Assume that strike Counter has already been declared to be a "pointer to int". Assume further that strike Counter has been initialized -- its value is the address of some int variable. Write a statement that adds 22 to the value of the variable that strikeCounter is pointing to.
Answer:
The statement to this question can be defined as follows:
*strike_Counter =*strike_Counter +22;//adds value 22 in *strike_Counter
Explanation:
In the given question, it is already defined, that "strike_Counter" is an integer pointer variable, which means, it only holds the integer value in its address memory.
In the next step, it is defined, that it adds the value "22" in its variable, and for this, we declare the statement in the answer section, which adds the value.
for example, if in the "strike_Counter" variable holds the integer value, that is 5 and after adding the 22 it will become 27.
You administer your company's 100BaseTX Ethernet network. TCP/IP is the networking protocol used on the network. You want the routers on the network to send you notices when they have exceeded specified performance thresholds. Which protocol should you use to enable the routers to send the notices
Complete Question:
You administer your company's 100BaseTX Ethernet network. TCP/IP is the networking protocol used on the network. You want the routers on the network to send you notices when they have exceeded specified performance thresholds. Which protocol should you use to enable the routers to send the notices?
Group of answer choices
A. ARP
B. SMTP
C. SNMP
D. Telnet
Answer:
C. SNMP.
Explanation:
In this scenario, you administer your company's 100BaseTX Ethernet network. TCP/IP is the networking protocol used on the network. Also, you want the routers on the network to send you notices when they have exceeded specified performance thresholds. Hence, you should use the SNMP to enable the routers to send the notices.
SNMP is an acronym for simple network management protocol, which is a standardized application-layer protocol that is used for monitoring and organizing management information about network devices on either a wide area network (WAN) or local area network (LAN).
Basically, the SNMP helps to provide a common language for network devices such as switches, routers, printers, servers etc to share information with a network management system.
A simple network management protocol (SNMP) is part of the Transmission Control Protocol and Internet Protocol (TCP⁄IP) suite.
1) To point the lens of a camera up or down is called:
A) Arc
B)Dolly
C)Pan
D)tilt
Answer:
D)
Explanation:
Tilting is a cinematographic technique in which the camera stays in a fixed position but rotates up/down in a vertical plane.[1] Tilting the camera results in a motion similar to someone raising or lowering their head to look up or down. It is distinguished from panning in which the camera is horizontally pivoted left or right. Pan and tilt can be used simultaneously.[2] In some situations the lens itself may be tilted with respect to the fixed camera body in order to generate greater depth of focus. [3][4]
The camera's tilt will change the position of the horizon, changing the amount of sky or ground that is seen.[5] Tilt downward is usually required for a high-angle shot and bird's-eye view while a tilt upward is for a low-angle shot and worm's-eye view. The vertical offset between subjects can reflect differences in power, with superior being above.
are the network administrator for your company. You are installing a new printer in the network. When you check the print server properties, it displays the following error: Server properties cannot be viewed. The print spooler service is not running. What should you do to resolve the issue using the least administrative effort
Answer:
Will have to run the net start spooler command.
Explanation:
The printer spooler seems to be accountable for overseeing incoming faxes that have been in effect intended for handling by the printer. Whether this device stops operating, your printer won't publish documentation as well as the machine may not notice it either.To solve these problems, you'll need to run the net start spooler command using the least administrative effort.what are the uses of mobile phones?
Answer:
We use mobile phones to:
1. communicate with our friends and family
2. looking for the information/news in the world
3. looking for the material for study
and many others
may it helps^_^
Answer:
Mobile phones are used for a variety of purposes, such as keeping in touch with family members, for conducting business, and in order to have access to a telephone in the event of an emergency. Some people carry more than one mobile phone for different purposes, such as for business and personal use.
