanation:

Newtons second law states that F = ma

Given the mass of 25kg, and the acceleration of 2m/s^2, we can substitute both values into the equation to find the weight force.

[tex]F = ma[/tex]

[tex]F = 25 * 2[/tex]

[tex]F = 50N[/tex]

The weight of the probe is 50 Newtons

Two astronomy students travel to South Dakota. One stands on Earth’s surface and enjoys some sunshine. At the same time, the other descends into a gold mine where neutrinos are detected, arriving in time to detect the creation of a new radioactive argon nucleus. Although the photon at the surface and the neutrinos in the mine arrive at the same time, they have had very different histories. Describe the differences.

Answers

Answer:

The photon takes millions of years to reach the Surface of the sun while the Neutrinos travelling at the speed of light reaches the surface of the sun in approximately 2 seconds

The Photon is million year old while the neutrino is just some minutes old as observed by the student .

Explanation:

Although The Photon ( sunshine from the sun's surface ) heating up the student standing on the Earth's surface and the neutrinos discovered by the other student inside the gold mine are both formed in the Sun's core.

The difference between both are

The photon takes millions of years to reach the Surface of the sun while the Neutrinos travelling at the speed of light reaches the surface of the sun in approximately 2 seconds

The Photon is million year old while the neutrino is just some minutes old as observed by the student .

Why is a flower not a good blackbody radiator?

Answers

Answer:

A flower emits only visible light

A flower reflects much of the light that hits it

Other Questions
Which of the graphs represent y=-x^2 Given a line segment that contains the points A,B, & C in order, if AB = x - 2, and BC = 2x + 6, and AC = 19, find x. 3. At 35 C, a sample of gas has a volume of 256 ml and a pressure of 720.torr. What would the volumebe if the temperature were changed to 22 C and the pressure to 1.25 atmospheres suppose the team wins ten of it's following remaining 18 games. What is it's winning percentage? Differentiate between skilled and semi-skilled human resources in a sentence? A triangular patch of grass in a park is bordered by walking paths. The longest path bordering the patch of grass measures 110 feet. The smallest path bordering the patch of grass measures 55 feet. The smallest angle formed by the paths bordering the patch of grass measures 29.What is the measure of the largest angle of the triangular patch of grass? Round your answer to the nearestdegree. Show all your work. Bob's Shoe Emporium sold 5,787 shoes in March. In April they sold 6,245 shoes. How many more shoes did they sell in April than in March? Explain how you got your answer. Appellate courts Group of answer choices are made up of judges only. will, on occasion, seat juries, but only when dealing with cases and controversies dealing with federal questions. are courts exclusively of original jurisdiction and, hence, seat juries as a matter of court to make determinations of fact in reaching verdicts. often seat juries to listen to new evidence being presented in criminal cases on appeal to their courts. seat a jury in criminal cases but never in civil matters. What does the Fifth Amendment say about trying someone twice for the same crime?A. It prevents a person from being tried twice for the same crime if the person is found guilty.B. It allows a grand jury to decide if a person found guilty can be tried twice for the same crime. C. It allows a judge to decide if a person found not guilty can be tried twice for the same crime. D. It prevents a person from being tried twice for the same crime if the person is found not guilty. Please Help!! much appreciated! :DFind the value of y. Which of the following is TRUE about the law of independent assortment?A.The homologous chromosomes are separated.B.The maternal chromosomes are not separated in one pole.C.The paternal chromosomes are not separated in one pole.D.All of the choices A newborn exhibits signs of respiratory distress due to the lack of surfactant. She has signs of low oxygen and high carbon dioxide.Explain why the lack of surfactant would result in respiratory distress. Furthermore, what type of acid-base disorder might she develop and how would her body compensate. Be detailed in your explanation and support your answer with facts from your textbook, research, and articles from scholarly journals. In addition, remember to add references in APA format to your posts to avoid plagiarism. 4((-1+2-3+4-5+6-7...+1000) A rectangular prism has a square base with edges measuring 8 inches each. Its volume is 768 cubic inches. Find the height and the surface area of the prism Cellular respiration is a mirror image of photosynthesis, meaning that the chemical reaction is the reverse. Below is the chemical reaction for photosynthesis. Which of the following would be the correct chemical reaction for cellular respiration? 6 CO2 + 6 H2O C6H12O6 + 6 O2 A. 6 CO2 + 6 H2O C6H12O6 + 6 O2 B. 6 CO2 + 6 H2O 6 CO2 + 6 H2O C. C6H12O6 + 6 O2 6 CO2 + 6 H2O D. C6H12O6 + 6 O2 C6H12O6 + 6 O2 A simple random sample is drawn from a normally distributed population. The value of which of the following will notknown for certain but can be inferred?o uo-xoson What can a writer do to surprise readers in a story?slow the story down and add more detailcreate a plot twist that affects the storys outcomespeed up the narrative progressionhave the story continue to progress at a predictable rate Help please I need 6 and 8 Select the correct answer.Which of these statements is true of dynamic design diagrams?A. They demonstrate objects.B. They demonstrate relationships.C. They demonstrate the behavior of system aspects.D. They include structure diagrams. which type of figurative language is illustrated in this sentence : He glided across the field like a snake.