Answer:
The formula for speed is speed=distance
time
Explanation:
to work out what the units are for speed,you need to know the units for distance and time.In this example,distance is in metres(m) and time is in seconds (s) , so the units for speed is metre per second (m/s).
Describe the following as a (a) distance (b) speed (c) acceleration (d) force
6. Force
7 speed
8 distance
9 acceleration
A car is traveling to the right with a speed of 2.0\,\dfrac{\text m}{\text s}2.0 s m 2, point, 0, start fraction, start text, m, end text, divided by, start text, s, end text, end fraction on an icy road when the brakes are applied. The car slows down with constant acceleration for 3.0\,\text m3.0m3, point, 0, start text, m, end text until it comes to a stop. How long does it take the car to slide to a stop?
Answer:
It took the car 3 second to come to full stop
Explanation:
When the car is driving to the right at a speed of 2 m/s, and suddenly brakes giving the car a constant negative acceleration making it travel 3 meters after it stops, we can use the following kinematic equation to solve for the acceleration applied by the brakes:
[tex]v=v_0-a\,t\\0=2-a\,t\\a=\frac{2}{t}[/tex]
and we use this result in the following kinematic equation for the distance traveled to find the time it took it to stop:
[tex]x-x_0=v_0\,t-\frac{1}{2} a\,\,t^2\\3=2\,t -\frac{1}{2} (\frac{2}{t}) \,\,t^2\\3=2\,t-t\\3=t[/tex]
therefore, it took the car 3 seconds to come to a full stop.
Sound waves move the fastest through which medium?
Answer:
Sound travels fastest through solids.
Explanation:
This is because molecules in a solid medium are much closer together than those in a liquid or gas, allowing sound waves to travel more quickly through it. In fact, sound waves travel over 17 times faster through steel than through air.
Sound waves move the fastest through the solid. The speed of the sound wave in the liquid and gas is low,
What is sound wave?A sound wave is produced when a medium begins to vibrate. When an entity vibrates, a pressure wave is formed, which causes sound.
Solids transmit sound the fastest. Because the molecules in a solid medium are much closer together than in a liquid or gas, sound waves can move through it much faster.
Hence, sound waves move the fastest through the solid.
To learn more about the sound wave, refer to the link;
https://brainly.com/question/11797560
#SPJ2
placement.
A body is thrown vertically upwards. Its velocity keeps on decreasing. What happens
to its kinetic energy when its reaches the maximum height? Why?
If the speed of a body is increased four times, how will its kinetic energy be affected?
Answer:
kinetic energy will be equal to 0
Explanation:
this is because at final position velocity of body will become zero.
kinetic energy eill be 8 times
Two mass m1 and m2 lie on a frictionless surface. Between the two masses is a compressed spring, with spring constant k. The system is held in place. At time t=0 the blocks are released. The blocks move off in opposite directions with velocities v1 and v2. how much was the spring compressed?
Answer:
The spring was compressed the following amount:
[tex]\Delta x=\sqrt{ \frac{m_1\,v_1^2+ m_2\,v_2^2}{k} }[/tex]
Explanation:
Use conservation of energy between initial and final state, considering that the surface id frictionless, and there is no loss in thermal energy due to friction. the total initial energy is the potential energy of the compressed spring (by an amount [tex]\Delta x[/tex]), and the total final energy is the addition of the kinetic energies of both masses:
[tex]E_i=\frac{1}{2} k\,(\Delta x)^2\\\\E_f=\frac{1}{2} m_1\,v_1^2+\frac{1}{2} m_2\,v_2^2[/tex]
[tex]E_i=E_f\\[/tex]
[tex]\frac{1}{2} k\,(\Delta x)^2=\frac{1}{2} m_1\,v_1^2+\frac{1}{2} m_2\,v_2^2\\k\,(\Delta x)^2=m_1\,v_1^2+ m_2\,v_2^2\\(\Delta x)^2=\frac{m_1\,v_1^2+ m_2\,v_2^2}{k} \\\Delta x=\sqrt{ \frac{m_1\,v_1^2+ m_2\,v_2^2}{k} }[/tex]
You are hiking in a canyon and you notice an echo. You decide to let out a yell and notice it took 2 seconds before you heard the echo of your yell. How far away is the canyon wall that reflected your yell
Answer:
d = 343 m
Explanation:
Given that,
You notice that an echo took 2 seconds before you heard the echo of your yell.
We need to find that how far away is the canyon wall that reflected your yell. It means we need to find the distance.
