Answer: The process by which the particles can reconvene entirely in one of the flasks is: NONSPONTANEOUS.
Explanation:
The spontaneity of a process can affect the distribution of energy and matter within the system. Different chemical or physical processes have the natural tendency to occur in one direction under a given set of conditions. For example:
--> when water is pour down a hill it naturally flows down but it requires outside energy maybe from a water pump to flow up the hill and ,
--> during an iron rust, iron that is exposed to atmosphere will corrode, but rust is not converted to iron without intentional chemical treatment.
Therefore, a spontaneous process is one that occurs naturally under certain conditions. While a NONSPONTANEOUS process, on the other hand, will not take place unless it is initiated by the continual input of energy from an outside source. A process that is spontaneous in one direction under a particular set of conditions is nonspontaneous in the REVERSE direction.
From the two flasks that where connected through a valve, once the valve was opened, the gas spontaneously becomes evenly distributed between the flasks. To reverse this, it would require an external energy making the reconvening of the particles back to the first flask a NONSPONTANEOUS PROCESS .
Each 5-ml teaspoon of Extra Strength Maalox Plus contains 450 mg of magnesium hydroxide and 500 mg of aluminum hydroxide. How many moles of hydronium ions H3O are neutralized by 1 teaspoon of antacid product?
Answer:
0.0347 moles of hydronium ions
Explanation:
The equation of the neutralization reaction between hydroxide and hydronium ions is given below:
H₃O+ (aq) + OH- (aq) ----> 2 H₂O (l)
From the equation above, 1 mole of hydroxide ions will neutralize one mole hydronium ions.
The moles of hydroxide ions present in 1 teaspoon or 5 mL of antacid product is calculated as follows:
Number of moles = mass / molar mass
Molar mass of Magnesium hydroxide, Mg(OH)₂ = 58 g/mol
Molar mass of aluminium hydroxide, Al(OH)₃ = 78 g/mol
Mass of magnesium hydroxide = 450 g = 0.45 g
Mass of aluminium hydroxide = 500 mg = 0.5 g
Moles of magnesium hydroxide = (0.45/58) moles
Moles of aluminium hydroxide = (0.5/78) moles
Equation of the ionization of magnesium hydroxide and aluminium hydroxide is given below:
Mg(OH)₂ (aq) ----> Mg²+ (aq) + 2 OH- (aq)
Al(OH)₃ (aq) ---> Al³+ (aq) + 3 OH- (aq)
Number of moles of hydroxide ions present in (0.45/58) moles of magnesium hydroxide = 2 × (0.45/58) moles = 0.0155 moles
Number of moles of hydroxide ions present in (0.5/78) moles of aluminium hydroxide = 3 × (0.5/78) moles = 0.0192 moles
Total moles of hydroxide ions = 0.0155 + 0.0192 = 0.0347 moles hydroxide ions
Therefore, 0.0347 moles of hydroxide ions will neutralize 0.0347 moles of hydronium ions.
6) Hydrogen gas can be generated from the reaction between aluminum metal and hydrochloric acid:
2 Al(s) + 6 HCl(aq) + 2 AICI3, (aq) + 3 H2(g)
a. Suppose that 3.00 grams of Al are mixed with excess acid. If the hydrogen gas produced is directly collected
into a 850 mL glass flask at 24.0 °C, what is the pressure inside the flask (in atm)?
b. This hydrogen gas is then completely transferred from the flask to a balloon. To what volume (in L) will the
balloon inflate under STP conditions?
c. Suppose the balloon is released and rises up to an altitude where the temperature is 11.2 °C and the pressure is
438 mm Hg. What is the new volume of the balloon (in L)?
Stoichiometry refers to the relationship between the moles of reactants and products.
