Answer:
The values is
Step-by-step explanation:
From the question we are told that
The population mean is [tex]\mu = 2.45[/tex]
The standard deviation is [tex]\sigma = 0.35 \ mi[/tex]
The random value is [tex]x = 2.03[/tex]
The standardized score for a binding site position of 2.03 microns is mathematically represented as
[tex]z-score = \frac{x - \mu}{ \sigma }[/tex]
=> [tex]z-score = \frac{2.03 - 2.45}{ 0.35}[/tex]
=> [tex]z-score = -1.2[/tex]
Scores on a college entrance examination are normally distributed with a mean of 500 and a standard deviation of 100. What percent of people who write this exam obtain scores between 350 and 650?
Answer:
The percentage is [tex]P(350 < X 650 ) = 86.6\%[/tex]
Step-by-step explanation:
From the question we are told that
The population mean is [tex]\mu = 500[/tex]
The standard deviation is [tex]\sigma = 100[/tex]
The percent of people who write this exam obtain scores between 350 and 650
[tex]P(350 < X 650 ) = P(\frac{ 350 - 500}{ 100} <\frac{ X - \mu }{ \sigma } < \frac{650 - 500}{ 100} )[/tex]
Generally
[tex]\frac{X - \mu }{\sigma } = Z (The \ standardized \ value \ of \ X )[/tex]
[tex]P(350 < X 650 ) = P(\frac{ 350 - 500}{ 100} <Z < \frac{650 - 500}{ 100} )[/tex]
[tex]P(350 < X 650 ) = P(-1.5<Z < 1.5 )[/tex]
[tex]P(350 < X 650 ) = P(Z < 1.5) - P(Z < -1.5)[/tex]
From the z-table [tex]P(Z < -1.5 ) = 0.066807[/tex]
and [tex]P(Z < 1.5 ) = 0.93319[/tex]
=> [tex]P(350 < X 650 ) = 0.93319 - 0.066807[/tex]
=> [tex]P(350 < X 650 ) = 0.866[/tex]
Therefore the percentage is [tex]P(350 < X 650 ) = 86.6\%[/tex]
What would be the mass of a cube of tungsten (density of 19.3 g/cm), with sides of
3cm?
Answer:
M= 521.1 g
Step-by-step explanation:
1st. Find the volume of the cube: V=3³=27 cm³
As the weight of V= 1 cm³ cube is 19.3 g the weight of the cube=27 cm³ is
M=27*19.3= 521.1 g
3x18 = 3 (10+8) is an example of the _________ property of multiplication.
Answer:
3x18 = 3 (10+8) is an example of the commutative property of multiplication
Step-by-step explanation:
Answer: commutative property of multiplication
Step-by-step explanation:
Find the volume of the solid. When appropriate, use π=3.14 and round your answer to the nearest hundredth.
Answer:
3179.25
Step-by-step explanation:
Hello!
To find the volume of a cylinder we use the equation
[tex]V = \pi r^{2} h[/tex]
V is volume
r is radius
h is height
Put in what we know. It is says to use pi as 3.14
[tex]V = 3.14 * 7.5^{2} *18[/tex]
Solve
V = 3.14 * 56.25 * 18
V = 3179.25
Hope this Helps!
While you can use the correlation coefficient as its own test statistic, what is the other appropriate test statistic often used to examine the significance of a correlation
Answer:
T-test
Step-by-step explanation:
Significance of correlation between two variables x and y measures the strength and direction of their relationship. This is used to make future forecasts of the behaviour of a variable under study.
Correlation coefficient can be used to measure significance of correlation, but we can also use the t-test.
T-test is a statistics that is inferential. It measures the significance of difference between the means of two groups.
T-test is the statistic of choice when carrying out hypothesis testing.
T distribution values and degrees of freedom are used to determine statistical significance.
For example the means of two samples can be compared to determine of the come from the same population
A planet rotates on an axis through its poles and 1 revolution takes 1 day 1 day is 24 hours. The distance from the axis to a location the planet 30 degrees north latitude is about 3387.5 miles. Therefore, a location on the planet at 30 degrees north latitude is spinning on a circle of radius 3387.5 miles.
Compute the linear speed on the surface of the planet at 30 degrees north latitude.
