What are stepdown transformers used for

Answer:

because minerals can be gotten from the bottom

Explanation:

it's self explanatory

Answer:

b.have frequencies that are integer multiples of the frequency of the complex waveform

Explanation:

Please correct me if I am wrong

Answer:

1

Explanation:

Electrolysis is the passing of an current through a conducting solution, when the occurs, a chemical reaction takes place.

Heating a chemical will always cause a chemical reaction, which is why 3 is also correct

Some information as to why 2 is NOT correct.

2 is NOT a chemical reaction, but rather a process of physical separation. It uses selective boiling and condensation, but is not considered a chemical reaction.

as with 3, heating is not considered a chemical reaction, but rather a physical temperature change. This is always what it is considered to be (e.g boiling water is a physical temperature change, not a chemical reaction)

Hope this helps.

Hope this helps.

Answer:

Answer

Correct option is

A

5×10

−6

tesla

I=5A

x=0.2m

Magnetic field at a distance 0.2 m away from the wire.

B=

2πx

μ

0

I

=

2π×0.2

4π×10

−7

×5

=10×5×10

−7

=5×10

−6

tesla

Answer:

how to solve this problem ???????

The magnitude of the resultant force is 919.6 N and the value of angle θ is 36.87⁰.

The resultant of the two forces is determined by resolving the force into x and y component as shown below;

[tex]F_1_x + F_2x_x = F_R_x \ --- (1) \\\\F_1_y + F_2_y = F_R_y\ ---(2)[/tex]

where;

The value of Angle θ is determined from equation (1)

-500sinθ + 600sin(30) = 0

500sinθ = 600sin(30)

500sinθ = 300

sinθ = 3/5

θ = 36.87⁰

The resultant of the forces is determined using the second equation;

500cosθ + 600cos(30) = R

500 x cos(36.87) + 600 x cos(30) = R

919.6 N = R

Learn more about resultant forces here: https://brainly.com/question/25239010

Answer:

The impact force is 98000 N.

Explanation:

mass = 10 tons

The impact force is the weight of the object.

Weight =mass x gravity

W = 10 x 1000 x 9.8

W = 98000 N

The impact force is 98000 N.

Answer:

Smaller and upside down

Explanation:

To answer the question, we must recognise that the characteristics of the image formed by a convex lens depends on the position of the object from the lens.

From the diagram given in the question above, the following data were obtained:

1. The image is smaller than the object.

2. The image is inverted i.e upside down.

3. The image is closer to the lens

4. The image between 2f and f

Now, considering the options given in question above, the correct answer to the question is:

The image is smaller and upside down.

Answer:

f = 1 m

Explanation:

The magnification of the lens is given by the formula:

[tex]M = \frac{q}{p}[/tex]

where,

M = Magnification = 4

q = image distance = 5 m

p = object distance = ?

Therefore,

[tex]4 = \frac{5\ m}{p}\\\\p = \frac{5\ m}{4}\\\\p = 1.25\ m[/tex]

Now using thin lens formula:

[tex]\frac{1}{f}=\frac{1}{p}+\frac{1}{q}\\\\\frac{1}{f} = \frac{1}{1.25\ m}+\frac{1}{5\ m}\\\\\frac{1}{f} = 1\ m^{-1}\\\\[/tex]

f = 1 m

Answer:

7.46×10⁻⁶ m

Explanation:

Applying,

F = kqq'/r²............ Equation 1

make r the subject of the equation

r = √(F/kqq').......... Equation 2

From the question,

Given: F = 8 N, q' = q= 4 C

Constant: k = 8.98×10⁹ Nm²/C²

Substitute these values into equation 2

r = √[8/(4×4×8.98×10⁹)]

r = √(55.7×10⁻¹²)

r = 7.46×10⁻⁶ m

Answer:

The velocities of the skaters are [tex]v_{1} = 3.280\,\frac{m}{s}[/tex] and [tex]v_{2} = 0.024\,\frac{m}{s}[/tex], respectively.

