What conditions can impact the ecological tolerance of a species?
Pls Answer,30 points

Answers

Answer 1

Answer:

climatic changes

ambient changes

human interferance and the growt of cities and human civilization

and invasive especies

Explanation:

Answer 2

Many different physical factors can impact the ecological tolerance of a species like:-

temperature humidity soil chemistry pHsalinity oxygen levels

How physical factors impact the ecological tolerance of a species?Climatic factors such as temperature and precipitation are key drivers to control species distribution directly.Topographic features such as slope and elevation can impact local climate as well as soil conditions that in turn have varied effects on vegetation structure.The relative distance from a water source can also affect the composition and distribution of woody vegetation because of the resulting varying amount of water available for growth. Physical and chemical soil properties can inform vegetation patterns on a local scale.What is a tolerance range?

The portion of the abiotic factor's range of variation which a species can survive and function in is commonly defined as the tolerance range.

To know more about ecological tolerance here

https://brainly.com/question/26471341

#SPJ2


Related Questions

differniate between Magnetic force and electrostatic force​

Answers

Answer:

magnetic force:

i) It is exerted by a magnet.

ii)Magnetic forces are always normal to the direction of the velocity of the charge it acts upon.

Electrostatic force

i) It is exerted by electrically charged body.

ii)Electric force are independent of the direction the charge moves in.

✌✌✌✌

The direction of applied force has to be .............. to the distance in order to say work is done​

Answers

Answer:

Parallel

Explanation:

The work done is defined as the force applied on an object and the displacement in the position of the object in the direction of force.

W = F s cos A

where, F is the force, s is the displacement and A is the angle between force and displacement.

When the angle between the force and the displacement is 90 degree, the work done is zero.

To get the maximum work the angle between the force and the displacement is 0 degree.

So, to get the work done by the force the angle between the force and displacement is 0 degree that means the force and displacement is parallel to each other.

What is not one of the main uses of springs?
A. Bike suspension
B. The seasons
C. Clock making
D. Car suspension

Quick answer

Answers

Answer:

b. the seasons

Explanation:

5. Which one of the following factors is directly proportional to density of liquid? (a) Temperature (b) Volume of liquid (c) Upthrust (d) Density of object

Answers

Answer:

A

The upthrust on a floating body is in upwards direction and is equal to the weight of the liquid displaced

B

The upthrust is directly proportional to the density of the liquid in which the solid is immersed

C

The upthrust is directly proportional to the volume of the fluid displaced by a solid

The upthrust acts on the body in upward direction at the center of buoyancy.

Upthrust is equal to the weight of liquid displaced by object and weight of liquid will depend on its density.

Upthrust is F=Vρg ,where V is the volume of liquid displaced and ρ is the density of fluid.

The total lateral pressure acting on an immersed object on one side is equal and in opposite direction to the total lateral pressure acting on the other side.

Wagonium-292 has a half-life of 1 hour. If you started with an 80 gram sample, how much Wagonium-292 will remain after 4 hours? A.) 10g B.) 40g C.) 160g D.) 5G

Answers

After 1 hour, 80 g decays to 40 g.

After another hour (total 2 hours), 40 g decays to 20 g.

After another hour (total 3), 20 g decays to 10 g.

After one more hour (total 4), 10 g decays to (D) 5 g.

Does water exist on Mars? Explain your answer. Why didn't Jupiter become a star during the early.​

Answers

Answer:

yes water was discovered in mars

why does a stone sink and a ship float

Answers

Answer:

A stone is more dense than water and the air in draft of the boat is less dense than water.

Please help me , I also have to show work on paper

Answers

Answer:

Choose B

Explanation:

Hope Can I help you

difference between uniform motion and non uniform motion

Answers

Answer:

Uniform motion is a type of motion that is characterized as the motion of an object wherein the object moves in a straight line and its velocity remains unchanged along that line, regardless of the duration of time, as it occupies equal distances at equal time interval and Non-uniform motion is described as the motion of an object wherein the object moves at different speeds and does not cover the same distance at equal time intervals, regardless of the duration of the time interval.

Answer:

hope it's help you

Explanation:

In Uniform motion, the movement of a body is along the straight line with constant speed. In non uniform motion, the movement of a body is along the straight line with variable speed. In uniform motion, the body covers equal distance in an equal interval of time.

