true or false: when multiplying and dividing measurements, to determine the correct level of uncertainty of the solution i use measurement that is uncertain in the largest decimal place.

Answer:

To use an area model to determine the quotient of 556 and 16, we can divide a rectangle of area 556 into 16 equal parts. Each part will have an area of 556/16.

We can start by dividing 556 into 16 groups of 10 (160), and then into 16 groups of 3 (48). That leaves us with a remainder of 4.

So we have:

556 = 16 x 34 + 48 + 4

This shows that 556 can be written as 16 times some whole number (34) plus a remainder of 48 + 4/16.

Simplifying the remainder, we have:

48 + 4/16 = 48 + 1/4 = 48.25

Therefore, the quotient of 556 and 16 is:

556/16 = 34 1/4

The quotient of 556 and 16 using an area model can be determined by producing a rectangle with the total area of 556 and one side of 16. The length of the other side will be the quotient. In this case, the quotient is 34 3/4.

When asked to determine the quotient of 556 and 16 using the area model, one way to think of this is making a rectangle. The total area is 556 and one side is 16. The length of the other side will be the quotient.

Start by first estimating how many times 16 could fit into 556. Let's take 30 as an estimate, because 30*16 = 480, which is relatively close to 556. Draw a rectangle with the width of 16 and the length of 30.

Find the difference between the rectangle's area and 556. So, 556 - 480 = 76. Now, 76 is our remaining area to fill. 16 goes into 76 four more times, adding up to 64.

There is still a leftover area, which is 76-64 = 12. This is smaller than our width of 16. So, your final answer is 34 12/16 or 34 3/4 in simplest form.

https://brainly.com/question/18472914

#SPJ2

4x - 4/4x² + x is the value of linear equation.

What in mathematics is a linear equation?

A linear equation is an algebraic equation of the form y=mx+b, where m is the slope and b is the y-intercept, and only a constant and a first-order (linear) term are included. The variables in the previous sentence, y and x, are referred to as a "linear equation with two variables" at times.  

                                   Equations with power 1 variables are known as linear equations. One example with only one variable is where ax+b = 0, where a and b are real values and x is the variable.

28x³ - 28x²/28x⁴ + 7x³

= 28x²( x - 1 )/7x³( 4x + 1)

= 4( x - 1)/x( 4x + 1)

= 4x - 4/4x² + x

Learn more about linear equation

brainly.com/question/11897796

#SPJ1

The Stevia is a low-calorie alternative to sugar and is a good option for people who are trying to reduce their sugar intake.

Sweet 'n Low - Modified SugarSweet 'n Low is an artificial sweetener that is made from modified sugar. Sweet 'n Low is not as sweet as some other artificial sweeteners like Splenda and Truvia. However, Sweet 'n Low is still used in many products like gum, candy, and other sweet treats. Sweet 'n Low has been around since the 1950s and is still used today as a low-calorie alternative to sugar.Splenda - 600 times sweeter than sugarSplenda is a popular artificial sweetener that is around 600 times sweeter than sugar. Splenda is often used in diet drinks, desserts, and other sweet products. Splenda is made from sugar but is modified to be much sweeter. Splenda is a low-calorie alternative to sugar and can be used by people who are trying to reduce their sugar intake.Stevia - Made from the Stevia PlantStevia is an artificial sweetener that is made from the Stevia plant. Stevia is a natural sweetener and is often used in tea and other drinks. Stevia is not as sweet as some other artificial sweeteners, but it is still a popular alternative to sugar. Stevia is also used in some foods and desserts. Stevia is a low-calorie alternative to sugar and is a good option for people who are trying to reduce their sugar intake.

Learn more about Alternative

brainly.com/question/19718027

#SPJ11

Answer: $22.50

Step-by-step explanation:

Let x be the cost per pound of the secret-formula coffee beans.

The total cost of the secret-formula beans is 12x dollars.

The total cost of the other beans is 15 × 18 = 270 dollars.

The total cost of the mix is (12 + 15) × 20 = 540 dollars.

Since the barista mixed 12 pounds of the secret-formula beans with 15 pounds of the other beans, the total weight of the mix is 12 + 15 = 27 pounds.

We can set up an equation based on the total cost of the mix:

12x + 270 = 540

Subtracting 270 from both sides:

12x = 270

Dividing both sides by 12:

x = 22.5

Therefore, the barista's secret-formula coffee beans cost $22.50 per pound.