Explanation:

Each skater is not under the influence of external forces during process, so that Principle of Momentum Conservation can be used on each skater:

First skater

[tex]m_{1} \cdot v_{1, o} = m_{1} \cdot v_{1} + m_{b}\cdot v_{b}[/tex] (1)

Second skater

[tex]m_{b}\cdot v_{b} = (m_{2}+m_{b})\cdot v_{2}[/tex] (2)

Where:

[tex]m_{1}[/tex] - Mass of the first skater, in kilograms.

[tex]m_{2}[/tex] - Mass of the second skater, in kilograms.

[tex]v_{1,o}[/tex] - Initial velocity of the first skater, in meters per second.

[tex]v_{1}[/tex] - Final velocity of the first skater, in meters per second.

[tex]v_{b}[/tex] - Launch velocity of the meter, in meters per second.

[tex]v_{2}[/tex] - Final velocity of the second skater, in meters per second.

If we know that [tex]m_{1} = 70\,kg[/tex], [tex]m_{b} = 0.043\,kg[/tex], [tex]v_{b} = 32\,\frac{m}{s}[/tex], [tex]m_{2} = 58.5\,kg[/tex] and [tex]v_{1,o} = 3.30\,\frac{m}{s}[/tex], then the velocities of the two people after the snowball is exchanged is:

By (1):

[tex]m_{1} \cdot v_{1, o} = m_{1} \cdot v_{1} + m_{b}\cdot v_{b}[/tex]

[tex]m_{1}\cdot v_{1,o} - m_{b}\cdot v_{b} = m_{1}\cdot v_{1}[/tex]

[tex]v_{1} = v_{1,o} - \left(\frac{m_{b}}{m_{1}} \right)\cdot v_{b}[/tex]

[tex]v_{1} = 3.30\,\frac{m}{s} - \left(\frac{0.043\,kg}{70\,kg}\right)\cdot \left(32\,\frac{m}{s} \right)[/tex]

[tex]v_{1} = 3.280\,\frac{m}{s}[/tex]

By (2):

[tex]m_{b}\cdot v_{b} = (m_{2}+m_{b})\cdot v_{2}[/tex]

[tex]v_{2} = \frac{m_{b}\cdot v_{b}}{m_{2}+m_{b}}[/tex]

[tex]v_{2} = \frac{(0.043\,kg)\cdot \left(32\,\frac{m}{s} \right)}{58.5\,kg + 0.043\,kg}[/tex]

[tex]v_{2} = 0.024\,\frac{m}{s}[/tex]

Answer:

The two skaters move with a speed of 1.73 m/s after the collision in the right direction.

Explanation:

Given that,

The mas of skater 1, m₁ = 80 kg

The speed of skater 1, u₁ = 5 m/s (right)

The mass of skater 2, m₂ = 70 kg

The speed of skater 2, u₂ = -2 m/s (left)

Let v is the magnitude of the two skaters just after they collide. They must have a common speed. So, using the conservation of momentum as follows :

[tex]m_1u_1+m_2u_2=(m_1+m_2)v\\\\v=\dfrac{m_1u_1+m_2u_2}{(m_1+m_2)}[/tex]

Put all the values,

[tex]v=\dfrac{80(5)+70(-2)}{(80+70)}\\\\=1.73m /s[/tex]

So, the two skaters move with a speed of 1.73 m/s after the collision in the right direction.

