Answer:
Fiber Optic, it allows for speeds up to 1200 mbps
Explanation:
The trackpad/touchpad on my laptop is acting unusual. When I click on something or move to an area, it jumps or moves to another area. What would be a good troubleshooting step to try and resolve this issue?
a. Use a mouse instead
b. Remove all possible contact points, and test again while ensuring only a single contact point
c. Refer caller to user guides
d. increase the brightness of the display
Answer:
My best answer would be, "b. Remove all possible contact points, and test again while ensuring only a single contact point"
This is because usually when the cursor jumps around without reason, it's caused by the user accidentally hitting the mouse touchpad on his or her laptop while typing. ... Similarly, know that just because you have an external mouse attached to your laptop, the built-in mousepad is not automatically disabled.
Brainliest?
What do LinkedIn automation tools do?
Answer:
Most of the tools are used to perform simple repetitive tasks that take a lot of time if done manually.
1. Sending Connection requests
2. Running Direct messaging campaigns
3. Endorsing people’s skills.
4. Collecting leads data
5. Extracting data from LinkedIn
With automation, it may seem like you’ve been dealt the ultimate hand.
In addition, some of the latest LinkedIn automation tools run personalized campaigns that result in increasing:
1. Increasing networks
2. Connections
3. Leads
4. Sales
Your organization network diagram is shown in the figure below. Your company has the class C address range of 199.11.33.0. You need to subnet the address into three subnets and make the best use of the available address space. Which of the following represents the addressing scheme you would apply to the New York office and Toronto Office?
(A) 199.11.33.160/31
(B) 199.11.33.0/25
(C) 199.11.33.128/27
(D) 199.11.33.0/31
(E) 199.11.33.160/30
(F) 199.11.33.128/28
Answer:
aaaa
Explanation:
Code Example 4-2 def get_volume(width, height, length=2): volume = width * height * length return volume def main(): l = 3 w = 4 h = 5 v = get_volume(l, w, h) print(v) if __name__ == "__main__": main() Refer to Code Example 4-2: If you add the following code to the end of the main() method, what does it print to the console? print(get_volume(10, 2))
Answer:
Hence the answer is 4.
Explanation:
get_volume(3,4,5) returns 3*4*5 = 60
width is 3
height is 4
length is 5
Saji was exploring the Themes menu for a presentation she just started working on. She found one she really liked, but wanted to look at the next one just to check it out. Nope, she still likes the previous one better. What's the quickest way to get it back?
a. scroll up to the beginning of the Themes menu and click through until she finds it again
b. click Ctrl+Z and the cool theme will be restored
c. click Ctrl+F and type in the name of the theme
Answer:
Probably CTRL-Z because the action can be undone.
Explanation:
Hope this helped. If it is not CTRL-Z well then it is CTRL-F. But it should be CTRL-Z.
Write a program that will generate a personalized invitation within a text file for each guest in the guest list file using the event information found in the event details file. Put all the generated invitation files in a directory called invitations. Ensure that the name of each invitation file uniquely identifies each guest's invitation
Answer:
Code:
import os # os module to create directory
event_file = open("event_details.txt", "r") # Getting event file
event_details = "" # event details to be stored
for row in event_file: # traversing through the event_file
event_details += row # appending event details
os.mkdir("./invitations") # make directory in the same parent directory
names = open("guest_list.txt", "r") # getting names of the people
for name in names: # traversing through names in guest_list file
name = name.replace('\n', '') # removing the ending '\n' from the name
invitation_msg = "Hi! " + name + ", You are heartly invited in the Ceremony.\nAt " + event_details # Generating the invitation message
file_name = '_'.join(name.split(' ')) # Spliting name in space and joining with the '_'
file_path = "./invitations/" + file_name + ".txt" # Generating each file path
invite_file = open(file_path, "w") # Creating the file for each name
invite_file.write(invitation_msg) # Write invitation to file
Output:
A desktop computer is a type of mobile device.
a. true
b. false
A desktop computer is a type of mobile device: B. False.
What is a desktop computer?A desktop computer simply refers to an electronic device that is designed and developed to receive data in its raw form as an input and processes these data into an output that's usable by an end user.