Explanation:
Plz mark me as brainiestYou find a list of websites that relate to your chosen topic and click on the first one. You ask yourself the three questions presented in this lesson to see if this site is reliable: 1) Who wrote it? There isn't an author listed anywhere that you can find. 2) What type of site is it? The site name ends in . 3) How current is the information? You see the site was updated yesterday. Is this website reliable and worth examining further? True or False?
Answer:
False
Explanation:
Information reliability is essential in production. sourcing information from a reliable source is base on several criteria. They are; the author of the resource file, the type of media platform holding the information, the frequent revision of the information, additional support or collaboration to publish public information, etc.
A government website ( with the site-address ending with a '.gov' ) which is concurrently revised by the institute, gives a piece genuine and reliable information, whereas a commercial website with no author and just recently revised or published, would be judged as an unreliable source of information
Which of the following statements are true of software engineers? Check all of the boxes that apply. They are responsible for writing programming code. They are usually strong problem-solvers. They spend most of their work hours running experiments in a laboratory. They must hold advanced degrees in computer science.
Answer:
First two statements: yes. Last two: not so much.
But many of the better ones do have advanced degrees, but some don't.
The laboratory statement is silly; they sit behind a set of screens figuring out stuff and writing code.
It should be noted that statements are true about software engineers are;
They are responsible for writing programming code. They are usually strong problem-solvers.Software engineering can be regarded as branch of computer science which is responsible for the development as well as the building of computer softwares, these could be applications software or system software.
The engineers that carry out this process is referred to as software engineers and they are responsible for responsible for writing programming code.
We can conclude that software engineers are strong problem-solvers.
Learn more about software engineer at:https://brainly.com/question/25757629
Read the excerpt from The Code Book. Other attacks include the use of viruses and Trojan horses. Eve might design a virus that infects PGP software and sits quietly inside Alice's computer. When Alice uses her private key to decrypt a message, the virus would wake up and make a note of it. The next time that Alice connects to the Internet, the virus would surreptitiously send the private key to Eve, thereby allowing her to decipher all subsequent messages sent to Alice. One way to better connect with this excerpt is to
Answer:
Tell about an experience with a computer virus.
Explanation:
Simon Singh's "The Code Book," tells the history of how cryptography came into being and the secret messaging world of encryption. Through the detailed narration and diving into the history of encryption, the author traces the evolution of such a process and reveals how it has had a huge impact on the world's policies.
In the given excerpt, Singh gives an example of how viruses are planted and used to spy/ get access to other people's computers. But while it is possible to get the main point of the example, it would have been better if the writer includes experience with a computer virus so that readers will find it easier to connect with the given example. This will enable them to better understand the working of viruses and their effects.
Thus, the correct answer is the first option.
Answer:
b
Explanation:
in object oriented programming what is a constructor?
a. the attributes that allow a programmer to imagine a new object
b. the behaviors that allow a programmer to design a new object
c. the code that allows a programmer to create a new object
d. the template that allows a programmer to modify a new object
Answer:
The answer is A.
Answer:
A. the attributes that allow a programmer to imagine a new object
Explanation:
Got the answer right on the test!
Carlos is using the software development life cycle to create a new app. He has finished coding and is ready to see the output it produces. Which stage of the software development life cycle is Carlos ready for next? Coding Design Maintenance Testing
Answer:
Testing
Explanation:
From the question, we understand that Carlos just finished the coding of the app.
In software development life cycle, the coding phase is where Carlos is expected to make use of his choice of programming language to design the app;
This stage is an integral part of the implementation process and according to the question, the coding has been completed;
The next phase or stage after the implementation phase is testing.
Hence, Carlos is getting ready to test the app.
Answer:
Testing I took the test I definetly testing <3
Display all the natural numbers from 1 to 100 that are exactly divisible by 3 and 7 using FOR … NEXT. Without using Mod
Answer:
FOR i% = 1 TO 100
IF ((i%\3) = i%/3) AND ((i%\7) = i%/7) THEN
PRINT i%
END IF
NEXT i%
Explanation:
Of course using MOD would be cleaner, but another way to check if a number is integer divisable is to compare the outcome of an integer division to the outcome of a floating-point division. If they are equal, the division is an integer division.