The distance covered by an object is given by :
d = v × t
v is speed of sound in air, v = 343 m/s
The sound took 1 s to reach the wall and 1 s back to you.
It means that,
d = 343 × 1
d = 343 m
So, canyon will reflect your yell at a distance of 343 m
Astronomers can now report that active star formation was going on at a time when the universe was only 20% as old as it is today. When astronomers make such a statement, how can they know what was happening inside galaxies way back then
Answer:
First, as you may know, the light travels at a given velocity.
In vaccum, this velocity is c = 3x10^8 m/s.
And we know that:
distance = velocity*time
Now, if some object (like a star ) is really far away, the light that comes from that star may take years to reach the Earth.
This means that the images that the astronomers see today, actually happened years and years ago (So the night sky is like a picture of the "past" of the universe)
Also, for example, if an astronomer sees some particular thing, he can apply a model (a "simplification" of some phenomena that is used to simplify it an explain it) and with the model, the scientist can infer the information of the given thing some time before it was seen.
The astronomers could know what was happening inside galaxies way back then by the fact that;
they examine the spectra of galaxies (or the overall colors of galaxies) with the highest redshifts they can find
Astronomers Measure the wavelength of the light that is stretched, so the light is seen as 'shifted' towards the red part of the spectrum by using spectroscopy. This measure is also called redshift.
This invokes a ray of light through a triangular prism that splits the light into various components known as spectrum.
The way the astronomers could use this concept to know what was happening in the galaxies before is by examining the spectra of galaxies that have the highest redshifts.
Read more at; https://brainly.com/question/15995216
ball is thrown upward from a window that is 12 m above the ground. The ball reaches a maximum height of 4 m above the window before falling all the way down to the ground. What distance did the ball travel?
Answer:
20 m
Explanation:
The ball travels 4 m up, then 16 m down. It travels a total distance of 20 m.
A 30-cm long string, with one end clamped and the other free to move transversely, is vibrating in its second harmonic. The wavelength of the constituent traveling waves is:
Answer:
[tex]\lambda[/tex] = 40 cm
Explanation:
given data
string length = 30 cm
solution
we take here equation of length that is
L = [tex]n \times \frac{1}{4} \lambda[/tex] ...............1
so
total length will be here
[tex]L = \frac{\lambda}{2} + \frac{\lambda}{4}\\[/tex]
[tex]L = \frac{3 \lambda }{4}[/tex]
so [tex]\lambda[/tex] will be
[tex]\lambda = \frac{4L}{3}\\\lambda = \frac{4\times 30}{3}[/tex]
[tex]\lambda[/tex] = 40 cm
If you told a policeman about a car traveling 44.704 m/s (100 mph) that was traveling in an eastward direction, you would be describing the car's ___.
Answer:
Velocity
Explanation:
You would be describing the velocity of the car.
Velocity in physics is defined as Vector quantity that describes the displacement of an object with respect to the time it takes to attain it. Displacement is the addition of direction to the speed of an object. The displacement is noted in the question, "traveling eastward". While it is stated that the car travels at 44.704 m/s. Ordinarily, it would have been tagged speed, if not for the direction added to it which makes it velocity.
I hope you understand.
A concave mirror has a radius of curvature of 80cm. If the real image of an object is formed at 1m, how far from the mirror is the object?
Answer:
66.7 cm
Explanation:
The focal length is half the radius of curvature, or f = 40 cm.
The image is real, so i = +100 cm.
The distance to the object is therefore:
1/o + 1/f = 1/i
1/o + 1/40 = 1/100
o = -66.7 cm
The object is 66.7 cm left of the mirror.
Match the following:
Tailored software
. Utility software
Operating system
Software
Packaged software
Set of programs
Library management system
Scan viruses
Microsoft Office
used to coordinate the hardw
the computer
Answer:
1) Tailored software Library management system
2) Utility software Scan viruses
3) Operating system Used to coordinate the hardware of the computer
4) Packaged software set of programs Microsoft office
Explanation:
1) A tailored software, also known as a custom software, is one that is designed and tailor-made only for a particular organisation
2) A utility software is a computer maintenance and analysis software used to enable proper functioning of the computer by performing restorative and maintenance tasks
3) Operating system software
The operating system software controls the operation of the computer hardware within the system and enables the operation of other programs in the computer
4) Packaged software are a collection of programs that are oriented to perform interrelated tasks that a focused to a particular area, such as Microsoft Office.
If 60 L of a gas are at 4 atm and 27 C °, what pressure would it have if the volume is 40 L 127 C °?