Generally, desktop computers are fitted with a power supply unit (PSU) and designed to be used with an external display screen (monitor) unlike mobile device.
In conclusion, a desktop computer is not a type of mobile device.
Learn more about desktop computer here: brainly.com/question/959479
#SPJ9
Gimme Shelter Roofers maintains a file of past customers, including a customer number, name, address, date of job, and price of job. It also maintains a file of estimates given for jobs not yet performed; this file contains a customer number, name, address, proposed date of job, and proposed price. Each file is in customer number order.
Required:
Design the logic that merges the two files to produce one combined file of all customers whether past or proposed with no duplicates; when a customer who has been given an estimate is also a past customer.
Answer:
Hence the complete implementation of python code that reads two files and merges them together.
def merge_file(past_file_path,proposed_file_path, merged_file_path):
past_file_contents=load_file(past_file_path)
proposed_file_contents=load_file(proposed_file_path)
proposed_customer_name = []
for row in proposed_file_contents:
proposed_customer_name.append(row[1])
with open(merged_file_path,'w') as outputf:
outputf.write("Customer Number, Customer Name, Address\r\n")
for row in proposed_file_contents:
line = str(row[0]) +", " + str(row[1]) + ", " + str(row[2]) +"\r\n"
outputf.write(line)
for row in past_file_contents:
if row[1] in proposed_customer_name:
continue
else:
line = str(row[0]) + ", " + str(row[1]) + ", " + str(row[2]) + "\r\n"
outputf.write(line)
print("Files merged successfully!")
# reads the file and returns the content as 2D lists
def load_file(path):
file_contents = []
with open(path, 'r') as pastf:
for line in pastf:
cells = line.split(",")
row = []
for cell in cells:
if(cell.lower().strip()=="customer number"):
break
else:
row.append(cell.strip())
if len(row)>0:
file_contents.append(row)
return file_contents
past_file_path="F:\\Past Customer.txt"
proposed_file_path="F:\\Proposed Customer.txt"
merged_file_path="F:\\Merged File.txt"
merge_file(past_file_path,proposed_file_path,merged_file_path)
Predictive Algorithms Identify one use/application in which tprediction might cause significant ethical harms.
a. True
b. False
Write a function named multiply_by_20. The function should accept an argument and display the product of its argument multiplied by 20
Answer:
def multiply_by_20(num):
print(num * 20)
Explanation:
def multiply_by_20(num):
print(num * 20)
# Testing the function here. ignore/remove the code below if not required
multiply_by_20(2)
multiply_by_20(7)
multiply_by_20(5)
Prepare an algorithm and draw a corresponding flowchart to compute the sum
and product of all prime numbers between 1 and 50.
Answer:
Explanation:
Given
The Janitorial and Cafeteria departments are support departments. Samoa uses the sequential method to allocate support department costs, first allocating the costs from the Janitorial Department to the Cafeteria, Cutting, and Assembly departments. Determine the proportional (percentage) usage of the Janitorial Department by the:
Complete Question:
Departmental information for the four departments at Samoa Industries is provided below. Total Cost Cost Driver Square Feet Number of employees Janitorial $150,000 square footage serviced 200 Cafeteria 50,000 Number of employees 20,000 Cutting 1,125,000 4,000 120 Assembly 1,100,000 16,000 The Janitorial and Cafeteria departments are support departments Samoa uses the sequential method to allocate support department costs, first allocating the costs Department to the Cafeteria, Cutting and Assembly departments Determine the proportional (percentage) usage of the Janitorial Department by the a. Cafeteria Department b. Cutting Department c. Assembly Department
Answer:
Samoa Industries
Proportional (percentage) usage of the Janitorial Department:
Cafeteria = 50%
Cutting = 10%
Assembly = 40%
Explanation:
a) Data and Calculations:
Total Cost Cost Driver Square Feet Number of
employees
Janitorial $150,000 Square footage serviced 200 40
Cafeteria 50,000 Number of employees 20,000 12
Cutting 1,125,000 4,000 120
Assembly 1,100,000 16,000 40
Proportional (percentage) usage of the Janitorial Department:
Cafeteria = 50% (20,000/40,000 * 100)
Cutting = 10% (4,000/40,000 * 100)
Assembly = 40% (16,000/40,000 * 100)
Cost Allocation of the Janitorial Department:
Cafeteria = 50% * $150,000 = $75,000
Cutting = 10% * $150,000 = 15,000
Assembly = 40,% * $150,000 = 60,000
Total = $150,000
Suppose you are among those who believe that the NLRA should be transformed. What arguments support the claim that a complete overhaul is necessary
Answer:
See explanation below.
