Answer:
electron configuration is the distribution of electrons of an atom or molecule in atomic or molecular orbitals.
Balancing oxidation-reduction reactions
Mg+ N2—>Mg3N2
Answer:
[tex]{ \sf{3Mg_{(s)} + N_{2(g)} →Mg _{3}N_{2(s)}}}[/tex]
place the letters on the spectrum below from least scientific two more scientific A. All living things are composed of one or more cells. We know this because every living thing examined to date has
been found to be composed of one or more cells.
B. If you break a mirror, you will have seven years of bad luck.
C. The Earth is flat. Anybody can see that!
D. Taking Vitamin C prevents the common cold. Linus Pauling, the Nobel laureate who discovered the structure of
Vitamin C, says it does.
E. Humans have a soul. I believe this because it says so in the Bible. The soul is what separates us from animals.
F. The rate of acceleration of all falling objects on Earth is constant. Two spheres of identical diameter and volume are
dropped from the top of a building; one is made of steel, the other made of a plastic polymer. They both will accel-
crate at the same rate (32 ft/s) and hit the ground at the same time.
Answer: B, C, E, D, A, F
Explanation: It is a little difficult to assign a regid order to these statements. Much depends on one's definition of "more scientific." My thoughts:
B: Only in the movies
C: Flat Earthers still exist, but no one has ever fallen off the edge, that I'm aware of
E: I've had a few pets with souls. My cat has it in for me.
D: I met Linus Pauling twice - he was too enthusiastic with his vitamin C and did not critically evaluate the evidence, but he was far more correct than the Flat-Earthers.
A: Lots of good evidence, although it can also depend on the definition of "living," Is a virus "living?"
F: Yep, I've done it myself. Heavier object have more inertia - they are the couch potatoes of physics. They will take their own time to get moving.
during the interconversion of state of matter, mass undergoes and change? true or false
True.
The Mass Undergoes change only in ( Solid state to liquid state ) Ice Cube to Water .
Mass changes from mg to litre.
[tex]\huge\mathfrak\red{hope \: it \: helps}[/tex]
Which of the following statements correctly explains why the excretory system is different from the digestive system? (1 point)
The excretory system is different from the digestive system because it removes waste from the body by filtering water, which
includes mostly the by-products of metabolism.
The excretory system is different from the digestive system because it removes waste from the body by filtering urine, which
includes mostly the by-products of metabolism
The excretory system is different from the digestive system because it removes waste from the body by filtering food, which
includes mostly the by-products of metabolism. filtering food
SS
2
The excretory system is different from the digestive system because it removes waste from the body by filtering blood, which
o
includes mostly the by-products of metabolism
U.
Hey
Answer:
The excretory system removes waste from the body. remove waste from the blood. The digestive system breaks down the food you eat into nutrients that provide energy and building materials for cells. The digestive and excretory sytems work together to process the food that you eat.
GIVING 20 POINTS!! Apply Concepts Two chemists each plan an investigation in which they will combine hydrogen gas with chlorine gas to observe the chemical reactivity. The plans differ in that one will use 25 milligrams each of hydrogen and chlorine, and the other will use 1000 times this amount, i.e., 25 grams each of hydrogen and chlorine. Can the investigations reach similar conclusions about the reactivity of hydrogen with chlorine? Explain.
Answer:
Yes, the investigations will reach similar conclusions about the reactivity of H2 and Cl2
Explanation:
1. The law of multiple proportions says that when elements form compounds, the proportions of the elements in those chemical compounds can be expressed in small whole number ratios. This means that regardless of whether 1000 times more of the products are used, the reactivity of the products is established by the chemical reaction
2. The law of multiple proportions is an extension of the law of definite composition, which states that compounds will consist of defined ratios of elements.
3. A reaction with more reactants will need more care because more products are produced, which can be toxic
4. H2 and Cl2 reactivity does not depend on the quantities but the chemical properties of each compound
What series does the following compound belong to?