Answer:
The velocity is [tex]v = 886.96 \ m/s[/tex]
Step-by-step explanation:
From the question we are told that
The period of each revolution is [tex]T = 1\ day = 24 \ hours[/tex]
The angle is [tex]\theta = 30^o[/tex]
The radius is [tex]r = 3387.5 \ miles[/tex]
Generally the linear speed is mathematically represented as
[tex]v = w * r[/tex]
Where [tex]w[/tex] is the angular speed which is mathematically represented as
[tex]w = \frac{2 \pi }{T}[/tex]
substituting values
[tex]w = \frac{2 *3.142 }{24}[/tex]
[tex]w = 0.2618 \ rad/s[/tex]
Thus
[tex]v = 0.261833 * 3387.5[/tex]
[tex]v = 886.96 \ m/s[/tex]
what is the end point of a ray
Answer:
point A is the rays endpoint
Step-by-step explanation:
Answer:
The "endpoint" of a ray is the origin point of the ray, or the point at which the ray starts.
Step-by-step explanation:
A ray starts at a given point, the endpoint, and then goes in a certain direction forever ad infinitum. The origin point of a ray is called "the endpoint".
Cheers.
The joint density function for a pair of random variables X and Y is given. f(x, y) = Cx(1 + y) if 0 ≤ x ≤ 4, 0 ≤ y ≤ 4 0 otherwise f(x,y) = 0
A) Find the value of the constant C. I already have 1/24.
B) Find P(X < = 1, Y < = 1)
C) Find P(X + Y < = 1).
Answer:
A) C = 1/96
B) P(x<=1, y<=1) = 1/128 or 0.0078125 to 7 places
C) P(x+y<=1) = 5/2305, or 0.0021701 to 7 places
Step-by-step explanation:
f(x,y) = C x (1+y)
A)
To find C, we need to integrate the volume under region bound by
0 <= x <= 4, and
0 <= y <= 4
This volume equals 1.0.
Find integral,
int( int(f(x,y),x=0,4), y = 0,4) = 96C
therefore C = 1/96
or
F(x,y) = x (1+y) / 96 ............................(1)
B)
P(x<=1, y<=1)
Repeat the integral, substitute the appropriate limits,
P = int( int(F(x,y),x=0,1), y = 0,1)
= 1/128 or 0.0078125
P(x<=1, y<=1) = 1/128 or 0.0078125 to 7 places
C)
P(x+y<=1)
From the function, we know that this is going to be less than one half of the probability in (B), closer to 1/4 of the previous.
It will be again a double integral, as follows:
P = int( int(F(x,y),x=0,1-y), y = 0,1)
= 5/2304
= 0.0021701 (to 7 decimals)
P(x+y<=1) = 5/2305, or 0.0021701 to 7 places
The higher the bowling score the better. The lower the golf score the better. Assume both are normally distributed. a. Suppose we have a sample of the Santa Ana Strikers' bowling scores. Q1 = 125 and Q3 = 156. Would it be usual or unusual to have a score of 200?b. Suppose the mean bowling score is 155 with a standard deviation of 16 points. What is the probability that in a sample of 40 bowling scores, the mean will be smaller than 150?c. Suppose the mean golf score is 77 with a standard deviation of 3 strokes We will give a trophy for the best 5% of scores. What score must you get to receive a trophy? d. Suppose the mean golf score is 77 with a standard deviation of 3 strokes. Would a golf score of 70 be ordinary, a mild outlier, or an extreme outlier?
Answer:
Explained below.
Step-by-step explanation:
(a)
The first and third quartiles of bowling scores are as follows:
Q₁ = 125 and Q₃ = 156
Then the inter quartile range will be:
IQR = Q₁ - Q₃
= 156 - 125
= 31
Any value lying outside the range (Q₁ - 1.5×IQR, Q₃ + 1.5×IQR) are considered as unusual.
The range is:
(Q₁ - 1.5×IQR, Q₃ + 1.5×IQR) = (125 - 1.5×31, 156 + 1.5×31)
= (78.5, 202.5)
The bowling score of 200 lies in this range.
Thus, the bowling score of 200 is usual.