This question must be solved using both stoichiometry and the gas laws
The reaction equation is;
2 Al(s) + 6 HCl(aq) --------> 2 AICI3, (aq) + 3 H2(g)
Using stoichiometryNumber of moles of Al = 3g/27g/mol = 0.11 moles
According to the reaction equation;
2 moles of Al yields 3 moles of H2
0.11 moles of Al yields 0.11 * 3/2 = 0.165 moles
Using the gas lawsFrom the ideal gas equation;
PV=nRT
P = ?
n= 0.165 moles
V = 0.85 L
T = 297 K
R = 0.082 atmLK-1mol-1
P= nRT/V
P = 0.165 * 0.082 * 297/0.85
P= 4.73 atm
Under STP conditions;P1 = 4.73 atm
T1 = 297 K
V1 = 0.85 L
P2 = 1 atm
T2 =273 K
V2 =?
From the general gas equation;P1V1/T1 = P2V2/T2
P1V1T2 = P2V2T1
V2 = P1V1T2/P2T1
V2 = 4.73 * 0.85 * 273/1 * 297
V2 = 3.69 L
P1 = 760 mmHg
T1 = 273 K
V1 = 3.69
P2 = 438 mm Hg
T2 = 284.2 K
V2 =?
P1V1/T1 = P2V2/T2
P1V1T2 = P2V2T1
V2 = P1V1T2/P2T1
V2 = 760 * 3.69 * 284.2/438 *273
V2 = 797010.48/119574
V2= 6.67 L
https://brainly.com/question/1190311
The mass of a container is determined to be 1.2 g. A sample of a compound is transferred to this container, and the mass of the compound plus the container is determined to be 3.06 g. The mass of the compound should be reported as:__.
Answer:
Sorry I don't know what you
According to law of conservation of mass as mass is neither created nor destroyed mass of compound should be reported as 1.86 g that is by subtracting mass of compound from mass of compound and container.
What is law of conservation of mass?According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .
Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.
Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Antoine Lavoisier in the year 1789.
Learn more about law of conservation of mass,here:
https://brainly.com/question/13383562
#SPJ2
Two common methods to generate an aldehyde is by oxidation of an alcohol and through ozonolysis.
a. True
b. False
Answer:
a. True.
Explanation:
Only primary and secondary alcohols can oxidise to give an aldehyde. But a weak oxidizing agent must be used to prevent formation of a carboxylic acid or ketone.
weak oxidizing agents: Chromyl chloride, silver/oxygen/500°C
take an example of ethanol:
[tex]{ \bf{CH _{3} CH_{2}OH \: \: \frac{Ag/O_{2} }{500 \degree C} > \: \:CH _{3} CHO}}[/tex]
[tex]{ \sf{CH _{3} CHO \: \: is \: ethanal}} [/tex]
By ozonolysis:
Here, reactants are Ozone gas, Carbon tetrachloride at a temperature (<20°C), ethanoic acid, zinc and water.
take an example of propanol:
if it undergoes ozonolysis, it gives ethanal and methanal.
Answer:
A. True
Explanation:
Only primary and secondary alcohols can oxidise to give an aldehyde. But a weak oxidizing agent must be used to prevent formation of a carboxylic acid or ketone.
weak oxidizing agents: Chromyl chloride, silver/oxygen/500°C
take an example of ethanol:
By ozonolysis:
Here, reactants are Ozone gas, Carbon tetrachloride at a temperature (<20°C), ethanoic acid, zinc and water.
take an example of propanol:
if it undergoes ozonolysis, it gives ethanal and methanal.
If the balance were not tared prior to weighing out the KHP.... how would you expect this to affect the molarity of NaOH calculated? What type of error is this?
Answer:
Following are the response to the given question:
Explanation:
In the given scenario, When the balance has never been tainted before the KHP is weighted, which can affect the molar concentration of NaOH because its molarity is directly proportional to the weight including its substance. In this question it is the mistake is systemic because it may be corrected by modifying balancing parameters.
When hydrogen gas reacts with oxygen gas, water vapour is formed according to the
reaction 2H2 + O2 2H2O. If 3.00 mol of hydrogen gas react with 3.00 mol
of oxygen gas, which reactant will be the reactant in excess?
Explanation:
here's the answer to the question
Draw a formula for Thr-Gly-Ala (T-G-A) in its predominant ionic form at pH 7.3. You may assume for the purposes of this question that the pKa values of the acidic groups of amino acid residues in the peptide are the same as in the amino acid itself.