Explanation:
Note: This question is not complete. The complete question is therefore provided before answering the question follows:
Suppose you are among those who believe that the NLRA should be transformed. What arguments support the claim that a complete overhaul is necessary? What alternative models might be considered as a replacement for the NLRA model of exclusive representation?
The explanation of the answers is now provided as follows:
a. What arguments support the claim that a complete overhaul is necessary?
The adversarial nature of labor relations in the United States, which many claim is produced by the National Labor Relations Act's (NLRA)'s very existence, is the fundamental reason for its transformation. In a global economy, supporters of transformation say that adversarialism is undesirable for employees and employers because it makes representation and profit maximization more difficult. The principles of exclusive representation and majority support are specific aspects of the NLRA that promote adversarialism.
The fact that it is compulsory for a union to win the support of a majority of workers, the process of representation results into a tone of a "u versus. them". As a result, both sides try to make the other look bad in the eyes of the employees who will vote.
Based on the above, a complete overhaul is necessary.
b. What alternative models might be considered as a replacement for the NLRA model of exclusive representation?
Giving nonmajority unions legal protection by requiring employers to negotiate with them is one alternative to replace the NLRA model of exclusive representation. Under this, the contracts would not cover all employees; only those who are union members would be covered.
Another alternative is that work councils could also be used to supplement or replace the certification process. Employee free speech rights, wrongful dismissal procedures, employee participation on business boards of directors, and the right to workplace information are all potential transformation factors that might be taken into consideration.
The function of an audio mixer is to _____. layer audio tracks at their ideal volume combine, control, and route audio signals from inputs to outputs process and edit pre-recorded audio signals automatically adjust volume for audio channe
Answer: combine, control, and route audio signals from inputs to outputs
Explanation:
A audio mixer is refered to as the sound mixer or the mixing console and it's an electronic device that's used for mixing, and combining several audio signals and sounds.
The input to the console is the microphone. The audio mixer can also be used in controlling digital or analog signals. These are then summed up in producing output signals.
Therefore, the function of the audio mixer is to combine, control, and route audio signals from inputs to outputs.
Which of the following definitions best describes the principle of separation of duties?
Answer:
A security stance that allows all communications except those prohibited by specific deny exceptions
A plan to restore the mission-critical functions of the organization once they have been interrupted by an adverse event
A security guideline, procedure, or recommendation manua
lAn administrative rule whereby no single individual possesses sufficient rights to perform certain actions
Virtualization:
a. can boost server utilization rates to 70% or higher.
b. has enabled microprocessor manufacturers to reduce the size of transistors to the width of an atom.
c. uses the principles of quantum physics to represent data.
d. allows smartphones to run full-fledged operating systems.
e. allows one operating system to manage several physical machines.
A backbone network is Group of answer choices a high speed central network that connects other networks in a distance spanning up to several miles. a group of personal computers or terminals located in the same general area and connected by a common cable (communication circuit) so they can exchange information. a network spanning a geographical area that usually encompasses a city or county area (3 to 30 miles). a network spanning a large geographical area (up to thousands of miles). a network spanning exactly 200 miles with common carrier circuits.
Answer:
a high speed central network that connects other networks in a distance spanning up to several miles.
Explanation:
A backbone network functions just like the human backbone providing support for network systems by offering a network infrastructure that allows small, high speed internet connectivity. It is a principal data route between large interconnected networks which offers connection services spanning several miles. Most local area networks are able to connect to the backbone network as it is the largest data connection on the internet. This backbone networks are mainly utilized by large organizations requiring high bandwidth connection.