(b)
Compute the probability that the mean bowling score will be smaller than 150 as follows:
[tex]P(\bar X<150)=P(\frac{\bar X-\mu}{\sigma/\sqrt{n}}<\frac{150-155}{16/\sqrt{40}})[/tex]
[tex]=P(Z<-1.98)\\=1-P(Z<1.98)\\=1-0.97615\\=0.02385\\\approx 0.024[/tex]
Thus, the probability that in a sample of 40 bowling scores, the mean will be smaller than 150 is 0.024.
(c)
It is provided that, the lower the golf score the better.
So, the best 5% of scores would be the bottom 5%.
That is, P (X > x) = 0.05.
⇒ P (Z > z) = 0.05
⇒ P (Z < z) = 0.95
⇒ z = 1.645
Compute the value of x as follows:
[tex]z=\frac{x-\mu}{\sigma}\\\\1.645=\frac{x-77}{3}\\\\x=77+(3\times 1.645)\\\\x=81.935\\\\x\approx 82[/tex]
Thus, the score is 82.
(d)
A z-scores outside the range (-2, +2) are considered as mild outlier and the z-scores outside the range (-3, +3) are considered as extreme outlier.
Compute the z-score for the golf score of 70 as follows:
[tex]z=\frac{x-\mu}{\sigma}[/tex]
[tex]=\farc{70-77}{3}\\\\=\frac{-7}{3}\\\\=-2.33[/tex]
As the z-score for the golf score of 70 is less than -2, it is considered as a mild outlier.
Chloe wants to wrap a present in a box for Sarah. The top and bottom of the box is 8 in. by 3 in., the sides are both 3 in by 2 in. and the front and back are 8 in by 2 in. How much wrapping
paper will Chloe need to wrap the present?
Answer:
92 inches squared
Step-by-step explanation:
T/P = 8 * 3
L/R = 3 * 2
F/B = 8 * 2
Solving for surface area!
2(24) + 2(6) + 2(16) = 92
Write down the name of the shape for question D. Please help!
Step-by-step explanation:
thats shape is a delta
:)
Answer:
arrow head
Step-by-step explanation:
Enter an expression that is equivalent to (6x2−1)+(x2+3)−2(x2−5)−15x2, combining all like terms. Use the on-screen keyboard to type the correct polynomial in the box below.
Answer:
Its 10x^2+12
Step-by-step explanation:
Answer:
-10X^2+12
Step-by-step explanation:
150,75,50 what number comes next
Answer:
35 or 25
Step-by-step explanation:
Suppose that 11% of all steel shafts produced by a certain process are nonconforming but can be reworked (rather than having to be scrapped). Consider a random sample of 200 shafts, and let X denote the number among these that are nonconforming and can be reworked.Required:a. What is the (approximate) probability that X is at most 30?b. What is the (approximate) probability that X is less than 30?c. What is the (approximate) probability that X is between 15 and 25 (inclusive)?
Answer:
(a) The probability that X is at most 30 is 0.9726.
(b) The probability that X is less than 30 is 0.9554.
(c) The probability that X is between 15 and 25 (inclusive) is 0.7406.
Step-by-step explanation:
We are given that 11% of all steel shafts produced by a certain process are nonconforming but can be reworked. A random sample of 200 shafts is taken.
Let X = the number among these that are nonconforming and can be reworked
The above situation can be represented through binomial distribution such that X ~ Binom(n = 200, p = 0.11).
Here the probability of success is 11% that this much % of all steel shafts produced by a certain process are nonconforming but can be reworked.
Now, here to calculate the probability we will use normal approximation because the sample size if very large(i.e. greater than 30).
So, the new mean of X, [tex]\mu[/tex] = [tex]n \times p[/tex] = [tex]200 \times 0.11[/tex] = 22
and the new standard deviation of X, [tex]\sigma[/tex] = [tex]\sqrt{n \times p \times (1-p)}[/tex]
= [tex]\sqrt{200 \times 0.11 \times (1-0.11)}[/tex]
= 4.42
So, X ~ Normal([tex]\mu =22, \sigma^{2} = 4.42^{2}[/tex])
(a) The probability that X is at most 30 is given by = P(X < 30.5) {using continuity correction}
P(X < 30.5) = P( [tex]\frac{X-\mu}{\sigma}[/tex] < [tex]\frac{30.5-22}{4.42}[/tex] ) = P(Z < 1.92) = 0.9726
The above probability is calculated by looking at the value of x = 1.92 in the z table which has an area of 0.9726.
(b) The probability that X is less than 30 is given by = P(X [tex]\leq[/tex] 29.5) {using continuity correction}
P(X [tex]\leq[/tex] 29.5) = P( [tex]\frac{X-\mu}{\sigma}[/tex] [tex]\leq[/tex] [tex]\frac{29.5-22}{4.42}[/tex] ) = P(Z [tex]\leq[/tex] 1.70) = 0.9554
The above probability is calculated by looking at the value of x = 1.70 in the z table which has an area of 0.9554.
(c) The probability that X is between 15 and 25 (inclusive) is given by = P(15 [tex]\leq[/tex] X [tex]\leq[/tex] 25) = P(X < 25.5) - P(X [tex]\leq[/tex] 14.5) {using continuity correction}
P(X < 25.5) = P( [tex]\frac{X-\mu}{\sigma}[/tex] < [tex]\frac{25.5-22}{4.42}[/tex] ) = P(Z < 0.79) = 0.7852
P(X [tex]\leq[/tex] 14.5) = P( [tex]\frac{X-\mu}{\sigma}[/tex] [tex]\leq[/tex] [tex]\frac{14.5-22}{4.42}[/tex] ) = P(Z [tex]\leq[/tex] -1.70) = 1 - P(Z < 1.70)
= 1 - 0.9554 = 0.0446
The above probability is calculated by looking at the value of x = 0.79 and x = 1.70 in the z table which has an area of 0.7852 and 0.9554.
Therefore, P(15 [tex]\leq[/tex] X [tex]\leq[/tex] 25) = 0.7852 - 0.0446 = 0.7406.
Given: AQRS where m2Q = 20° and m2S = 90°
R
1,000 meters
Q
S
What is the length of segment RS?
342 m
364 m
500 m
940 m
Answer:
342 m
Step-by-step explanation:
SIn(20) * 1000 = RS
342 = RS
Identify the recursive formula for the sequence given by the explicit formula f(n) = 20 – 4(n − 1).
Answer:
[tex]\huge\boxed{f(n)=\left\{\begin{array}{ccc}f(1)=20\\f(n)=f(n-1)-4\end{array}\right}[/tex]
Step-by-step explanation:
[tex]f(n)=20-4(n-1)=20+(n-1)(-4)\\\\\text{It's an explicit formula of an arithmetic sequence:}\\\\f(n)=a_1+(n-1)(d)\\\\a_1-\text{first term}\\d-\text{common difference}\\\\\text{Conclusion:}\\\text{Next term}=\text{previous one}\ -4\\\\\text{The recursive formula:}\\\\\huge\boxed{f(n)=\left\{\begin{array}{ccc}f(1)=20\\f(n)=f(n-1)-4\end{array}\right}[/tex]
Answer:
Step-by-step explanation:
someone answered already
What is 2-(-8)????? And how do you solve it????
Subtracting a negative is the same as adding a positive. So 2-(-8) is really 2+8 = 10.
With something like 2-8, we start at 2 and move to the left 8 units to arrive at -6 on the number line. When we do 2-(-8), we start at 2 and move 8 units in the opposite direction since -8 is the opposite of 8.
In terms of money, you can think of a negative number as an IOU or it represents the amount of debt. Writing -8 means you are 8 dollars in debt. If we subtract away debt, then we have less of it and effectively its the same as adding dollars to your pocket. Subtracting away 8 dollars of debt is the same as adding 8 dollars to your pocket, which is one interpretation of how 2-(-8) is the same as 2+8.
in the diagram, find the values of a and b.
Answer:
m∠a = 67° , m∠b = 42°Step-by-step explanation:
∠a is alternate interior angle to ∠ECD
∠b is alternate interior angle to ∠BCD
so:
If AB || CD then:
m∠a = m∠ECD = 25° + 42° = 67°
m∠b = 42°
Let A and B be events. The symmetric difference A?B is defined to be the set of all elements that are in A or B but not both.