Solve the equation [tex]7/11=18/x+1[/tex] we find the solution is [tex]x = 27.2857[/tex]

Your example is an equation since an equation is any statement with an equals sign. Equations are frequently utilized for mathematical equations since mathematicians like equal signs. A set of instructions for achieving a certain result is called an equation.

A number, a constant, or a mix of numbers, variables, and operation symbols make up an expression. Two expressions joined by such an assignment operator form an equation.

we can cross-multiply,

[tex]7(x+1) = 11(18)[/tex]

Expanding the left side,

[tex]7x + 7 = 198[/tex]

Subtracting [tex]7[/tex] from both sides,

[tex]7x = 191[/tex]

Dividing both sides by [tex]7[/tex],

[tex]x = 191/7[/tex]

Therefore, the solution to the proportion is

[tex]x = 27.2857[/tex]

To know more about equation visit:

https://brainly.com/question/10413253

#SPJ1

The Midpoint is the middle- point of the line member. The midpoint connecting two sides of a triangle is resemblant to the third side and half as long.

The midpoint is the middle of the line member. It's equidistant from both endpoints and is the centroid of the member and endpoints. Cut a member in two.

The midpoint theorem states that a line member drawn from the midpoint of two sides of a triangle is resemblant to the third side and half the length of the third side of the triangle.

The mean theorem helps us find the missing values for the sides of triangles. Connects the sides of a triangle with a line member drawn from the midpoints of two sides of the triangle.

To know more about Mid-point,

brainly.com/question/28443113

#SPJ4

There are no fallacies of relevance committed by the given argument.

The following arguments commits fallacy: argumentum ad baculum. Argumentum ad baculum is a Latin phrase which means argument from a stick or appeal to force. It is a type of logical fallacy in which someone tries to persuade another person by using threats of force or coercion rather than using evidence or reasoning.

The above statement is an example of the argumentum ad baculum fallacy as it tries to use fear to convince people to join their protective organization. They are using the threat of potential losses to convince people to join. It is a manipulative strategy that attempts to scare people into joining by threatening the safety of their business.No fallacy is committed. There are no fallacies of relevance committed by the given argument.

Learn more about Fallacies

brainly.com/question/14669739

#SPJ11

To perform matrix multiplication in MIPS, we can use nested loops to iterate over the rows and columns of the matrices.

The outer loop iterates over the rows of the first matrix, while the inner loop iterates over the columns of the second matrix. We then perform the dot product of the corresponding row and column, which involves multiplying the elements and summing the products.

To perform multiplication efficiently, we can use MIPS registers to store intermediate values and avoid accessing memory unnecessarily. We can also use assembly instructions like "lw" and "sw" to load and store values from memory, and "add" and "mul" to perform arithmetic operations.

In summary, matrix multiplication in MIPS involves nested loops, efficient use of registers and assembly instructions, and arithmetic operations.

For more questions like MIPS click the link below:

https://brainly.com/question/4196231

#SPJ11

a) With the following probability table F F, Let’s apply the formula for the intersection of events to solve the first part of the problem.

P(EF) = P(E) x P(F|E).We know that P(E) = 0.1 and that P(F|E) = 0.3. Therefore,P(EF) = P(E) x P(F|E) = 0.1 x 0.3 = 0.03.b) Two events E and F are independent if and only if their intersection is equal to the product of their individual probabilities.

P(EF) = P(E) x P(F) if and only if E and F are independent. We know that P(E) = 0.1 and that P(F) = 0.1 + 0.3 = 0.4. Therefore, P(EF) = 0.03, which is different from 0.1 x 0.4 = 0.04.

Since P(EF) is different from P(E) x P(F), it means that E and F are not independent.c) Two events E and F are mutually exclusive if and only if their intersection is the null set.P(EF) = ∅ if and only if E and F are mutually exclusive. We know that P(EF) = 0.03, which is not equal to the null set. Therefore, E and F are not mutually exclusive.

Learn more about probablity:

https://brainly.com/question/24756209

#SPJ11

Answer:

- 1 and 7

Step-by-step explanation:

to find h(0) substitute x = 0 into h(x)

h(0) = 4(0) - 1 = 0 - 1 = - 1

to find h2) substitute x = 2 into h(x)

h(2) = 4(2) - 1 = 8 - 1 = 7

Answer:

P = [tex]2y^{2}[/tex] + 4xy +4

Q = [tex]-3y^{2}[/tex] + 7 -3xy

R = -3xy +8

Step-by-step explanation:

Keenan's z-score is 0.71, rounded to the nearest hundredth.

The z-score measures how many standard deviations an individual's score is from the mean, and can be calculated using the formula:

z = (x - μ) / σ

where x is the individual's score, μ is the mean score, and σ is the standard deviation.

For Keenan's exam:

z = (80 - 77) / 4.2

z = 0.71

Therefore, Keenan's z-score is 0.71, rounded to the nearest hundredth.

Rounding to the nearest hundredth means the rounding of any decimal number to its nearest hundredth value. In decimal, hundredth means 1/100 or 0.01. For example, the rounding of 2.167 to its nearest hundredth is 2.17.

To know more about nearest hundredth, visit: brainly.com/question/809709

#SPJ4

By answering the presented question, we may conclude that So, the Pythagorean theorem length of MN is expressed in terms of a and b.

Its Pythagorean theorem is just a fundamental mathematical principle that explains the connection between the sides of a triangle that is right. It asserts that the sum of the squares of both the widths of the other two sides is a square of both the width of the hypotenuse (the side facing the perfect angle) the side opposite the right angle). The mathematical mathematics is as follows: c2 = a2 + b2 At which "c" indicates the length of the right triangle and "a" and "b" reflect the extents of the additional two sides, started referring to as the legs.

Because M is the midpoint of OE and N is the midpoint of AB, we can draw a line segment connecting M and N that is parallel to OB and AE and perpendicular to AB.

the Pythagorean theorem

[tex]OE² = OX² + XE²OE²[/tex]

[tex](a + b/2)² + (2a - b/√3)²OE² = 7a²/4 + 3ab/2 + b²/4AN²[/tex]

[tex]AE² + EN²AN² = (2a√3)² + (b/2)²AN²[/tex]

[tex]12a² + b²/4MN² = AN² + AM²MN² \\\\ 12a² + b²/4 + (7a²/4 + 3ab/2 + b²/4)MN²\\\\19a²/2 + 3ab/2 + b²/2MN = √(19a²/2 + 3ab/2 + b²/2)[/tex]

So, the length of MN is expressed in terms of a and b.

To know more about Pythagorean theorem visit:

brainly.com/question/14930619

#SPJ1

A bin can hold 28 pounds. each toy car weighs 7 ounces., so the bin can hold 64 toy cars.

To determine the number of toy cars the bin can hold, we must first convert the weight limit of the bin and the weight of the toy cars to a uniform unit of measure.

We'll then divide the weight limit of the bin by the weight of one toy car. After that, we'll multiply the resulting value by the number of ounces in one pound (16).

Here's how to solve the problem:

1 pound = 16 ounces

Therefore, a bin that can hold 28 pounds can hold:28 × 16 = 448 Ounces

The weight of one toy car is 7 ounces.

Divide the weight limit of the bin (448 ounces) by the weight of one toy car (7 ounces):

448 ÷ 7 = 64

Therefore, the bin can hold 64 toy cars.

Learn more about weight limit at

https://brainly.com/question/14375094

#SPJ11

a) P-value = P(z<1.47) = 0.9292.

b) P-value = P(z>2.70) = 0.0036.

c) P-value = 2 × P(z>2.70) = 0.0072.

d) P-value = P(z>2.5) = 0.0062.

Z-test is a statistical test for the null hypothesis, which refers to the population mean, where the population standard deviation is known. P-value represents the probability value for any hypothesis, where a small p-value indicates that the null hypothesis is less accurate.

P-value, for the given values of z-test is calculated as follows: a) For ha: p < .6, z=1.47The p-value for this hypothesis test is calculated as follows: P-value = P(z<1.47) = 0.9292. Therefore, the P-value is 0.9292. b) For ha: p > .6, z=2.70The p-value for this hypothesis test is calculated as follows.

P-value = P(z>2.70) = 0.0036. Therefore, the P-value is 0.0036.c) For ha: p ≠ .6, z=2.70The p-value for this hypothesis test is calculated as follows: P-value = 2 × P(z>2.70) = 0.0072.

