Two substances, M and N, have specific heats c and 2c. if heats Q and 4Q are supɔlied to Mand N, respectively, their changes in temperature become equal. If substance M has mass m, find the mass of substance N in terms of m

Answers

Answer 1

Answer:

If the mass of B is m and the temperature change is the same, the mass of B will be 2m.

Explanation:

Q = mcT

T = mc/Q

M = 4Q/2cT........... (1)

T = Q/mc

Plug this in equation 1.

M = 4Q/(2c × Q/mc)  = 4Q ÷ 2Q/m  = 4Q × m/2Q = 2m


Related Questions

a volcano that may erupt again at some time in the distant future is

Answers

The answer is a dormant volcano

1. A 63 kg driver gets into an empty taptap to start the day's work. The springs compress 1.5x10-2 m. What is the effective spring constant of the spring system in the taptap?
2. After driving a portion of the route, the taptap is fully loaded with a total of 24 people including the driver, with an average mass of 68 kg per person. In addition, there are three 15-kg goats, five 3-kg chickens, and a total of 25 kg of bananas on their way to the market. Assume that the springs have somehow not yet compressed to their maximum amount. How much are the springs compressed?

Answers

(1) When the driver is at rest, the restoring force exerted by spring is equal in magnitude to the driver's weight, so that

F = s - mg = 0   ==>   s = mg = 617.4 N

If the spring is compressed 0.015 m, then the spring constant k is such that

617.4 N = k (0.015 m)   ==>   k = 41,160 N/m ≈ 41 kN/m

(2) The total mass of the passengers is

24 (68 kg) + 3 (15 kg) + 5 (3 kg) + 25 kg = 1717 kg

so that if everyone is at rest, the spring is compressed a distance x such that

kx = (1717 kg) g   ==>   x0.41 m

Why is oiling done time and again in a sewing machine?

Answers

Answer:

to prevent friction on the surfaces

Answer:

Explanation:

Oiling reduces friction between parts with relative motion between them.

Repeated oiling is needed as the film of oil reducing the friction becomes thinner with time as some of the oil gets pushed off of the areas of motion where it can no longer be useful.

Oil also becomes oxidized which reduces the oil's ability to decrease friction.

Oil can also be fouled by dirt, lint or other material. This added material becomes coated in oil and typically gets sequestered away from the moving parts reducing the oil available for lubrication purposes.

A parallal capacitor consists of two Squere plates each of Side 25cm, 3. Omm apart. If a potential difference of 2000volts is applied, calculate the change in the plate with
1.air
2. paper of relative permittity 2.5, fully the space between them E=8.9×10^-12​

Answers

Answer:poop

Explanation:

poop

The Earth’s orbit around the Sun is slightly elliptical. At Earth's closest approach to the Sun (perihelion) the orbital radius is 1.471×10^11m, and at its farthest distance (aphelion) the orbital radius is 1.521×10^11m.

a. Find the difference in gravitational potential energy between when the Earth is at its aphelion and perihelion radii.
b. If the orbital speed of the Earth is 29,290 m/s at aphelion, what is its orbital speed at perihelion?

Answers

Answer:

1.25

Explanation:

The valves in the heart open and close to move blood in between heart chambers. O a) three directions O b) two directions O c) four directions d) one direction

Answers

Hi,

The valves in the heart open and close to move blood in between heart chambers.

Answer:

d) one direction

A long string is moved up and down with simple harmonic motion with a frequency of 46 Hz. The string is 579 m long and has a total mass of 46.3 kg. The string is under a tension of 3423 and is fixed at both ends. Determine the velocity of the wave on the string. What length of the string, fixed at both ends, would create a third harmonic standing wave

Answers

Answer:

a)  [tex]v=206.896m/s[/tex]

b)  [tex]L=6.749m[/tex]

Explanation:

From the question we are told that:

Frequency [tex]F=46Hz[/tex]

Length [tex]l=579m[/tex]

Total Mass [tex]T=4.3kg[/tex]

Tension [tex]T=3423[/tex]

a)

Generally the equation for velocity is mathematically given by

[tex]v=\sqrt{\frac{T}{\rho}}[/tex]

Where

[tex]\pho=m*l\\\\\pho=46*579\\\\\pho=0.0799kg/m[/tex]

Therefore

[tex]v=\sqrt{\frac{3423}{0.0799}}[/tex]

[tex]v=206.896m/s[/tex]

b)

Generally the equation for length of string is mathematically given by

[tex]L=\frac{3\lambda}{2}[/tex]

Where

[tex]\lambda=\frac{v}{f}[/tex]

[tex]\lambda=\frac{206.89}{46}[/tex]

[tex]\lambda=4.498[/tex]

Therefore

[tex]L=\frac{3*4.498}{2}[/tex]

[tex]L=6.749m[/tex]

Andrea's near point is 20.0 cm and her far point is 2.0 m. Her contact lenses are designed so that she can see objects that are infinitely far away. What is the closest distance that she can see an object clearly when she wears her contacts?

