Answer:
Microsoft PowerPoint is a powerful slide show presentation program. It is a standard component of the company's Microsoft Office suite software, and is bundled together with Word, Excel, and other office productivity tools. The program uses slides to convey information rich in multimedia.
hope it work️
Answer:
Microsoft PowerPoint is a presentation software which is used to make slideshow.
Explanation:
hope you like it
Does anyone know what type of Chromebook this is?
Answer: Its............ A Chromebook type of Chromebook...??
Explanation:
Ion know I aint a geek, geezer -_- (Thats a lie)
Consider a file system using the indexed allocation. The block size is 512 bytes and the pointer to a block takes 2 bytes. The largest file size that a one level indexed allocation method could handle is ___________ KB. Recall that 1KB is equal to 210 bytes. Answer -1 if there is no limit based on the provided information.
Answer:
128 KB
Explanation:
Given data :
The block size = 512 bytes
Block pointer size = 2 bytes
In an indexed allocation, a special block named Index Block contains all the pointers to the blocks that the file had occupied.
Therefore, the maximum number of block pointer in 1 block :
[tex]$=\frac{\text{block size}}{\text{pointer size}}$[/tex]
[tex]$=\frac{512}{2}$[/tex]
= 256
Thus, a block can hold maximum 256 pointers.
It is given the level of indexing is one. So,
Maximum size of the file = maximum number of block pointers in 1 file x block size
= 256 x 512
[tex]$=2^8 \times 2^9$[/tex]
[tex]$=2^{8+9}$[/tex]
[tex]$=2^{17}$[/tex]
[tex]$=2^7 \times 2^{10}$[/tex]
[tex]$=128 \times 2^{10}$[/tex]
= 128 KB (∵ 1 KB = [tex]2^{10} \ B[/tex] )
Therefore, the largest file that 1 level if indexed allocation method can handle is 128 KB.
Design an if-then statement ( or a flowchart with a single alternative decision structure that assigns 20 to the variable y and assigns 40 to the variable z if the variable x is greater than 100?
Answer:
The conditional statement and its flowchart can be defined as follows:
Explanation:
Conditional statement:
if x>100 Then //defining if that check x value greater than 100
y=20//holding value in the y variable
z=40//holding value in z variable
End if
In the early days of computer technology, which system was justified because data-processing personnel were in short supply, hardware and software were expensive, and only large organizations could afford computers
Answer:
Centralized Processing
Explanation:
Centralized processing was developed to process all of the data in a single computer, and since the first computers were stand-alone with all input and output devices in the same room, only the largest organizations could afford to use centralized processing.
Write a class named Pet, with should have the following data attributes:1._name (for the name of a pet.2._animalType (for the type of animal that a pet is. Example, values are "Dog","Cat" and "Bird")3._age (for the pet's age)The Pet class should have an __init__method that creates these attributes. It should also have the following methods:-setName -This method assigns a value to the_name field-setAnimalType - This method assigns a value to the __animalType field-setAge -This method assigns a value to the __age field-getName -This method returns the value of the __name field-getAnimalType -This method returns the value of the __animalType field-getAge - This method returns the value of the __age fieldWrite a program that creates an object of the class and prompts the user to enter the name, type, and age of his or her pet. This should be stored as the object's attributes. Use the object's accessor methods to retrieve the pet's name, type and age and display this data on the screen. Also add an __str__ method to the class that will print the attributes in a readable format. In the main part of the program, create two more pet objects, assign values to the attirbutes and print all three objects using the print statement.Note: This program must be written using Python language
Answer:
Explanation:
The following is written in Python, it contains all of the necessary object attributes and methods as requested and creates the three objects to be printed to the screen. The first uses user input and the other two are pre-built as requested. The output can be seen in the attached image below.