Answer:

 T = 5.45 10⁻¹⁰   [tex]\sqrt{(R_e + h)^3}[/tex]

Explanation:

Let's use Newton's second law

          F = ma

force is the universal force of attraction and acceleration is centripetal

          G m M / r² = m v² / r

          G M / r = v²

as the orbit is circular, the speed of the satellite is constant, so we can use the kinematic relations of uniform motion

          v = d / T

the length of a circle is

          d = 2π r

we substitute

        G M / r = 4π² r² / T²

        T² = [tex]\frac{4\pi ^2 }{GM} \ r^3[/tex]

the distance r is measured from the center of the Earth (Re), therefore

        r = Re + h

where h is the height from the planet's surface

let's calculate

         T² = [tex]\frac{4\pi ^2}{ 6.67 \ 10^{-11} \ 1.991 \ 10^{30}}[/tex]   (Re + h) ³

         T = [tex]\sqrt{29.72779 \ 10^{-20}} \ \sqrt[2]{R_e+h)^3}[/tex]

         T = 5.45 10⁻¹⁰   [tex]\sqrt{(R_e + h)^3}[/tex]

Answer:

3.464 seconds.

Explanation:

We know that we can write the period (the time for a complete swing) of a pendulum as:

[tex]T = 2*\pi*\sqrt{\frac{L}{g} }[/tex]

Where:

[tex]\pi = 3.14[/tex]

L is the length of the pendulum

g is the gravitational acceleration:

g = 9.8m/s^2

We know that the original period is of 2.00 s, then:

T = 2.00s

We can solve that for L, the original length:

[tex]2.00s = 2*3.14*\sqrt{\frac{L}{9.8m/s^2} }\\\\\frac{2s}{2*3.14} = \sqrt{\frac{L}{9.8m/s^2}}\\\\(\frac{2s}{2*3.14})^2*9.8m/s^2 = L = 0.994m[/tex]

So if we triple the length of the pendulum, we will have:

L' = 3*0.994m = 2.982m

The new period will be:

[tex]T = 2*3.14*\sqrt{\frac{2.982m}{9.8 m/s^2} } = 3.464s[/tex]

The new period will be 3.464 seconds.

Answer:

c. 250k

Explanation:

The temperature of the sink is approximately 250 K.

To find the temperature of the sink, we can use the formula for the efficiency of a heat engine:

Efficiency = 1 - (Temperature of Sink / Temperature of Source)

Given that the temperature of the source (T_source) is 500 K and the source energy (Q_source) is 2003 J, and the sink energy (Q_sink) is 100 J, we can rearrange the formula to solve for the temperature of the sink (T_sink):

Efficiency = (Q_source - Q_sink) / Q_source

Efficiency = (2003 J - 100 J) / 2003 J

Efficiency = 1903 J / 2003 J

Efficiency = 0.9497

Now, plug the efficiency back into the first equation to solve for T_sink:

0.9497 = 1 - (T_sink / 500 K)

T_sink / 500 K = 1 - 0.9497

T_sink / 500 K = 0.0503

Now, isolate T_sink:

T_sink = 0.0503 * 500 K

T_sink = 25.15 K

Since the temperature should be in Kelvin, we round down to the nearest whole number, which is 25 K. Thus, the temperature of the sink is approximately 250 K.

To learn more about sink energy, here

https://brainly.com/question/10483137

#SPJ2

Answer: The correct statement is:

--> The voltage across each resistor is the same.

Explanation:

RESISTORS are defined as the components of an electric circuit which are capable of creating resistance to the file of electric current in the circuit. They work by converting electrical energy into heat, which is dissipated into the air. These resistors can be divided into two according to their arrangements in the electric cell. It include:

--> Resistors in parallel and

--> Resistors in series

RESISTORS are said to be in parallel when two or more resistance or conductors are connected to common terminals so that the potential difference ( voltage) across each conductor IS THE SAME but with different current flow through each of them. Also, Individual resistances diminish to equal a smaller total resistance rather than add to make the total.

Answer:

True. A permanent magnet like the earth produces its own B field due to movement of the iron core. The earths magnetic field is the reason why we have an atmosphere and it also is the only defense against solar flares. A coil of wire or solenoid that has current have so much moving charge that the motion of the electrical charge can create a significant G b-field

The time period of the spring is 2[tex]\pi[/tex][√(m/k)].

The spring constant of a spring is defined as the measurement of ratio of the force that is exerted on the spring to the displacement caused by it.