Therefore, the P-value is 0.0072.d) For ha: p > .6, z=2.5The p-value for this hypothesis test is calculated as follows: P-value = P(z>2.5) = 0.0062. Therefore, the P-value is 0.0062.

Learn more about Z Test

brainly.com/question/15683598

#SPJ11

Answer:

To find the point that partitions the line segment AB in a ratio of 1:3, we can use the following formula:

P = (3B + 1A) / 4

where P is the point that partitions the line segment in a ratio of 1:3, A and B are the endpoints of the line segment, and the coefficients 3 and 1 represent the ratio of the segment we are dividing.

Substituting the values, we get:

P = (3*(-1, -5) + 1*(-5, 3)) / 4

P = (-3, -7)

Therefore, the point that partitions the line segment AB in a ratio of 1:3 is (-3, -7).

Step-by-step explanation:

Answer:

The 2nd equation is false.

Step-by-step explanation:

You don't even have to solve. DE is not 58, it's 40.

The 2nd equation is false.

the triangles are similar, corresponding parts of the triangles are equal in measure. Thus, it is reasonable to conclude that [tex]AB ≅ DE.[/tex]

It is reasonable to conclude that [tex]AB ≅ DE[/tex]because triangles ABC and DEF are similar.

This means that corresponding parts of the two triangles are equal in measure. Specifically, ∠A and ∠D are equal in measure, as are ∠B and ∠E.

Therefore, the corresponding sides AB and DE are equal in measure.

A way to show that the two triangles are similar is by using the AA Similarity Postulate.

This postulate states that if two angles of one triangle are equal in measure to two angles of a second triangle, then the two triangles are similar. In this case, [tex]∠A ≅ ∠D and B ≅ ∠E[/tex], which means the two triangles are similar.

for such questions on triangles

https://brainly.com/question/17335144

#SPJ11

Answer:

  10.309 in²/s

Step-by-step explanation:

Given A³ = 36πV² and V' = 18 in³/s, you want to know A' when A=153.24 in² and V=178.37 in³.

Using implicit differentiation, we have ...

  3A²·A' = 36π·2V·V'

  A' = (36π·2)/3·V/A²·V' = 24πV/A²·V'

  A' = 24π·(178.37 in²/(153.24 in²)²·18 in³/s

  A' ≈ 10.309 in²/s

The surface area is increasing at about 10.309 square inches per second.

__

Additional comment

There are at least a couple of ways a calculator can be used to find the rate of change. The first attachment shows evaluation of the expression we derived above. The second attachment shows the rate of change when the area is expressed as a function of the volume.

The result rounded to 5 significant figures is the same for both approaches.

The pοint that satisfies bοth inequalities is the pοint inside this triangular regiοn.

An inequality is a mathematical statement that cοmpares twο values οr expressiοns and indicates whether they are equal οr nοt, οr which οne is greater οr smaller.

Since the shading is nοt included, we will need tο use the lines themselves tο determine the cοrrect regiοn οf the cοοrdinate plane.

The first inequality y > (3/2)x - 5 has a slοpe οf 3/2 and a y-intercept οf -5. This means the line will have a pοsitive slοpe and will be lοcated belοw the pοint (0,-5).

The secοnd inequality y < (-1/6)x - 6 has a negative slοpe οf -1/6 and a y-intercept οf -6. This means the line will have a negative slοpe and will be lοcated abοve the pοint (0,-6).

Tο find the pοint that satisfies BOTH inequalities, we need tο lοοk fοr the regiοn οf the cοοrdinate plane that is belοw the line y = (3/2)x - 5 AND abοve the line y = (-1/6)x - 6. This regiοn is the triangular-shaped area that is bοunded by the twο lines and the x-axis.

The pοint that satisfies bοth inequalities is the pοint inside this triangular regiοn.

To know more about inequalities visit:

brainly.com/question/30797813

#SPJ1

Answer:

If the GM between √2 and 2√2 is a find the value of a.​

Step-by-step explanation:

To find the geometric mean between two numbers, we simply take the square root of their product.

In this case, we want to find the geometric mean between √2 and 2√2.

Their product is:

√2 * 2√2 = 2√4 = 2*2 = 4

So, the geometric mean between √2 and 2√2 is the square root of 4, which is:

√4 = 2

Therefore, the value of a is 2.