class Pet:
_name = ''
_animalType = ''
_age = ''
def __init__(self, name, age, animalType):
self._name = name
self._age = age
self._animalType = animalType
def setName(self, name):
self._name = name
def setAnimalType(self, animalType):
self._animalType = animalType
def setAge(self, age):
self._age = age
def getName(self):
return self._name
def getAnimalType(self):
return self._animalType
def getAge(self):
return self._age
def __str__(self):
print("My Pet's name: " + str(self.getName()))
print("My Pet's age: " + str(self.getAge()))
print("My Pet's type: " + str(self.getAnimalType()))
name = input('Enter Pet Name: ')
age = input('Enter Pet Age: ')
type = input('Enter Pet Type: ')
pet1 = Pet(name, age, type)
pet1.__str__()
pet2 = Pet("Sparky", 6, 'collie')
pet3 = Pet('lucky', 4, 'ferret')
pet2.__str__()
pet3.__str__()
Explain briefly the FIREWALLS
Answer:
Think of a firewall as your own personal security guard. The firewall will block unapproved websites from talking to your computer and will stop your computer from talking to unapproved/unnecessary websites. Hope this helps!
Explanation:
Write a function called reverse Return that is almost the same job as reverse, but instead of printing the letters straight to the screen, it returns a String in which the letters have been reversed. The function call would look like:
Answer:
The function in Python is as follows:
def reverse(inputstr):
outputstr = ""
for i in inputstr:
outputstr = i + outputstr
return outputstr
Explanation:
This defines the function
def reverse(inputstr):
This initializes the output string
outputstr = ""
This iterates through the input string
for i in inputstr:
This generates the output string by reversing the input string
outputstr = i + outputstr
This returns the reversed string
return outputstr
21
22
23
24
25
26
27
28
29
30
TIME REMA
01:08:
Which view is most often used to reorder slides in a presentation that has already been created?
HERE
ОО
Outline view
Slide Sorter view
O Reading view
O Normal view
Answer:
slide sorter view
Explanation:
Explanation: while you can use 3/4 of these options to reorder slides, it is more common to use slide sorter view.
Slide sorter view. while you can use 3/4 of these options to reorder slides, it is more common to use slide sorter view.
What is Slide sorter view?
You can see and sort the presentation slides in PowerPoint using the Slide Sorter view. Click the "Slide Sorter" button in the presentation view buttons in the Status Bar to enter the Slide Sorter view.
The presentation slides can be added to, removed from, and copied using the Slide Sorter view. The visual flow of the presentation is also displayed in PowerPoint's Slide Sorter view. Additionally, you may add and observe a slide transition animation here.
All of the presentation slides in PowerPoint's Slide Sorter mode are displayed as thumbnails. The slide's content cannot be changed in this view. However, many of the functions available in the PowerPoint Slide Sorter view
Therefore, Slide sorter view. while you can use 3/4 of these options to reorder slides, it is more common to use slide sorter view.
To learn more slide sorter view, refer to the link:
https://brainly.com/question/7696377
#SPJ7
A method named 'withdraw' in the CheckingAccount class throws a custom exception named 'OverdrawnException'. You want to scan in the value of the withdrawal amount from a file, and you need to make sure that the scanner is closed whether the withdrawal is successful or not. Fill in the blank to complete the code below to do that.
Scamner sconfiLe -muil: try t scanFile new Scanner(myFile); myAccount.withdrow(scanFile.nextDouble)); System.out.println(oe.getMessageC); if (scanFile! null) catch (OverdrawnException oe) f th all of
scanFile.close ():
}
}
Solution :
Scanner scanFile = null;
try {
scanFile = new Scanner(myFile);
myAccount.withdraw(scanFile.nextDouble());
} catch (OverdrawnException oe){
System.out.println(oe.getMessage());
} finally {
if (scanFile != null){
scanFile.close();
}
}
A wireless router is what kind of networking device?
Select one
a. End device
b. Intermediary device
c Peripheral Device
d. Connecting Device
Answer:
D, routers enable us to connect to the internet.
how can you explain that algorithm and flowchart are problem solving tools?