The program outputs:
21
42
63
84
Order the steps a user needs to follow to preview and then print a document
Answer:
Click file tab, click print tab, preview document, print document.
Answer:
Click file tab, click print tab, preview document, print document.
Explanation:
Click file tab, click print tab, preview document, print document.
When you register to take classes, the registrar office pulls up a file full of
information about you, including your contact information, the list of classes you are
currently taking, classes you have completed, and your grades. What type of
productivity software is best suited for creating and storing this kind of information?
Spreadsheet
Word processing
Presentation
Database
Answer:
Database
Explanation:
Database software is intended to develop databases and to maintain, alter, access, and obtain useful data stored within them. It is often used to store, manage, and organize information such as field names, documents, and file structures in a database. it helps users to create their own databases to meet their business specifications and requirements. It provides data flexibility, as the storage process and formats can be modified without changing the entire program inside the database.
Does anyone know how I can fix this? I don’t know what is wrong. When I click retry it restarts my laptop and returns back to this. Please help!
Answer:
Software Program Reinstallation
Use the following steps to reinstall factory installed software programs:
Click Start (), All Programs, Recovery Manager, and then Recovery Manager again.
Figure : Recovery Manager
Recovery Manager main screen
Under I need help immediately, click Software Program Reinstallation.
On the Software Program Reinstallation welcome screen, click Next.
Look in the Factory installed programs list for the software program you want to reinstall.
If your software program is listed, select the title.
If the program you want to reinstall is not listed, select The program is not in the list, and then click Next. Follow the instructions to reinstall the program.
Figure : Select program to reinstall
Software Program Reinstallation window
Click Next.
If you are not prompted to uninstall the program before reinstalling it, continue to the next step.
If you are prompted to uninstall the program before reinstalling it, follow these steps.
Click Start (), and then Control Panel.
Under Programs, Uninstall a program.
The Uninstall or change a program window opens.
Figure : Uninstall or change a program
Uninstall or change a program screen
Select the program you want to remove.
Click Uninstall or Uninstall/Change at the top of the program list.
Read and respond to any messages that appear while the software is being removed from your computer.
Once the program is uninstalled, resume the reinstallation from the Recovery Manager program.
When the reinstallation is complete, select Yes, and then Finish to restart the computer.
Which list method allows elements in a sequence to be removed and added at either end of the structure?
index
queue
stack
deque
Answer:
c.) stack
Explanation:
Answer:
the answer is c stack not only dose stack make the most since but i also got it right on edge 2020
Explanation:
Your computer science teacher asks you to sample a black and white image that is 4" x 6". How would you sample the image to provide a good digital approximation using the pixelation widget? What sample size would you use? How would your decision affect the digital representation?
Answer:
The largest dimensions we can make of an image with the pixelation widget is 255*255.
When an image is resized, the number of pixels in the image may be reduced or increased, which causes the image to be resampled. Resampling changes the file size.
Explanation: This is all I could find. I hope its helps Sorry.
The sample size that would provide a good digital approx. will be 255 x 255
When resizing images using the pixelation widget, the pixels of the image will either reduce or increase and the reduction/increase in the pixels will have an effect ( blurry effect ) on the image when viewed by the user. also
when an image is resized the size of original size is either larger or smaller than the resampled image.
Hence to provide a good digital approx. using the pixelation widget from an image 4" x 6" is by using a sample size of 255 x 255
Note : A picture showing the effect of pixelation is attached below
learn more : https://brainly.com/question/19038576
What type of camera is a cell phone camera? A.) DSLR B.) manual C.) compact D.) zoom
Answer:
The correct option is;
D.) Zoom
Explanation:
The six types of camera found on smart phones includes the monochrome, macro camera, ultra-wide camera, periscope zoom camera, the main phone camera, and the depth sensor camera
The zoom cameras on smart phones can be found mainly in the top range models of smart phones due to the costs of the camera components including the sensor.
