Answer:
--->The goals of the investigators is to prevent tampering with evidence and reduce exposing workers to additional harm.
--> The investigators are able to find out how fast a car that was involved in an accident was going by measuring the length of skid marks.
Explanation:
Automobile or car accidents are incidents which when it occurs are generally fast, violent and confusing to both the people involved and the eyewitnesses. With the development in technology, investigators (usually known as forensic investigators) use a variety of tools and physical evidence to put together a clear picture of what happened during a car accident. With their discoveries, they would be able to to prevent tampering with evidence and reduce exposing workers to additional harm.
They can know how fast a car that was involved in an accident was going by:
--> Analysing a physical evidence such as measurement of the length of skid marks. When the skid distance (which is the drag factor due to road surface friction) and the braking efficiency are determined, the minimum speed of a car as it started skidding can be estimated. Even the appearance of the skid mark also tells investigators whether a car was braking, accelerating, or sliding.
What kind of circuit is the one shown below?
A. Series
B. Parallel
C. Open
D. Combination
That's a parallel circuit. (B)
When current from Point-A reaches the 3-way intersection just to the right of Point-B, it has to make a choice: Either turn left, go through B, and light the lower bulb, or go straight and light the upper bulb.
A circuit that has any "decision" points in it is a parallel circuit. What happens in the real world is: The current splits up. Some of the current that reaches the intersection turns left toward Point-B, and the rest of it goes straight up.
A series circuit is one in which there's only one possible path all the way around. There are no intersections of more than 2 roads, and no electron ever has to decide which way to flow.
An open circuit is one in which there's a break somewhere along the line and electrons can't jump across it. It's like a railroad where a big piece is cut out of the track somewhere. So no trains can travel on that route, and there's no current flowing anywhere in the circuit.
I'm not so sure about a "combination" circuit. I guess you could give that name to a complicated circuit that has some series parts and some parallel-parts. Personally, I'd call that a "series-parallel" circuit. But it really doesn't matter right now. Whatever the word means, the circuit in the picture is definitely not a "combination" circuit.
Answer:
B. Parallel Circuits
Explanation:
A parallel circuit is constructed by connecting the terminals of all the individual load devices so that the same value of voltage appears across each component. In a parallel circuit, charge divides up into separate branches such that there can be more current in one branch than there is in another.
hope i helped
Saul is testing an installation and discovers a short circuit what’s causing this
A.high current
B.high voltage
C.low resistance
D.low voltage
Answer:
im pretty sure that it's (A.) High current
Explanation:
pf
not 100% sure, tho
True or False. A compound is formed when two or more elements are combined to make a new substance with
its own properties
True
Fase
What is the most accurate and precise method to measure the thickness of a coin?
Answer:
The most accurate and precise method to measure the thickness of a coin would be by a micrometer screw guage.
The most accurate and precise method to measure the thickness of a coin is with the help of a screw gauge.
What is a unit of measurement?
A unit of measurement is a specified magnitude of a quantity that is established and used as a standard for measuring other quantities of the same kind.
It is determined by convention or regulation.
Any additional quantity of that type can be stated as a multiple of the measurement unit.
The smallest length that a screw gauge can measure is called its least count.
Thus, if we have to measure the thickness of a coin using a screw gauge to measure a coin is the most exact and precise approach available.
Learn more about the unit of measurement here, refer to the link given below;
brainly.com/question/12629581
#SPJ2
Please help me , I also have to show work on paper
Answer:
Choose B
Explanation:
Hope Can I help you
A car generator turns at 400 rpm (revolutions per minute) when the engine is idling. It has a rectangular coil with 300 turns of dimensions 5.00 cm by 6.46 cm that rotates in an adjustable magnetic field. What is the field strength needed to produce a 24.0 V peak emf
Answer:
The field strength needed to produce a 24.0 V peak emf is 0.5913 T
Explanation:
From the formula for maximum emf of a generator,
[tex]emf_{max}= NAB\omega[/tex]
∴ [tex]B = \frac{emf_{max} }{NA\omega}[/tex]
Where N is the number of loops
A is cross section of loops
B is magnetic field strength
ω is the angular frequency of loops
From the question, [tex]emf_{max} = 24.0V[/tex]
N = 300 turns
A = l × b ( since it is a rectangular coil)
A = 6.46 cm × 5.00 cm
A = 0.0646 m × 0.05 m
A = 0.00323 m²
ω = 400 rpm = (400/60)×2π rad/s
ω = 41.8879 rad/s
Putting all the parameters into the formula
[tex]B = \frac{emf_{max} }{NA\omega}[/tex]
[tex]B = \frac{24.0}{300\times0.00323\times41.8879}[/tex]
[tex]B = 0.5913T[/tex]
Hence, the field strength needed to produce a 24.0 V peak emf is 0.5913 T
what are the factors of evaporation and give explanation
Answer:
The three primaryfactors of evaporation are heat, atmospheric pressure (which determines the percentage of moisture) and the movementofair. At the molecular level, there is no strict boundary between the liquid state and the vapor state
Which type of wires (copper, aluminum, or string) are ferromagnetic metals?