Answer:
Algorithm and flowchart are the powerful tools for learning programming. An algorithm is a step-by-step analysis of the process, while a flowchart explains the steps of a program in a graphical way. Algorithm and flowcharts helps to clarify all the steps for solving the problem.
five technology tools and their uses
Answer:
Electronic boards
Videoconferencing ability
Search engines
Cloud services
Computing softwares
Explanation:
Technology tools are used to simplify task bring ease, comfort as well as better satisfaction :
The use of electronic boards for teaching is an essential tool for students and educators alike as it provides great features aloowibg teachers to write and make drawings without hassle. This clear visual display goes a long way to aide student's understanding.
Videoconferencing breaks the barrier that distance and having to travel bring swhen it comes to learning. With this tools, students and educators can now organize classes without having to be physically present un the same class room.
Search engines : the means of finding solutions and hints to challenging and questions is key. With search engines, thousands of resources can now be assessed to help solve problems.
Cloud services : this provud s a store for keeping essential information for a very long time. Most interestingly. These documents and files can be assessed anywhere, at anytime using the computer.
Computing softwares : it often seems tune consuming and inefficient solving certain numerical problems, technology now p ovide software to handles this calculation and provides solutions in no time using embedded dded to codes which only require inputs.
Write a program that reads a string and outputs the number of times each lowercase vowel appears in it. Your program must contain a function with one of its parameters as a string variable and return the number of times each lowercase vowel appears in it. Also write a program to test your function. (Note that if str is a variable of type string, then str.at(i) returns the character at the ith position. The position of the first character is 0. Also, str.length() returns the length of the str, that is, the number of characters in str.)
Answer:
Here the code is given as follows,
Explanation:
#include <iostream>
#include <string>
using namespace std;
void Vowels(string userString);
int main()
{
string userString;
//to get string from user
cout << "Please enter a string: ";
getline(cin,userString,'\n');
Vowels(userString);
return 0;
}
void Vowels(string userString)
{
char currentChar;
//variables to hold the number of instances of each vowel
int a = 0, e = 0, i = 0, o = 0, u = 0;
for (int x = 0; x < userString.length(); x++)
{
currentChar = userString.at(x);
switch (currentChar)
{
case 'a':
a += 1;
break;
case 'e':
e += 1;
break;
case 'i':
i += 1;
break;
case 'o':
o += 1;
break;
case 'u':
u += 1;
break;
default:
break;
}
}
// to print no of times a vowels appears in the string
cout << "Out of the " << userString.length() << " characters you entered." << endl;
cout << "Letter a = " << a << " times" << endl;
cout << "Letter e = " << e << " times" << endl;
cout << "Letter i = " << i << " times" << endl;
cout << "Letter o = " << o << " times" << endl;
cout << "Letter u = " << u << " times" << endl;
}
Hence the code and Output.
Please enter a string
Out of the 16 characters you entered.
Letter a = 2 times
Letter e = 1 times
Letter i = 0 times
Letter o = 1 times
Letter u = 0 times.
tools used to type text on Ms paint
An electronic ____ is an application you use to perform numeric calculations and to analyze and present numeric data.
An electronic [tex]\sf\purple{spreadsheet}[/tex] is an application you use to perform numeric calculations and to analyze and present numeric data.
[tex]\bold{ \green{ \star{ \orange{Mystique35}}}}⋆[/tex]
An electronic spreadsheet is an application you use to perform numeric calculations and to analyze and present numeric data.
What is electronic spreadsheet?You may examine and show numerical data as well as execute numerical calculations using an electronic spreadsheet.
Microsoft Excel, Sheets, and Apple Numbers are a few examples of electronic spreadsheets.
Text, number, logical, and error data are the four categories of data. Each type can be used for a variety of tasks, so knowing which to use and when to use it is crucial.
You might also keep in mind that while exporting data into a spreadsheet, some data types might change.
You may examine and show numerical data as well as execute numerical calculations using an electronic spreadsheet.
