What determines the ending units of a stoichiometry problem?

Answer:

The more concentrated acetic acid buffer has a better buffer capacity because requires more moles of acid or base to change the pH than a more diluted acetic acid buffer.

Explanation:

Buffer capacity is defined as the moles of an acid or base that are needed to change the pH of a buffer in 1 unit.

A more concentrated solution of acetic buffer contains more moles of the acid per liter of solution. A solution that contains more moles of the acetic ion or the acetic acid requires more moles of base or acid to change the pH, that means:

The more concentrated acetic acid buffer has a better buffer capacity because requires more moles of acid or base to change the pH than a more diluted acetic acid buffer.

[tex]P_{1} = \text{2.50 atm}[/tex]

[tex]T_{1} = 15^{\circ}\text{C + 273 = 288 K}[/tex]

[tex]V_{1} = \text{4.5 L}[/tex]

[tex]P_{2} = \text{0.85 atm}[/tex]

[tex]V_{2} = \text{2.5 L}[/tex]

[tex]T_{2}[/tex]

[tex]\dfrac{P_{1}V_{1}}{T_{1}} = \dfrac{P_{2}V_{2}}{T_{2}}[/tex]

[tex]T_{2} = T_{1} \times \dfrac{P_{2}}{P_{1}} \times \dfrac{V_{2}}{V_{1}}[/tex]

[tex]T_{2} = \text{288 K} \times \dfrac{\text{0.85 atm}}{\text{2.50 atm}} \times \dfrac{\text{2.5 L}}{\text{4.5 L}}[/tex]

[tex]\boxed{T_{2} = \text{54.4 K}}[/tex]

[tex]\\[/tex]

#ILoveChemistry

#ILoveYouShaina

Answer:

The three freezing points will all be slightly different. It is given that a water solution has a freezing point of zero degrees Celsius, so water would have a freezing temperature below that. Salt will lower the freezing point, the more that is added.

Explanation:

Answer:

SF2 > H2O > PBr3 > NCl3

Explanation:

Compare the electronegativity values for the atoms and classify the nature of the bonding based on the electronegativity difference.

P has an electronegativity of 2.1, while Br has an electronegativity of 2.96. The difference is 0.86, indicating that these atoms will form covalent bonds.

S has an electronegativity of 2.58 while F has an electronegativity of 4.0. The difference is 1.42, indicating that these atoms will form polar covalent bonds.

O has an electronegativity of 3.5 while H has an electronegativity of 2.1. The difference is 1.4, indicating that these atoms will form polar covalent bonds.

N has an electronegativity of 3.04, whereas Cl has an electronegativity of 3.5. This difference of 0.46 indicates that these atoms will form covalent bonds.

We know that the greater the electronegativity, the higher the polarity. In decreasing order of polarity, we have:

SF2 > H2O > PBr3 > NCl3

Answer:

A. Mass of KMnO₄ = 316.08 g

B. Mass of KMnO₄ = 41.49 g

C. Mass of KMnO₄ = 0.13 g.

Explanation:

A. Determination of the mass of KMnO₄

We'll begin by determining the number of mole of KMnO₄ in the solution. This can be obtained as follow:

Volume = 1 L

Molarity = 2 M

Mole of KMnO₄ =?

Mole = Molarity × Volume

Mole of KMnO₄ = 2 × 1

Mole of KMnO₄ = 2 moles

Finally, we shall determine the mass of KMnO₄. This can be obtained as follow:

Mole of KMnO₄ = 2 moles

Molar mass of KMnO₄ = 158.04 g/mole

Mass of KMnO₄ =?

Mass = mole × molar mass

Mass of KMnO₄ = 2 × 158.04

Mass of KMnO₄ = 316.08 g

B. Determination of the mass of KMnO₄

We'll begin by determining the number of mole of KMnO₄ in the solution. This can be obtained as follow:

Volume = 350 mL = 350/1000 = 0.35 L

Molarity = 0.75 M

Mole of KMnO₄ =?

Mole = Molarity × Volume

Mole of KMnO₄ = 0.75 × 0.35

Mole of KMnO₄ = 0.2625 mole

Finally, we shall determine the mass of KMnO₄. This can be obtained as follow:

Mole of KMnO₄ = 0.2625 mole

Molar mass of KMnO₄ = 158.04 g/mole

Mass of KMnO₄ =?

Mass = mole × molar mass

Mass of KMnO₄ = 0.2625 × 158.04

Mass of KMnO₄ = 41.49 g

C. Determination of the mass of KMnO₄

We'll begin by determining the number of mole of KMnO₄ in the solution. This can be obtained as follow:

Volume = 80 mL = 80/1000 = 0.08 L

Molarity = 0.01 M

Mole of KMnO₄ =?

