Answers
Answer:
51.842/2.1 g/mL
Explanation:
the volume of the irregular object= 19.8 - 17.1 =2.7 mL
the density if the irregular object= mass ÷ volume = 51.842 ÷ 2.1 = 51.842/2.1 g/mL
Related Questions
Which is a common unbalanced force acting on objects in motion?
a. friction
b. speed
c. inertia
d. acceleration
Answers
Answer:
a. friction
Explanation:
What is a common unbalanced force acting in motion? Common forces that are often unbalanced include the force of gravity and applied forces. When these forces are unbalanced, objects accelerate, change their position and find new configurations for which all forces are again balanced.
Friction is a kind of force.
How many metals, nonmetals and metalloids are there in the periodic table?
Answers
Answer:
There are 118 elements in the nature.
Metals s = 92
Non metals = 20
Metalloids Ms = 6
Explanation:
Determine the enthalpy for this reaction: Ca(OH)2(s) CO2(g)→CaCO3(s) H2O(l).
Answers
Answer: This is an acid-base reaction (neutralization): Ca(OH) 2 is a base, CO 2 is an acid. ; White, odorless powder. [Note: Readily absorbs CO2 from the air to form calcium carbonate.]
Explanation:
Answer:
-113.2 kJ/mol
Explanation:
(-1207-285.8)-(-981.1-393.5)= -133.2
(Products)-(Reactants)= Answer
Which of the tests would involve a chemical change in the mineral?
Answers
hmmm water
Explanation:
Water can change if you put food coloring
in it
students are comparing the parts of a cell to the parts of a city. Which of the following would provide the best comparison to the nucleus of a cell?
Answers
Answer:
City Hall - directs necessary activities throughout the city
Explanation:
Answer:
Town Hall,
Explanation:
How to round the number 314.77 to 2 significant figures
Answers
Answer:
发你如果热客人看看如果
Explanation:
Answer:
result = 310
significant figures = 2
Explanation:
How to round significant figures:
look the first non-zero digit if rounding to one significant figure, look the digit after the first non-zero digit if rounding to two significant figures. draw a vertical line after the place value digit that is required.look at the next digit.
result = 310
significant figures = 2
Which of the following examples involves an exothermic change.
a. ice melting on a warm day
b. water boiling in a tea kettle
c. gaseous water particles coming together to form fog
d. air in a bicycle tire gaining pressure after a long ride
Answers
Which of the following examples involves an exothermic change.
Answer : C
Explanation : Gaseous water particles coming together to form fog
Hope this helps you!
Gaseous water particles coming together to form fog is an exothermic change due to release of thermal energy.
What is exothermic change?
An exothermic reaction is defined as a reaction that releases heat energy to the surrounding environment. It include any combustion process, rusting of iron, and freezing of water.
In conclusion, we can say that Gaseous water particles coming together to form fog is an exothermic change due to release of thermal energy.
Learn more about exothermic here: https://brainly.com/question/2924714
Please use the image to answer the question thanks : >
Bye, Have a good day.
Answers
what image? you didn't attach one.
How is fission different from a simple chemical reaction? (1 point)
Protons cause fission reactions, while chemical reactions involve electrons.
Fission can happen with radioactive forms of atoms.
Fission reactions run out of control, while chemical reactions are controlled.
Atoms are split into smaller pieces during fission.
Answers
Answer:
C
Explanation:
Fission reactions run out of control, while chemical reactions are controlled. :)
"Chemical reactions are depends on electrons while fission depends on protons. In fission , there is no any effect of temperature while in case of chemical reaction rate of reaction will be affected."
What is chemical reaction?
The type of reaction in which more than one molecule get combined and form a different kind of product then such type of reaction can be considered as chemical reaction.
What is Fission reaction?
Fission is the breaking of a heavy nucleus into lighter nuclei, while fusion is the joining of nuclei to create a larger and heavier nucleus.
To know more about chemical reaction
https://brainly.com/question/3461108
#SPJ2
The primary way in which the amount of carbon dioxide in the atmosphere can be increased is by ____.
Answers
the burning of fossil fuels
I need help with this
Answers
2. 115
THIS IS TO REACH 20 CHARACTERS
2. 115
I hope this helps:)
Based on their definitions, electron affinity could be considered the opposite of
Answers
Based on their definitions, electron affinity could be considered the opposite of electron affinity. This is the force required to remove an electron from an atom while it is gaseous, or the propensity of an atom to lose electrons.