Smart phones also have digital zooming that make use of the high mega pixels that come with the phone.
what is the location in the base interface of the link to
create a table using wizard?
pls Answer me.
I'll make as BRIANLIST.
Answer:
Hey mate, here is your answer. Hope it helps you.
Explanation:
Before you can create objects such as tables and forms, you must first create the database file in which they will be stored.
1. On the File tab select New.
2. Click on Blank database.
3. In the File Name box, type a name for your database.
4. Click on the browse button to the right of the File name box to browse for a location for your
database.
5. Click on Create.
A new database will be created with a new default Table.
6. Click on Design View to start working with this Table.
You can use forms to control access to data, such as which fields of data are. Then open the table or query upon which you want to base the form. 2. To create a form on which all fields from the underlying table or query are placed. Then to be more selective about which fields appear on your form, you can use the Form Wizard.
Give two examples of a large databases that might be used to help members of the public
Answer:
Examples of large database that might be used to help members of the public are;
1) Apple Healthkit, Carekit and Researchkit
2) IBM Deep Thunder
Explanation:
1) The use of medical aid wearable devices that give instant data feed into the the a patients electronically stored health record has become possible and include the listed Apple technologies that enable the iPhone get instant access and feed back on individual health records
2) Large databases are used for weather forecasting by the processing of big data with the aid of very powerful computers by IBM Deep Thunder, which can also forecast natural disasters and the likelihood of wreckage in utility lines.
An IT firm came across a startup company that offers a new system of computer storage. It is currently in the experimental phase. Which aspect of the technology will the firm consider before adopting it?
a
internal storage
b
graphics
c
physical features
d
commercial potential
Answer:
d . commercial potential
Explanation:
The commercial potential of the technology would be a very important detail to look at before purchasing the new system of computer storage from the startup company.
This is important because the IT firm would be eager to know how the market would accept the product when it is launched. If the public does not like the product, then the firm would suffer a loss, this is why it is paramount.
Assume that the Measurable interface is defined with a static sum method that computes the sum of the Measurable objects passed in as an array, and that BankAccount implements the Measurableinterface. Also assume that there is a variable branchAccounts that is an object reference to a populated array of BankAccount objects for a bank branch. Which of the following represents a correct invocation of the sum method to find the total balance of all accounts at the branch?
A) Arrays.sum(branchAccounts)
B) Measurable.sum(branchAccounts)
C) BankAccount.sum(branchAccounts)
D) branchAccounts.sum()
Answer:
B) Measurable.sum (branchAccounts)
Explanation:
The user interface which can be built by adding components to a panel. The sum method that will be used to find total balance of all accounts at branch is measurable.sum, this will layout the sum of specified branch account total. The measurable interface implements public class bank account as measurable sum.
How are the waterfall and agile methods of software development similar?
Both methods allow project teams to complete small portions of the entire project in small sprints and work on different steps simultaneously.
Both methods focus on development rather than planning, in order for project teams to work more quickly.
Both methods have project teams work on one step at a time and move on when the previous step is completed and approved.
Both methods require documentation so project teams stay on track and keep control over what version of the project they are working on.
Answer:
In the question "first and last", that is "option 1 and 4" is correct.
Explanation:
In the given question the numbering of the choices is missing. if we numbering the choices, then the first choice is on the 1 number, the second choice is in 2 and so on, in which the correct and the wrong choice can be defined as follows:
In point 1, Both method, it divides the project into small parts, at it the working is easy, that's why it is correct. In point 4, Both method, it requires the documentation, that's why it tracks the project. In point 2 and 3, both were wrong because it focuses on both development and planning, and in Waterfall when one part is complete then it will go on the next part, but in the Agile, it does not use this technique.What features in Excel are the same as in Word?
What features are differ?
