Answer:
a formula giving the number of atoms of each of the elements present in one molecule of a specific compound.
Answer ; try to understand in the explanation
Explanation: Molecular Formula Definition: An expression which states the number and type of atoms present in a molecule of a substance. Examples: There are 6 C atoms and 14 H atoms in a hexane molecule, which has a molecular formula of C6H14.
Struggling on this problem.
Answer:
4Al + 3O2 ----> 2Al2O3
Explanation:
first blank 4
second blank 3
third blank 2
Please somone help me with a chemistry question brainliest to whoever answers correctly and 20 points
Answer:
chlorine is larger so the symbol is <
Explanation:
What is the molarity if 60.4 grams of hydrochloric acid was added to 505 mL of water?
M
H - 1.0079 g/mol
Cl- 35.453 g/mol
Answer:
3.29 M
Explanation:
Molarity refers to the molar concentration of a solution and it can be calculated using the formula below:
Molarity (M) = number of moles (n) ÷ volume (V)
According to this question, the mass of HCl was given to be 60.4 grams and the volume of water as 505 mL.
Using mole = mass/molar mass to convert mass of HCl to moles
Molar mass of HCl = 1.0079 + 35.453 = 36.4609g/mol
mole = 60.4g ÷ 36.4609g/mol
mole = 1.66mol
Volume of water = 505mL = 505/1000 = 0.505L
Molarity, M = 1.66 ÷ 0.505
Molarity of HCl solution = 3.29 M
Método científico: El trabajo científico se caracteriza por ser planificado, con objetivos iniciales y que habitualmente se dan en un cierto orden.1) Indica cuáles son los pasos del método científico explicando brevemente cada uno de ellos.2) Los siguientes son dos modelos : *Un estudiante pensando en la competencia, desarrolla un proyecto en el sótano de su casa. *Un grupo de personas con diferentes aptitudes cooperan para resolver un problema. ¿Cuál de ellos es mejor para el trabajo científico? ¿Por qué?
Answer:
Ver explicación
Explanation:
El método científico se refiere al patrón establecido de resolución de un problema científico. Los siguientes son pasos importantes en el método científico;
Haz una observación.
formular preguntas relevantes.
elabore una hipótesis que pueda ser probada.
Diseña un experimento.
Prueba la hipótesis usando tu diseño experimental.
Teniendo en cuenta ambos escenarios, el último caso en el que estudiantes de diferentes capacidades trabajan juntos para resolver un problema refleja mejor el método científico porque pueden hacerse preguntas entre sí y llegar a hipótesis comprobables que pueden demostrarse como verdaderas o falsas mediante experimentos.
You are a NASCAR pit crew member. Your employer is leading the race with 20 laps to go. He just finished a pit stop and has 5.0 gallons of fuel in the tank. On the way out of the pits, he asks, "Am I going to have enough fuel to finish the race or am I going to have to make another pit stop?" You whip out your calculator and begin your calculations based on your knowledge of stoichiometry. Other information you know is: The car uses an average of 300.0 grams of O2 for each lap. The formula for fuel is C5H12. The fuel has a density of 700 g/gal. What do you tell the driver? (The density can be used as a conversion factor between grams and gallons)
Answer:
Since there are 3500 g of fuel left in the tank, and he needs only 1687.5 g to complete 20 laps, he has enough fuel to complete the race. I will tell the driver that he does not need to make another pit stop as he has enough fuel to complete the race.
Explanation:
Density = mass / volume
Density of fuel = 700 g/ 1 gal
Therefore, the mass of fuel in 1 gallon = 700 g
The driver has 5.0 gallons of fuel in the tank.
The mass of 5.0 gallons of fuel = 5 × 700 = 3500 g of fuel
Equation of the combustion of fuel, C₅H₁₂ is given below:
C₅H₁₂ + 8 O₂ ---> 6 H₂O + 5 CO₂
1 mole C₅H₁₂ requires 8 moles of O₂
1 mole of C₅H₁₂ has a mass = 72 g
8 moles of O₂ has a mass = 256 g
Therefore, 300 g of O₂ will require 300 × (72/256) g of C₅H₁₂ = 84.375 g of C₅H₁₂
84.375 g of fuel is used by the car per lap;
20 laps will require 20 × 84.375 g of fuel = 1687.5 g of fuel.
Since there are 3500 g of fuel left in the tank, and he needs only 1687.5 g to complete 20 laps, he has enough fuel to complete the race. I will tell the driver that he does not need to make another pit stop as he has enough fuel to complete the race.