What is meant by electron?The electron is a subatomic particle with a negative one elementary charge electric charge. Due to their lack of components or substructure, electrons, which are part of the lepton particle family's first generation, are typically regarded to be elementary particles.
An electron is a negatively charged subatomic particle that can exist either free or bound to an atom (not bound). Along with protons and neutrons, electrons are one of the three primary types of particles that make up an atom. Together, protons, neutrons, and electrons make up the atom's nucleus.
This is the force required to remove an electron from an atom while it is gaseous, or the propensity of an atom to lose electrons. Conceptually, this is the polar opposite of electron affinity.
To learn more about electron refer to:
https://brainly.com/question/860094
#SPJ2
The answer would be ionization energy
A 12.0 L helium balloon is inflated in an air-conditioned store at 21.0C. Assuming that the pressure remains constant, how large is the balloon when it is taken outside on a hot day at 40.0C?
Answers
The ballon will be 22.86L large when it is taken outside on a hot day at 40⁰C
According to pressure law, the volume of a given mass of gas is directly proportional to the temperature. This is expressed as:
V = kT
k = V1/T1 = V2/T2
Given the following parameters
V1 = 12.0L
T1 = 21⁰C
T2 = 40.0⁰C
Required
Final volume
Substitute the given parameters into the formula
12/21 = V₂/40
21V₂ = 12 * 40
21V₂ = 480
V₂ = 480/21
V₂ = 22.86L
Hence the ballon will be 22.86L large when it is taken outside on a hot day at 40⁰C.
Learn more here: https://brainly.com/question/14788769
is it possible for a molecule to have polar bonds and not have a net dipole?
Answers
NaF NF3 SiF4 CaF2 NH4F
Identify and explain which of the listed compounds from the list are ionic and which are covalent.
no outside links please
Answers
-NaF = ionic (Na is a metal, F is a non-metal)
-NF3 = Covalent (N is a non-metal, F is a non-metal)
-SiF4 = Ionic (Si is a metalloid, F is non-metal)
-CaF2 = ionic (Ca is a metal, F is a non-metal)
-NH4F = covalent (N is a non-metal, H is a non-metal, F is a non-metal)
Hope this helps
THIS IS DUE LIKE REALLY SOON I RLLY NEED HELP :,)
Answers
please help!!!
Select the correct answer.
According to the valence bond theory, what kind of bond forms when valence atomic orbitals overlap with an unpaired electron?
A. covalent bond
B. sigma bond
C. pl bond
D. no bond
Answers
Answer:
A. covalent bond
Explanation:
Hope this helps out!
A chemist who frequently carries out a complex experiment is
likely to have high:
a. Precision, but low accuracy
b. Precision
c.Accuracy, but low precision
d.Accuracy
Answers
Answer:
c.
Explanation:
This is because the chemist will get the average of the experiment from multiple attempts but not precision because the experiment is complex rather than simple.
The chemist will most likely have high accuracy, but low precision. A
chemist who has been performing experiments frequently will be accurate
when taking the required measurements for the experiment due to the
frequency.
Precision however won't be affected because precision deals with how
close his results from the experiment are. The complexity of the
experiment and the different variables used makes him likely to have low
precision.
Read more on https://brainly.com/question/24396527
Kinda confused on this. i need some help.
Answers
To start, check to make sure it isn’t already balanced. If coefficients aren’t present, it’s assumed to be one. In this case, there’s just one aluminum on both sides, but the right hand side has one more fluorine than the left. This means that we’ll have to change the coefficients to make them match. Since we can’t multiply the two fluorines to make three with a whole number, we have to change this one and the one in front of the aluminum fluoride. Let’s put a 3 in front of F2 and a 2 in front of AlF3. So far, we have:
Al + 3F2 -> 2AlF3
Check the number of fluorines; sure enough, we have six on both sides. However, we’ve imbalanced the aluminums by balancing the fluorines. The fix is easy, though; change the coefficient from one to two in front of the aluminum to make them match. The result is therefore:
2Al + 3F2 -> 2AlF3
Check your element totals again; sure enough, they’re all balanced. This is the balanced chemical equation.
Hope this helps!
Which of the following is equal to avogadros number?
A. The number of atoms of bromine in 1 mol Br2
B. The number of molecules of chlorine in 0.50 mol Cl2
C. The number of molecules of nitrogen in 1 mol N2
D. The number of atoms in 1 mol CO
Answers
Answer:
A. The number of atoms of bromine in 1 mol Br2
Explanation:
Hello?