Suppose you were charged with putting together a large LAN to support IP telephony (only) and that multiple users may want to carry on a phone call at the same time. Recall that IP telephony digitizes and packetizes voice at a constant bit rate when a user is making an IP phone call. How well suited are these four protocols for this scenario
Answer:
TDMA: Time-division multiple access (TDMA) will operate effectively.
CSMA: Carrier-sense multiple access (CSMA) will NOT operate properly.
Slotted Aloha: Slotted Aloha will NOT perform effectively.
Token passing: Token passing will operate effectively.
Explanation:
Note: This question is not complete. The complete question is therefore provided before answering the question as follows:
Suppose you were charged with putting together a LAN to support IP telephony (only) and that multiple users may want to carry on a phone call at the same time. Recall that IP telephony digitizes and packetizes voice at a constant bit rate when a user is making an IP phone call. How well suited are these four protocols for this scenario?
TDMA:
CSMA:
Slotted Aloha:
Token passing:
Provide a brief explanation of each answer.
The explanation of the answers is now provided as follows:
TDMA: Time-division multiple access (TDMA) will operate effectively in this situation because it provides a consistent bit rate service of one slot every frame.
CSMA: Because of collisions and a changing amount of time to access the channel, Carrier-sense multiple access (CSMA) will NOT operate properly in this situation. Also, the length of time it takes to access a channel is not limited.
Slotted Aloha: Just like CSMA, Slotted Aloha will NOT perform effectively in this situation because of collisions and a different amount of time to access the channel. Also, the length of time it takes to access a channel is limitless.
Token passing: Token passing will operate effectively in this case because each station has a turn to transmit once per token round, resulting in a service with an effectively constant bit rate.
Write a program that solves the following problem:
One marker costs 80 cents. A package of five markers costs $3.50. This encourages people to buy complete packages rather than having to break packages open. The tax is 6.5% of the total. The shipping cost is 5% of the total (before tax). Your program will prompt for a number of markers (an integer). It will calculate and display:
⢠The number of complete packages of markers
⢠The number of separate markers (hint: use // and %)
⢠The cost for the markers before shipping and tax
⢠The cost of shipping
⢠The cost of tax
⢠The total cost of the markers after shipping and tax are added (the grand total)
Answer:
def main():
singleMarkerPrice = 0.80
packageOfMarkersPrice = 3.50
tax = 0.065
shipping = 0.050
userInput = int(input("How many markers do you want? "))
amountOfPackages = 0
singleMarkers = 0
if userInput % 5 == 0:
amountOfPackages = userInput / 5
else:
amountOfPackages = userInput // 5
singleMarkers = userInput % 5
# Just for syntax so if the single marker amount is one, it prints package instead of packages
if amountOfPackages == 1:
print("You have " + str(int(amountOfPackages)) + " complete package")
else:
print("You have " + str(int(amountOfPackages)) + " complete packages")
# Just for syntax so if the single marker amount is one, it prints marker instead of markers
if singleMarkers == 1:
print("You have " + str(int(singleMarkers)) + " single marker")
else:
print("You have " + str(int(singleMarkers)) + " single markers")
totalAmountBeforeTax = (amountOfPackages * packageOfMarkersPrice) + (singleMarkers * singleMarkerPrice)
print("The total amount before tax comes out to " + str(float(totalAmountBeforeTax)))
costOfShipping = float(round((totalAmountBeforeTax * shipping), 2))
costOfTax = float(round((totalAmountBeforeTax * tax), 2))
print("The cost of shipping is " + str(costOfShipping))
print("The cost of tax is " + str(costOfTax))
totalAmount = totalAmountBeforeTax + costOfShipping + costOfTax
print("The total amount comes out to " + str(round(totalAmount, 2)))
main()
Explanation:
This should be correct. If it isn't let me know so I can fix the code.
Suppose a company A decides to set up a cloud to deliver Software as a Service to its clients through a remote location. Answer the following [3] a) What are the security risks for which a customer needs to be careful about? b) What kind of infrastructural set up will be required to set up a cloud? c) What sort of billing model will such customers have?