Answer:
Copper isn't ferromagnetic,
Aluminum isn't ferromagnetic,
String has a ferromagnetic property
So in conclusion:
The answer is strings :)
A boy shoves his stuffed toy zebra down a frictionless chute. It starts at a height of 1.45 m above the bottom of the chute with an initial speed of 1.23 m/s . The toy animal emerges horizontally from the bottom of the chute and continues sliding along a horizontal surface with a coefficient of kinetic friction of 0.231 . How far from the bottom of the chute does the toy zebra come to rest? Assume g=9.81 m/s2 .
Answer:
The answer is "4.97 m".
Explanation:
[tex]u = 1.23\ \frac{m}{s}\\\\[/tex]
[tex]H= 1.45 \ m\\\\[/tex]
[tex]\mu = 0.231\\\\[/tex]
The law of conservation tells us that heat energy at the top with kinetic energy at the top equals kinetic energy at the base.
[tex]mgh+\frac{1}{2}mu^2=\frac{1}{2}mv^2\\\\2gh +u^2 =v^2\\\\v=\sqrt{u^2+2gh}[/tex]
[tex]v=\sqrt{(1.23\ \frac{m}{s})^2+2(9.81 \frac{m}{s^2}) +(1.45\ m)[/tex]
[tex]=\sqrt{1.5129+19.62 +1.45}\\\\=\sqrt{22.5829}\\\\=4.75\ \frac{m}{s}[/tex]
Friction force is given by the formula
[tex]f=-\mu mg \\\\ma= -\mu mg\\\\a=-\mu g\\\\[/tex]
[tex]= -(0.231) \ (9.81\ \frac{m}{s^2})\\\\=-2.26611 \ \frac{m}{s^2}[/tex]
Now by using an equation of motion as
[tex]v^2-u^2= 2as[/tex]
From the above the distance traveled is
[tex]S=\frac{v^2-u^2}{2a}[/tex]
[tex]S=\frac{(0)^2-(4.75\ \frac{m}{s})^2}{2(-2.26611\ \frac{m}{s^2})}\\\\[/tex]
[tex]=\frac{-(4.75\ \frac{m}{s})^2}{2(-2.26611\ \frac{m}{s^2})}\\\\=\frac{-22.5625}{-4.53222}\\\\=4.97[/tex]
In other words, the distance from the bottom of the chute to the point where the toy zebra comes to rest is [tex]s = 4.97\ m[/tex]
What is one Pascal pressure? What is its unit?
Explanation:
the force acting perpendicularly on unit area of surface
unit=pascle .
A pressure of one Newton per square meter .. The SI unit of 1 Pascal pressure is 1 Newton per square metre .
the force between the earth and the body which is at a distance r from the center of the earth is F. What must be this distance for the force to be doubled.
Answer:
Explanation:
The gravitational force between the earth and another body is F = -GM_em/r^2 r where G = 6.67 times 10^-11 Nm^2/kg^2 is the gravitational constant, M_e = 5.97 times 10^24 kg is the mass of the earth, m is the mass of the other body, and r is the position vector of the second body with respect to the centre of the earth.
give scientific reasons when the body falls freely to the ground its motion as the uniform acceleration
Answer:
When an object falls freely to the ground, its acceleration is uniform. Hint: When an object falls freely on the ground, the force of the gravity works on it. So the acceleration on the object is the acceleration due to gravity. So the acceleration is uniform on the freely falling body.
A merry-go-round rotates with a centripetal acceleration of 18 m/s^2. If the outer horses are 9 m from the center of the ride. What is their velocity?
A. 12.7 m/s
B. 14.6 m/s
C. 16.3 m/s
D. 10.4 m/s
Answer:
A
Explanation:
a_c = v^2/r
v = sqrt*a_c × r*
v = sqrt * 18 × 9*
v = 9×sqrt *2*
v = 12. 7 m/s
What is not one of the main uses of springs?
A. Bike suspension
B. The seasons
C. Clock making
D. Car suspension
Quick answer
Answer:
b. the seasons
Explanation:
what type of simple machine is shown in the diagram?write the length and height of slope in it. Please help ASAP!!!
the machine shown in the diagram is called a tramp.
the height of the tramp is 5 and the length is 12
Answer:
Incline plane
5/12 rise/run
Explanation:
Incline plane
5/12 rise/run
Annie has a soccer ball and a cake ball she kicks each ball with the same Force the soccer ball accelerates at 3 m per second squared and the kickball accelerates at 5 m per second squared use Newton's law to describe why the kickball has a greater acceleration
how is one standard kilogram defined in SI system?
Answer:
One standard kilogram is define as the mass of platinium iridium cylinder having equal diameter and height kept at the particular condition of international bureo of weigh and measure sevre near paris.
HELP ASAP!!!
What size object (impactor) may create such a crater?
Answer:
I HOPE IT WILL HELP YOU.