Thus, the answer is electronic spreadsheet.
For more details regarding spreadsheet, visit:
https://brainly.com/question/8284022
#SPJ6
Challenge: What is the largest decimal value you can represent, using a 129-bit unsigned integer?
Answer:
680564733841876926926749214863536422911
Explanation:
2¹²⁹ - 1 = 680564733841876926926749214863536422911
What help in executing commands quickly
Answer:99
Explanation: Last summer, my family and I took a trip to Jamaica. My favorite part of the trip was when we went to a place called the Luminous Lagoon. We ate dinner and waited for the sun to go down. Then we boarded a boat and went out into the lagoon. That’s when the magic started.
At first we could not see very much in the darkness except for the stars in the sky. After a few minutes, however, I noticed some fish swimming in the water. They didn’t look like ordinary fish. These fish were glowing! Our guide explained that the glow came from tiny creatures in the water called dinoflagellates. These little animals are not visible to us, but their bodies produce light using something called bioluminescence, just like fireflies. There are so many of these creatures in Luminous Lagoon that the water around them seems to glow.
After our guide explained these facts to us, he told us to put our hands in the water. I was not sure if it would work, but I tried it. When I did, my hand looked like it belonged to a superhero! It was glowing bright blue. I hope someday I get to return to the Luminous Lagoon. The lights in the water were much more entertaining than the ones in the sky.
Problem:
audio
The Greek prefix dinos- means “whirling” and the Latin root word flagellum means “whip”. What does dinoflagellate most likely mean as it is used in the passage?
audio
the production of light from an organism’s body
audio
the study of creatures that live in the ocean
audio
to move around underwater water like a fish
audio
an organism with a whip-like part it uses to move around in the water
What are the steps in finding the average height? Plz help ty :>
(Problem-solving questions
Use the problem-solving steps to develop an algorithm to solve the following problem
...Calculating the average height of all the children in your class)
Answer:
to calculate average, first add all the figures. Then divide by the amount of figures there are
Write a public static method named print Array, that takes two arguments. The first argument is an Array of int and the second argument is a String. The method should print out a list of the values in the array, each separated by the value of the second argument.
For example, given the following Array declaration and instantiation:
int[] myArray = {1, 22, 333, 400, 5005, 9}; printArray(myArray, ", ") will print out 1, 22, 333, 400, 5005, 9
printArray(myArray, " - ") will print out 1 - 22 - 333 - 400 - 5005 - 9
Answer:
Here is the output.
Explanation:
import java.util.Arrays;
public class Main{
public static void main(String[] args){
int[] array={43,42,23,42,4,56,36,7,8,676,54};
System.out.println(Arrays.toString(array));
printArray(array,"*");
System.out.println(""+getFirst(array));
System.out.println(""+getLast(array));
System.out.println(Arrays.toString(getAllButFirst(array)));
System.out.println(""+getIndexOfMin(array));
System.out.println(""+getIndexOfMax(array));
System.out.println(Arrays.toString(swapByIndex(array, 1,2)));
System.out.println(Arrays.toString(removeAtIndex(array,3)));
System.out.println(Arrays.toString(insertAtIndex(array,3,65)));
}
//---1----
public static void printArray(int[] arr, String sep){
for(int i=0; i<arr.length-1;i++){
System.out.print(" "+arr[i]+" "+sep);
}
System.out.println(" "+arr[arr.length-1]);
}
//---2----
public static int getFirst(int[] arr){
return arr[0];
}
//---3----
public static int getLast(int[] arr){
return arr[arr.length-1];
}
//---4-----
public static int[] getAllButFirst(int[] arr){
int[] anotherArray=new int[arr.length-1];
for(int i=1; i<arr.length;i++){
anotherArray[i-1]=arr[i];
}
return anotherArray;
}
//---5------
public static int getIndexOfMin(int[] arr){
int index=0;
int min=arr[0];
for(int i=1; i<arr.length;i++){
if(min>arr[i]){
min=arr[i];
index=i;
}
}
return index;
}
//---6------
public static int getIndexOfMax(int[] arr){
int index=0;