Mole = Molarity × Volume

Mole of KMnO₄ = 0.01 × 0.08

Mole of KMnO₄ = 0.0008 mole

Finally, we shall determine the mass of KMnO₄. This can be obtained as follow:

Mole of KMnO₄ = 0.0008 mole

Molar mass of KMnO₄ = 158.04 g/mole

Mass of KMnO₄ =?

Mass = mole × molar mass

Mass of KMnO₄ = 0.0008 × 158.04

Mass of KMnO₄ = 0.13 g

Answer:

berylium

Explanation:

atomic number 4 atomic mass 8 and charge +1

Answer:

drought

Explanation:

droughts are long periods without water

Answer:

False. Intermolecular forces of attraction are important in holding large molecules together.

Explanation:

Within a molecule, atoms are held together by intramolecular forces. That is, intramolecular forces are the attractive forces that hold the atoms or ions that make up chemical substances (elements and compounds) together, forming a chemical bond.

On the other hand, intermolecular forces are those that act on different molecules or ions and that make them attract or repel each other. In other words, intermolecular forces are those that occur between the different molecules of a compound, and cause these molecules or ions to attract or repel each other.

So, intermolecular forces of attraction are important in holding large molecules together.

Answer:

The correct answer is - d. hydrogen bonding.

Explanation:

Water has strong hydrogen bonds between its molecules that require a very high amount of energy in order to break. Water molecules are joined together or bound with a strong intermolecular force called hydrogen bonds.

These bonds require more kinetic energy which means more temperature or heat in order to break the bonds and turn into steam and this is the reason it has a high boiling point.

Answer:

A: Is constant irrespective of mass of the gases

Explanation:

Avagadro's number, denoted by nA, is a number that represents the units in one mole of any substance. The number is 6.02214076 × 10²³ and the units can be atoms, molecules, ions, formula units etc.

That is;

1 mole of a substance = 6.022 × 10²³atoms, molecules, ions, electrons etc.

It is important to note that the Avagyadro's number is constant irrespective of mass of the gases that are involved.

Answer:

The answer is in the explanation.

Explanation:

A buffer is defined as the aqueous mixture of a weak acid and its conjugate base or vice versa. Buffers are able to avoid the pH change of a solution when strong acid or bases are added (As NaOH).

Based on the experiment, it is possible that the solution Z was a buffer and Y another kind of solution. For this reson, pH of the solution Y changes much more than the pH of solution Z changes despite the amount of NaOH added is the same in both solutions.

Answer: The final equation has hydroxide ions which indicate that the reaction has occurred in a basic medium.

Explanation:

Redox reaction is defined as the reaction in which oxidation and reduction take place simultaneously.

The oxidation reaction is defined as the reaction in which a chemical species loses electrons in a chemical reaction. It occurs when the oxidation number of a species increases.

A reduction reaction is defined as the reaction in which a chemical species gains electrons in a chemical reaction. It occurs when the oxidation number of a species decreases.

The given redox reaction follows:

[tex]MnO_4^-(aq)+NO_2^-(aq)\rightarrow MnO_2(s)+NO_3^-(aq)[/tex]

To balance the given redox reaction in basic medium, there are few steps to be followed:

Oxidation half-reaction: [tex]NO_2^-+2OH^-\rightarrow NO_3^-+H_2O+2e^-[/tex]

Reduction half-reaction: [tex]MnO_4^-+2H_2O+3e^-\rightarrow MnO_2+4OH^-[/tex]

Oxidation half-reaction: [tex]NO_2^-+2OH^-\rightarrow NO_3^-+H_2O+2e^-[/tex]         ( × 3)

Reduction half-reaction: [tex]MnO_4^-+2H_2O+3e^-\rightarrow MnO_2+4OH^-[/tex]             ( × 2)

The half-reactions now become:

Oxidation half-reaction: [tex]3NO_2^-+6OH^-\rightarrow 3NO_3^-+3H_2O+6e^-[/tex]

Reduction half-reaction: [tex]2MnO_4^-+4H_2O+3e^-\rightarrow 2MnO_2+8OH^-[/tex]

Overall redox reaction: [tex]3NO_2^-+2MnO_4^-+H_2O\rightarrow 3NO_3^-+2MnO_2+2OH^-[/tex]

As we can see that in the overall redox reaction, hydroxide ions are released in the solution. Thus, making it a basic solution

Answer:

flora eat food

Explanation:

because that what every living thing eats to grow.

Answer:

sugar??

Explanation:

plants photosynthesise to make their own food (mainly glucose) to be transported around the plant

Answer:

36704 $

Explanation:

First we calculate how much the worker gets paid in one week:

Then we calculate how many weeks does the worker work in 1.7 years:

Finally we calculate how much does the worker make in 1.7 years:

The element nitrogen exists as a gas  and is  obtained from air on a large scale​ by fractional distillation of air.

An element is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.

Learn more about element,here:

https://brainly.com/question/14347616

#SPJ2

Answer:

sending heat waves and vibrations

Answer:

Correct answer would be Option 2, Chemical Energy

Hope this helps!

