(True or false) The water molecule can be either an acid or a base. Justify.

Answers

Answer 1

Answer:

TRUE!!!!

Explanation:

Water can act as both an acid and a base in solution and undergoes autoionization, where it can be both an acid and a base to itself. When mixed with an acid, water accepts hydrogen ions and acts as a base. However, when water is mixed with a base, it donates hydrogen ions and acts like an acid.

Not my words! I hope this helps :)

Answer 2
The answer is true!!! I’m for sure that’s your answer

Related Questions

When 11.2 liters of hydrogen gas is made by adding zinc to sulfuric acid, what mass
of zinc is needed?
Zn + H2SO4 -> H2 + ZnSO4

Answers

32.7 g Zn

Explanation:

First convert the amount of gas into moles:

11.2 L H2 × (1 mol H2/22.4 L H2) = 0.500 mol H2

Then use the molar ratio to find the amount of zinc necessary to produce the amount of gas above:

0.500 mol H2 × (1 mol Zn/1 mol H2)

= 0.500 mol Zn

Now use the molar mass of zinc to find the number of grams of zinc for the reaction to occur:

0.500 mol Zn × (65.38 g Zn/1 mol Zn)

= 32.7 g Zn

This cell is dividing into two cells.

Answers

Answer:

answer: B or D

Explanation:

hope it helps thanks❤

Two solutions are mixed, bringing together ions of Na+, PO43−, V3+, and Cl−. Use the solubility rules to identify the composition of the salt that precipitates out of the solution.

Answers

What can you conclude about the father based on this passage? Check all that apply.


Pleaseee helpppp.....

Answers

Answer:

C. All of the above

Explanation:

They all happen beyond critical point.

12. Which nonmetal is the most reactive?
A bromine
B
iodine
C) fluorine
D) chlorine

Answers

Answer:

C Fluorine

Explanation:

C fluorine is the answer

What is the amount of heat, in joules, required to increase the temperature of a 49.5-gram sample of water from 22°C to 66°C?

1) 2.2 x 103^3 J
2) 4.6 10^3 J
3) 9.1 x 10^3 J
4) 1.4 x 10^4 J

Answers

Answer:

3) 9.1 x 10^3 J

Explanation:

Which of the following elements is a metalloid (semimetal)?

C
P
Sb
N
In

Answers

Answer:

Sb

Explanation:

Sb (antimony) is an metalloid


4. If the relative molecular mass of CH20 is 60.
calculate its empirical formula. (C = 12. H = 1
0 = 16)
A 4
В І
C2
D 3​

Answers

Answer:

C2H4O2

Explanation:

because you do mr of CH2O= 12+2+16=30

so 60÷30=2 empirical units

so CH2O × 2=C2H4O2

hope this helps :)

The Empirical formula of the given compound is CH₂O

What is Empirical formula ?

A formula giving the proportions of the elements present in a compound but not the actual numbers or arrangement of atoms.

Empirical formula mass  = 12g/mol + 2 g/mol + 16 g/mol = 30 g/mol

Molecular formula mass / Empirical formula mass = 60 g/mol / 30 g/mol

                                                                                   = 2

Molecular formula = 2 × CH₂O = C₂H₄O₂

Empirical formula = CH₂O

Empirical formula mass  = 12g/mol + 2 g/mol + 16 g/mol = 30 g/mol

Therefore, The Empirical formula of the given compound is CH₂O

Learn more about Empirical formula here ;

https://brainly.com/question/27749976

#SPJ2

Consider the following chemical reaction:
HF + NaOH - NaF + H20
Energy must be invested in order for the reaction to proceed.
What bonds must be broken in order for the reaction to proceed.
Select ALL that apply.
A. An ionic bond between sodium and hydroxide.
B. An ionic bond between sodium and fluorine.
C. A covalent bond between sodiume and fluorine.
D. An ionic bond between hydrogen and fluorine.
DE. A covalent bond between hydrogen and fluorine.
DE A covalent bond between hydrogen and oxygen

Answers

Answer: The correct options are A and E

Explanation:

A chemical reaction is defined as the reaction in which two or more chemical substances react to form two or more different chemical substances.

A new substance (product) is formed in a chemical reaction when the bonds between the reactants are broken so that the new bonds between the products can be formed.

For a given chemical reaction:

[tex]HF+NaOH\rightarrow NaF+H_2O[/tex]

Here,

HF is a covalent compound as sharing of electrons take place between hydrogen and fluorine atom

NaOH is an ionic compound as a complete transfer of electrons occurs from sodium to hydroxide.

Thus, to form the products, an ionic bond between sodium and hydroxide must be broken coupled with a covalent bond between hydrogen and fluorine.

Hence, the correct options are A and E

what is the chemical formula : hydrogen and chlorine ?

Answers

Answer:

HCl

Explanation:

HCl
That’s is the formula
I hope this helps

Who is my favourite wrestler?​

Answers

i don’t know:)))))))))))

Answer:

ma herdina thesto wrestling

Q1.what is irragation​

Answers

Answer:

Irrigation is the artificial process of applying controlled amounts of water to land to assist in production of crops. Irrigation helps to grow agricultural crops, maintain landscapes, and revegetate disturbed soils in dry areas and during periods of less than average rainfall.

Answer: The watering of crop plants in regular intervals is known as irrigation. ... Weeds are unwanted plants thet grows with the crop plants. Weeding means to remove those plants. It is done manually or by machine. Using khurpi it is done manually and using seed drill it is done by machine.

Explanation:

Irrigation is the artificial application of water to the soil through various systems of tubes, pumps, and sprays. Irrigation is usually used in areas where rainfall is irregular or dry times or drought is expected.

Hope it helps

ASAP!!!!!!!!!!!!A marble bag contains 10 red marbles, 19 yellow marbles, and 29 green marbles. What is the % composition of each color marble in the bag?

Answers

Answer:

Red: 17.24%

Yellow: 32.76%

Green: 50%

Explanation:

14. Each beaker shown to the right contains iron and an
acid. In which beaker will the iron dissolve the fastest
and why?
a. Beaker A because of a higher concentration level.
b. Beaker A because of increased surface area.
C. Beaker B because of a higher concentration level.
d. Beaker B because of increased surface area.

Answers

The question is incomplete, the complete question is attached in the image below:

Answer: The correct option is D) Beaker B because of the increased surface area.

Explanation:

A solution consists of solute and solvent.

A solute is defined as a component that is present in a smaller proportion while a solvent is defined as a component that is present in a larger proportion.

Solubility is defined as the amount of solute that can be dissolved in a given amount of solvent to form a solution.

Solubility of a substance depends on a few factors:

Surface areaMolecular sizeTemperatureStirring effect

For the given images,

Beaker A has a large block of iron rod and Beaker B has iron shards.

The smaller molecular size of a substance increases its surface area and thus, increases the solubility.

Hence, the correct option is D) Beaker B because of the increased surface area.


How did reducing the number of
decomposers affect the amount of carbon
dioxide in the ecosystem?

Answers

Answer:

As organisms release energy during cellular respiration, carbon dioxide is produced from the carbon in energy storage molecules. ... Carbon dioxide in the biodome decreased because decomposers decreased which means there was a decrease in cellular respiration overall.

btw :

stay safe! :3

why does shampoo remove hair grese for chemistry acids and alkali

Answers

because it’s shampoo

Explain a polar molecules and give examples​

Answers

Ethanol is polar because the oxygen atoms attract electrons because of their higher electronegativity than other atoms in the molecule. Thus the -OH group in ethanol has a slight negative charge. Ammonia (NH3) is polar. Sulfur dioxide (SO2) is polar.

Which of the following is an example of nuclear fission?
A. A gamma emitter is used to trace movement of chemicals in the
environment.
B. A radioactive drug that emits electrons is used to treat cancer in a
patient.
O c. Two different isotopes of hydrogen form an isotope of helium on
the sun.
O D. A large radioactive atom breaks into smaller atoms, producing
nuclear energy.

Answers

The statement which is an example of nuclear fission is that a large radioactive atom breaks into smaller atoms, producing nuclear energy.