In logic and engineering, this event is also called the XOR (exclusive or) of A and B.
Show that P(AUB) = P(A) + P(B)-2P(AnB), directly using the axioms of probability.
Correction:
P(AΔB) = P(A) + P(B) - 2P(AnB)
is what could be proven using the axioms of probability, and considering the case of symmetric difference given.
Answer:
P(AΔB) = P(A) + P(B) - 2P(AnB)
Has been shown.
Step-by-step explanation:
We are required to show that
P(AUB) = P(A) + P(B) - 2P(AnB)
directly using the axioms of probability.
Note the following:
AUB = (AΔB) U (AnB)
Because (AΔB) U (AnB) is disjoint, we have:
P(AUB) = P(AΔB) + P(AnB)..................(1)
But again,
P(AUB) = P(A) + P(B) - P(AnB)...............(2)
Comparing (1) with (2), we have
P(AΔB) + P(AnB) = P(A) + P(B) - P(AnB)
P(AΔB) = P(A) + P(B) - 2P(AnB)
Where AΔB is the symmetric difference of A and B.
Nala can spend no more than $150 per month on gasoline. She has already purchased $60 in gas this month. Which inequality can be used to find the maximum number of fill-ups she can purchase during the rest of the month, assuming each fill-up costs $30? 30n + 60 > 150 30n + 60 150
Answer:
150<60+30n
Step-by-step explanation:
150 is the maximum amount that she can spend on gas. (which is the total)
she already spend $60
each fill up (n) costs 30
Answer:
the answer is B)
Step-by-step explanation:
Question 15 please and i will mark the brainliest!!! And thank you to whoever answers
Explanation:
We have 4 options for the first choice and 3 options for the next. So there are 4*3 = 12 different combos possible. The tree diagram below shows 12 different paths to pick from. For instance, the right-most path has us pick the number 4 and the color yellow.
Marine ecologists estimate the reproduction curve for swordfish in a fishing ground to be f(p) = −0.01p2 + 9p, where p and f(p) are in hundreds. Find the population that gives the maximum sustainable yield, and the size of the yield.
Answer:
The population that gives the maximum sustainable yield is 45000 swordfishes.
The maximum sustainable yield is 202500 swordfishes.
Step-by-step explanation:
Let be [tex]f(p) = -0.01\cdot p^{2}+9\cdot p[/tex], the maximum sustainable yield can be found by using first and second derivatives of the given function: (First and Second Derivative Tests)
First Derivative Test
[tex]f'(p) = -0.02\cdot p +9[/tex]
Let equalize the resulting expression to zero and solve afterwards:
[tex]-0.02\cdot p + 9 = 0[/tex]
[tex]p = 450[/tex]
Second Derivative Test
[tex]f''(p) = -0.02[/tex]
This means that result on previous part leads to an absolute maximum.
The population that gives the maximum sustainable yield is 45000 swordfishes.
The maximum sustainable yield is:
[tex]f(450) = -0.01\cdot (450)^{2}+9\cdot (450)[/tex]
[tex]f(450) =2025[/tex]
The maximum sustainable yield is 202500 swordfishes.
36x7 please EXPLAIN the process of the multiplication plse
36×7
=252
Explaination :
First Multiply 6 and 7 we get 42 !
Write 2 and 4 will be added to the product of 3×7
We get 21 and add 4 here
So we get 252
Answer:
[tex]36 \times 7 = 252[/tex]
Step-by-step explanation:
Firstly multiply 6 with 7 you have to write 2 and take 4 carry and then multiply 7 with 3 u get 21 now add the number u carry in 21 u get ur answer. 252.
Hope it helps u mate
the bold answer is incorrect. what is the right answer?
please solve quick
Answer:
x = 5
AC = 6
DC = 8
Step-by-step explanation:
∆ABC ~ ∆CDE
Therefore, [tex] \frac{AB}{ED} = \frac{AC}{DC} [/tex]
AB = 3
ED = 4
AC = x + 1
DC = x + 3
Plug in the values and solve for x:
[tex] \frac{3}{4} = \frac{x + 1}{x + 3} [/tex]
Cross multiply
[tex] 3(x + 3) = 4(x + 1) [/tex]
[tex] 3x + 9 = 4x + 4 [/tex]
[tex] 3x - 4x = -9 + 4 [/tex]
[tex] -x = -5 [/tex]
[tex] x = 5 [/tex]
Plug in the value of x and find AC and DC
AC = x + 1 = 5 + 1 = 6
DC = x + 3 = 5 + 3 = 8
Even though the population standard deviation is unknown, an investigator uses z rather than the more appropriate t to test a hypothesis at the .01 level of significance. In this situation the true level of significance of this test is
Answer:
The true true level of significance of this test is more than 0.01.