Answer:
8 atm
Explanation:
Ideal gas law:
PV = nRT
where P is pressure, V is volume, n is moles, R is universal gas constant, and T is absolute temperature.
If n is constant:
PV / T = PV / T
(4 atm) (60 L) / (27 + 273) K = P (40 L) / (127 + 273) K
0.8 atm = 0.1 P
P = 8 atm
The ways to measure the mass and volume of irregular object
Answer:
When we have irregular objects, it may become very hard to calculate the volume of the object, as we actually can not use any simple equation to find it.
The mass is less tricky, just find a scale and wheight it, now we know the mass of the irregular object.
One way to measure the volume of the object is using water... how we do it?
Get some recipient with water, measure the height of the water.
Introduce your object into the water and totally submerge it, now the level of the water will rise. This is because as you introduce the object under the water, you are displacing up a given volume of water that has the same volume as the irregular object.
Now that you know the height of the water before and after you put your object, you can easily calculate the volume of water displaced, and that will be the volume of the object (the tricky part may be totally submerging the object if, for example, is wood and it floats, here you can use a thin wire to push it down but it will affect a little bit the measures.)
What is the equation for burning a fossil fuel
Answer:
Fuel + O2 → CO2 + H2O
Explanation:
what is the frequency and wavelength of a remote control? PLEASE HURRY
Answer:
940 nanometers wavelength, and about an 300 mHz - 400 gHz frequency
What would happen to the
to the output force (F2)if the area
of the piston1 is made larger than that of piston2? plz help
Answer:
The output force would decrease since exerted force is inversely proportional to contact area.
Explanation:
F ∝ [tex]\frac{1}{A}[/tex] , Where 'F' is the exerted force and 'A' is the contact area.
Determine whether each sum, difference, product,
or quotient represents a rational number or an
irrational number. Explain how you know without
simplifying
Explanation:
The asked in the Question is missing, although i am assuming the number
as [tex]\frac{6}{23}[/tex] ÷[tex]\frac{\sqrt{2} }{2}[/tex].
The given expression contains an irrational number. So, the quotient will also be an irrational number.
Solving
[tex]\frac{6}{23}\times\frac{\sqrt{2} }{2} \\=\frac{3\sqrt{2} }{23}[/tex]
Which is an irrational number.
A 30-µF capacitor is charged to an unknown potential V and then connected across an initially uncharged 10-uF capacitor. If the final potential difference across the .10-µF capacitor is 20 V, determine V
Answer:
V = 26.6 volts
Explanation:
Let Initial Potential Difference be V.
Charge (Q) accumulated in 30 mF Capacitor =
Q = C * V
Q= 30 * V
Now, Common Potential after connecting to uncharged 10mF capacitor in parallel = 20 Volt
Total Charge =Total Capacity * Common Potential
30 * V = ( 30 + 10) * 20
V = 26.6 volts
The unknown potential across the 30-µF capacitor is 6.67 V.
The given parameters;
initial capacitance of the capacitor, C = 30 µFunknown potential in the 30 µF capacitor = V₁potential difference in 10 µF capacitor = 20 VSince the potential difference between the two capacitors are different, the two capacitors are in series connection.
In series circuit arrangement, the quantity of charge flowing in each capacitor is the same.
[tex]Q_{30\ \mu F} = Q_{10 \ \mu F}[/tex]
[tex]Q_{10 \ \mu F} = CV = 10\times 10^{-6} \times 20 = 0.0002 \ C[/tex]
The potential difference are different and the total potential is given as;
[tex]V_{T} = V_1 + V_2\\\\V_1 = \frac{Q}{C_1} \\\\V_2 = \frac{Q}{C_2} \\\\V_1+V_2 = \frac{Q}{C_1} + \frac{Q}{C_2}\\\\V_1 + V_2 = Q(\frac{1}{C_1} + \frac{1}{C_2} )\\\\V_1 + 20 = Q(\frac{1}{C_1} + \frac{1}{C_2} )\\\\V_1+ 20 = \frac{Q(C_2+ C_1)}{C_1 C_2} \\\\V_1 = \frac{Q(C_2+ C_1)}{C_1 C_2} - 20[/tex]
[tex]V_1 = \frac{0.0002(10\times 10^{-6}\ + \ 30\times 10^{-6})}{(30\times 10^{-6}) (10\times 10^{-6})} - 20\\\\V_1 = \frac{8\times 10^{-9}}{3\times 10^{-10}} - 20\\\\V_1 = 26.67 - 20\\\\V_1 = 6.67 \ V[/tex]
Thus, the unknown potential across the 30-µF capacitor is 6.67 V.
Learn more here:https://brainly.com/question/23899758
For each of the following statements about deep-water waves, determine if the statement is true or false, then explain why: The longer the wave, the deeper the wave base. The greater the wave height, the deeper the wave base. The longer the wave, the faster the wave travels. The greater the wave height, the faster the wave travels. The faster the wave, the greater the wave height.
Answer:
The longer the wave, the deeper the wave base - True
The greater the wave height, the deeper the wave base - false
The longer the wave, the faster the wave travels- true
The greater the wave height, the faster the wave travels- false
The faster the wave, the greater the wave height - False
Explanation:
When a wave has a high length it means that the wave base will be deeper.
The longer the wave, the deeper the wave base - True
When the weight height is big , the wave base will be deeper.
The greater the wave height, the deeper the wave base - false
The longer the wave, the faster the wave travels- true
The greater the wave height, the faster the wave travels- false
The faster the wave, the greater the wave height - False
1. The first stage of stellar formation is the assembly (or formation) of a_______ . 2. Stars form in clouds. 3. When a cloud collapses it into smaller and smaller pieces till those pieces reach stellar masses. 4. As the density increases, the fragments become_______ , which________ the temperature of the cloud and inhibits further fragmentation. 5. The _______then condense into rotating globs of gas that serve as stellar embryos. 6. During this stage the surface temperature_______ and luminosity_________ despite decreasing size. 7. The central temperature and pressure increase as the potential energy is converted to energy due to contraction.
Answer: The keywords to input into the blank spaces were omitted which are ; fragments, increases, decreases, opaque, raises, molecular, protostar, gravitational, thermal.
Please find the answers for the blank spaces in the explanation column
Explanation:
1. The first stage of stellar formation is the assembly (or formation) of a_PROTOSTAR______ . 2. Stars form in MOLECULAR clouds. 3. When a cloud collapses, it FRAGMENTS into smaller and smaller pieces till those pieces reach stellar masses. 4. As the density increases, the fragments become_OPAQUE______ , which___RAISES_____ the temperature of the cloud and inhibits further fragmentation. 5. The __FRAGMENTS_____then condense into rotating globs of gas that serve as stellar embryos. 6. During this stage the surface temperature INCREASES_______ and luminosity__INCREASES_______ despite decreasing size. 7. The central temperature and pressure increase as the GRAVITATIONAL potential energy is converted to energy due to THERMAL contraction.
The above describes the evolution or formation of stars which begins with the collapse of a molecular cloud by gravitational force, this collapse cause the molecular cloud to fragment with the release of heat --Gravitation potential energy causing an increased temperature and pressure of the newly condensing fragment with increasing luminosity known as a Protostar.
1. A student gathered two boxes of the same size made of different materials: glass and clear plastic. She placed them on a windowsill in the sun for an hour and then measured the temperature of the air in each box. Which statement best describes the purpose of the experiment? to relate the type of box material to the temperature of the air within the box to relate the size of the box to the temperature of the air within the box to relate the type of box material to the mass of the box to relate the amount of time a box is exposed to sunlight to the temperature of the air within the box 2. What is the average time for the toy car to move 1.0 m on dirt? 20.2 s 24.4 s 28.1 s 60.7 s 3. A student collected data about the distance a ball falls over time. Which type of graph should he use to represent the data? circle graph scatterplot histogram bar graph
Answer:
1. to relate the type of box material to the temperature of the air within the box
2. Question is incomplete
3. scatterplot
Explanation:
1. The only thing done differently in this experiment is the type of material used in making the boxes, hence the experiment must be about that. Before proceeding to answering this question, we must have this at the back of our minds.
We can gather from the experiment that the boxes are of the same size and were subjected to sunlight for an hour (the same time duration for both). Hence, the temperature of the air inside the box will only be affected by the type of material the box is made of since the boxes have the same size and were subjected to sunlight for the same duration.
From the options provided, the best description for this experiment is; to relate the type of box material to the temperature of the air within the box.
2. The question is incomplete. The value for speed/velocity needed to calculate the average time is missing.
However, the formula needed here is velocity = distance ÷ time
3. There are two variables in this experiment; distance and time
The type of graph that shows two variables on it (of the options provided) is the scatterplot.
A ship sets out to sail to a point 123 km due north. An unexpected storm blows the ship to a point 112 km due east of its starting point. (a) How far and (b) in what direction (as an angle from due east, where north of east is a positive angle) must it now sail to reach its original destination
Answer:
Explanation:
We shall represent the point of destination and point of new starting point in vector form .
i and j will represent east and north .
point of destination = 123 j
starting point = 112 i
distance between the two
D = 123 j - 112 i
magnitude of D = √ ( 123² + 112² )
= 166.35 km
Direction of D
Tanθ = - 123 / 112
= - 1.09
θ = 132.54 degree from east in positive angle .
give an example of a balanced force and explain what makes it a balanced force
in this system, potential and kinetic energy are ____ proportional.
Answer:
Inversely proportional
Explanation:
P.E ∞ h
K.E ∞ v
v ∞ 1/h
Therefore
K.E ∞ 1/h
Then
P.E ∞ 1/(K.E)
Answer:
Inversely
Explanation:
Which statement describes one feature of Rutherford's model of the atom?
O The atom is mostly empty space.
O The atom cannot be divided into smaller particles.
O Electron clouds are regions where electrons are likely to be found.
O The electrons are located within the positive material of the nucleus.
Answer:
The atom is mostly empty space.
Explanation:
Ernest Rutherford in the year 1911 developed a model of an atom. In his model the atom was shown that the atom is mostly empty spaces composed of negative electrons which orbits round a positive nucleus just like planets revolving round the sun.
Rutherford came up with this model by performing experiments in 1909 which involves the scattering of alpha particles on a thin gold foil. From this experiments he came up with his model.
Answer:
A!
Explanation:
The atom is mostly empty space.
as fast as you can find the answer
Answer:
Explanation:
a) From the diagram, the load will be expressed in newton. The load will be the weight of the box on the inclined plane.
Load = mass * acceleration due to gravity.
Given the mass of the object = 100kg
acceleration due to gravity = 9.8m/s²
Load (in Newton) = 100*9.8
Load (in Newton) = 980N
b) The formula for calculating the velocity ratio of an inclined plane is expressed as VR = 1/sinθ where θ is the angle of inclination.
Given θ = 30°,
VR = 1/sin30°
VR = 1/0.5
VR = 1/(1/2)
VR = 1* 2/1
VR = 2
The velocity ratio is 2.
c) Length of the inclined plane can be calculated using the SOH, CAH, TOA trigonometry identity.
According to SOH, sinθ = opposite/hypotenuse
sin30° = 1/2 = opp/hyp
This shows that the opposite side of the triangle is 1 and the hypotenuse is 2. The length if the inclined is the length of the longest side i.e the hypotenuse. Hence the length of the inclined plane is 2m
d) Mechanical Advantage is the ratio of the load to the effort applied on an object.
Given the Load = 980N and the effort applied to the load on the incline plane = 400N
MA = Load/Effort
MA = 980/400
MA = 2.45
e) Efficiency = MA/VR * 100
Efficiency = 2.45/2 * 100
Efficiency = 122.5%
state the reason why wick lamps are made of cotton
Answer:
Reason:- We use cotton to make the wick of a spirit lamp because cotton has thread strands which act like fine capillaries and help in drawing up a steady supply of oil in the lamp for burning by capillary action
Explanation:
With the aid of a suitable diagram, explain what is meant by an electromagnetic wave.
Answer:
Electromagnetic waves or EM waves are waves that are created as a result of vibrations between an electric field and a magnetic field. In other words, EM waves are composed of oscillating magnetic and electric fields.
Explanation:
anyone can solve these numerical please.
Explanation:
2. Sum the torques about the fulcrum.
(450 N) (2 m) − (350 N) x = 0
x = 2.57 m
3. Sum the torques about the fulcrum.
(3600 N) (0.20 m) − F (0.90 m) = 0
F = 800 N
Mechanical advantage is the ratio between the load force and effort force.
MA = 3600 N / 800 N
MA = 4.5
Velocity ratio is the mechanical advantage divided by efficiency. Assuming the lever is 100% efficient:
VR = 4.5 / 1
VR = 4.5
4. Mechanical advantage is the ratio between the load force and effort force.
MA = 900 N / 600 N
MA = 1.5
The velocity ratio is the distance moved by the effort divided by the distance moved by the load. For a 3 pulley system, VR = 3.
Efficiency is mechanical advantage divided by velocity ratio.
e = 1.5 / 3
e = 0.50
5. Sum the torques about the fulcrum.
(-300 N) (0.10 m) + F (0.03 m) = 0
F = 1000 N