:D
can anyone help me with this one
Answer:
c) sin c /sin d
because light is moving from denser to shallower medium
b) refraction of light
Explanation:
Which nucleus completes the following equation?
Please ignore the answer I chose, it might be wrong
Answer:
D. [tex]^{39}_{18} Ar[/tex]
Explanation:
The given nuclear equation is the beta decay of chorine in which an electron, known as a beta particle, is given off from within the nucleus due to the breakdown of a neutron within the nucleus into a proton and a beta particle, such that the atomic number is increased by 1 from 17 to 18, which is the atomic number or argon, Ar, as follows;
[tex]^{39}_{17}Cl \ \rightarrow \ ^0_{-1} e + \ ^{39}_{18} Ar[/tex]
A uniform bridge span of weight 1200 kN and of
length 17.0 m rests on a support of width 1.0 m at
either end. A stationary lorry of weight 60 kN is the
only object on the bridge. Its centre of mass is 3.0m
from the centre of the bridge.
15.0 m
The force exerted by the earth on a body is called ______of a body.
Answer:
The force exerted by the earth on a body is called gravitational of a body.
i think this is the answer
Answer:weight
Explanation:
V = ?
d= 15 m left
t = 5 s
What is the velocity?
Answer:
Velocity= 3[tex]ms^{-1}[/tex]
Explanation:
Formula to find velocity = Displacement/time taken
therefore, velocity= 15/5 ➤ Velocity = 3 [tex]ms^{-1}[/tex]
Which is the formula that describes the magnitude of an object's kinetic energy? A. kinetic energy = mass * (velocity)2 x 0.5
B. kinetic energy = mass x acceleration C. kinetic energy = mass x change in velocity
D. kinetic energy = mass x velocity
Answer:
A
kinetic energy=(mv²)/2
(1/2)(mv²)
(mv²)*0.5
where m=mass and v=velocity/speed
Question 4: Scientists and engineers often plan investigations to see how changing one variable affects the outcome. A variable is any trait, condition or feature of something being tested. Imagine a team is testing the speed of a toy car. In trial 1, they test the car and measure how long it takes it to travel 2 meters. In trial 2, they want to investigate how changing a variable affects the car's speed. Which of the following plans is BEST for trial 2?
A variable, as its name implies, is something that can change, ideally, as the scientists and engineers want to.
Particularly we care for the independent variables, which are the ones we can control and affect the dependent variables, which are the outcomes we study.
For a quick example, think of an experiment where you heat something on an oven. The temperature of the oven can be set by the scientist, so the temperature is an independent variable because they can control it.
Now let's see the given experiment.
The team is testing the speed of the toy car.
remember that:
distance/time = speed.
We know that in the first trial, they test how long takes the car to travel 2 meters.
Now, what we can change for the second trial, knowing that the speed is the output that we are studying?
The answer is trivial, the only thing we can change in the given setup is the distance that the car travels, so in the next trial we should change the variable "distance travelled by the car" and see if it affects the output "speed of the car".
If you want to learn more about variables, you can read:
https://brainly.com/question/19585043
The moving bicycle moves for sometime even after stopping the paddling.why
Answer:
when you are paddling the push carry on when you paddle the hard put on the push.
Answer:
Because of inertia
Explanation:
As stated in Newton first law "An object at rest will stay at rest, an object in motion will stay in motion unless it is acted upon by a force."
For an example:
If you have a drink without a lid in a car and a car suddently the car stop, u will automatically try to catch the drink preventing it from spilling. This is because that the drink that was in motion with the car want to stay in motion, but when the car stop, the drink still wanna be in motion, that's why it will be flying off and spill if u don't catch it.
Back to the question:
if a bicyccle is in motion, it will wants to be in motion untill a force act upon it, let's say a bump or fricition.
hope this help. give me the brainliest if u can.
Wagonium-292 has a half-life of 1 hour. If you started with an 80 gram sample, how much Wagonium-292 will remain after 4 hours? A.) 10g B.) 40g C.) 160g D.) 5G
After 1 hour, 80 g decays to 40 g.
After another hour (total 2 hours), 40 g decays to 20 g.
After another hour (total 3), 20 g decays to 10 g.
After one more hour (total 4), 10 g decays to (D) 5 g.
5. True or False: A beginner should start with long workout sessions and work down to shorter ones.
True
False
Answer:
false...............
Answer:
False A beginners should start from shorter ones to long work sessions
Explanation:
Hope it helps
Mark me as Brainliest plz!!
:DD
ITSMISSBADGURLXDensity of an object can be found by calculating mass divided by volume. If two objects have the same mass, but one has a greater volume, the object with more volume is less dense. Does water’s density change when it is frozen?
Answer:
yes, the density of ice is less than the density of water. Ice floats on water.
Explanation:
What is the difference between gross anatomy and microscopic anatomy?
Answer:
The gross (or macroscopic) anatomy: The study of anatomical features visible to the naked eye, such as internal organs and external features.
The microscopic anatomy: The study of minute anatomical structures on a microscopic scale, including cells (cytology) and tissues (histology).