Answer:
B
Carboxylic acid
Explanation:
I'm not entirely sure, but this should be it
May someone help me with the answer to this question I’ve been stuck on it
Explanation:
No, that would be incorrect
Answer:
There arre two main parts of the atom, the nucleus and the orbital rings. The three subatomic particles are contained in each of these, the proton and neutron together in the nucleus and the electrons orbiting in the rings.
A. Identify the type of molecule shown in the drawing. (2 points)
Answer: 1) Caboxylic acid
2) Ether
3) Ester
4) Aldehyde
5) Amine
6) Alcohol
Explanation: The type of a molecule is based it's primary functional group.
https://en.wikipedia.org/wiki/Functional_group
The identities of the given molecules shown in the drawing are:
1) Carboxylic acid.
2) Ether
3) Ester
4) Ethane
5) Aldehyde
6) Amine
7) Alcohol
What are the organic compounds?Organic compounds are those compounds, which contain carbon-carbon and carbon-hydrogen bonds.
The five organic compounds are lipids, carbohydrates, protein, nucleotide, etc.
Thus, the correct option is 1) Carboxylic acid.
2) Ether
3) Ester
4) Ethane
5) Aldehyde
6) Amine
7) Alcohol
Learn more about organic compounds
https://brainly.com/question/5994723
#SPJ2
How to convert 104 Km to M
Answer:
m=104000
Explanation:
by 1km=1000m
104km=?
Now
104km=104×1000m
=104000m
Therefore,m=104000 ans
104 kilometers is equal to 104,000 meters.
A conversion factor is a ratio that shows how two different units of measurement relate to each other. You can convert a value from one unit to another by multiplying or dividing the original value by a conversion factor.
For example,
Since there are 1000 meters in a kilometer, we need to multiply the distance in kilometers by 1000 to convert it into meters.
So, to convert 104 kilometers to meters:
104 Km * 1000 = 104,000 meters
Therefore, 104 kilometers is equal to 104,000 meters.
Learn more about conversion factor, here:
https://brainly.com/question/30567263
#SPJ6
what evidence have you discovered to explain how the fossil record provides relative ages? use the words: mass extinction, superposition, fossils, and relative age
Answer:
Relative dating is based on the positions of fossils in rock layers. Lower layers were laid down earlier, so they are assumed to contain older fossils. This gives the fossil an approximate age in years. Absolute dating is often based on the amount of carbon-14 or other radioactive element that remains in a fossil up until extinction.
Relative dating is a method of dating where the geologic events are arranged and the rocks are left behind in a sequence. They function on the basis of the stratigraphy and don't provide us with actual numeric data.
It provides us with the relative ages such as mass extinction the fossils are superimposed. It is based on the position of fossils in the layers of the rocks.Learn more about the discoveries to explain how the fossil record.
brainly.com/question/22311467.
Density and Years: What do you know?Objectives: determine and compare density of pennies to assess composition. Procedure:1. Read the directions and create a data table accordingly.2. Place 15-20 pennies in order of consecutive dates. Find the mass of each penny and record.3. Find the volume of all 5 pennies by water displacement and record in your data table. Record the volume adding 5 more pennies at a time until you have measured them all (15-20).a. Find the average volume of 1 penny.4. Calculate the density of each penny and graph according to the year.5. If the density of copper is 8.96 g/cm3 what would the mass of a pure copper penny be?6. Draw a conclusion.7. How might this relate to a real world example?
Answer:I dunno
Explanation:it is the best thing I ever said in this app
A pan containing 20.0 grams of water was allowed to cool from a temperature of 95.0 °C. If the amount of heat released is 1,200 joules, what is the approximate final temperature of the water?