Here,

The mass of the block = m

Let F be the applied force on the spring and k be the spring constant.

When the mass attached to the spring is pulled to one side then released, it executes SHM.

Therefore we can write that, the applied force,

F = kx

Restoring force = -kx

According to Newton's law, we know that,

F = ma

So,

ma = -kx

Therefore, the acceleration,

a = (-k/m) x

For an SHM, the acceleration is given as,

a = -ω²x

Therefore, we can write that,

-ω²x = (-k/m) x

ω² = k/m

So, the time period of the spring,

T = 2[tex]\pi[/tex]/ω

T = 2[tex]\pi[/tex][√(m/k)]

Hence,

The time period of the spring is 2[tex]\pi[/tex][√(m/k)].

To learn more about spring constant, click:

https://brainly.com/question/20785296

#SPJ2

Answer:

978.6084 Newton

Explanation:

Given the following data;

To find the weight in Newtown;

Conversion:

1 lb = 4.448220 N

220 lb = 220 * 4.448220 = 978.6084 Newton

220 lb = 978.6084 Newton

Therefore, the weight of the astronaut in Newton is 978.6084.

Weight can be defined as the force acting on a body or an object as a result of gravity.

Mathematically, the weight of an object is given by the formula;

Weight = mg

Where;

Note:

Answer:

Explanation:

This is a simple Law of Momentum Conservation problem of the inelastic type. The equation for this is

[tex][m_1v_1+m_2v_2]_b=[(m_1+m_2)v]_a[/tex]  Filling in:

[tex][1200(4.5)+2100(0)]=[(1200+2100)v][/tex] which simplifies to

5400 + 0 = 3300v

so v = 1.6 m/s to the east, choice B

Answer:

The highest point in the trajectory occurs at the midpoint of the path. This highest point increases as the angle increases. At a 75° launch angle, the maximum height is approximately 76 meters. However, a further increase in launch angle beyond this 75° angle will increase the peak height even more.

Answer:

1.67 m

Explanation:

The potential energy change of the small ball ΔU equals the work done by the buoyant force, W

ΔU = -W

Now ΔU = mgΔh where m = mass of small ball = ρV where ρ = density of small ball and V = volume of small ball. Δh = h - h' where h = final depth of small ball and h' = initial height of small ball = 5 m. Δh = h - 5

ΔU = mgΔh

ΔU = ρVgΔh

Now, W = ρ'VgΔh'   where ρ = density of water and V = volume of water displaced = volume of small ball. Δh' = h - h' where h = final depth of small ball and h' = initial depth of small ball at water surface = 0 m. Δh' = h - h' = h - 0 = h

So, ΔU = -W

ρVgΔh = -ρ'VgΔh'

ρVg(h - 5) = -ρ'Vgh

ρ(h - 5) = -ρ'h

Since the density of the small ball equals 1/2 the density of water,

ρ = ρ'/2

ρ(h - 5) = -ρ'h

(ρ'/2)(h - 5) = -ρ'h

ρ'(h - 5)/2 = -ρ'h

(h - 5)/2 = -h

h - 5 = -2h

h + 2h = 5

3h = 5

h = 5/3

h = 1.67 m

So, the maximum depth the ball reaches is 1.67 m.

Answer: The statement that is not an example of convection is (A person gets a suntan on a beach).

Explanation:

There are different modes of heat energy transfer which includes:

--> conduction

--> Radiation and

--> Convection

CONVECTION is a process by which heat energy is transferred in a fluid or air by the actual movement of the heated molecules. The cooler portion of the air surrounding a warmer part exerts a buoyant force on it. As the warmer part of the air moves, it is replaced by cooler air that is subsequently warmed.

Convection in gases is very common and gas expands more than liquid when subjected to high temperature.

--> it is used in bringing about the circulation of fresh air in the room in a process known as ventilation.Here, cool air is constantly being replaced with denser air ( warm air).

-->An electric heater warms a room and Smoke rises above a fire are typical example of convection in gases.