Answer:
gggggggggg
Explanation:
gggggggg
The tripeptide formed from threonine, glycine and alanine is neutral at the pH of 7.3. The carboxylic end is negative charged by donating its proton to form the NH₃⁺ group.
What is peptide?Peptides are protein units formed from two or more amino acids bonded through peptide bonds. There are essential and non-essential amino acids. Essential amino acids have to be uptake from food and non-essential amino acids are synthesized inside the body.
Threonine is an essential amino acid with a CH₃CHOH side group. Glycine has the simplest side group hydrogen and alanine has CH₃ side chain. Both glycine and alanine are non-essential amino acids.
Each amino acids are represented with a three letter code or one letter symbol. Thus threonine is T, G for glycine and A for alanine. At a pH of 7.3 the peptide formed from these amino-acids contains a negatively charged carboxylic end.
A positively charged amino end made by protonation from the acid group make the overall charge zero. The structure of the peptide is given in the uploaded image.
To find more about peptides, refer the link below:
https://brainly.com/question/11843803
#SPJ2
Nitric acid can be formed in two steps from the atmospheric gases nitrogen and oxygen, plus hydrogen prepared by reforming natural gas. In the first step, nitrogen and hydrogen react to form ammonia: N2 (g) + 3H2 (g) â 2NH3 (g) =ÎHâ92.kJ In the second step, ammonia and oxygen react to form nitric acid and water:
NH3 (g) + 2O2 (g) â HNO3 (g) + H2O (g) =ÎHâ330.kJ
Required:
Calculate the net change in enthalpy for the formation of one mole of nitric acid from nitrogen, hydrogen and oxygen from these reactions.
Answer:
-376 kJ
Explanation:
The first step equation:
[tex]\mathsf{N_{2(g)} + 3H_2{(g)} \to 2NH_3{(g)} \ \ \ \Delta H = -92\ kJ}[/tex] ---- (1)
The second step equation:
[tex]\mathsf{NH_{3(g)} + 2O_2{(g)} \to HNO_3{(g)} +H_2O_{(g)} \ \ \ \Delta H = -330\ kJ}[/tex] ---- (2)
To determine the enthalpy of formation for 1 mole of HNO₃ (nitric acid), we have the following.
From the above equations; let multiply equation (1) by 1 and equation (2) by 2.
[tex]\mathsf{N_{2(g)} + 3H_2{(g)} \to 2NH_3{(g)} \ \ \ \Delta H = -92\ kJ}[/tex] ---- (3)
[tex]\mathsf{2NH_{3(g)} + 4O_2{(g)} \to 2HNO_3{(g)} +2H_2O_{(g)} \ \ \ \Delta H = 2(-330)\ kJ}[/tex] ----- (4)
adding the above two equations, we have:
[tex]\mathsf{N_{2(g)} + 3H_2{(g)}+ 2NH_{3(g)} + 4O_{2(g)} \to 2HNO_{3(g)} + 2NH_3{(g)} +2H_2O_{(g)} \ \ \ \Delta H = (-660 \ kJ -92\ kJ)}[/tex][tex]\mathsf{N_{2(g)} + 3H_2{(g)} + 4O_{2(g)} \to 2HNO_{3(g)} +2H_2O_{(g)} \ \ \ \Delta H = (-752 \ kJ)}[/tex]
Now, from the recent equation, we have:
2 moles of nitric acid = -752 kJ
∴
1 mole of nitric acid will be: = (1 mole × (-752 kJ)) ÷ 2 moles
1 mole of nitric acid will be: = -376 kJ
A central atom has two lone pairs on opposite sides and four single bonds. What is the molecule geometry of the result?
A. octahedral
B. tetrahedral
C. square planar
D. linear
The correct answer is C. square planar
According to the Valence Shell Electron Pair Repulsion Theory(VSEPR), The shape of a molecule depends on the number of electron pairs in the molecule.
VSEPR theory was first coined by Gillespie and Nyhlom in 1957 as an improvement over the Sidgwick - Powell theory.