Answer:
Following are the difference and similarity between word and Excel:
Explanation:
The similarity in word and excel:
The MS-word and MS-Excel both are the part of Microsoft, that is used for the word processing and the Spreadsheet (tablet program). In the word processing is used to create papers like essays while the spreadsheet is used for manipulating the mathematical formula, in another way we can say that both are used for type letters. In both spreadsheet and the word processing is used for insert images, graphs, and hyperlinks, it also uses the tools for formatting bars and the toolbars.The difference in word and excel:
In a word, it includes an application for text processing, and excel would be used for the tablet program. The word is used to create documents like assignments file data files, while excel is being used for the manipulation of numbers by mathematical equations.write a python program to calculate the compound interest
Answer:
initialPrincipal = float(input("Please enter your initial principal:"))
interestRate = float(input("Please enter your interest rate:"))
timePeriod = float(input("Please enter your number of times interest applied per time period:"))
elapsedPeriod = float(input("Please enter your number of time period elapsed:"))
finalAmount = initialPrincipal*(1 + interestRate/timePeriod)^(timePeriod*elapsedPeriod)
print("Your final amount would be:", finalAmount)
What steps are needed for word to create an index
Answer:
Do this:
Position the insertion pointer where you want the index to appear. If you want the index to start on a new page, create a new page in Word. ...
Click the References tab.
In the Index group, click the Insert Index button. The Index dialog box appears. ...
Click the OK button to insert the index into your document.
Answer:
Position the insertion pointer where you want the index to appear.
(the insertion point is the point where the next characters typed from the keyboard will appear)
If you want the index to start on a new page, create a new page in the program you're using
Then you click the References tab.
In the Index group, click the Insert Index button.
When the Index dialog box appears, click the OK button to insert the index into your document.
ternary operators of computer
please explain.
Answer:
It's a compact way of doing an if-else statement.
General Format is
<condition> ? <if condition is true> : <else>;
Example:
I could rewrite:
if(a==1) temp = 1;
else temp = 999;
as
temp = (a==1) ? 1 : 999;
Which of the following is considered information? a. A single keystroke b. All the characters on a keyboard c. An individual test score d. Average of a series of test scores
Answer:
The correct option is;
d. Average of a series of test scores
Explanation:
Information is defined as the knowledge or news which has been sent by one person and received by another such as the reply for a request for the current weather at a specific geographical location
Information is data that has been interpreted, processed, organised, put into a structured and presented within a given context that can be intelligible, meaningful and useful to people.
You have just purchased a motherboard that has an LGA 1156 socket for an Intel Pentium processor. What type of memory modules will you most likely need for this motherboard? A. DIP B. SIMM C. DIMM D. SODIMM
Answer:
The answer is "Option C"
Explanation:
The term DIMM stands for the Dual In-Line Memory Module, which is a kind of memory, that is used in computers. It is a small board of flash memory that uses the 64-bit memory bus because the SIMM has only a 32-bit path. It enables DIMMs to simultaneously transfer more information, and the wrong choices can be defined as follows:
In choice A, It is used in sockets, that's why it is wrong. In choice B, It is wrong because it is used in 32 bits only. In choice D, It is wrong because it is used in the expansion of memory.________is a nickname for social media tools which allows users to contribute content easily and to easily connect to each other. Instant Messaging Web 2.0 Cognitive surplus QR codes
Answer:
Web 2.0
Explanation:
The term that is being defined here is known as Web 2.0. As mentioned in the question this term refers to any and all social platform websites that emphasize user-generated content, ease of use, participatory culture, and interoperability for end users. Some examples of Web 2.0 features would be social media sites like FB, blogs, wikis, video sharing sites, image sharing sites, etc.
Which are characteristics of pseudocode? Select all that apply.
O helps in working out inputs and outputs of the solution
used in modeling the solution
presents algorithms informally, such as in English
presented in the programming language
Answer:
A,B,C
Explanation:
