us
Which of the following is a chemical property?
A. Hardness
B. Flammability
C. Malleability
D. Melting point
Reset Selection

Answer:

Explanation:

Can you provide a picture? I can outline the reactions though. a) will make a Z double bond from a triple bond and then peroxyacid can do epoxidation. b) will make the Z double bond then ozonolysis to double bond will create to aldehyde compounds. c) is essentially useless unless there is a ketone or aldehyde in the compound already since H2/Pd will fully reduce the alkyne (which I am assuming is present) and so the peroxyacid can't do epoxidation and can only do baeyer villiger oxidation, and d) reduces the alkyne to an E alkene and then do epoxidation to give an epoxide (with trans steroechemistry)

Answer:

Explanation:

CCl4 => C + 2Cl2

Answer: The pH of 0.10 M [tex]Cu(NO_{3})_{2}(aq)[/tex] is 4.49.

Explanation:

Given: Initial concentration of [tex]Cu(H_{2}O)^{2+}_{6}[/tex] = 0.10 M

[tex]K_{a} = 1.0 \times 10^{-8}[/tex]

Let us assume that amount of [tex]Cu(H_{2}O)^{2+}_{6}[/tex] dissociates is x. So, ICE table for dissociation of  [tex]Cu(H_{2}O)^{2+}_{6}[/tex]  is as follows.

                               [tex]Cu(H_{2}O)^{2+}_{6} \rightleftharpoons [Cu(H_{2}O)_{5}(OH)]^{+} + H_{3}O^{+}[/tex]

Initial:                       0.10 M                       0                       0

Change:                    -x                              +x                      +x

Equilibrium:           (0.10 - x) M                    x                        x

As the value of [tex]K_{a}[/tex] is very small. So, it is assumed that the compound will dissociate very less. Hence, x << 0.10 M.

And, (0.10 - x) will be approximately equal to 0.10 M.

The expression for [tex]K_{a}[/tex] value is as follows.

[tex]K_{a} = \frac{[Cu(H_{2}O)^{2+}_{6}][H_{3}O^{+}]}{[Cu(H_{2}O)^{2+}_{6}]}\\1.0 \times 10^{-8} = \frac{x \times x}{0.10}\\x = 3.2 \times 10^{-5}[/tex]

Hence, [tex][H_{3}O^{+}] = 3.2 \times 10^{-5}[/tex]

Formula to calculate pH is as follows.

[tex]pH = -log [H^{+}][/tex]

Substitute the values into above formula as follows.

[tex]pH = -log [H^{+}]\\= - log (3.2 \times 10^{-5})\\= 4.49[/tex]

Thus, we can conclude that the pH of 0.10 M [tex]Cu(NO_{3})_{2}(aq)[/tex] is 4.49.

Answer:

The postabsorptive state (also called the fasting state) occurs when the food is already digested and absorbed, and it usually occurs overnight, when you sleep (if you skip meals for some days, you will enter in this state).

The catabolic state is the metabolic breakdown of molecules into simpler ones, releasing energy (heat) and utilizable resources.

Now, when you are in a postabsorptive state, the glucose levels start to drop, then the body starts to depend on the glycogen stores, which are catabolized into glucose, this is defined as the start of the postabsorptive state.

So yes, as the postabsorptive states, catabolic processes start to happen, so the statement is true.

Answer:

C). Half-reactions with SRP values greater than zero are spontaneous.

Explanation:

SRPs or Standard Reduction Potentials are characterized as the ability of a probable distinction among the anode and cathode of a usual/standard cell. It aims to examine the capacity of chemicals to reduce themselves.

The third statement asserts a true claim regarding the SRPs(Standard Reduction Potentials) that the 'half-reactions which take place with the SRP possesses the values higher than zero and they are unconstrained.' The other statements are incorrect as they either show the estimation of SRPs more than 0 or display them as being restricted. Thus, option C is the correct answer.

Answer:

is a nonpolar molecule with polar bonds

Answer:

Bromine radical formation is carried out in the presence of Br₂ and Cl₂ causing the normal selectivity not to be observed ( this causes the difference in activation energy to be reduced )

Explanation:

Why the normal selectivity expected for bromination is not observed

On the basis of selectivity and applying the Arrhenius equation the greater the difference between the activation energies the more the selectivity.

as seen in the formation of primary and secondary radicals in the Bromine radical formation. this difference is caused mainly by the propagation step ( exothermic ) . But the main reason why the the usual selectivity of bromination is not observed is because it Bromine radical formation is carried out in the presence of Br₂ and Cl₂ ( this causes the difference in activation energy to be reduced )

Answer:

a. increase.

Explanation:

Hello!

In this case, according to the given information, it turns out possible for us to tell that the common ion effect decreases the solubility of the ionic solid by firstly increasing the concentration of the common ion, which is further solved for the solubility in order to evidence the aforementioned decrease.

As an example, we can consider the solubility equilibrium for silver chloride:

[tex]Ksp=[Ag^+][Cl^-][/tex]

Which goes to:

[tex]Ksp=s^2[/tex]

Whereas s is the solubility to be solved for. However, when a silver- or chloride-containing solution is added, say 0.1 sodium chloride, the equilibrium expression changes to:

[tex]Ksp=(s)(s+0.1)[/tex]

Which turns out into a smaller value for s.

Regards!

Answer:

Al^3+

Explanation:

Solubility rules tell us what substances are soluble in water. Since NaCl was added and no precipitate was observed, the mercury II ion is absent.

Addition of Na2SO4 does not form a precipitate meaning that Ba^2+ is absent.

If a precipitate is formed when NaOH is added, the the ionic reaction is as follows;

Al^3+(aq) + 3 OH^-(aq) ------> Al(OH)3(s)

Answer:

я не знаю ответа :(

Explanation:

Answer:

The mass of silver carbonate precipitated is 5.18 grams.

Explanation:

Molarity of the silver nitrate solution = 0.671 M

Volume of the silver nitrate solution = 56.0 mL

[tex]1 mL = 0.001 L\\56.0 mL = 56.0\times 0.001 L=0.0560 L[/tex]

Moles of silver nitrate = n

[tex]Molarity=\frac{\text{Moles of compound}}{\text{Volume of solution in Liters}}\\\\0.671 M=\frac{n}{0.0560 L}\\n=0.671 M\times 0.0560 L=0.0376 mol[/tex]

Moles of silver nitrate used = 0.0376 mol

[tex]K_2CO_3+2AgNO_3\rightarrow Ag_2CO_3+2KNO_3[/tex]

According to the reaction, 2 moles of silver nitrate gives 1 mole of silver carbonate, then 0.0376 moles of silver nitrate:

[tex]=\frac{1}{2}\times 0.0376 mol=0.0188 \text{mol of }Ag_2CO_3[/tex]

Moles of the silver carbonate formed = 0.0188 mol

Molar mass of silver carbonate = 275.7453 g/mol

Mass of silver carbonate :

[tex]=275.7453 g/mol\times 0.0188 mol=5.1840 g\approx 5.18 g[/tex]

The mass of silver carbonate precipitated is 5.18 grams.

Answer:

5.25 moles of protons. Option e

Explanation:

Reaction between phosphoric acid and sodium hydroxide is neutralization.

We can also say, we have an acid base equilibrium right here:

H₃PO₄  +  3NaOH →  Na₃PO₄  +  3H₂O

Initially we have 5.25 moles of base.

We have data from the acid, to state its moles:

M = mol/L, so mol = M . L

mol = 1.75 moles of acid

If we think in the acid we know:

H₃PO₄  →  3H⁺  +  PO₄⁻³

We know that 1 mol of acid can give 3 moles of protons (hydrogen ions)

If we have 1.75 moles of acid, we may have

(1.75 . 3) /1 = 5.25 moles of protons

These moles will be neutralized by the 5.25 moles of base

H₃O⁺  +  OH⁻  ⇄  2H₂O     Kw

In a titration of a weak acid and a strong base, we have a basic pH

Answer:

5×6.02×1023

Explanation:

there are 5×6.02×1023 molecules of p4010 in 5mole. there are four P atoms in a single molecule of p4010

Answer:

See explanation

Explanation:

Sugar is a polar crystalline substance. The sugar crystal is capable of dissolving in water since it is polar.

When sugar dissolves in water, a sugar solution is formed. If I want to separate the sugar from the water in the solution, I have to boil the solution to a very high temperature.

When I do that, the water in the sugar solution is driven off and the pure sugar crystal is left behind.

Answer:

I do not speak Spanish.

Explanation:

Answer:

Atoms are similar in the way that their nuclei contain only protons and neutrons.

Answer:

All things are made of atoms, and all atoms are made of the same three basic particles - protons, neutrons, and electrons. But, all atoms are not the same. The difference in the number of protons and neutrons in atoms account for many of the different properties of elements.

I hope this helps :)

Answer:

See explanation and image attached

Explanation:

The acid-catalyzed hydrolysis of a nitrile to give a carboxylic acid occurs by initial protonation of the nitrogen atom. This step is shown in the image attached.

The next step is the nucleophilic addition of water. The task is to show the movement of electrons in this step of the reaction mechanism. This was clearly shown in the image attached to this answer.

Answer:

The partial pressure will be "100 torr".

Explanation:

Given:

[tex]P_{Ar} = 300 \ torr[/tex]

By assuming Ar and Ne having 50 gm each, we get

mol of Ne = [tex]\frac{50}{20}[/tex]

                = [tex]2.5 \ mol[/tex]

mol of Ar = [tex]\frac{50}{40}[/tex]

               = [tex]1.25 \ mol[/tex]

now,

[tex]n_T= mol.A_r+mol.N_e[/tex]

     [tex]=1.25+2.5[/tex]

     [tex]=3.75[/tex]

then,

[tex]X_{Ar}=\frac{n_{Ar}}{n_T}[/tex]

       [tex]=\frac{1.25}{3.75}[/tex]

       [tex]=0.33[/tex]

hence,

The partial pressure of Ar will be:

⇒ [tex]P_{Ar} = P_T\times X_{AT}[/tex]

By substituting the values, we get

           [tex]=300\times 0.33[/tex]

           [tex]=100 \ torr[/tex]

The partial pressure of Ar in the mixture is 99.9 torr

Let the mass of both gas be 10 g

Next, we shall determine mole of each gas.

Mass = 10 g

Molar mass of Ne = 20 g/mol

Mole = mass / molar mass

Mole of Ne = 10 / 20

Mass = 10 g

Molar mass of Ar = 40 g/mol

Mole = mass / molar mass

Mole of Ar = 10 / 40

Next, we shall determine the mole fraction of Ar

Mole of Ne = 0.5 mole

Mole of Ar = 0.25 mole

Total mole = 0.5 + 0.25 = 0.75 mole

[tex]mole \: fraction \: = \frac{mole}{total \: mole} \\ \\ mole \: fraction \: of \:Ar = \frac{0.25}{0.75} \\ \\ mole \: fraction \: of \:Ar = 0.333 \\ \\ [/tex]

Finally, we shall determine the partial pressure of Ar

Mole fraction of Ar = 0.333

Total pressure = 300 torr

Partial pressure = mole fraction × total pressure

Partial pressure of Ar = 0.333 × 300

Learn more on partial pressure: https://brainly.com/question/15577259

Answer:

1. 1.00 gm

2. 50 ml

3. 38.93 ml

4. 11.07 ml

5. 0.01107 L

6. 0.010 moles / L

7. 0.0001107 moles

8. 0.0001107 moles

9. 0.00647042 grams

Explanation:

Silver nitrate can react with various compounds to form different products. The weight of products may be different from the original solution introduced due to combustion reaction, as heat energy is released during the chemical process.

Answer:

True

Explanation:

When two atoms are at infinite distance from each other, the both atoms posses high energy.

However, as they begin to approach each other, the distance between them gradually decreases and so does their energy.

A point is eventually reached when the potential energy curve reaches its minimum value. The internuclear distance between the two atoms at this point is called the bond length of the system.

Answer:

Oxidation half-reaction: 2 Fe (s) ----> 2 Fe³+ (aq) + 6e-

Reduction half-reaction: 3 Pb²+ (aq) + 6 e- ----> 3 Pb (s)

Explanation:

A redox reaction reaction is one in which oxidation and reduction occur simultaneously and to the same extent.

Oxidation involves a loss of electron, hence, a positive increase in the oxidation number of the atom or ion. The oxidation half-reaction is as follows:

2 Fe (s) ----> 2 Fe³+ (aq)

The metallic element iron, Fe , having an oxidation number of zero, loses three electrons to form the Fe³+ ion with a charge of +3. Since each atom loses three electrons each, The number of moles of electrons lost is six.

2 Fe (s) ----> 2 Fe³+ (aq) + 6e-

Reduction involves a gain of electrons, hence, a decrease in the oxidation number of the atom or ion. The reduction half-reaction is given below:

3 Pb²+ (aq) ---> 3 Pb (s)

The lead (ii) ion, Pb²+ having a charge of +2 gains two electrons each to become the neutral metallic lead atom, Pb, with oxidation number of zero. Since 3 moles of Pb²+ are reacting, 6 moles of electrons are gained.

3 Pb²+ (aq) + 6 e- ----> 3 Pb (s)

Explanation:

Chemical reactions can exhibit different rate constants at differing:

i)initial concentrations

ii)volumes of container

iii) temperatures

iv)none of the above.

The rate constant of a reaction is constant at a particular temperature.

It is not depending on the initial concentration of the reactants. It varies with temperature.

Thus, among the given options the correct answer is Temperatures.

Chemical reactions can exhibit different rate constant at different temperatures. Hence, the correct option is temperature.

The rate constant is the proportionality constant in the equation that expresses the relationship between the rate of a chemical reaction and the concentrations of the reacting substances.

Chemical reactions proceed at vastly different speeds depending on the nature of the reacting substances, the type of chemical transformation, the temperature, etc.

For a given reaction, the speed of the reaction will vary with the temperature, the pressure, and the amounts of reactants present.

The rate constant goes on increasing as the temperature goes up, but the rate of increase falls off quite rapidly at higher temperatures.

On the other hand, the volume of the container, initial concentration does not affect the rate constant.

Therefore, Chemical reactions can exhibit different rate constant at different temperatures. Hence, the correct option is temperature.

To learn more about rate constant, click here:

https://brainly.com/question/24658842

Answer:

[tex]Age=1040.55 million\ years[/tex]

Explanation:

From the question we are told that:

Initial Rock atoms [tex]a_1=2200atoms of 235^U[/tex]

Final Rock atom [tex]a_2=800 of  235^U[/tex]

Age of half life 713 million years

Generally the equation for Age is mathematically given by

[tex]\frac{1}{2^n}=\frac{800}{2200}[/tex]

[tex]\frac{1}{2^n}=\frac{1}{2.750}[/tex]

[tex]n=1.46[/tex]

Therefore

[tex]Age=713*1.46[/tex]

[tex]Age=1040.55 million\ years[/tex]

Answer:

true

Explanation:

Answer:

4.77mol is the correct answer

Answer:

a. 6mL of ethanol and 35mL of water: the solute is ethanol (smallest volume) and the solvent is water (greater volume).

b. 300 g of water containing 8g of NaHCO3: the solute is NaHCO3 (smallest mass) and the solvent is water (greater mass).

c. 0.005L of CO2 and 2L of O2: the solute is CO2 (smallest volume) and the solvent is O2 (greater volume).

Explanation:

Hello there!

In this case, according to the given problem, it turns out possible for us to solve these questions by bearing to mind the fact that in a solution, we can find two substances, solute and solvent, whereas the former is in a smaller proportion in comparison to the latter; in such a way, we infer the following:

a. 6mL of ethanol and 35mL of water: the solute is ethanol (smallest volume) and the solvent is water (greater volume).

b. 300 g of water containing 8g of NaHCO3: the solute is NaHCO3 (smallest mass) and the solvent is water (greater mass).

c. 0.005L of CO2 and 2L of O2: the solute is CO2 (smallest volume) and the solvent is O2 (greater volume).

Regards!

Answer:

A: ΔH

Explanation:

Endothermic reactions are this that occur as a result of absorption of heat energy from the surroundings by the reactants to form new products.

Thus, we can say it is one with an increase in enthalpy (ΔH) of the system.

Thus, option A is correct.

Answer:

15.0 g

Explanation:

15.0% =0.150

100.0 g × 0.150= 15.0g

Sodium nitrate is "an inorganic compound with the formula of NaNO₃.

Inorganic compound is "a chemical compound that lacks carbon–hydrogen bonds".

15% = 0.15

100.0 g × 0.15= 15g

Hence, 15g of Sodium nitrate are needed to prepare 100 gms of a 15% by mass sodium nitrate.

To learn more about Sodium nitrate here

https://brainly.com/question/24256699

#SPJ2

Answer:

fjskeowkcnekvo Dee five votes come vote for dog even r