According to this theory, the shape of a molecule is determined by the number of electron pairs that surround the valence shell of the central atom in the molecule. The electron pairs are positioned as far apart in space as possible to minimize repulsion of electron pairs.
However, the presence of lone pairs distorts the shape anticipated for the molecule on the basis of VSEPR.
For a molecule having six electron pairs, an octahedral geometry is expected(electron domain geometry). However, the presence of two lone pairs which are positioned at opposite side of the four single bonds leads to an observed square planar molecular geometry.
https://brainly.com/question/13591921
Answer:
square planar
Explanation:
Determine which choice is an example of an endothermic process.
O A. Lighting a match
B. Respiration
C. Running a gas engine
D. Baking bread
Answer:
D. Baking bread
Explanation:
In this process, energy is absorbed and in an endothermic process energy is absorbed too.
Baking bread is an example of an endothermic process, therefore option (d) is correct .
What do you mean by endothermic process ?Endothermic reactions are chemical processes in which the reactants absorb heat from the environment to produce products.
An endothermic reaction is accompanied by an absorption of heat.
Endothermic reactions cause a cooling effect by lowering the temperature of the surrounding environment.
A decrease in temperature can be observed with the progression of the reaction. The reaction is non-spontaneous in endothermic reactions .
Baking bread is an example of an endothermic process, hence option (d) is correct .
Learn more about endothermic process ,here:
https://brainly.com/question/23184814
#SPJ5
Forcus on the yellow highlighted texts, your help is appreciated.
[tex]{ \sf{ \red{no \: pranks}}}[/tex]
Answer:
Transition temperature is the temperature at which a substance changes from one state to another.
Allotropy is the existence of an element in many forms.
Determine the number of moles of aluminum in 2.154 x 10-1 kg of Al. Group of answer choices 5816 mol 7.984 mol 6.02 X 1023 mol 4.801 mol 8.783
Answer:
Avogadro's number is 1 mol = 6.02 * 10^23 elements
It means that 1 mol of atoms is 6.02 * 10^23 atoms
1 mol of atoms = 6.02 * 10^23 atoms
From there, if you divide both sides by 1 mol of atoms, you get
1 = 6.02 * 10^23 atoms / 1 mol of atoms.
That means, that to pass from a number of moles of atoms to number of atoms you have to multipby by the conversion factor
6.02*10^23 atoms Al/ 1 mol Al
That is the second option of the list.
Explanation:
Consider an equilibrium (K1) that is established after 10 mL of compound A and 10 mL of compound B are mixed. Now, imagine the equilibrium (K2) where 1 mL of compound A is added to 100 mL of compound B. How are K1 and K2 related algebraically (read this question VERY carefully, at least one more time)
The equilibrium constant K₁ = Equilbrium constant K₂.
The equilibrium constant, K, of a reaction, is defined as:
"The ratio between concentration of products powered to their reaction quotient and concentration of reactants powered to thier reaction quotient".
For the reaction:
aA + bB ⇄ cC + dD
The equilibrium constant, K, is:
[tex]K = \frac{[C]^c[D]^d}{[A]^a[B]^b}[/tex]
Now, assuming the reaction of the problem is 1:1:
A + B ⇄ C + D
[tex]K = \frac{[C][D]}{[A][B]}[/tex]
The concentrations of the reactants are directly proportional to the volume added. Thus, we can assume that concentration = Volume. Replacing for K₁ and K₂:
[tex]K_1 = \frac{[C][D]}{[10mL][10mL]} = K_1 = \frac{[C][D]}{100mL^2}[/tex]
In the same way:
[tex]K_2 = \frac{[C][D]}{[1mL][100mL]} = K_2 = \frac{[C][D]}{100mL^2}[/tex]
Thus, we can say:
K₁ = K₂Learn more about chemical equilibrium in:
https://brainly.com/question/4289021?referrer=searchResults
At what velocity (m/s) must a 20.0g object be moving in order to possess a kinetic energy of 1.00J
Answer:
10 ms-1
Explanation:
Kinetic energy = 1/2 × m × v^2
1 = 1/2× 20 ×10^ -3 × v^2
v ^ 2 = 100
v = 10 ms-1
note : convert grams in to kg before substitution as above
Given:
Kinetic energy,
K.E = 1.00 JMass,
m = 20.0 gWe know the formula,
→ [tex]K.E = \frac{1}{2} mv^2[/tex]
By putting the values, we get
[tex]1 = \frac{1}{2}\times 20\times 10^{-3}\times (v)^2[/tex]
[tex]v^2 = 100[/tex]
[tex]v = \sqrt{100}[/tex]
[tex]v = 10 \ m/s[/tex]
Thus the above response is correct.
Learn more about K.E here:
https://brainly.com/question/24997625
Consider the reaction: A(aq) + 2B (aq) === C (aq). Initially 1.00 mol A and 1.80 mol B
were placed in a 5.00-liter container. The mole of B at equilibrium was determined to
be 1.00 mol. Calculate K value.
0.060
5.1
25
17
Ugh
Answer:
17
Explanation:
Step 1: Calculate the needed concentrations
[A]i = 1.00 mol/5.00 L = 0.200 M
[B]i = 1.80 mol/5.00 L = 0.360 M
[B]e = 1.00 mol/5.00 L = 0.200 M
Step 2: Make an ICE chart
A(aq) + 2 B(aq) ⇄ C(aq)
I 0.200 0.360 0
C -x -2x +x
E 0.200-x 0.360-2x x
Then,
[B]e = 0.360-2x = 0.200
x = 0.0800
The concentrations at equilibrium are:
[A]e = 0.200-0.0800 = 0.120 M
[B]e = 0.200 M
[C]e = 0.0800 M
Step 3: Calculate the concentration equilibrium constant (K)
K = [C] / [A] × [B]²
K = 0.0800 / 0.120 × 0.200² = 16.6 ≈ 17
The elementary reaction 2H2O(g)↽−−⇀2H2(g)+O2(g) proceeds at a certain temperature until the partial pressures of H2O, H2, and O2 reach 0.0900 bar , 0.00100 bar , and 0.00350 bar respectively. What is the value of the equilibrium constant at this temperature?
Answer:
3.89 ×10^-5
Explanation:
Since they are gaseous reactants, we obtain the equilibrium constant from the given partial pressures;
p(H2O) = 0.0900 bar
p(H2) = 0.00100 bar
p(O2) = 0.00350 bar
The equation of the reaction is;2H2O(g)⇄2H2(g)+O2(g)
Kp= p(H2) . p(O2)/p(H2O)
Kp= 0.00100 × 0.00350/0.0900
Kp= 3.89 ×10^-5
In the reaction HCI + NH4OH --> NH4CI+H2O, which compound has an element ratio of 1:4:1?
H2O
NH4Cl
HCI
ΝΗ4ΟΗ
The compound in this reaction which is having the elemental ratio of 1:4:1 is NH₄Cl where nitrogen and chlorine are of one mole each with 4 hydrogens.
What is elemental ratio?Elemental ratio of a compound is the ratio of number of atoms of each elements in that compound. The elemental ratio can be determined from the molecular formula of compounds.
The given reaction is a double displacement reaction. Here, the Cl group is replaced to the ammonia and OH group is replaced to the water. Thus, two species is replaced in the reaction.
In NH₄Cl, there are one nitrogen, 4 hydrogens and one chlorine atom. Therefore, the elemental ratio of the compound is 1:4:1. The elemental ratio of water is 2:1 and HCl is 1:1 and that in NH₄OH is 1:5:1. Hence, option b is correct.
To find more on elemental ratio, refer here:
https://brainly.com/question/17613193
#SPJ2
The freezing point of a substance is -20°C. Its boiling point is 120°C.
a. At 80°C the substance is in the state
b. At -50°C the substance is in the state.