Answer:
perdonnosee
Explanation:
Will has been asked to recommend a protocol for his company to use for a VPN connection to the cloud service provider that his company uses. Which of the following protocols could he rule out as options for this connection?
a. IKEv2
b. TFTP
c. L2TP
d. GRE
Answer:
The protocols that Will could rule out as options for this connection are:
b. TFTP
d. GRE
Explanation:
A virtual private network (VPN) delivers encrypted connection over the Internet to prevent unauthorized data access, thereby facilitating remote work and the transmission of sensitive data.
IKEv2 (Internet Key Exchange version 2) and Layer Two Tunneling Protocol (L2TP) are secure encryption protocols that enable virtual private network (VPN).
Trivial File Transfer Protocol (TFTP) is not encrypted for receiving and sending files but a simple boot-loading File Transfer Protocol.
Generic routing encapsulation (GRE) tunnels do not encrypt data and are not secure unless used with other secure tunnelling protocols.
write a program to input 3 numbers and print the largest and the smallest number without using if else statement
Answer:
def main():
# input
num1 = int(input("Type in a number: "))
num2 = int(input("Type in another number: "))
num3 = int(input("Type in another number: "))
list1 = [num1, num2, num3]
# sorts the array
list1.sort()
# list1[-1] prints the first element in the array
print("The largest number is: " + str(list1[-1]))
# -len(list1) takes the length of the list, in this case 3, and makes it a negative number.
# That negative number is then used as an index for the list1 array in order to print the lowest number.
print("The smallest number is: " + str(list1[-len(list1)]))
main()
Explanation:
Hope this helped :) I left some comments so you know what's going on. You can also use max(list1) and min(list1) but I chose indexing because indexing is the better way of doing stuff like this.
Have a good day!
Consider the following generalization of the Activity Selection Problem: You are given a set of n activities each with a start time si , a finish time fi , and a weight wi . Design a dynamic programming algorithm to find the weight of a set of non-conflicting activities with maximum weight.
Answer:
Assumption: Only 1 job can be taken at a time
This becomes a weighted job scheduling problem.
Suppose there are n jobs
Sort the jobs according to fj(finish time)
Define an array named arr to store max profit till that job
arr[0] = v1(value of 1st job)
For i>0. arr[i] = maximum of arr[i-1] (profit till the previous job) or wi(weight of ith job) + profit till the previous non-conflicting job
Final ans = arr[n-1]
The previous non-conflicting job here means the last job with end timeless than equal to the current job.
To find the previous non-conflicting job if we traverse the array linearly Complexity(search = O(n)) = O(n.n) = O(n^2)
else if we use a binary search to find the job Complexity((search = O(Logn)) = O(n.Log(n))
Which describes the relationship between enterprise platforms and the cloud?
Answer:
All enterprise platforms are cloud based.
Given two integers that represent the miles to drive forward and the miles to drive in reverse as user inputs, create a SimpleCar object that performs the following operations:Drives input number of miles forwardDrives input number of miles in reverseHonks the hornReports car statusThe SimpleCar class is found in the file SimpleCar.java.100 4the output is:beep beepCar has driven: 96 milesimport java.util.Scanner;public class LabProgram { public static void main(String[] args) { Scanner scnr = new Scanner(System.in); /* Type your code here. */ }}
Answer:
Explanation:
The following code is written in Java. It creates the SimpleCar class with the variables for position, milesForward, and milesReverse. It contains the constructor, Honk, reportStatus, and setter methods needed and as requested. The scanner object is created in the main method and asks the user for the number of miles forward as well as the number of miles in reverse. A test case was created and the output can be seen in the attached image below.
