What are the roles of chlorophll, light, carbon dioxide, and water in the production of food and oxygen for a plant? (15 points to answer)

Answer:

carbon mono oxide CO

Explanation:

as both are in 1:1 ratio so CO is formed

Answer:

What's the rest of the question

Explanation:

Answer:

the  molar mass of the compound is  34.0 g /mol

Explanation:

The computation of the molar mass of the compound is as follows:

As we know that

PV = nRT

n = mass ÷ MW

PV = mRT ÷ MW

It can be rearrange as

MW = mRT ÷ (PV)

MW = (0.941)(0.082)(150 + 273) ÷ (1 × 0.96)

= 33.99g/mol

= 34.0 g /mol

Hence, the  molar mass of the compound is  34.0 g /mol

Answer:

C. 100.7 amu

Explanation:

Isotopes of an element are atoms of an element with the same atomic number but different atomic masses. Each atomic mass of an isotope is known as an isotopic mass. An element that exhibits isotope, that is, that have two or more isotopes has a relative atomic mass that is not a whole number.

Relative atomic mass of X is the sum of the products of the relative abundances of each isotope and its isotopic mass.

For Isotope ¹⁰⁰X: 30% × 100 = 30 amu

For Isotope ¹⁰¹X: 70% × 101 = 70.7 amu

Relative atomic mass of X = (30 + 70.7) amu = 100.7 amu

Therefore, the approximate atomic mass of X is 100.7 amu

Taking into account the definition of mass number, isotopes and atomic mass of an element, the average mass of hypothetical element X is 100.7.

First of all, all atoms are made up of subatomic particles: protons and neutrons, which are part of their nucleus, and electrons, which revolve around them. Protons are positively charged, neutrons are neutrally charged, and electrons are negatively charged (electrons).

On the other hand, the mass number tells us the total number of particles in the nucleus. That is, the mass number is the sum of the number of protons and the number of neutrons in the atomic nucleus.

The same chemical element can be made up of different atoms, that is, their atomic numbers are the same, but the number of neutrons is different. These atoms are called isotopes of the element.

Finally, the atomic mass of an element is the weighted average mass of its natural isotopes.

In other words, the atomic masses of chemical elements are usually calculated as the weighted average of the masses of the different isotopes of each element, taking into account the relative abundance of each of them.

In this case, two isotopes of hypothetical element X exist with abundances of 30.00% 100-X (the atomic mass is 100) and 70.00% 101-X (the atomic mass is 101).  Then, the average mass of X can be calculated as:

100×0.30 + 101×0.70= 100.7

Finally, the average mass of hypothetical element X is 100.7.

Learn more about average mass:

Answer:

i do k12 too!

Explanation:

lol

Answer:

C. are found in the nucleus of an atom

Explanation:

Protons and Neutrons are always located at the center of the atom also called as the nuclei of the atom and constitute nearly all the mass of the atom, while the electrons revolve around them in orbits called shells. Only protons have a positive charge and electrons have negative charges, due to which only protons and electrons attract each other, while neutrons lack charges or have 'Neutral Charges'.

thermal contact

When heat flows from one object or substance to another it is in contact with, the objects or substances are said to be in thermal contact. The state where objects in thermal contact with each other reach the same temperature, no heat flows between them.

Answer:

bottom right corner with arrows going up

Answer:

Can I have the answer choices?

Explanation:

I think I know what it is but I want to be sure

Answer:

The answer is c, Clouds fill with moisture and get too hravy

The characteristic that could distinguish a crystalline solid from an amorphous solid is option b. The way it breaks.

Crystalline solids contained edges and faces, that should be diffracted x-rays, and have sharp melting points.

While on the other hand, amorphous solids should contain irregular does not provide well-resolved x-ray diffraction patterns.

hence, the option b is correct.

And, the rest of the options are wrong.

Learn more about solid here: https://brainly.com/question/17435895

Answer:

P4O10

Explanation:

Answer:

3.68 g/cm3

Explanation:

D = M / V

350 / 95

Answer:

18.84 g of silver.

Explanation:

We'll begin by calculating the number atoms present in 5.59 g of sulphur. This can be obtained as follow:

From Avogadro's hypothesis,

1 mole of sulphur contains 6.02×10²³ atoms.

1 mole of sulphur = 32 g

Thus,

32 g of sulphur contains 6.02×10²³ atoms.

Therefore, 5.59 g of sulphur will contain = (5.59 × 6.02×10²³) / 32 = 1.05×10²³ atoms.

From the calculations made above, 5.59 g of sulphur contains 1.05×10²³ atoms.

Finally, we shall determine the mass of silver that contains 1.05×10²³ atoms.

This is illustrated below:

1 mole of silver = 6.02×10²³ atoms.

1 mole of silver = 108 g

108 g of silver contains 6.02×10²³ atoms.

Therefore, Xg of silver will contain 1.05×10²³ atoms i.e

Xg of silver = (108 × 1.05×10²³)/6.02×10²³

Xg of silver = 18.84 g

Thus, 18.84 g of silver contains the same number of atoms (i.e 1.05×10²³ atoms) as 5.59 g of sulfur

Answer: In the case of water, we know that the O-H covalent bond is polar, due to the different electronegativities of hydrogen and oxygen. Since there are two O-H bonds in water, their bond dipoles will interact and may result in a molecular dipole which can be measured.

Explanation:

Protons,neutrons,electrons

Answer:

35.453 amu.