In Avogadro's constant/ number, we talk about atoms in 1 mol and not molecules.
In Avogadro's constant/ number, we talk about atoms in 1 mol and not molecules. The solution will have also been C. But it is talking about molecules. Please bear in mind that molecules is based on grams that it an element contains overall.
I hope this helps. Have a nice studies.
Perform the following mathematical operation, and report the answer to the correct number of significant figures.
0.34 x 0.568 = [ ? ]
Answers
Answer:
0.19312
0.19312 0.19312
What does it mean for a unit to be "derived"?
Answers
Answer:
you differentiate to find the derivative
Explanation:
Answer:
A derived unit is a unit that results from a mathematical combination of SI base units.
OR
A unit of measurement obtained by multiplication or division of the base units of a system without the introduction of numerical factors.
Explanation:
i dont know if that answered your question
I can’t find the answer, can you help me please?
Answers
Answer: Warm ocean air then rises into the storm, then forming an area of low pressure underneath. :)
Explanation:
What compound is this?
Answers
Answer:
Carbon Tetrachloride
Explanation:
1 Carbon atom, 4 chlorine atoms (hence "tetra" prefix)
Suppose you discovered a Group 2 element that has an atomic number larger than radium (Ra). What do you expect the melting and boiling points to be? Explain.
Answers
Answer: The melting point would be lower and the boiling point would be higher
Explanation: From Beryllium to Barium the melting point and the boiling point were constantly decreasing. after that, Radium's boiling point starts to increase in temperature. So I would assume that if there was an element in group 2 with a higher atomic number than Radium it's melting point would continue decreasing while the boiling point increased.
When, we discovered a Group 2 element having an atomic number larger than radium (Ra). Then, we expect that the melting and boiling points of Group 2 elements generally decrease as you move down the group. This is because the outermost electrons are farther from the nucleus due to the increased number of electron shells.
Group 2 elements are alkaline earth metals, and they exhibit certain trends in their physical properties as you move down the group in the periodic table. Radium (Ra) is the last naturally occurring element in Group 2. If we discover a hypothetical Group 2 element with an atomic number larger than radium, it would likely be an artificially synthesized element, and its properties would be subject to speculation.
As we move down Group 2, the atomic number increases, and the elements have more electron shells. This leads to several trends:
Melting and Boiling Points:
The melting and boiling points of Group 2 elements generally decrease as you move down the group. This is because the outermost electrons are farther from the nucleus due to the increased number of electron shells. As a result, the metallic bonds that hold the atoms together weaken, making it easier to break the lattice structure and transition from solid to liquid or gas.
If the hypothetical Group 2 element has an atomic number larger than radium, it would likely have more electron shells and thus a lower melting and boiling point compared to radium. This trend follows the pattern observed in other Group 2 elements.
Density:
Group 2 elements also tend to become less dense as you move down the group. This is because the increase in electron shells leads to larger atomic sizes, and the increased atomic volume decreases the packing efficiency in the solid state.
A Group 2 element with an atomic number larger than radium would likely have a lower density than radium, following the trend observed in the rest of the group.
Reactivity:
Group 2 elements become more reactive as you move down the group. This is because the outermost electrons are farther from the nucleus and are more easily lost, leading to more vigorous chemical reactions, especially with water and oxygen.
The hypothetical Group 2 element might exhibit increased reactivity compared to radium and other elements in the group.
To know more about radium here
https://brainly.com/question/33709400
#SPJ3
What’s boiling/melting point
Answers
Answer:
Melting point is the temperature at which solid and liquid phases of a substance are in equilibrium.
Boiling point is the temperature at which its vapour pressure is equal to the external pressure.
Answer:
melting point is the temperature at which a solid changes into a liquid.
boiling point, temperature at which the pressure exerted by the surroundings upon a liquid is equaled by the pressure
Explanation:
Why is it important to possess fundamental research skills in pursuing your study?
Answers
Answer:
Research Skills enable people to identify a problem, collect informational resources that can help address the problem, evaluate these resources for quality and relevance and come up with an effective solution to the problem.
Explanation:
It is important because it might increase you critical thinking skills and it's much more easy for you to collect data. It also helps you analyze information from different sources off the internet.
When do forces occur?
Answers
Answer:
When there is an interaction between two objects.
Explanation:
a 50.0 ml beaker contains 680. g mercury what is the density of mercury
Answers
Answer:
5.43 grams
Explanation:
because, Its one of the smallest planets, and is also very close to the Sun.
Pls help me, I’ll give 30 points