75 °C
78 °C
81 °C
87 °C
Answer:
81 °C
Explanation:
This is a calorimetry question so a few things you will need for this. The calorimetry equation q=mcΔT & the specific heat of water (4.2J/g•°C). Other definitions are:
q = heat added/released by a sample
m = mass of sample
c=specific heat of sample
ΔT = change in temperature
from here we can rearrange the equation to state:
q/(mc) = ΔT
1200J/((20.0g)(4.2J/g•°C)) = ΔT
14°C = ΔT
If the starting temperature was 95.0°C and we know that the temperature was cooled by 14°C then the final temperature of the water would be 81.
Answer:
C. 81 c
Explanation:
took the test :)
!!DUE TODAY, NEED HELP ASAP!!
A student measured the masses of some aluminum and copper cylinders of different volumes. The data is displayed below:
Aluminum: Copper:
Volume (mL)
Mass (g)
Volume (mL)
Mass (g)
3.7
9.99
1.8
16.02
6
16.2
2.3
20.47
8.5
22.99
3.5
31.15
10.74
29
4.2
37.38
15
40.5
5.8
51.62
On graph paper graph the data above on ONE graph. Use the graph paper so the longer side is your y-axis.
Use up the majority of the graph paper. Do not make a small graph!
Use a ruler/straight edge so you graph is neat.
You will need to plot the points for each substance and create a double line graph. When connecting your points for each substance, continue the lines past the plotted points.
Be sure to include a key to identify the substances.
Make your X-axis volume(mL) and your Y-axis mass(g)
Look at the numbers for both substances when creating your scales. You will most likely have a different scale for mass and volume. What is the lowest number? What is the highest number? What does it make sense to go by?
Calculate the density of each metal.
Aluminum:_________________________ Copper:________________________
What happens to the mass of the copper at the volume increases from 6 to 8mL?
Which sample is more dense? How does the graph show you this?
Answer: The data are not arranged in a useful pattern. I arranged them as best I could and made a graph in Excel for demonstration.
Explanation: The data are plotted with mass on the x axis and volume on the y. Add a key to identify the top line as CU and the bottom as Al.
The density of Cu is 8.9 g/ml and 2.70 for Al.
The mass of copper increases by 17.8 grams going from 6 to 8 ml. (8.9 g/ml)*(2 ml) = 17.8 grams.
Copper is more dense. c The graph shows that for the same volumes, copper has the higher mass.
give any two reasons that hydrogen is kept in group 1 in Modern Periodic Table
Answer:
Hydrogen is usually classified as a group 1 element since it has one valence electron, just like group 1 metals.
Explanation:
ASAP. Five stars + brainless.
A procedure calls for 4 parts reagent A to 16 parts water.What is the dilution of reagent A in water?
a) 4/16
b) 1/5
c) 1/4
d) 4/12
my guess answer iss 1/4 if incorrect sorr
1/5 is the dilution of reagent A in water.
Explanation:
The dilution factor of the diluted solution is determined by dividing the final volume of the diluted solution by the volume of the undiluted solution.[tex]D.F.=\frac{V_f}{V_i}[/tex]
Where:
D.F = Dilution factor
[tex]V_f[/tex] = Final volume of the diluted solution
[tex]V_i[/tex]= Initial volume of the undiluted solution
And the dilution is represented as 1 : D.F.Given:
4 parts of the reagent and 16 parts of water are mixed together to form a diluted solution.
To find:
The dilution of reagent A in water
Solution:
Parts of reagent A =[tex]V_i = 4[/tex]
Parts of water = 16
Final volume of solution = [tex]V _f = 4 + 16 = 20[/tex]
The dilution factor of reagent A:
[tex]D.F=\frac{20}{4}=5[/tex]
The dilution of the reagent A = [tex]1:5=\frac{1}{5}[/tex]
1/5 is the dilution of reagent A in water
Learn more about Dilution here:
brainly.com/question/9920151?referrer=searchResults
brainly.com/question/15213606?referrer=searchResults
Which is larger?