C. At 140°C the substance is in the state.
Answer:
a. liquid
b. solid
c. gas, (should be at it's boiling point)
Explanation: If the normal melting point of a substance is below room temperature, the substance is a liquid at room temperature. Benzene melts at 6°C and boils at 80°C; it is a liquid at room temperature. If both the normal melting point and the normal boiling point are above room temperature, the substance is a solid.
if you need an explanation to each lmk
ort
Which is a primary alcohol?
0 3-pentanol
2-propanol
1-ethanol
4-octanol
urvey
Lig A Moving to another question will save this response.
Answer:
1 ethanol is right answer
Explanation:
CH3- CH2-OH
Write balanced equations for the reaction of each of the following carboxylic acids with NaOH. Part A formic acid Express your answer as a chemical equation. A chemical reaction does not occur for this question. Request Answer Part B 3-chloropropanoic acid Express your answer as a chemical equation. nothing A chemical reaction does not occur for this question.
Answer:
Part A
HCOOH(aq) + NaOH(aq) → HCOONa(aq) + H2O(l)
Part B
ClCH2CH2CO2H(aq) + NaOH(aq) ------> ClCH2CH2CO2Na(aq) + H2O(l)
Explanation:
The reaction between an alkanoic acid and a base is a neutralization reaction. The reaction occurs as follows;
RCOOH + NaOH ----> RCOONa + H2O
We have to note the fact that the net ionic reaction still remains;
H^+(aq) + OH^-(aq) ---> H2O(l)
In both cases, the reaction can occur and they actually do occur as written.
A nuclease enzyme breaks the covalent bond originally connecting the phosphate to the 5' carbon in a nucleic acid. After allowing this enzyme to completely digest the nucleic acid down to monomers, you perform tests to determine where the phosphate is attached to each monomer. Where do you expect to find this phosphate
Answer:
The phosphate will remain attached to the 5' carbon of the deoxy or the ribose sugar in the nucleic acid monomers.
Explanation:
The structure of nucleic acid polymers is built up from monomers of nucleotides.
A nucleotide consists of a sugar backbone which is either a ribose or deoxyribose sugar, a nitogenous base which is either a purine or pyrimidine, and a phosphate group. The nitrogenous base is attached to the carbon number 1 or C-1 of the sugar backbone by a covalent bond. The phosphate group on the other hand is covalently attached to the carbon number 5 or 5' carbon of the sugar backbone.
When polymers of nucleic acids are formed, the phosphate at the 5' carbon of the sugar backbone is covalently linked in a phosphodiester bond to the 3' carbon of the sugar backbone in another nucleotide molecule, thus extending the strands of the nucleic acid molecule.
Nucleases are enzymes that break down the phosphodiseter bonds in nucleic acids resulting in nucleotide monomers. After complete digestion ofmthe nucleic acid polymer by nucleases, the phosphate will remain attached to the 5' carbon of the deoxy or the ribose sugar in the nucleic acid monomers.
In practice, the second law of thermodynamics means that:
a. Systems move from ordered behavior to more random behavior.
b. Systems move from random behavior to more ordered behavior.
c. Systems move between ordered and random behavior patterns based on temperature.
d. Systems are constantly striving to reach equilibrium.
Answer:
Systems move from ordered behavior to more random behavior.
Explanation:
Entropy refers to the degree of disorderliness in a system. The second law of thermodynamics can be restated in terms of entropy as follows; “any spontaneous process in any isolated system always results in an increase in the entropy of that system.''(science direct)
According to this law, systems tend towards a more disorderly behaviour (increase in entropy) hence the answer given above.
what is the bond energy required to break one mole of carbon-carbon bonds
Answer:
100 kcal of bond energy
2. An ion is a charged particle that is formed when
a. An atom gains electrons
b. An atom loses electrons
c. Both A and B
d. None of the above
The correct answer is option c. Both A and B: An ion is a charged particle that is formed when an atom gains electrons or an atom loses electrons.
First you need to know the definition of ion. An ion is a molecule or atom that has a positive or negative electrical charge.
That is, an ion is an atom whose electric charge is not neutral. This charged particle can be positive or negative.
Ionization is the chemical or physical process by which ions are produced. In this process, negatively charged ions are produced by gaining electrons and are known as anions.