Answers

Answer:

the closest distance that she can see an object clearly when she wears her contacts is 22.2 cm

Explanation:

Given the data in the question,

near point = 20 cm

far point = 2 m = 200 cm

Now, for an object that is infinitely far away, the image is at is its far point.

so using the following expression, we can determine the focal length

1/f = 1/i + 1/o

where f is the focal length, i is the image distance and o is the object distance.

here, far point i = 2 m = 200 cm  and v is ∞

so we substitute

1/f = 1/(-200 cm)  +  1/∞

f = -200 cm

Also, for object at its closest point, the image appear at near point,

so

1/f = 1/i + 1/o

we make o the subject of formula

o = ( i × f ) / ( i - f )

given that near point i = 20 cm

we substitute

o = ( -20 × -200 ) / ( -20 - (-200) )

o = 4000 / 180

o = 22.2 cm

Therefore, the closest distance that she can see an object clearly when she wears her contacts is 22.2 cm

A cylinder is given a push and then rolls up an inclined plane. If the origin is the starting point, sketch the position, velocity, and acceleration of the cylinder vs. time as it goes up and then down the plane.

Answers

It will take a shorter amount of time for the cylinder to go down the plane down off the plane Because more pressure is applied one going up then going down there’s no pressure at all it’s the gravity is helping

A battery is two or more individual cells connected together. Some large trucks utilize large 24 volt lead acid batteries. How many lead acid cells would be required to construct a battery with this voltage

Answers

Answer:

 #_pile = 12 celdas

Explanation:

Lead acid sulfur batteries generate each cell a potential of 2 volts. By colonato to reach the voltage of 24 volts

        #_pile = 24/2

       #_pile = 12 cledas

serially connected

The lines in the emission spectrum of hydrogen result from __________.
a. energy given off in the form of visible light when an electron moves from a higher energy state to a lower energy state
b. protons given off when hydrogen burns
c. electrons given off by hydrogen as it cools
d. electrons given off by hydrogen when it burns
e. decomposing hydrogen atoms.

Answers

Answer:

Option (a) is correct.

Explanation:

The lines in the emission spectrum of hydrogen is due to the transfer of electrons form higher energy levels to the lower energy levels.

When the electrons transfer from one level of energy that is higher level of energy to the other means to the lower level of energy then they emit some photons which having the frequency or the wavelength in the visible region.

Assume that the car on the left makes a quick turn to the left. According to inertia, your body will resist a change and still want to go in the original direction. In which direction with the passenger slide?

Answers

Answer:

to the right

Explanation:

if the car turns to the lift, the body forces energy to the left side, so according to the first law of Newton, the body will move to the right side to resist the sudden motion.

True or false : conservation of energy gives a relationship between the speed of a falling object and the height from which it was dropped

Answers

Answer:

truee

Explanation:

Two streams merge to form a river. One stream has a width of 8.3 m, depth of 3.2 m, and current speed of 2.2 m/s. The other stream is 6.8 m wide and 3.2 m deep, and flows at 2.4 m/s. If the river has width 10.4 m and speed 2.8 m/s, what is its depth?

Answers

Answer:

The depth of the resulting stream is 3.8 meters.

Explanation:

Under the assumption that streams are formed by incompressible fluids, so that volume flow can observed conservation:

[tex]\dot V_{1} + \dot V_{2} = \dot V_{3}[/tex] (1)

All volume flows are measured in cubic meters per second.

Dimensionally speaking, we can determine the depth of the resulting stream ([tex]h_{3}[/tex]), in meters, by expanding (1) in this manner:

[tex]w_{1}\cdot h_{1}\cdot v_{1} + w_{2}\cdot h_{2}\cdot v_{2} = w_{3}\cdot h_{3}\cdot v_{3}[/tex]

[tex]h_{3} = \frac{w_{1}\cdot h_{1}\cdot v_{1}+w_{2}\cdot h_{2}\cdot v_{2}}{w_{3}\cdot v_{3}}[/tex] (2)

[tex]v_{1}, v_{2}[/tex] - Speed of the merging streams, in meters per second.

[tex]h_{1}, h_{2}[/tex] - Depth of the merging streams, in meters.

[tex]w_{1}, w_{2}[/tex] - Width of the merging streams, in meters.

[tex]w_{3}[/tex] - Width of the resulting stream, in meters.

[tex]v_{3}[/tex] - Speed of the resulting stream, in meters per second.

If we know that [tex]w_{1} = 8.3\,m[/tex], [tex]h_{1} = 3.2\,m[/tex], [tex]v_{1} = 2.2\,\frac{m}{s}[/tex], [tex]w_{2} = 6.8\,m[/tex], [tex]h_{2} = 3.2\,m[/tex], [tex]v_{2} = 2.4\,\frac{m}{s}[/tex], [tex]w_{3} = 10.4\,m[/tex] and [tex]v_{3} = 2.8\,\frac{m}{s}[/tex], then the depth of the resulting stream is:

[tex]h_{3} = \frac{(8.3\,m)\cdot (3.2\,m)\cdot \left(2.2\,\frac{m}{s} \right) + (6.8\,m)\cdot (3.2\,m)\cdot \left(2.4\,\frac{m}{s} \right)}{(10.4\,m)\cdot \left(2.8\,\frac{m}{s} \right)}[/tex]

[tex]h_{3} = 3.8\,m[/tex]

The depth of the resulting stream is 3.8 meters.

A singly charged 7Li ion has a mass of 1.16 10-26 kg. It is accelerated through a potential difference of 523 V and subsequently enters a uniform magnetic field of magnitude 0.370 T perpendicular to the ion's velocity. Find the radius of its path.

Answers

Answer:

[tex]R=0.023m[/tex]

Explanation:

From the question we are told that:

Mass [tex]m=1.16*10^{-26}[/tex]

Potential difference [tex]V=523V[/tex]

Magnitude [tex]m=0.370 T[/tex]

Generally the equation for Velocity is mathematically given by

[tex]\frac{1}{2}mv^2=ev[/tex]

[tex]v=\frac{2ev}{m}[/tex]

[tex]v=\frac{2*1.6*10^{-19}*542}{1.16*10^{-26}}[/tex]

[tex]v=12.22*10^4m/s[/tex]

Generally the equation for Force is mathematically given by

[tex]F=qvBsin \theta[/tex]

Where

[tex]qVB=m\frac{v^2}{R}[/tex]

[tex]F=m\frac{v^2}{R}sin\theta[/tex]

Therefore

[tex]R=\frac{mv}{qB sin \theta}[/tex]

[tex]R=\frac{1.6*10^{-26}*12.2*10^{4}}{1.60*10^{-19}*0.394 sin 90}[/tex]

[tex]R=0.023m[/tex]

A 25g rock is rolling at a speed of 5 m/s. What is the kinetic energy of the rock?

Answers

Answer:

The answer is 312.5j

Explanation:

The kinetic energy (KE):

KE=1/2*m*v^2

M= mass of the object

v= velocity of the object

We have;

m=25g

v=5m/s

KE=1/2*25g*5^2m/s

KE =312.5j

Assume that a friend hands you a 10-newton box to hold for her. If you hold the box without moving it at a height of 10 meters above the ground, how much work do you do

Answers

Answer:

100 Joules

Explanation:

Applying,

W = mgh................... Equation 1

Where W = workdone to hold the box above the ground, mg = weight of the box, h = height of the box.

From the question,

Given: mg = 10 newtons, h = 10 meters.

Substitute these values into equation 1

W = 10×10

W = 100 Joules.

Hence the amount of workdone is 100 Joules

2. A parallel-plate capacitor has a capacitance of C. If the area of the plates is doubled and
the distance between the plates is doubled, what is the new capacitance?
A) C/4
B) C/2
C)C
D) 4C

Answers

(C)

Explanation:

The capacitance C of a parallel plate capacitor is given by

[tex]C = \epsilon_0 \dfrac{A}{d}[/tex]

Let C' be the new capacitance where the area and the plate separation distance are doubled. This gives us

[tex]C' = \epsilon_0\dfrac{A'}{d'} = \epsilon_0\left(\dfrac{2A}{2d}\right) = \epsilon_0 \dfrac{A}{d} = C[/tex]

which one is more powerful hydrogen bomb or atom bomb and why?​

Answers

Hydrogen bomb is more powerful than atom bomb

Hydrogen has a calorie value of 150000KJ .It is very much than nuclear bomb or atom bombScientists also told that Hydrogen bomb is more powerful.But both bombs are destructive.

A surveyor measures the distance across a straight river by the following method: Starting directly across from a tree on the opposite bank, he walks x = 106 m along the riverbank to establish a baseline. Then he sights across to the tree. The angle from his baseline to the tree is = 32.8°. How wide is the river?

Answers

Answer:

x = 68.3 m

Explanation:

tan 32.8 = x / 106

A proton traveling at 17.6° with respect to the direction of a magnetic field of strength 3.28 mT experiences a magnetic force of 9.14 × 10-17 N. Calculate (a) the proton's speed and (b) its kinetic energy in electron-volts.

Answers

Answer:

a) The proton's speed is 5.75x10⁵ m/s.

b) The kinetic energy of the proton is 1723 eV.  

Explanation:

a) The proton's speed can be calculated with the Lorentz force equation:

[tex] F = qv \times B = qvBsin(\theta) [/tex]     (1)          

Where:

F: is the force = 9.14x10⁻¹⁷ N

q: is the charge of the particle (proton) = 1.602x10⁻¹⁹ C

v: is the proton's speed =?

B: is the magnetic field = 3.28 mT

θ: is the angle between the proton's speed and the magnetic field = 17.6°

By solving equation (1) for v we have:

[tex]v = \frac{F}{qBsin(\theta)} = \frac{9.14 \cdot 10^{-17} N}{1.602\cdot 10^{-19} C*3.28 \cdot 10^{-3} T*sin(17.6)} = 5.75 \cdot 10^{5} m/s[/tex]

Hence, the proton's speed is 5.75x10⁵ m/s.

b) Its kinetic energy (K) is given by:

[tex] K = \frac{1}{2}mv^{2} [/tex]

Where:

m: is the mass of the proton = 1.67x10⁻²⁷ kg

[tex] K = \frac{1}{2}mv^{2} = \frac{1}{2}1.67 \cdot 10^{-27} kg*(5.75 \cdot 10^{5} m/s)^{2} = 2.76 \cdot 10^{-16} J*\frac{1 eV}{1.602 \cdot 10^{-19} J} = 1723 eV [/tex]  

Therefore, the kinetic energy of the proton is 1723 eV.

I hope it helps you!        

The Michelson-Morley experiment was designed to measure Group of answer choices the velocity of the Earth relative to the ether. the relativistic momentum of the electron. the relativistic mass of the electron. the acceleration of gravity on the Earth's surface. the relativistic energy of the electron.

Answers

Answer:

The Michelson-Morley was designed to detect the motion of the earth through the ether.

No such relation was found and the speed of light is assumed to be the same in all reference frames.

The Michelson-Morley experiment was designed to measure: A. the velocity of the Earth relative to the ether.

Michelson-Morley experiment is an experiment which was first performed in Germany by the American physicist named, Albert Abraham Michelson between 1880 to 1881.

However, the experiment was later modified and refined by Michelson and Edward W. in 1887.

The main purpose of the Michelson-Morley experiment was to measure the velocity of planet Earth relative to the luminiferous ether, which is a medium in space that is hypothetically said to carry light waves.

In conclusion, the Michelson-Morley experiment was designed to measure the velocity of the Earth relative to the hypothetical luminiferous ether.

Read more: https://brainly.com/question/13187705

One charge is fixed q1 = 5 µC at the origin in a coordinate system, a second charge q2 = -3.2 µC the other is at a distance of x = 90 m from the origin.

What is the potential energy of this pair of charges?

Answers

Answer:

5.4uC

Explanation:

If a proton and electron both move through the same displacement in an electric field, is the change in potential energy associated with the proton equal in magnitude and opposite in sign to the change in potential energy associated with the electron?

a. The magnitude of the change is smaller for the proton.
b. The magnitude of the change is larger for the proton.
c. The signs Of the two changes in potential energy are opposite.
d. They are equal in magnitude.
e. The signs of the two changes in potential energy are the same.