Explanation:

From the question given above, the following data were obtained:

Isotope A (Cl–35):

Abundance (A%) = 75.77%

Mass of A = 34.969 amu

Isotope B (Cl–37):

Abundance (B%) = 24.23%

Mass of B = 36.966 amu

AVERAGE atomic mass of Cl =?

The average atomic mass of Cl can be obtained as follow:

Average = [(Mass of A × A%)/100] + [(Mass of B × B%)/100]

Average = [(34.969 × 75.77)/100] + [(36.966 × 24.23)/100]

Average = 26.496 + 8.957

Average atomic mass of Cl = 35.453 amu.

The [H₃0⁺] of the solution : 1.778  x 10⁻¹² M

pH is the degree of acidity of a solution that depends on the concentration of H⁺ ions. The greater the value the more acidic the solution and the smaller the pH.  

pH = - log [H⁺]  

So that the two quantities between pH and [H⁺] are inversely proportional because they are associated with negative values.  

A solution whose value is different by n has a difference in the concentration of H⁺ ion of 10ⁿ.  

pH of solution = 11.75

the [H₃0⁺] of the solution :

[tex]\tt pH=-log[H_3O^+]\\\\11.75=-log[H_3O^+]\\\\(H_3O^+]=10^{-11.75}=1.778\times 10^{-12}[/tex]

Answer:

Static electricity is transferred during charging by conduction when electrons from a charged from one object to another object by direct contact. For example, on a carpet, charges are transferred from a person's feet to the rest of his/her body.

Answer:

dunno

Explanation:

Hi there! :)

[tex]\large\boxed{x = 2.49 L}[/tex]

Use the proportion for Charles' Law where:

[tex]\frac{v_{1}}{t_{1}}= \frac{v_{2}}{t_{2}}[/tex]

v1 = initial volume

t1 = initial temperature

v2 = final volume

v2 = final temperature

Substitute in the given values into the proportion:

v1 = 4.39 L

t1 = 44° C

t2 = 25°C

v2 = x L

Set up the proportion:

[tex]\frac{4.39}{44} = \frac{x}{25}[/tex]

Cross multiply:

[tex]25 * 4.39 = 44x\\\\109.75 = 44x\\\\x = 2.49 L[/tex]

Answer:

The new volume will be approximately 2.49 L.

Explanation:

We are given that a gas sample occupies 4.39 L at 44° C.

We are also given that we are going decrease the temperature to 25° C.

Charles' Law has a formula which shows the relationship between the volumes of a samples and the temperatures of the samples.

The proportion is shown as:

[tex]\displaystyle \bullet \ \ \ \frac{V_1}{T_1} = \frac{V_2}{T_2}[/tex],

where V₁ and V₂ are the initial and final volume respectively and T₁ and T₂ are the initial and final temperature respectively.

This proportion can be used to determine what our unknown is. We need to know the final volume.

[tex]\displaystyle \frac{4.39 \ \text{L}}{44 \ \text{C}} = \frac{\text{x}}{25 \ \text{C}}\\\\\\\frac{4.39}{44} = \frac{x}{25}\\\\\\4.39 \times 25 = 44 \times x\\\\\\44x = 109.75\\\\\\\frac{44x}{44}=\frac{109.75}{44}\\\\\\x = 2.49432 \approx \boxed{2.49 \ \text{L}}[/tex]

Therefore, if we reduce the temperature to 25 °C, we will be reducing the volume of the substance to 2.49 L.

Answer:

Matter is Made up of Chemical Energy..

Answer:

[tex]\huge\boxed{\sf Chemical}[/tex]

Explanation:

Matter is made up of atoms. Atoms contain chemical bonds which hold up the atoms together. These chemical bonds store chemical energy in themselves. Hence Matter is made up of chemical energy and heat energy.

Light energy have no relation with matter. Remember, Light is not a matter and matter is not light.

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer: The empirical formula is [tex]NaBO_2[/tex]

Explanation:

If percentage are given then we are taking total mass is 100 grams.

So, the mass of each element is equal to the percentage given:

Mass of Na= 34.5 g

Mass of B= 16.4 g

Mass of O = 48.6 g

Step 1 : convert given masses into moles.

Moles of Na =[tex]\frac{\text{ given mass of Na}}{\text{ molar mass of Na}}= \frac{34.5g}{23g/mole}=1.5moles[/tex]

Moles of B =[tex]\frac{\text{ given mass of B}}{\text{ molar mass of B}}= \frac{16.4g}{11g/mole}=1.5moles[/tex]

Moles of O =[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{48.6g}{16g/mole}=3moles[/tex]

Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.

For Na = [tex]\frac{1.5}{1.5}=1[/tex]

For B = [tex]\frac{1.5}{1.5}=1[/tex]

For O =[tex]\frac{3}{1.5}=2[/tex]

The ratio of Na: B: O= 1: 1: 2

Hence the empirical formula is [tex]NaBO_2[/tex]

Answer:

Black plastic

Explanation:

The color black absorbs more heat than any other color.

Answer:

plastic

Explanation:

Answer:

After 3 half lives 10 g of radio active material left.

Explanation:

Given data:

Total amount of radio active material = 80 g

Amount left after 3 half lives = ?

Solution:

At time zero = 80 g

At first half life = 80 g/2 = 40 g

At 2nd half life = 40 g/2 = 20 g

At 3rd half life = 20 g/2 = 10 g

Thus, after 3 half lives 10 g of radio active material left.