The positively charged are produced by the loss of electrons and are known as cations.
In summary, an ion is a charged particle that is formed when an atom gains electrons or an atom loses electrons, and they are known as cations and anions respectively.
The correct answer is both A and B.
Learn more about ions:
https://brainly.com/question/13692734?referrer=searchResults
How many grams of H₂SO₄ are contained in 2.00 L of 6.0 M H₂SO₄?
Please explain and show work.
Answer:
1176 grams
Explanation:
nH2SO4 =2*6=12 mol
mH2SO4=12*98=1176 grams
Answer:
solution given:
molarity of H₂SO₄=6 M
volume=2L
no of mole =6M*2=12mole
we have
mass =mole* actual mass=12*98=1176g
the mass is 1176g.
How did Kepler's discoveries contribute to astronomy?
O They supported the heliocentric model.
O They established the laws of planetary motion.
O They explained how the Sun rises and sets.
O They made astronomy accessible to people who spoke Italian.
They made astronomy accessible to people who spoke italian
Answer:
"They established the laws of planetary motion"
Explanation:
Mr. Kepler was the astronomer who came up with the "Laws of Planetary Motion."
Which of the following best describes physical science?
0...
OA.
the study of motion
OB.
the study of matter and energy
O C.
the study of Earth's structure and processes
OD.
the study of reactions
O E.
the study of living things
Reset
Ne
B. The study of matter and energy.
Because physical science is everything that doesn't include organic things.
The study of matter and energy among the following best describes physical science.
What is matter?
Matter in chemistry, is defined as any kind of substance that has mass and occupies space that means it possess volume .Matter is composed up of atoms which may or not be of same type.
Atoms are further made up of sub atomic particles which are the protons ,neutrons and the electrons .The matter can exist in various states of substances such as solids, liquids and gases depending on the conditions of the temperature and the pressure.
The states of matter are inter convertible into each other by changing the parameters of temperature and pressure.Matter is always conserved by law of conservation of matter.The law was proposed by Antoine Lavoisier.
Learn more about matter,here:
https://brainly.com/question/9477180
#SPJ7
PLEASE HELP ASAP!!!
Answer:
I don't know What can I do.
In the graphic, 195 represents the _______.
195 Pt
78
A. Atomic Mass
B. Atomic Number
C. Neutron Number
Answer:
ITS ANSWER IS
OPTION B. ATOMIC NUMBER
HI HAVE A NICE DAY
a. You have a stock solution of 14.8 M NH3. How many milliliters of this solution should you dilute to make 1000.0 mL of 0.250 M NH3?
b. If you take a 10.0 mL portion of the stock solution and dilute it to a total volume of 0.500 L, what will be the concentration of the final solution?
Answer:A) V = 16.892 ml
Explanation:
M1 * V1 = M2 * V2
14.8 M * V1 =0.250 M * 1000 ml
V1 = 16.892 ml
a. The volume of 16.89 milliliters of the stock solution of 14.8 M should be diluted to make 1000.0 mL of 0.250 M.
b. The concentration of the final solution is 0.296 M.
What is the dilution law?The concentration or the volume of the concentrated or dilute solution can be calculated by using the equation:
M₁V₁ = M₂V₂
where M₁ and V₁ are the concentration and volume of the concentrated solution respectively and M₂ and V₂ are the concentration and volume of the dilute solution.
A stock solution is a solution that has a high concentration and that will be diluted to a low concentration by the addition of water in it.
Given, a stock solution of concentration, M₁ = 14.8 M
The concentration of the diluted solution, M₂ = 0.250 M
The volume of diluted solution, V₂ = 1000ml
Substitute the value of the molarity and volume in equation (1):
(14.8)× (V₁) = (1000) × (0.250)
V₁ = 16.89 ml
Similarly, for part (b): M₁ = 14.8 M, V₁ = 10 ml and V₂ = 0.5L = 500 ml
(14.8)× (10) = (500) × (M₂)
M₂ = 0.296 M
Learn more about dilution law, here:
https://brainly.com/question/15718488
#SPJ5