Answer:

C = 21,309.4

Step-by-step explanation:

Diameter of moon is miles is,

d = 2159.8 miles

We have,

The circumference of the moon is, 6783 miles

Since, We know that,

the circumference of circle is,

C = 2πr

Substitute given values,

6783 miles = 2 × 3.14 × r

6783 = 6.28 × r

r = 6783 / 6.28

r = 1079.9 miles

Therefore, Diameter of moon is miles is,

d = 2 x r

d = 2 x 1079.9

d = 2159.8 miles

Learn more about the circle visit:

https://brainly.com/question/24810873

#SPJ6

In Bitcoin, when a merchant waits for n confirmation of a payment transaction before providing the product, there is a risk of a double-spend attack. In this situation, the network is aware of a branch crediting the merchant, which has n blocks on top of the one in which the fork started.

      By simulating m as a negative binomial variable, P(m) = (m + n - 1m)pnqm can be used to more precisely compute this probability for a given value of m.

           The attacker, on the other hand, has a branch with only m additional blocks. If we assume the honest network and the attacker have a proportion of p and q of the total network hash power, respectively, the probability of the attacker catching up when he is currently z blocks behind is given by az = paz+1 + qaz−1, where a is a constant.

          To calculate the probability more accurately, we can model m as a negative binomial variable.

          This is the number of successes (blocks found by the attacker) before n failures (blocks found by the honest network), with a probability q of success.

          The probability for a given value m is then given by P(m) = (m + n - 1m)pnqm.

         Thus, when dealing with a double-spend attack in Bitcoin, the probability that the attacker will be able to catch up is given by az = paz+1 + qaz−1, where a is a constant.

              This probability can be more accurately calculated by modeling m as a negative binomial variable, with the probability for a given value m given by P(m) = (m + n - 1m)pnqm.

Learn more about Bitcoin merchant transaction probability at: https://brainly.com/question/29435409

#SPJ11

Answer:

[tex]{ \rm{s = 12( v_{0} + v_{1} )t}} \\ \\{ \boxed { \rm{t = \frac{s}{12(v_{0} + v_{1})} \: \: }}}[/tex]

There are several predictions that the food service manager may make based on the data from the survey of 200 students regarding their preference for new lunch menu items. Let's examine some of these predictions and see if they are supported by the data.

The majority of students will like the new menu items.

The food service manager may predict that the majority of students in the school will like the new menu items, based on the positive responses from the 200 surveyed students. However, it's important to note that the sample size of 200 is relatively small compared to the total student population of 1,500. Therefore, it's possible that the preferences of the 200 surveyed students may not be representative of the preferences of the entire student population. To make a more accurate prediction, the manager may need to conduct a larger survey or pilot program to test the new menu items with a larger group of students.

Certain menu items will be more popular than others.

Based on the survey data, the food service manager may be able to identify which new menu items are more popular among the surveyed students. For example, if a majority of students indicate that they would like to see more vegetarian options, the manager may predict that introducing more vegetarian menu items will be popular among the broader student population. However, it's important to keep in mind that the preferences of the 200 surveyed students may not be representative of the preferences of the entire student population, so the manager may need to conduct additional research or testing to confirm these predictions.

The introduction of new menu items will increase overall satisfaction with the school lunch program.

If the survey data shows that a significant number of students are excited about the new menu items, the food service manager may predict that introducing these items will increase overall satisfaction with the school lunch program. However, it's important to note that satisfaction is a complex concept that can be influenced by many factors beyond just the menu items, such as the quality of service, cleanliness of the cafeteria, and overall atmosphere. Therefore, the manager may need to consider these other factors when predicting the impact of the new menu items on overall satisfaction with the lunch program.

In summary, while the data from the survey of 200 students can provide valuable insights into student preferences for new lunch menu items, it's important to interpret these results with caution and consider additional factors that may influence the broader student population. Conducting further research or testing can help to confirm these predictions and make more accurate decisions about the school lunch program.

To know more about  larger click here:

brainly.com/question/25009162

#SPJ4

Answer:

To find out how much Gary's backpack will weigh with the math and science textbooks in it, we need to add the weight of the textbooks to the weight of the backpack:

Total weight = backpack weight + math textbook weight + science textbook weight

Total weight = 1.2 + 3.75 + 2.85

Total weight = 7.8 pounds

Therefore, Gary's backpack will weigh 7.8 pounds with the math and science textbooks in it.