How many Group 17 elements are in Period 3 of the Periodic Table? A) 1 B) 2 C) 3 D) 4
any of ya'll good at chemistry?????
Answer:
i good at chemistry
Explanation:
not all but i try
23. What type of chemical reaction is: CH, + 0→ CO2 + H20
a. Combustion
b. Neutralization
C. Synthesis
d. Double Replacement
Answer:
combustion
Explanation:
bsnszisb idiej jeiieyv
What is a natural disaster?
Answer:
Explanation:
A natural disaster is a major adverse event resulting from natural processes of the Earth; examples include floods, hurricanes, tornadoes, volcanic eruptions, earthquakes, tsunamis, storms, and other geologic processes
Answer:
A natural disaster is a natural, major harmful event resulting from natural processes of the Earth such as floods, earthquakes, or hurricanes, tornadoes, volcanic eruptions, tsunamis, storms, and other geologic processes that causes great damage or loss of life.
(04.03 MC)
The table shows the nature of the reactants and products formed in a certain type of chemical reaction.
Nature of Reactants and Products
Reactants
lonic compound + lonic compound
Products
lonic compound + lonic compound
Which of the following is true about this type of chemical reaction?
It is a single replacement reaction, and all four compounds are different.
It is a double replacement reaction, and all four compounds are different.
It is a single replacement reaction, and each compound has the same set of ions.
It is a double replacement reaction, and each compound has the same set of ions.
Answer: The given type of chemical reaction is a double replacement reaction, and each compound has the same set of ions.
Explanation:
When two different compounds chemically react with each other and their ions get exchanged with each other then it leads to the formation of two new compounds. This type of reaction is called double displacement reaction.
For example, [tex]KBr + AgNO_{3} \rightarrow KNO_{3} + AgBr(\downarrow)[/tex]
Here, both KBr and [tex]AgNO_{3}[/tex] are ionic compounds that leads to the formation of two new ionic compounds which are [tex]KNO_{3}[/tex] and AgBr.
Thus, we can conclude that the given type of chemical reaction is a double replacement reaction, and each compound has the same set of ions.
What is the term for the repeating pattern in a crystalline structure?
a) Repeating pattern
b) Base pattern
c) Unit cell
d) Primitive pattern
Answer:
Because a crystalline solid consists of repeating patterns of its components in three dimensions (a crystal lattice), we can represent the entire crystal by drawing the structure of the smallest identical units that, when stacked together, form the crystal. This basic repeating unit is called a unit cell.Aug 12, 2020
20. Show a correct numerical setup for calculating the molarity of the KOH * (aq) solution. Then state the calculated value of the molarity .
Answer:
[tex]M_b = \frac{0.10M * 9.50mL}{3.80mL}[/tex] ---- The setup
[tex]M_b = 0.25M[/tex] --- The molarity of KOH
Explanation:
Given
I will answer the question with the attached titration data
Required
The set and the value of the molarity of KOH
First, calculate the volume of acid (HCL) used:
[tex]V_a = Final\ Reading - Initial\ Reading[/tex]
[tex]V_a = 25.00mL - 15.50mL[/tex]
[tex]V_a = 9.50mL[/tex]
Calculate the final volume of base (KOH) used:
[tex]V_b = Final\ Reading - Initial\ Reading[/tex]
[tex]V_b = 8.80mL - 5.00mL[/tex]
[tex]V_b = 3.80mL[/tex]
The numerical setup is calculated using::
[tex]M_a * V_a = M_b * V_b[/tex]
Where
[tex]V_a = 9.50mL[/tex]
[tex]V_b = 3.80mL[/tex]
[tex]M_a = 0.10M[/tex] --- the given molarity of HCL
So, we have:
[tex]M_a * V_a = M_b * V_b[/tex]
[tex]0.10M * 9.50mL = M_b * 3.80mL[/tex]
Make Mb the subject
[tex]M_b = \frac{0.10M * 9.50mL}{3.80mL}[/tex] ---- The correct numerical setup
The solution is then calculated as:
[tex]M_b = \frac{0.10M * 9.50mL}{3.80mL}[/tex]
[tex]M_b = \frac{0.10 * 9.50}{3.80}M[/tex]
[tex]M_b = \frac{0.95}{3.80}M[/tex]
[tex]M_b = 0.25M[/tex]
A compound being used in experimental medicine is 78.14% boron (B) and 21.86% hydrogen (H). The empirical formula of the compound will have a boron to hydrogen ratio of
Explanation:
I did it step by step so It would be easier to understand:)
Which statement explains why catalysts are important for living
organisms? *
Catalysts increase the amount of product formed from limited reactants.