Answers

Answer: They are equal in magnitude.

- The signs of the two changes in potential energy are opposite

Explanation:

When the proton and electron both move through the same displacement in an electric field, the change in potential energy that is associated with the proton is equal in magnitude.

Also, it should be noted that the signs of the two changes in potential energy are opposite.

A fan is turned off, and its angular speed decreases from 10.0 rad/s to 6.3 rad/s in 5.0 s. What is the magnitude of the angular acceleration of the fan?
A) 0.37 rad/s2
B) 11.6 rad/s2
C) 0.74 rad/s2
D) 0.86 rad/s2
E) 1.16 rad/s2

Answers

Answer:

chk photo

Explanation:

What is science?Give two examples of living beings?

Answers

Answer:

the study of the past

Explanation:

dogs and cats

A 100 kg man is one fourth of the way up a 4.0 m ladder that is resting against a smooth, frictionless wall. The ladder has mass 25 kg and makes an angle of 56 degrees with the ground. What is the magnitude of the force of the wall on the ladder at the point of contact, if this force acts perpendicular to the wall and points away from the wall

Answers

Answer:

[tex]N_f=248N[/tex]

Explanation:

From the question we are told that:

Mass [tex]m=100kg[/tex]

Ladder Length [tex]l=4.0m[/tex]

Mass of Ladder [tex]m_l=25kg[/tex]

Angle [tex]\theta=56 \textdegree[/tex]

Generally the equation for Co planar forces is mathematically given by

[tex]mgcos \theta *2+Mgcos\theta*1 -N_fsin \theta*4=0[/tex]

Therefore

[tex]25*9.81cos 56 *2+100*9.81cos56*1 -N_fsin 56*4=0[/tex]

[tex]N_f=248N[/tex]

For example, we can take Water
In (A) Water has same mass and great volume
In (B) Water has same mass and lower volume
Will there be any change in its density then?

Answers

Answer:

yes there will be change in its density

Two horizontal pipes have the same diameter, but pipe B is twice as long as pipe A. Water undergoes viscous flow in both pipes, subject to the same pressure difference across the lengths of the pipes. If the flow rate in pipe B is Q=ΔV/Δt what is the flow rate in pipe A? Viscosity: Two horizontal pipes have the same diameter, but pipe B is twice as long as pipe A. Water undergoes viscous flow in both pipes, subject to the same pressure difference across the lengths of the pipes. If the flow rate in pipe B is what is the flow rate in pipe A?
a) Q√2
b) 16Q
c) 2Q
d) 4Q
e) 8Q

Answers

Answer:

c) 2Q

Explanation:

From the given information:

The pressure inside a pipe can be expressed by using the formula:

[tex]\Delta P = \dfrac{128 \mu L Q}{\pi D^4}[/tex]

Since the diameter in both pipes is the same, we can say:

[tex]D = D_A = D_B[/tex]

where;

length of the first pipe A [tex]L_A = L[/tex] and the length of the second pipe B [tex]L_B = 2L[/tex]

Since the difference in pressure is equivalent in both pipes:

Then:

[tex]\dfrac{128 \mu L_1Q_1}{\pi D_1^4} = \dfrac{128 \mu L_2Q_2}{\pi D_2^4}[/tex]

[tex]\dfrac{ L_1Q_1}{D_1^4} = \dfrac{ L_2Q_2}{D_2^4}[/tex]

[tex]\dfrac{ LQ_1}{D^4} = \dfrac{ 2LQ}{D^4}[/tex]

[tex]\mathbf{Q_1 = 2Q}[/tex]

The flow rate in pipe B is 2Q of the flow rate of the pipe A

What is flow rate?

The flow rate is defined as the flow of the fluid across the cross section in per unit time.

From the given information:

The pressure inside a pipe can be expressed by using the formula:

[tex]\Delta p=\dfrac{128\mu LQ}{\pi D^4}[/tex]

Since the diameter in both pipes is the same, we can say:

[tex]D=D_A=D_B[/tex]

where;

length of the first pipe A  [tex]L_A=L[/tex] and the length of the second pipe B  

[tex]L_B=2L[/tex]

Since the difference in pressure is equivalent in both pipes:

Then:

[tex]\dfrac{128\mu L_1Q_1}{\pi D_1^4}=\dfrac{128\mu L_2Q_2}{\pi D_2^4}[/tex]

[tex]\dfrac{L_1Q_1}{D_1^4}=\dfrac{L_2Q_2}{D_2^4}[/tex]

[tex]\dfrac{LQ_1}{D_1^4}=\dfrac{2LQ}{D_2^4}[/tex]

[tex]Q_1=2Q[/tex]

Hence the flow rate in pipe B is 2Q of the flow rate of the pipe A

To know more about Flow rate follow

https://brainly.com/question/26061120

I need help on Weight vs mass.