Answer: His backpack will weigh 7.8 pounds

Step-by-step explanation:

Gary's backpack already weights 1.2 pounds without the science and math textbook, now we add the weights of both the math and science textbook.

1.2 + 3.75 = 4.95

4.95 is the weight with only his math textbook in his bag

now we add the science textbooks weight to 4.95

4.95 + 2.85 = 7.8

7.8 is the weight of his backpack with both his science and math textbook in his bag

The correct answer is option (C).

Sine (sin), cosine (cos), tangent (tan), cosecant (csc), secant (sec), and cotangent are the six functions (cot).

The equation t = Q - P, where Q and P are the specified locations, can be used to determine the components of the vector t. Therefore:

t = (–18, 2) – (–13, 11) = (–18 + 13, 2 – 11) = (–5, –9) (–5, –9)

The vector's magnitude is given by:

|t| = √(–5)^2 + (–9)^2 = √106 ≈ 10.296

The formula = tan1 (y/x), where x and y are the vector's components, can be used to determine the direction of the vector t. The direction must be expressed in terms of sine and cosine functions because we are required to represent the vector in trigonometric form.

θ = tan⁻¹ (–9/–5) ≈ 60.945°

In trigonometric form, the vector t is thus represented as follows:

t = [t|cos|i] + [t|sin|j]

We get the following by altering the values of |t| and:

t = 10.296 cos I + 10.296 sin j of angle 60.945

As a result, the following is the proper trigonometric representation of the vector t:

t = 10.296 cos I + 10.296 sin j of angle 60.945

Thus, alternative is the right response (C).

To know more about Trignometric visit:

https://brainly.com/question/29076920

#SPJ1

The probability of the disk drive being in a normal state is 0.5, and the probability of the disk drive being in a failed state is 0.3.

The given table represents the joint probability mass function of the random variables, pxyc (r, y, c). r, y, and c denote the temperature, shock sensor, and health status of the disk drive. The values of r, y, and c are binary.The joint probability mass function of three random variables r, y, and c can be represented as follows:pxyc (r, y, c)= P(r, y, c)Here,P(r=0, y=0, c=0)= 0.1, P(r=0, y=1, c=0)= 0.2, P(r=1, y=0, c=0)= 0.2,P(r=0, y=0, c=1)= 0, P(r=0, y=1, c=1)= 0, P(r=1, y=0, c=1)= 0,P(r=0, y=0, c=0)= 0, P(r=0, y=1, c=0)= 0, P(r=1, y=1, c=0)= 0.05,P(r=0, y=0, c=1)= 0.25, P(r=0, y=1, c=1)= 0, P(r=1, y=0, c=1)= 0.From the given table, the probability of the disk drive being in a normal state, C=0, is P(C=0)=P(r=0, y=0, c=0)+P(r=0, y=1, c=0)+P(r=1, y=0, c=0)=0.1+0.2+0.2=0.5Hence, the probability of the disk drive being in a failed state, C=1, is:P(C=1)=P(r=0, y=0, c=1)+P(r=0, y=1, c=1)+P(r=1, y=0, c=1)+P(r=1, y=1, c=0)=0.25+0+0+0.05=0.3Therefore, the probability of the disk drive being in a normal state is 0.5, and the probability of the disk drive being in a failed state is 0.3.

Learn more about Probability

brainly.com/question/11234923

#SPJ11

Answer:

142 sq cm

Step-by-step explanation:

A= 2(lh + wh + lw)

2(7*3+5*3+7*5)

2(21+15+35)

2(71)

A= 142 sq cm

Anna should use 10 mL of the 72% salt solution and 20 mL of the 54% salt solution to make 30 mL of a 60% salt solution

Let's assume that Anna will use x mL of the 72% salt solution, and therefore she will use (30 - x) mL of the 54% salt solution (since the total volume is 30 mL).

To find out how much of each solution Anna should use, we can set up an equation based on the amount of salt in each solution.

The amount of salt in x mL of 72% salt solution is

= 0.72x

The amount of salt in (30 - x) mL of 54% salt solution is

= 0.54(30 - x)

To make a 60% salt solution, the total amount of salt in the final solution should be

0.6(30) = 18

So we can set up an equation

0.72x + 0.54(30 - x) = 1

Simplifying the equation

0.72x + 16.2 - 0.54x = 18

0.18x = 1.8

x = 10 ml

Learn more about equation here

brainly.com/question/17156168

#SPJ4