What is one Pascal pressure? What is its unit?​

Answers

Explanation:

the force acting perpendicularly on unit area of surface

unit=pascle .

A pressure of one Newton per square meter .. The SI unit of 1 Pascal pressure is 1 Newton per square metre .

HELP ASAP!!!
What size object (impactor) may create such a crater?

Answers

Answer:

I HOPE IT WILL HELP YOU.

:D

Our Moon a. was a separate small planet before it was captured by the Earth's gravity. b. spun off the fast-spinning Earth during the early formation of the Solar System. c. coalesced from gas and dust in its current place next to the Earth. d. was formed by the collision of the Earth with a Mars-sized protoplanet.

Answers

Answer:

d. was formed by the collision of the Earth with a Mars-sized protoplanet.

According to the The giant-impact hypothesis the Moon was formed from the debris of a collision between the Earth and a Mars-sized protoplanet.

Is velocity ratio of a machine affected by applying oil on it? Explain with reasons.

Answers

Answer:

when it comes to machines being Rusty oil is like the root loosener

set up differential equation of angular S.H.M​

Answers

Answer:

[tex]{ \sf{ \omega \: is \: the \: angular \: velocity}} \\ { \sf{ \theta \: is \: the \: angular \: displacement}}[/tex]


What kind of circuit is the one shown below?
A. Series
B. Parallel
C. Open
D. Combination

Answers

That's a parallel circuit. (B)

When current from Point-A reaches the 3-way intersection just to the right of Point-B, it has to make a choice:  Either turn left, go through B, and light the lower bulb, or go straight and light the upper bulb.

A circuit that has any "decision" points in it is a parallel circuit.  What happens in the real world is:  The current splits up.  Some of the current that reaches the intersection turns left toward Point-B, and the rest of it goes straight up.

A series circuit is one in which there's only one possible path all the way around.  There are no intersections of more than 2 roads, and no electron ever has to decide which way to flow.

An open circuit is one in which there's a break somewhere along the line and electrons can't jump across it.  It's like a railroad where a big piece is cut out of the track somewhere.  So no trains can travel on that route, and there's no current flowing anywhere in the circuit.

I'm not so sure about a "combination" circuit.  I guess you could give that name to a complicated circuit that has some series parts and some parallel-parts.  Personally, I'd call that a "series-parallel" circuit.  But it really doesn't matter right now.  Whatever the word means, the circuit in the picture is definitely not a "combination" circuit.

Answer:

B. Parallel Circuits

Explanation:

A parallel circuit is constructed by connecting the terminals of all the individual load devices so that the same value of voltage appears across each component. In a parallel circuit, charge divides up into separate branches such that there can be more current in one branch than there is in another.

hope i helped

Which of the following is a contact force?

A. applied
B. electromagnetic
C. nuclear
D. gravity

Answers

applied force is a contact force

The answer is A- applied

An applied force is a force that is applied to an object by a person or another object. If a person is pushing a desk across the room, then there is an applied force acting upon the object. The applied force is the force exerted on the desk by the person. Gravity Force.

Saul is testing an installation and discovers a short circuit what’s causing this
A.high current

B.high voltage

C.low resistance

D.low voltage

Answers

Answer:
C. Low resistance

Answer:

im pretty sure that it's (A.) High current

Explanation:

pf

not 100% sure, tho

is there any machine that is 100% efficient? why?why not

Answers

Answer:

No, it's not there.

Explanation:

For a machine to be 100% efficient, it has to be with an output which is equal to its input. But machines have an out put less than an input, hence efficiency below 100%.

A bike travels at 3.0 m/s, and then accelerates to a speed of
8.5 m/s in a time of 2.5 seconds. The average acceleration of
the bike is
m/s2

Answers

The average acceleration of the bike is 2.2 m/s²

What is average acceleration?

Acceleration, rate at which velocity changes with time, in terms of both speed and direction.

A point or an object moving in a straight line is accelerated if it speeds up or slows down.

According to the question,

Given, initial velocity, u=3.0m/s and final velocity v=8.5 m/s

Time = 2.5 seconds

If a be the acceleration.

a = [tex]\frac{v-u}{t}[/tex]

a = [tex]\frac{8.5 - 3.0}{2.5s}[/tex]

⟹ a=2.2 m/s²

So, The average acceleration of the bike is 2.2 m/s²

Learn more about average acceleration here:

https://brainly.com/question/2303856

#SPJ2

Which nucleus completes the following equation?
Please ignore the answer I chose, it might be wrong

Answers

Answer:

D. [tex]^{39}_{18} Ar[/tex]

Explanation:

The given nuclear equation is the beta decay of chorine in which an electron, known as a beta particle, is given off from within the nucleus due to the breakdown of a neutron within the nucleus into a proton and a beta particle, such that the atomic number is increased by 1 from 17 to 18, which is the atomic number or argon, Ar, as follows;

[tex]^{39}_{17}Cl \ \rightarrow \ ^0_{-1} e + \ ^{39}_{18} Ar[/tex]

The mass of earth 6*10^24kg and radius is 400kg Now find the value of acceleration due to gravity when a object is 3600km from the earth surface​

Answers

i don’t worry wewwwww it is a good time to get it done lol lol i don’t worry about it lol lol i lol

the force between the earth and the body which is at a distance r from the center of the earth is F. What must be this distance for the force to be doubled.

Answers

Answer:

Explanation:

The gravitational force between the earth and another body is F = -GM_em/r^2 r where G = 6.67 times 10^-11 Nm^2/kg^2 is the gravitational constant, M_e = 5.97 times 10^24 kg is the mass of the earth, m is the mass of the other body, and r is the position vector of the second body with respect to the centre of the earth.

What is meant by the term wave front?

Answers

Explanation:

Wave front, imaginary surface representing corresponding points of a wave that vibrate in unison. ... Wave fronts for longitudinal and transverse waves may be surfaces of any configuration depending on the source, the medium, and the obstructions encountered.

why does balloon pop in the sun? ​

Answers

Answer:

The heat gives atoms/ particles in balloon more kinetic energy so they move further apart, increasing size and eventually popping balloon

^ very simple explanation

Explanation:

Which type of wires (copper, aluminum, or string) are ferromagnetic metals?

Answers

Answer:

Copper isn't ferromagnetic,

Aluminum isn't ferromagnetic,

String has a ferromagnetic property

So in conclusion:

The answer is strings :)

Give reason Pascal is a derived unit​

Answers

The pascal is the SI derived unit of pressure used to quantify internal pressure, stress, Young's modulus and ultimate tensile strength.

Symbol ⇥ Pa

A merry-go-round rotates with a centripetal acceleration of 18 m/s^2. If the outer horses are 9 m from the center of the ride. What is their velocity?
A. 12.7 m/s
B. 14.6 m/s
C. 16.3 m/s
D. 10.4 m/s

Answers

Answer:

A

Explanation:

a_c = v^2/r

v = sqrt*a_c × r*

v = sqrt * 18 × 9*

v = 9×sqrt *2*

v = 12. 7 m/s

An airplane starts from rest and undergoes a uniform acceleration of 10.8 m/s^2 for 16.7 s seconds before leaving the ground. What is its displacement?

Answers

Answer:

3012.012m

Explanation:

s=it +1/2(10.8)(16.7)^2

A car generator turns at 400 rpm (revolutions per minute) when the engine is idling. It has a rectangular coil with 300 turns of dimensions 5.00 cm by 6.46 cm that rotates in an adjustable magnetic field. What is the field strength needed to produce a 24.0 V peak emf

Answers

Answer:

The field strength needed to produce a 24.0 V peak emf is 0.5913 T

Explanation:

From the formula for maximum emf of a generator,

[tex]emf_{max}= NAB\omega[/tex]

∴ [tex]B = \frac{emf_{max} }{NA\omega}[/tex]

Where N is the number of loops

A is cross section of loops

B is magnetic field strength

ω is the angular frequency of loops

From the question, [tex]emf_{max} = 24.0V[/tex]

N = 300 turns

A = l × b ( since it is a rectangular coil)

A = 6.46 cm × 5.00 cm

A = 0.0646 m × 0.05 m

A = 0.00323 m²

ω = 400 rpm = (400/60)×2π rad/s

ω = 41.8879 rad/s

Putting all the parameters into the formula

[tex]B = \frac{emf_{max} }{NA\omega}[/tex]

[tex]B = \frac{24.0}{300\times0.00323\times41.8879}[/tex]

[tex]B = 0.5913T[/tex]

Hence, the field strength needed to produce a 24.0 V peak emf is 0.5913 T

S/REF No. Date If the load distance of a level is 20 cm and effort distance is 6ocm, calculate the amount of effort required to lift a load 200 N.​

Answers

The answer is 602 cause I added
Other Questions
A scientist is observing onion cells and human cheek cells under a microscope.Which observation does she most likely make?A. The onion cells have lysosomes, and the cheek cells do not.B. The cheek cells have larger vacuoles than the onion cells.C. The cheek cells have a nucleus, and the onion cells do not.D. The onion cells have a cell wall, and the cheek cells do not. find the area of this unusual shape An increasing number of states have adopted a federal form of government primarily to grant different ethnicities or nationalities more effective representation. encourage the breakup of international military and economic alliances. deploy scarce resources efficiently. govern compact states more effectively. accommodate right wing political parties and their demands for increased representation in national elections. The edge roughness of slit paper products increases as knife blades wear. Only 2% of products slit with new blades have rough edges, 3% of products slit with blades of average sharpness exhibit roughness, and 4% of products slit with worn blades exhibit roughness. If 25% of the blades in the manufacturing are new, 60% are of average sharpness, and 15% are worn, what is the proportion of products that exhibit edge roughness the diameter of a bicycle wheel is 71 cm. calculate the circumference of the wheel Nos permiten representar regiones de inters a diferentes escalas Quick can someone plot these in a scatter plot (9.2,2.33)(19.5,3.77)(15.5,3.92)(0.7,1.11)(21.9,3.69)(0.7,1.11)(16.7,3.5)(0.7,1.11)(18,4)(18,3.17) What event or factor made Sparta a special polis? According to the National Information Infrastructure Protection Act of 1996, the severity of the penalty for computer crimes depends on the value of the information obtained and whether the offense is judged to have been committed for each of the following except __________. a. to harass b. for purposes of commercial advantage c. in furtherance of a criminal act d. for private financial gain The annual benefits of $4000 every year for three years may be obtained for an investment on a production equipment costing $20,000 with a salvage value of $5,000. If MARR is 6%, choose the right equation to determine the NPW.A) NPW = 20,000(F/P,6%,3) + 4,000(F/A, ^%, 3) + 5000B) NPW = -20000 + 4000(P/A,6%,3) + 5000(P/F,6%,3)C) NPW = 20,000(P/F,6%,3) + 4000(F/A,6%,3) + 5000D) -20000(P/F,6%,3) +4000(P/A,6%,3) + 5000(P/F,6%,3) does this table represent a function? Why or why not?X: 2 2 3 4 5Y: 1 4 4 2 5Please answer it ASAP who were in the second team F(x)=-x^2+2mx+2m-3 with x solve/ Find the area. If the scale on the map is 1cm :112 km. If two places are 197 miles apart. How far apart are they on a map WILL GIVE BRAINLIEST IF CORRECT The breeds of dogs are allone species, but they haveincredible genetic diversity.Who first realized thatvariation mattered, eventhough he didn't know theexact mechanism?A. LamarckB. AristotleC DarwinD. Griffith Answer the question based on this waveform.A wave has a velocity of 24 m/s and a period of 3.0 s.Choose the correct amplitude.1/2 m1/72 m3 mCannot be determined from the given information Tammy hasn't exercised regularly for the past couple of years, but during the last week of October she purchases running shoes, shorts and tank tops to run in and she coordinates her schedule with her sister's schedule so that they can run together. She hopes to run regularly with her sister in a couple of months. In fact, starting in January they hope to start because they both have 2 weeks off from work at the beginning of the new year. Tammy is likely in the ___________________ stage of the transtheoretical model. A force measuring instrument comes with a certificate of calibration that identifies two instrument errors and assigns each an uncertainty at 95% confidence over its range. Provide an estimate of the instrument design-stage uncertainty. Resolution: 0.25 N Range: 0 to 100 N Linearity error: within 0.20 N over range Hysteresis error: within 0.30 N over range