Catalysts cause gases to be produced at a slower rate, so cells don't burst.
Catalysts are used up during chemical reactions, so organisms must constantly make
new ones.
Catalysts allow chemical reactions to occur at temperatures at which the organism
lives.
Answer:
Catalysts allow chemical reactions to occur at temperatures at which the organism lives.
Explanation:
Catalysts are molecules that speeden the rate of chemical reaction by lowering the activation energy of the reaction. In a living system, the catalyst are ENZYMES, which help to hasten up many biochemical reactions.
Another function of catalyst in living systems is that it allows chemical reactions to occur at temperatures at which the organism lives.
existen mas de 10 millones de cmpuestos organicos o inorganicos
so dfhhdjdjjfjfjjdjdjdj
Balance the equation above please
Answer:
Balanced Equation:-Al2(CO3)3. ---heat---> Al2O3 + 3 CO2
Answer:
everything can be found in the picture
6. Which of the following represent kinetic energy? *
(1 Point)
the water behind a dam
O a boulder hug from a net over a pit
a calculator falling to the floor
the string on a bow before being released
Answer:
weter
Explanation:
Q.does salt make water boil at a higher temperature?
Answer:
Yes
Explanation:
The salt increases the boiling point, meaning it make water boil at a higher temperature, and it decreases the specific heat capacity, meaning it will heat up quick.
Valence electrons are important when drawing molecular structures because
a. They are closest to the nucleus of the atom and do not participate in chemical
bonding
b. They are closest to the nucleus of the atom and participate in chemical
bonding
c. They are farthest away from the nucleus of the atom and do not participate in
chemical bonding
d. They are farthest away from the nucleus of the atom and participate in
chemical bonding
Answer:
d
Explanation:
Valence electrons are in the outermost shell. They form chemical bonds with other elements, not any other electrons. Hope this helps!
Compare the following in the three states of matter
a) inter particle space
b)inter particle force of attraction
c)particle motion
Explanation:
Anything that occupies space and has mass is called matter.
(a) Inter particle space
Solids - Atoms of a solid substance are closely packed with each other due to which there is very less or no inter particle space.Liquids - Atoms of a liquid are little loosely packed due to which there is some inter particle space.Gases - Atoms of a gas are very loosely packed due to which there is large inter particle space.(b) Inter particle force of attraction
Solids - Atoms of a solid are attached to each other by strong force of attraction.Liquids - Atoms of a liquid have slightly less force of attraction as compared to a solid substance.Gases - Atoms of a gas have Vander waal forces. Hence, there is no inter particle force of attraction between atoms of a gas.(c) Particle motion
Solids - There is low or negligible particle motion between atoms of a solid.Liquids - There is high particle motion as compared to that present in a solid.Gases - There is very high particle motion as compared to solids and liquids._______ reach the surface first during an earthquake.
Rayleigh waves
P waves
Love waves
S waves
What is the uses of seawater as a source of renewable energy?
Explanation:
Desalination of seawater is considered a renewable source of water, although reducing its dependence on fossil fuel energy is needed for it to be fully renewable.
How many atoms are in 9.8 moles of NaCl?
Answer:
a lot but im pretty sure if u just take avogadros number and multiply it by 9.8 u get the answer
Explanation:
There are 5.89 × 10²⁴ atoms in 9.8 moles on NaCl. Details about number of atoms can be found below.
How to calculate number of atoms?The number of atoms of a compound can be calculated by multiplying the number of moles of the substance by Avogadro's number.
no of atoms = no of moles × 6.02 × 10²³
According to this question, there are 9.8 moles of NaCl.
no of atoms = 9.8 × 6.02 × 10²³
no of atoms = 5.896 × 10²⁴
Therefore, there are 5.89 × 10²⁴ atoms in 9.8 moles on NaCl.
Learn more about number of atoms at: https://brainly.com/question/8834373
#SPJ2
what is the state of matter that takes shape of a container???
Answer:
Liquid and gas is the matter that takes shape of a container
It can also be called fluid since fluid is distributed into liquid and gas
Explanation:
I hope that is enough for your answer, hope this will help
Which will boil faster distilled water or salt water and why?
Answer:
The distilled water will be boiled faster as it does not contain any non - volatile solute.