int max=arr[0];
for(int i=1; i<arr.length;i++){
if(max<arr[i]){
max=arr[i];
index=i;
}
}
return index;
}
//---7------
public static int[] swapByIndex(int[] arr, int a , int b){
int temp=arr[a];
arr[a]=arr[b];
arr[b]=temp;
return arr;
}
//---8------
public static int[] removeAtIndex(int[] arr, int index){
int[] anotherArray = new int[arr.length - 1];
for (int i = 0, k = 0; i < arr.length; i++) {
if (i == index) {
continue;
}
anotherArray[k++] = arr[i];
}
// return the resultant array
return anotherArray;
}
//---9------
public static int[] insertAtIndex(int[] arr, int index, int element){
int[] anotherArray = new int[arr.length + 1];
for (int i = 0, k=0;k < arr.length+1; k++) {
if (k == index) {
anotherArray[k]=element;
continue;
}
anotherArray[k] = arr[i++];
}
// return the resultant array
return anotherArray;
}
//---10------
public static boolean isSorted(int[] arr){
for(int i=0; i<arr.length-1;i++){
if (arr[i+1]<arr[i]){
return false;
}
}
return true;
}
}
You issue a transmission from your workstation to the following socket on your LAN: 10.1.145:110. Assuming your network uses standard port designations, what Application layer protocol are you using
Answer:
POP
Explanation:
The application layer protocol that is been used here is POP, given that you issued a transmission to the socket on you LAN: 10.1.145:110. and you use a standard port designation
Reason:
110 ( port number ) represents a POP3 process that is always used in a TCP/IP network , and the socket address started with an IP address as well. hence we can say that the application layer protocol is POP
How laggy is you're game cause I even lag in offline games this is just a random question.
Answer: its bad
Explanation:
Answer:
Lagging in offline games suggests there is something wrong with the computer, not the internet. There are various speed tests you can use to determine the speed of your internet! One being https://www.speedtest.net/ which is a more well known and trusted site. Depending on how old your computer is or if it is a laptop not build for games can influence your gameplay experience greatly.
why stress testing is needed?
Answer:
To be able to test a product if it can withstand what it is supposed to before being released to the public for saftey reasons.
Answer:
Stress testing involves testing beyond normal operational capacity, often to a breaking point, to observe the results. Reasons can include:
Helps to determine breaking points or safe usage limits Helps to confirm mathematical model is accurate enough in predicting breaking points or safe usage limits Helps to confirm intended specifications are being met Helps to determine modes of failure (how exactly a system fails) Helps to test stable operation of a part or system outside standard usage Helps to determine the stability of the software.Stress testing, in general, should put computer hardware under exaggerated levels of stress to ensure stability when used in a normal environment.
Carla is assigning tasks to others and she needs to ensure that she is aware of their progress. Which option should
she choose?
O Send status report when I complete an assigned task
O Completed task color
O Set Quick Click flag
O Keep my task list updated with copies of tasks
Answer: Send status report when I complete an assigned task
Explanation:
In order to be aware of their progress, the option to choose is the "Send status report when I complete an assigned task".
To do this click on options on the tools menu, then click on task options. Then, after the keep updated copies of the assigned tasks on my task list has been selected in the check box, one will then select "Send status reports when the assigned tasks are completed".
what are the different steps while solving a problem using computer? explain
Explanation:
The following six steps must be followed to solve a problem using computer.
Problem Analysis.
Program Design - Algorithm, Flowchart and Pseudocode.
Coding.
Compilation and Execution.
Debugging and Testing.
Program Documentation.
Physical safeguards, also called logical safeguards, and are applied in the hardware and software of information systems.
a. True
b. False
Answer:
False
Explanation:
They are not applied in the hardware and software of information systems.