What is nuclear fission?

Nuclear fission is a kind of radioactive decay reaction in which an unstable nuclei of an atom will split into smaller stable nuclei by the emission of lots of energy.

Gamma emitter is used inside the human body to trace the information that assists in making a diagnosis by the help of medication.To treat cancer patient high energetic rays like x-rays, gamma-rays are used.Formation of isotope of helium from two different isotopes of hydrogen is an example of nuclear fussion reaction.

Hence in nuclear fission a large radioactive atom breaks into smaller atoms, producing nuclear energy.

To know more about nuclear fission, visit the below link:
https://brainly.com/question/3992688

What force is important in the creation of both coal and petroleum?​

Answers

Explanation:

heat and pressure are two main forces that transform organic matter into fossil fuels

bf3 can be octet or not​

Answers

Answer:

(BH3 follows the octet rule by dimerizing, as Hadi Kurniawan AR pointed out.) For H and He, an "octet" = 2 electrons. Boron does prefer to follow the octet rule, in that it likes to form borate compounds such as NaBH4. It also is happy to form compounds with elements with lone pairs.

A 13 Ohm resistor, R, is connected to a battery with unknown voltage, V, as shown below. The total current, I, flowing through the circuit is 1.24 Amperes. Find the unknown voltage, V, of the battery in Volts. Round your answer to 2 decimal places

Answers

Answer:

16.12 V

Explanation:

Ohms law explains or portrays the relationship between the voltage (V), current (I) and resistance (R). This is represented using the equation as follows:

V = IR

Where;

V = voltage (Volts)

I = current (amperes)

R = resistance (ohms)

According to the information provided in the question, resistance (R) = 13 Ohm, current (I) = 1.24 Amperes, V = ?

V = 13 × 1.24

V = 16.12 V

Determine the number of subatomic particles in bromine-35.

Answers

Number of subatomic particles=35+36+35=106

Explanation:

Atomic number=35

Mass number=71

No. of proton p=35

No. of neutron n=71−35=36

No. of electron e=35

Which value could be the y-coordinate for point Q?
215
42
2/13
8/2

Answers

I think the answer is the first choice

what is periodic law​

Answers

The Periodic Law states that the physical and chemical properties of the elements recur in a systematic and predictable way. When the elements are arranged in order of increasing atomic number. Many of the properties recur at intervals.

Which of the following issues surrounding nuclear power creates the biggest
concern?
A. Where nuclear power should be used
B. How to deal with the radioactive waste
c. How many power plants should be built
O D. What nuclear power should be used for

Answers

Question : Which issue surrounding nuclear power creates the biggest concern?

Answer : How to deal with the radioactive waste (B)

The following issues surrounding nuclear power that create the biggest concern is What nuclear power should be used for?

What is nuclear power?

Nuclear powers are those powers that are produced by nuclear reactions. These reactions include nuclear fission, nuclear fusion, and nuclear decay. Nuclear power is currently in use to produce electricity. The reaction uses uranium and plutonium reaction to produce electricity.

Nuclear power is used for generating electricity, and it is necessary to use the correct radioisotopes to produce electricity.

Thus, the correct option is D. What nuclear power should be used for?

Learn more about nuclear power, here:

https://brainly.com/question/9859575

#SPJ2

28.0 g of N2 gas was found to occupy a volume of 8.44 L at a
pressure of 320 kPa. What is the temperature of the gas?

Answers

Are there options for this question? ...........

Answer:

Therefore, the temperature of the gas is 84.9 ℃. 28.0 g of N2 gas was found to occupy a volume of 8.44 L at a pressure of 320 kPa.

Explanation:

Therefore, the temperature of the gas is 84.9 ℃. 28.0 g of N2 gas was found to occupy a volume of 8.44 L at a pressure of 320 kPa.

Nitrogen is a group 15 element. What does being In this group imply about the structure of the nitrogen atom?