- The salty water contains different non - volatile salts in it.
- Due to the presence of these salts, its vapour pressure will be decreased and boiling point will be elevated.
- So, salty water will take more time to boil.
- On the other hand, distilled water does not have any such solute and due to this its vapour pressure will not be affected.
- Hence, it will boil fast than salty water.
This graph represents a population of molecules in a gas versus the distribution of the average velocity(speed) of its molecules in that population. Assume all molecules to be of the same mass. In reading the graph, it is important to note three things. One, is the most probable speed is at the peak of the curve. Secondly, the most probable speed increases as the temperature increases (so shift to the right), and the distribution broadens as it increases.
On the graph, indicate the average kinetic energy of the population.
Explain your answer.
What part of the graph indicates the temperature of the sample?
Explain your answer.
Sketch a curve that represents the distribution of molecules at a temperature below the one shown. Label it as T2. Describe both T and T2 in terms of their average kinetic energy. Be specific and detailed.
Submit your answer below.
Answer:
Part A
Given that the graph is symmetrical and bell shaped, the average kinetic energy is given by the midline of graph, which corresponds to the common speed of the highest number of the population
Part B
The formula for the average kinetic energy, K.E. = (3/2)·(R/NA)·T
Therefore, the part of the graph that indicates the temperature of the sample is the average kinetic energy. K.E.
Part C
At a lower temperature, the heat is less evenly distributed and we have the distribution T2 higher than T1
Please see the attached graph created with MS Visio
Explanation:
A presión de 3atm, 7L de un gas a temperatura constante experimenta un cambio ocupando un volumen de 0,5L ¿Cuál será la presión que ejerce? ayuda
Answer:
La presión que ejerce es 42 atm.
Explanation:
La ley de Boyle relaciona la presión y el volumen y dice que el volumen ocupado por una determinada masa gaseosa a temperatura constante, es inversamente proporcional a la presión.
La ley de Boyle se expresa matemáticamente como:
P*V=k
Ahora es posible suponer que tienes un cierto volumen de gas V1 que se encuentra a una presión P1 al comienzo del experimento. Si varias el volumen de gas hasta un nuevo valor V2, entonces la presión cambiará a P2, y se cumplirá:
P1*V1= P2*V2
En este caso:
P1= 3 atmV1= 7 LP2= ?V2= 0.5 LReemplazando:
3 atm* 7 L= P2* 0.5 L
Resolviendo:
[tex]P2=\frac{3 atm*7 L}{0.5 L}[/tex]
P2= 42 atm
La presión que ejerce es 42 atm.
Answer:10.5
Explanation:
3atm x 7L / 0,5L = 10.5
Quando bajamos el volmen sube la presion y cuando bajamos la presion sube el volumen
What is the volume of .750 M hydrochloride acid required to react completely with 25.00 mL of .290 M NaOH solution?
from
HCl + NaOH----> NaCl +H2O
n of acid=1
n of base=1
Molarity of acid=750M
Molarity of base=290M
volume of base=25ml
from
Va=Mb ×vb×na
Ma×nb
Va=290×25×1
750×1
Va=7250
750
Va=9.67ml
The volume of .750 M hydrochloride acid is required to react completely with 25.00 mL of .290 M NaOH solution is 9.67ml
HCl + NaOH----> NaCl +H2O
n of acid=1
n of base=1
Molarity of acid=750M
Molarity of base=290M
volume of base=25ml
Therefore,
Va=Mb ×vb×na
Ma×nb
Va=290×25×1
750×1
Va=7250
750
Hence,
Va=9.67ml
What is Hydrochloric acid?
Hydrochloric acid, also known as muriatic acid, is an aqueous solution of hydrogen chloride. It is a colorless solution with a distinctively pungent smell. It is classified as a strong acid. It is a component of the gastric acid in the digestive systems of most animal species, including humans. Hydrochloric acid is an important laboratory reagent and industrial chemical.
Learn more about Hydrochloric acid
https://brainly.com/question/27808720
#SPJ2
Describe the formation of calcium chloride (4 marks)
Answer:
It is an ionic compound that consists of one calcium cation Ca2+ and two chlorine anions. The bivalent calcium metal forms an ionic bond with two chlorine atoms. The formation of cacl2 happens mainly by reacting limestone (CaCo3) with hydrochloric acid (HCl).
I
I-U-I
I-U-I
H
-U-I
H-C-HH-C-H
I
U-U-I
Ti
I-U-I