2. 5s is a Chinese principle adapted for use in the workplace.
True or False
Answer:
A. true
Explanation:
because 5s is the.................
Write a method that accepts a string as an argument and checks it for proper capitalization and punctuation. The method should determine if the string begins with an uppercase letter and ends with a punctuation mark. The method should return true if the string meets the criteria; otherwise it should return false .
Answer:
The method in Python is as follows:
def checkStr(strng):
if strng[0].isupper() and strng[-1] == "?":
return True
else:
return False
Explanation:
This defines the method
def checkStr(strng):
This checks if the first character i upper and if the last is "??
if strng[0].isupper() and strng[-1] == "?":
If the condition is true, the function returns true
return True
Else, it returns false
else:
return False
You're installing two new hard drives into your network attached storage device. Your director asks that they be put into a RAID solution that offers redundancy over performance. Which would you use?
a. RAID 0
b. RAID 1
c. RAID 5
d. RAID 6
e. RAID 10
Answer:
d. RAID 6
Explanation:
RAID is a data storage technology that combines multiple physical disk drive components into a single logical unit. The functions of RAID is to provide performance and redundancy.
RAID 0 provides data stripping but it does not offer data stripping.
RAID 1 increases performance to about 2x but it limits the disk capacity to about 50%
RAID 5 provides redundancy and increased perfomance but it is limited to small disk drive.
RAID 6 also provides redundancy but it slows performance
RAID 10 increases performance and data protection.
RAID 6 is the best drive that offers redundancy over performance.
If the code for JAVA is LCXC, what is the code for BASIC?
Answer:
DCUKE
Explanation:
Given that,
Code for JAVA = LCXC
To find,
Code for BASIC = ?
As we observe the pattern,
In "JAVA", every letter moved two-letter forward in their alphabetical order or we can say that every third alphabet of the given letter is used to make the code:
J + 2 = L
A + 2 = C
V + 2 = X
A + 2 = C
Similarly,
B + 2 = D
A + 2 = C
S + 2 = U
I + 2 = K
C + 2 = E
Thus, DCUKE is the code for BASIC.
The code for BASIC given the code for JAVA is; DCUKE
We are given the code for JAVA as LCXC
From that code for "JAVA", we see that every letter is moved forward two letters in their alphabetical order. This means
J = L because L comes after J and KA = C because C comes after A and BV = X because X comes after V and UA = C because C comes after A and BSimilarly for BASIC;
B = D because D comes after B and CA = C because C comes after A and BS = U because U comes after S and TI = K because K comes after I and JC = E because E comes after C and DThus, finally the code for BASIC is DCUKE
Read more about JAVA at; https://brainly.com/question/18554491
Exam Lesson Name: Introduction to Design Technology
Exam number. 700796RR
> Exam Guidelines
Exam Instructions
Question 8 of 20 :
Select the best answer for the question
8. Cycling through the design process to create several models that incrementally improve a solution is called what?
O A. Six Sigma
B. Success criteria
C. Just-in-time production
D. Iterative design
Mark for review (Will be highlighted on the review page)
Type here to search
O
Bi
S
Answer:
D. Iterative design
Explanation:
An iterative design can be defined as a cyclic process which typically involves prototyping, testing, evaluating or analyzing and refining of a product, so as to continually improve the product.
In an iterative design process, the following steps are adopted;
1. A prototype of the product is first created and tested by the manufacturer.
2. The product is then evaluated to check for any defect or flaw.
3. The defect or flaw is fixed through a refining process.
4. The previous steps are repeated incrementally until an improved version of the product is created.
Hence, cycling through the design process to create several models that incrementally improve a solution is called iterative design.
Answer:
Iterative Design
Explanation:
A. It seeks to figure what it defective
B. It reaffirms if all requirements are met to solve a problem
C. It's main goal was to avoid excess products that might not end up making sales in the near future
D. Making several revision on problems to take out an efficient solution
D makes the most sense here.