-->Spaghetti is cooked in water: As the water close to the burner warms, it rises to the top and boils. At the same time, cooler water on top moves downward to replace the rising hot water.

--> also the eagle uses convection current to stay afloat in the sky without flapping its wings to conserve energy.

But the option (A person gets a suntan on a beach) is an example of heat transfer through radiation. This is because the sun emits it's rays from the sky down to earth without any material medium unlike others. Therefore, this option is the ODD one out.

Answer:

False

Explanation:

You have a circle so think back to circular motion. Theres 2 directions, centripetal and tangential. The problem tells you there's a constant tangential speed so tangential acceleration is 0. However there is a centripetal acceleration acting on the ball that holds it in its circular motion (i.e. tension, or gravity). Since centripetal is perpendicular to the tangential direction, acceleration and velocity are in different directions.

Answer:

Explanation:

[tex]E_0=1.5033×10^{-10}\:\text{J}[/tex]

Explanation:

The rest energy [tex]E_0[/tex] of a proton of mass [tex]m_p[/tex] is given by

[tex]E_0 = m_pc^2[/tex]

[tex]\:\:\:\:\:\:\:=(1.6726×10^{-27}\:\text{kg})(2.9979×10^8\:\text{m/s})^2[/tex]

[tex]\:\:\:\:\:\:\:=1.5033×10^{-10}\:\text{J}[/tex]

Answer:

The right solution is "[tex]4.5\times 10^{-10} \ Cm[/tex]".

Explanation:

Given that,

q = 0.50 nC

d = 900 mm

As we know,

⇒ [tex]P=qd[/tex]

By putting the values, we get

⇒     [tex]=0.50\times 900[/tex]

⇒     [tex]=(0.50\times 10^{-9})\times 0.9[/tex]

⇒     [tex]=4.5\times 10^{-10} \ Cm[/tex]  

Answer:

The dipole moment is 4.5 x 10^-10 Cm.

Explanation:

Charge on each ball, q = 0.5 nC

Length, L = 900 mm = 0.9 m

The dipole moment is defined as the product of either charge and the distance between them.

It is a vector quantity and the direction is from negative charge to the positive charge.

The dipole moment is

[tex]p = q L\\\\p = 0.5 \times 10^{-9}\times 0.9\\\\p = 4.5\times 10^{-10} Cm[/tex]

Answer:

0.5 V

Explanation:

The electric potential distance between different locations in an electric field area is unaffected by the charge that is transferred between them. It is solely dependent on the distance. Thus, for two electrons pushed together at the same distance into the same field, the electric potential will remain at 1 V. However, the electric potential of one of the two electrons will be half the value of the electric potential for the two electrons.

Answer:

(i)8m/s²(ii)40m/s

Explanation:

according to the formula

½at²=s.

then substituting the data

½a•5²=100

a=8m/s²

v=at=8•5=40m/s

Answer:

(I)

[tex]{ \bf{s = ut + \frac{1}{2} a {t}^{2} }} \\ 100 = (0 \times 5) + \frac{1}{2} \times a \times {5}^{2} \\ 200 = 25a \\ { \tt{acceleration = 8 \: m {s}^{ -2} }}[/tex]

(ii)

[tex]{ \bf{v = u + at}} \\ v = 0 + (8 \times 5) \\ { \tt{final \: velocity = 40 \: m {s}^{ - 1} }}[/tex]

Answer:

c)  N_s / N_p = 115.15

Explanation:

Let's look for the voltage in the secondary, they do not indicate the power dissipated

          P = V_s i

          V_s = P / i

          V_s = 76 / 5.5 10⁻³

          V_s = 13.818 10³ V

the relationship between the primary and secondary of a transformer is

           [tex]\frac{V_p}{N_p} = \frac{V_s}{N_s}[/tex]

           [tex]\frac{N_s}{N_p} = \frac{V_s}{V_p}[/tex]

           Ns / Np = 13,818 10³ /120

           N_s / N_p = 115.15