Answers

Answer:

Nitrogen has 5 valence electrons

Explanation:

nitrogen has it's attoms form triple bonds which are very hard to break

so non-reactive

The food is good but it was okay and it wasn’t worth the price and it would not taste good for a one hour or so it just came in

describe how water molecules can hydrate various substances

Answers

Answer:

A water molecule can react with the carbonyl group of an aldehyde or a ketone to form a substance known as a carbonyl hydrate, as shown in the first reaction below. The carbonyl hydrates usually form a very small percentage of the molecules in a sample of a specific aldehyde or ketone.

(Nice profile pic also UwU)

. Calculate the pH and the pOH of each of the following solutions at 25 °C for which the substances ionize completely:
(a) 0.200 M HCl

(b) 0.0143 M NaOH

(c) 3.0 M HNO3

(d) 0.0031 M Ca(OH)2

Answers

a. HCl:
pH= -log [H3O+]
PH=-log (0.200)
= 0.699

poH= 14-0.699
= 13.301

b. NaOH:
PoH= -log [OH-]
= -log (0.0143)
= 1.845
pH= 14-poH
= 14- 1.845
= 12.16

c. HNO3:
PH= -log[H3O+]
=-log(3.0)
= -0.4771
poH= 14-pH
= 14-9-0.4771
= 14.4771

pH= -0.4771, poH= 14.4771

d. [Ca(OH)2] = 0.0031M
[OH-]= 2X0.0031
[OH-] = 0.0062M

PoH= - log[OH-]
=-log(0.0062)
=-log(6.2x10-3)
=-(-2.21)
= 2.21
PH=14-poH
=14-2.21
=11.79
POH=2.21, PH= 11.79

Based on the molarity of the solutions;

For 0.200 M HCl; pH = 0.699, pOH = 13.301For 0.0143 M NaOH; pOH = 1.845, pH = 12.16For 3.0 M HNO3; pH = -0.4771, poH = 14.4771For 0.0031 M Ca(OH)2; pOH = 2.21, pH = 11.79

What pHand pOH?

pH is the negative logarithm to base ten of the hydrogen ions concentration of a solution.

pH = -log[H+]

pOH is the negative logarithm to base ten of the hydroxide ions concentration.

pOH = -log[OH-]

Also;

pH + pOH = 14

For HCl:

pH = -log [H3O+]

pH =-log (0.200)

pH = 0.699

Then;

poH= 14-0.699

pOH = 13.301

For NaOH:

pOH= -log [OH-]

= -log (0.0143)

pOH = 1.845

Then;

pH= 14-poH

= 14- 1.845

pH = 12.16

For HNO3:

pH= -log[H3O+]

=-log(3.0)

= -0.4771

Then;

pOH = 14-9-0.4771

pOH = 14.4771

For [Ca(OH)2]

molarity = 0.0031M

2 moles of OH- are produced

[OH-]= 2 × 0.0031

[OH-] = 0.0062M

pOH = - log[OH-]

=-log(0.0062)

=-log(6.2x10-3)

=-(-2.21)

pOH = 2.21

Then;

pH =14-2.21

pH =11.79

Learn more about pH and pOH at: https://brainly.com/question/13557815

I.
Look at the pictures below. What can you say about them?
Describe their similarities and differences. Write your answer in
your notebook
Www
cowo
Politics
SXO
is​

Answers

Answer:

Hey , I can't see the picture

Other Questions
The following standards for variable manufacturing overhead have been established for a company that makes only one product:Standard hours per unit of output3.5 hoursStandard variable overhead rate$15.20 per hourThe following data pertain to operations for the last month:Actual hours3,800hoursActual total variable manufacturing overhead cost$59,090Actual output800unitsWhat is the variable overhead efficiency variance for the month help me with this please Many things must be done before a shuttle can launch. The shuttle has many parts. They are made in different places in the United States. The finished parts are sent to NASA's Kennedy Space Center in Florida. The pieces of the shuttle go to the Vehicle Assembly Building. NASA workers connect all the parts. NASA calls it "stacking." After all of the parts are put together, the whole vehicle is called the Space Transportation System. Now, it's time to move to the launch pad. The Space Transportation System rides on a crawler. The top of the crawler is as big as a baseball diamond. The crawler has tracks of wheels like a tank. It is very, very slow. It moves about one mile per hour on a road called the crawlerway. When the shuttle gets to the launch pad, NASA has more work to do before countdown. The shuttle may sit on the launch pad for weeks. This is the countdown clock. It tracks the amount of time until launch. The astronauts get into the orbiter about 3 hours before launch. Finally, everyone waits for the words, "3 . . . 2 . . . 1 . . . Liftoff!"http://www.nasa.gov/audience/forkids/homeWhat is this passage's organizational structure?A. problem and solutionB. chronological orderC. compare and contrastD. cause and effect How much energy does an X-ray with an 8 nm (8 x 10-9m) wavelength have?A. 1.99 x 10-25 JB. 3.33 x 1016 JC. 2.48 x 10-17 jD. 8.28 x 10-26 J when turned about its axis of rotation, which shape could have created this three-dimensional object fill in the blank with spanish vocab wordsnosotros ____ hablamos espanol a ti A school bus can hold a maximum of 45 students. The correct inequality for this word problem is b 45. Why did I use not < in this problem? What'e MoreA. Independent Activity 1Determine the following numerical values for each alasses using table 5 below Convert 240. oz = lb What is the solution to 2x^2+8x=x^2-16?x=4x=-2=2=4 Charlene paid $1540.77 (including sales tax) for a microscope. The sales tax in her state is 7%.What was the price of the microscope before the sales tax was added? PLEASE HELP! WILL MARK BRAINIEST!!I have a question regarding wording of some instructions. I dont want anyone to give me answers or anything, but I just need some clarification on the portion of the instructions below that is in ALL CAPS:On the next slide, using pictures, video and your own words, discuss fitness and nutrition while exploring the following three concepts:- INCLUDE INTERNAL AND EXTERNAL INFLUENCES OF OVERALL HEALTH- Demonstrate positive and negative effects of influences on health.- Demonstrate understanding of balance between the three aspects of the Health Triangle.I have been trying to figure it out for the last 1 hour and really need help. My teacher is off and this is due soon. I'll be sure to mark you brainliest if you give a good response!!Thanks!!!!! What is the percentage yield when 60kg of ammonia is produced from 60kg of hydrogen? or walk inside the poem's roomand feel the walls for a light switch.How does this metaphor reveal Collinss message? A sound wave has a frequency of 192 Hz and travels the length of a football field at a speed of 338.5 m/s. what is the wavelength of the wave? Please help it's urgent!Pls In which situation would hydrogen bonding be present? If you are driving a car with a velocity of -25 m/s and you have an acceleration of -2 m/s^2, are you speeding up or slowing down? Why? A meat pie contains chicken and turkey in the ratio 4: 1. The pie contains 200g of chicken. How much turkey is in the pie? 1. Two hypothetical elements in the periodic table have different characteristics as shown in the following table. ELEMENT, ELECTRONEGATIVITY, TYPE OF ION, ELECTRICAL CONDUCTIVITY, BRIGHTNESS X Low Electro cation ion high conduc brightness yes Y High Electro anion ion none conduc brightness no According to the data in the table, answer the following questions. a. If you were to carry out an experiment with these 2 hypothetical elements, write a hypothesis to differentiate them and write another hypothesis about how they would react with oxygen and water. HYPOTHESIS 1: HYPOTHESIS 2: In four steps, design an experiment (write step 1, step 2, step 3 and step 4) to check and verify what types of links would form these elements X and Y if after a series of reactions these elements join in some type chemical bonding. STEP 1 STEP 2 STEP 3 STEP 4 b. A series of reactions of elements X and Y are given below, complete these reactions bearing in mind that X has an oxidation number +2 and Y has an oxidation number +6. I. X + O2 XO II. Y + O2 YO3. III. XO + H2O X(OH)2 IV. YO3 + H20 H2YO4. V. X(OH)2 + H2YO4 A + H2O. d. Considering the result (A) in reaction number 5, answer: I. What type of chemical bond do you think A has? II. What are its physical and chemical properties? III. Design a four-step experiment so that you can identify the type of chemical bond that substance A obtained in reaction 5 has. The design must contain at least 2 variables to be measured and 2 hypotheses with these variables.