import java.util.ArrayList;
import java.util.Scanner;
class Brainly {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
System.out.println("How many miles forward did the car drive?");
int forward = in.nextInt();
System.out.println("How many miles in reverse did the car drive?");
int reverse = in.nextInt();
SimpleCar beep = new SimpleCar(forward, reverse);
beep.Honk();
beep.reportStatus();
}
}
class SimpleCar {
int position;
int milesForward;
int milesReverse;
public SimpleCar(int milesForward, int milesReverse) {
this.milesForward = milesForward;
this.milesReverse = milesReverse;
this.position = 0;
}
public void Honk() {
System.out.println("HONK");
}
public void reportStatus() {
position = milesForward - milesReverse;
System.out.println("Car is " + position + " miles from starting point.");
}
public void setMilesForward(int milesForward) {
this.milesForward = milesForward;
this.position += milesForward;
}
public void setMilesReverse(int milesReverse) {
this.milesReverse = milesReverse;
this.position -= milesReverse;
}
}
Using simplified language and numbers, using large font type with more spacing between questions, and having students record answers directly on their tests are all examples of _____. Group of answer choices universal design analytic scoring cheating deterrents guidelines to assemble tests
Answer:
universal design
Explanation:
Using simplified language and numbers, using large font type with more spacing between questions, and having students record answers directly on their tests are all examples of universal design.
Universal Design can be regarded as design that allows the a system, set up , program or lab and others to be
accessible by many users, this design allows broad range of abilities, reading levels as well as learning styles and ages and others to have access to particular set up or program.
it gives encouragment to the development of ICTS which can be
usable as well as accessible to the widest range of people.
Which of the following will cause you to use more data than usual on your smartphone plan each month?
a. make a large number of outbound calls
b. sending large email files while connected to wifi
c. streaming movies from Netflix while not connected to Wi-Fi
d. make a large number of inbound calls
Coral Given three floating-point numbers x, y, and z, output x to the power of y, x to the power of (y to the power of z), the absolute value of x, and the square root of (x * y to the power of z).
Output all results with five digits after the decimal point, which can be achieved as follows:
Put result to output with 5 decimal places
Ex: If the input is:
5.0 2.5 1.5
the output is:
55.90170 579.32402 5.00000 6.64787
Hint: Coral has built-in math functions (discussed elsewhere) that may be used.
Answer:
The program is as follows:
float x
float y
float z
x = Get next input
y = Get next input
z = Get next input
Put RaiseToPower(x,y) to output with 5 decimal places
Put "\n" to output
Put RaiseToPower (x,RaiseToPower (y,z)) to output with 5 decimal places
Put "\n" to output
Put AbsoluteValue(x) to output with 5 decimal places
Put "\n" to output
Put SquareRoot(RaiseToPower (x * y,z)) to output with 5 decimal places
Explanation:
This declares all variables
float x
float y
float z
This gets input for all variables
x = Get next input
y = Get next input
z = Get next input
This prints x^y
Put RaiseToPower(x,y) to output with 5 decimal places
This prints a new line
Put "\n" to output
This prints x^(y^z)
Put RaiseToPower (x,RaiseToPower (y,z)) to output with 5 decimal places
This prints a new line
Put "\n" to output
This prints |x|
Put AbsoluteValue(x) to output with 5 decimal places
This prints a new line
Put "\n" to output
This prints sqrt((x * y)^z)
Put SquareRoot(RaiseToPower (x * y,z)) to output with 5 decimal places
What happens when a dataset includes records with missing data?
Answer:
However, if the dataset is relatively small, every data point counts. In these situations, a missing data point means loss of valuable information. In any case, generally missing data creates imbalanced observations, cause biased estimates, and in extreme cases, can even lead to invalid conclusions.
It makes data analysis to be more ambiguous and more difficult.
Missing data is simply the same as saying that there are values and information that are unavailable. This could be due to missing files or unavailable information.
A dataset set with missing data means more work for the analyst. There needs to be a transformation in those fields before the dataset can be used.
Generally speaking missing data could lead to bias in the estimation of data.
A data scientist is a data expert who is in charge of data. He performs the job of data extraction, data analysis, data transformation.
read more at https://brainly.com/question/17578521?referrer=searchResults
When you expect a reader of your message to be uninterested, unwilling, displeased, or hostile, you should Group of answer choices begin with the main idea. put the bad news first. send the message via e-mail, text message, or IM. explain all background information first.
Answer:
explain all background information first.
Explanation:
Now if you are to deliver a message and you have suspicions that the person who is to read it might be uninterested, unwilling, hostile or displeased, you should put the main idea later in the message. That is, it should come after you have provided details given explanations or evidence.
It is not right to start with bad news. As a matter of fact bad news should not be shared through mails, IM or texts.