1). 1 liter or 1500 milliliters
2) 12 cm or 12 milliliters
Answer:
1). 1 litre
2).12 cm
Explanation:
In 1 litre = 1000 ml whereas 1500 milliliters equals 0.15 litres and it is same for 12 cm and 12 milliliters
What is the density of water (in g/mL) to fouf significant figures at 6°C?
Answer :
0.9999432 g/cm^3
The density of water in g/ml up to 4 significant figures at 6°C is 0.9999432 g/cm³.
What are significant figures?Significant figures are used for establishment of a number which is presented in the form of digits. These digits give a meaningful representation to the numbers.
The significant figures are the significant digits which convey the meaning according to the accuracy. These provide precision to the numbers and hence are called as significant numbers.There are rules for counting significant figures which are as follows:
1)All non-zero digits are significant .
2)All zeroes which occur between non-zero digits are significant.
3)All zeroes to the left and right of a non-zero digit are not significant.
4) All zeroes on right of decimal are significant if a non-zero number follows them.
5)All zeroes on right side of non-zero digit are significant
Learn more about significant figures,here:
https://brainly.com/question/29153641
#SPJ2
will mark brainliest if correct
Which methods separate a mixture according to the size of the particles?
a
filtration and chromatography
b
distillation and chromatography
c
filtration and evaporation
d
distillation and evaporation
Answer:
filtration and chromatography
Explanation:
I hope this will help you :-)
A hydrogen electron is elevated from level 1 to level 2. Another electron is elevated from level 2 to level
4. The transition requiring the greatest energy change is
DONE
Intro
Answer
level 2 to 4
Explanation:
i guessed cause im just that cool
Convert to standard notation.
9.3 x 10^-5
Answer:
9.3 x 10^ -5 in standard notation is 0.000093
Explanation:
Since 10 is raised to a -5, this means that there should be 5 zeros before the non-zero digits
Assertion : When the added electron goes to smaller n=3 quantum level, the electron-
electron repulsion is much less.
Reason: The added electron occupies a smaller region of space .
It is due to low volume of electron that causes large distance between two electrons.
When the added electron goes to smaller quantum level, the repulsive force between two electrons is less because the electron which is added occupies small space due to less volume so there is a large distance between two electrons that leads to less force of repulsion.
If the electron has more volume so it occupies more space and there will more repulsive force between two electrons so that's why we can say that the smaller volume of electron is the reason of less repulsive force.
https://brainly.com/question/24387646
English
M.
3.x - 9
2r-7
.X + 2
18
Answer:
it will come answer 21 write
. Arrange the following in order of increasing radius:
a) Mg2+, Na+, Al3+
b) Na+, Al3+ , Mg2+
c) Mg2+ , Al3+ , Na+
d) Al3+ , Mg2+, Na+
guys pls help i will venmo you money
Answer:
Al3+<Mg2+<Na+
Explanation:
this is because of nuclear charge (no. of protons)
atomic radius is inversely proportional to nuclear charge.
question : what are isotopes
Answer:
Isotopes are versions of the same element. They have the same number of protons and electrons as the element but different mass numbers and number of neutrons.
Explanation:
one of two or more species of atoms of a chemical element with the same atomic number and position in the periodic table.
Chewing food to break it down into smaller particles represents a physical change, but the charging of starch into sugars by enzymes in the digestive system represents a chemical change.Chemical or physical change?
Answer:
Chemical changeExplanation:
The charging of starch into sugars by enzymes in the digestive system shows a chemical change.[tex]\tt{ \green{P} \orange{s} \red{y} \blue{x} \pink{c} \purple{h} \green{i} e}[/tex]
Vapor pressure of any liquid _______. A. increases with increases in temperature B. increases with decreases in temperature C. is not affected by changes in temperature D. increases with increases in volume of the liquid E. None of the Above
Answer:
increase with increases in temperature
Explanation:
please mark me brainleast