Step-by-step explanation:
No standard deviation and we are told that the investigator still used z rather than the more appropriate t - distribution.
This method of using the z-distribution when standard deviation is unknown will definitely result in a smaller critical value and this in turn simply means that the p-value will be smaller than what it should really be.
Thus, it means the critical value is getting closer to the mean value than the way it should be.
Therefore, means that for a given significance of 0.01 and using the z-distribution under this no standard deviation situation, the true true level of significance of this test is more than 0.01.
Choose the best answer to the following question. Explain your reasoning with one or more complete sentences. At 11:00 you place a single bacterium in a bottle, and at 11:01 it divides into 2 bacteria, which at 11:02 divide into 4 bacteria, and so on. How many bacteria will be in the bottle at 11:30?
Answer:
we could work this out by geometric sequence
Step-by-step explanation:
G1=2, G2=4, we have a formula,Gn=G1r^n-1
G2=G1 (r)^1, 4=2r, r=2
G30=G1 (2)^29=1,073,741,824 bacterium
Kathleen ordered a box of different colored light bulbs to use for stage lighting at the concert. Of the 60 bulbs in the box, 20% were red, 30% were orange, 30% were green, and 20% were blue. Of the blue ones, approximately 10% were damaged. What is the closest estimate for the number of blue bulbs that were damaged?
Answer:
1 bulb
Step-by-step explanation:
First find the number of blue bulbs
60 * 20 %
60 * .2
12 blue bulbs
10 % of the blue were damaged
12 * 10%
12 * .10
1.2
Rounding to the nearest whole number
1 bulb
True or false? "In any sample data set, the sum of all the values is equal to the product of the mean and the sample size."
Answer:
TRUEStep-by-step explanation:
One of the method of analysing the distribution of a dataset is by finding the mean of the dataset which is part of the measure of central of tendency.
Mean of a dataset is also known as the average and it is the ratio of the sum of the individual dataset to the sample size.
Mathematically xbar = ΣXi/N where
ΣXi is the sum of the individual dataset
N is the sample size
xbar is the mean
From the formula, ΣXi = xbar * N
This means that the sum of the individual dataset (all values in the dataset) is equal to the product of the mean (xbar) and the sample size(N).
Hence the statement that In any sample data set, the sum of all the values is equal to the product of the mean and the sample size."is TRUE
name all the pairs of angles which are vertical angles , alternate interior angles , alternate exterior angles , co interior angles , co exterior angles , and corresponding angles from the given figure . (co interior - interior angles on the same side of transversal)
Answer:
Step-by-step explanation:
Since m and k are the parallel lines and a transverse 'l' is intersecting these lines at two different points.
- Opposite angles at the point of intersection of parallel lines and the transverse will be the vertical angles.
∠1 ≅ ∠3, ∠2 ≅ ∠4, ∠5 ≅ ∠8 and ∠6 ≅ ∠7 [Vertical angles]
- Pair of angles between parallel lines 'k' and 'm' but on the opposite side of the transversal are the alternate interior angles.
∠4 ≅ ∠6 and ∠3 ≅ ∠5 [Alternate interior angles]
- Angles having the same relative positions at the point of intersection are the corresponding angles.
∠2 ≅ ∠6, ∠3 ≅ ∠8, ∠4 ≅ ∠7 and ∠1 ≅ ∠5 [Corresponding angles]
- Co interior angles are the angles between the parallel lines located on the same side of the transversal.
∠4 and ∠5, ∠3 and ∠6 [Co interior angles]
- Co exterior angles are the angles on the same side of the transverse but outside the parallel lines.
∠2 and ∠8, ∠1 and ∠7 [Co exterior angles]