Answer:

150

Explanation:

We can find the equivalent number of O₂ molecules for 100 molecules of CO₂ using a conversion factor containing the stoichiometric coefficients of the balanced reaction, as follows:

150 molecules of O₂ would produce 100 molecules of CO₂.

Answer:

See explanation and image attached

Explanation:

The image attached shows the entire scheme of reactions mentioned in the question.

The first reaction is an addition reaction which yields a tertiary alkyl halide as shown in accordance with Markovnikov rule.

The second reaction is a dehydrohalogenation in which the base abstracts a proton from the alkyl halide followed by loss of a bromide ion to yield the corresponding alkene.

This alkene is an isomer of the starting material.

Answer:

4

Explanation:

Answer:

180 amu

C₆H₁₂O₆

Explanation:

Step 1: Determine the molecular mass of the compound

The sample has a mass (m) of 3.06 g and it contains (n) 0.0170 moles. The molar mass M is:

M = m/n = 3.06/0.0170 mol = 180 g/mol

Then, the molecular mass is 180 amu.

Step 2: Determine the molar mass of the empirical formula.

M(CH₂O) = 1 × M(C) + 2 × M(H) + 1 × M(O)

M(CH₂O) = 1 × 12 g/mol + 2 × 1 g/mol + 1 × 16 g/mol = 30 g/mol

Step 3: Determine the molecular formula

First, we will determine "n" according to the following expression.

n = molar mass molecular formula / molar mass empirical formula

n = 180 g/mol / 30 g/mol = 6

The molecular formula is:

n × CH₂O = 6 × CH₂O = C₆H₁₂O₆

Answer:

The equation: (NH₄)₂SO₄ = 2NH4(+) + SO4(-2)

The number of moles = 5 g / 132.14 g/mol = 0.038 mol

The number of molecules = 0.038 X 6.022x10^23 = 2.29x10^23

the number of positive ions present in the ammonium sulphate solution:

2 positive ions for every 1 molecule of (NH₄)₂SO₄

so 2 x 2.29x10^23 = 4.58x10^23

the number of negative ions present in the ammonium sulphate solution

1 negative ion for every 1 molecule of (NH₄)₂SO₄

so 1 x 2.29x10^23 = 2.29x10^23

the total number of ions present in the ammonium sulphate solution​

4.58x10^23 + 2.29x10^23 = 6.87x10^23

Answer:

7.16 × 10⁻³ M

Explanation:

Let's consider the reduction reaction of copper during the electroplating.

Cu²⁺(aq) + 2 e⁻ ⇒ Cu(s)

We can calculate the moles of Cu²⁺ present in the solution using the following relations.

The moles of Cu²⁺ reduced are:

[tex]2.30 min \times \frac{60s}{1min} \times \frac{3.00C}{s} \times \frac{1mole^{-} }{96486C} \times \frac{1molCu^{2+} }{2mole^{-} } = 2.15 \times 10^{-3} molCu^{2+}[/tex]

[tex]2.15 \times 10^{-3} moles[/tex] of Cu²⁺ are in 0.300 L of solution.

[Cu²⁺] = 2.15 × 10⁻³ mol/0.300 L = 7.16 × 10⁻³ M

Answer:

23.2 kJ of energy are released by the reaction.

Explanation:

Hello there!

In this case, according to the given information, it turns out firstly necessary for us to calculate the moles of both tin and nitrogen and the produced moles of Sn3N4 product by each reactant as shown below:

[tex]13.1gSn*\frac{1molSn}{119gSn} *\frac{1molSn_3N_4}{3molSn} =0.0367molSn_3N_4\\\\2.715gN_2*\frac{1molN_2}{28gN_2} *\frac{1molSn_3N_4}{2molN_2} =0.0485molSn_3N_4[/tex]

Thus, since 13.1 grams of tin produce the fewest moles of Sn3N4 product, we infer tin is the limiting reactant, and the correct produced energy, due to this reaction is:

[tex]E=632\frac{kJ}{mol\ rxn}*\frac{1mol\ rxn}{1molSn_3N_4}*0.0367mol Sn_3N_4\\\\E=23.2kJ[/tex]

Regards!

Cross primary components of vascular tissue are the xylem and phloem. These two tissues transport fluid and nutrients internally. There are also two meristems associated with vascular tissue: the vascular cambium and the cork cambium. All the vascular tissues within a particular plant together constitute the vascular tissue system of that plant.

Answer:

The most intense line in the emission spectrum for sodium appears at a wavelength of 589 nm.

What color would you expect to observe when a solution that contains sodium ions is heated strongly in the flame of a Bunsen burner?

Explanation:

Put a clean wire loop in a solid sample of the compound containing sodium ions, then keep it on the blue flame of the Bunsen burner.

The color of sodium ions in the Bunsen burner shows charactrestic yellow color.