Answers

The difference between mass and weight is that mass is the amount of matter in a material, while weight is a measure of how the force of gravity acts upon that mass. Mass is the measure of the amount of matter in a body. Usually, the relationship between mass and weight on Earth is highly proportional; objects that are a hundred times more massive than a one-liter bottle of soda almost always weigh a hundred times more-approximately 1,000 newtons, which is the weight one would expect on Earth from an object with a mass slightly greater than 100 kilograms. In common usage, the mass of an object is often referred to as its weight, though these are in fact different concepts and quantities. In scientific contexts, mass is the amount of "matter" in an object (though "matter" may be difficult to define), whereas weight is the force exerted on an object by gravity. In other words, an object with a mass of 1.0 kilogram weighs approximately 9.81 newtons. Weight and mass are considered to be the same quantities. But many people tend to misuse these terms in their daily conversations. The main difference between weight and mass is that weight is the force of gravity by which the earth attracts towards it whereas mass is the amount of matter in an object.

Other Questions
A 111 kg linebacker running at 1.9 m/s and a 82 kg quarterback running at 3 m/s have a head-on collision in midair. The linebacker grabs and holds onto the quarterback. (a) What is their combined speed immediately after the collision Why does a small piece of steel rod sinks while a large steel oil tanker floats?Plss help thanks! pls include EXPLANATION and EXAMPLES that I can proof to people that has no knowledge ballet dancers learn five bassic positions for the arms and feedA. All ofB. Of everyC. AllD. Every Find an equation of the line through the given points right the answer and slope intercept form What is the meaning of the word clad?paintedadmirednoticeddressed . A cook buys six pumpkins. The mean mass of these pumpkins is 2,1 kg. The heaviest pumpkin, which has a mass of 3 kg, is used first. Calculate the mass of the remaining five pumpkins. Write the equation of the line that contains the point (2,1) and is parallel to the line 4x2y=3 Determine whether each of the following is a proposition. If so, write its negation. You may use symbols to help organize your thinking, but each negation should be given in plain English. a. All dogs go to heaven. b. Do you have a Nintendo Switch or a PlayStation 5 TRIG EXPERTS!! PLZZZ HELP! I'LL GIVE BRAINLY TO HELPFUL ANSWER AND REPORT SCAMS! Alex purchased 1/2 of a gallon of milk. He put 2/11 of the milk in a smoothie. How much of a gallon of milk did Alex put in his smoothie? Can someone help me write an essay on a busy market place for descriptive writing .I wrote one but my teacher said she wants me to describe it more please help me . career in chemistry list ten The total factory overhead for Norton Company is budgeted for the year at $300,000, divided into three activities: assembly, $200,000; setup, $50,000; and materials handling, $150,000. Norton manufactures two products: Product A and Product B. The activity-based usage quantities for each product by each activity are estimated as follows: Assembly Setup Materials HandlingProduct A 5,000 dlh 60,setups 25 movesProduct B 15,000 dlh 110 setups 250 movesTotal activity- 20,000 dlh 170setups 275 movesbase usageDetermine the activity rate for the set up activity.a. $166 per setup b. $294 per setup c. $1,764 per setup d. $118 per setup Answer please..... I'll be very grateful to you A to B is 420 mile away, A travels 40 mph and B travels 80 mph. they toward to each other. how many hour will they meet ? cho tam gic ABC c A(3;4), B(2;1), C(-1;-2). tm im M nm trn ng thng BC sao cho S ABC=3S ABM PLEASE HELP ASAP!!!!! The following graph shows a proportional relationship. What is the constant of proportionality between y and x in the graph? Questioning whether an error of law was made at the trial court lever is called a/an? Find the products using suitable identity:1.(3y 2z) (3y + 2z)2.105 98 Historical demand for a product is: DEMAND January 13 February 12 March 16 April 13 May 17 June 16 a. Using a weighted moving average with weights of 0.50 (June), 0.30 (May), and 0.20 (April), find the July forecast