Answer:
False.
The experimental group is the group that is subjected to a specific treatment or intervention in an experiment, while the control group is the group that is left alone or given a placebo to compare the effects of the treatment.
a sample of helium gas has a volume of 620. ml at a temperature of 500. k. if we decrease the temperature to 100. k while keeping the pressure constant, what will the new volume be?
The new volume of the helium gas sample will be 124 ml. This is due to the fact that when the temperature decreases while the pressure remains constant, the volume of a gas will increase.
According to Charles’s law, the volume of a given gas at a constant pressure is directly proportional to its absolute temperature. Therefore, a decrease in temperature, while holding constant the pressure of the helium gas, would result in a decrease in volume.
A constant pressure is the one under which the pressure of a substance remains unchanged as the temperature and/or volume of the substance change. Charles's law may be used to explain the properties of gases, particularly with constant pressure since it states that the volume of a given mass of a gas is directly proportional to its absolute temperature, provided that its pressure remains constant. It's written as:V1/T1 = V2/T2; whereV1 = 620 ml; T1 = 500K; T2 = 100KLet's put the values in the formula given above. The [tex][tex]620/T1 = V2/100V2 = 62,000/500V2 = 124 ml[/tex].[/tex]Therefore, the new volume of helium gas at a temperature of 100K would be 124 ml.
Read more about the volume :
https://brainly.com/question/463363
#SPJ11
The codons in mRNA specify the amino acids that are used to make a protein. Mark the following statement concerning translation TRUE or FALSE.
TRUE. The codons in mRNA, which are collections of three nucleotides, stand for certain amino acids that are combined to produce proteins during translation.
In order to create a protein, the information contained in mRNA must be deciphered during the process of translation. The genetic code that regulates the order in which amino acids are put together to make proteins is found in the sequence of nucleotides in mRNA known as codons. A codon is made up of three nucleotides, each of which stands for an amino acid or a stop signal that denotes the completion of protein synthesis. The ribosome scans the mRNA's codon sequence during translation and matches each codon with the appropriate amino acid. A functional protein is produced when a chain of amino acids that have been joined together by peptide bonds folds into a three-dimensional structure. Hence, the codons in mRNA play a critical role in determining the amino acid sequence of a protein.
learn more about codons here:
https://brainly.com/question/9382652
#SPJ4
what is the mechanism of action for the citrate synthase 2-part reaction? a. hydrolysis followed by condesation b. condensation followed by hydrolysis c. decarboxylation followed by hydrolysis d. decarboxylation followed by condensation
The mechanism of action for the citrate synthase 2-part reaction is decarboxylation followed by condensation.
This reaction is the first and the most critical reaction of the Krebs cycle, which is also called the tricarboxylic acid cycle or the citric acid cycle. The Krebs cycle is a series of enzymatic reactions that occur in the mitochondria of eukaryotic cells.
The Krebs cycle is critical in the metabolic process because it oxidizes the pyruvate generated during glycolysis, produces ATP and reduces coenzymes, and ultimately prepares substrates for the electron transport chain. It is a cyclic reaction consisting of eight steps, with citrate synthase catalyzing the first reaction.
The reaction mechanism of citrate synthase is as follows:
Citrate synthase catalyzes the conversion of acetyl CoA and oxaloacetate to citrate by a decarboxylation reaction followed by a condensation reaction. The decarboxylation reaction is the first step, in which acetyl-CoA loses its acetyl group in the form of carbon dioxide (CO2), producing the four-carbon compound oxaloacetate. This reaction is irreversible and is the rate-limiting step of the cycle. Citrate synthase then catalyzes the condensation reaction, in which the acetyl group of acetyl-CoA is added to the oxaloacetate molecule to form citrate, a six-carbon compound.The mechanism of action for the citrate synthase 2-part reaction is, therefore, decarboxylation followed by condensation.
To know more about decarboxylation click here:
https://brainly.com/question/29573197
#SPJ11
please help and give an explanation i don’t get it
The mass (in grams) of water, H₂O produced from 6.00 moles of hydrogen gas, H₂, is 108 g (last option)
How do i determine the mass of water produced?We'll begin by obtaining the mole of water produced from the reaction. Details below:
2H₂(g) + O₂ -> 2H₂O
From the balanced equation above,
2 moles of H₂ reacted to produce 2 moles of H₂O
Therefore,
6 moles of H₂ will also react to produce 6 moles of H₂O
Finally, we shall determine the mass of water, H₂O produced. Details below:
Molar mass of water, H₂O = 18 g/mol Mole of water, H₂O = 6 molesMass of water, H₂O = ?Mole = mass / molar mass
6 = Mass of water, H₂O / 16
Cross multiply
Mass of water, H₂O = 6 × 18
Mass of water, H₂O = 108 g (last option)
Learn more about mass produced:
https://brainly.com/question/9526265
#SPJ1
Question.05: (3 mrks) Neon gas in luminous tubes radiates red light-the original "neon light." The standard gas containers used to fill the tubes have a volume of 1.0 L and store neon gas at a pressure of 101 kPa at 22 °C. A typical luminous neon tube contains enough neon gas to exert a pressure of 1.3 kPa at 19 °C. If all the gas from a standard container is allowed to expand until it exerts a pressure of 1.3 kPa at 19 °C, what will its final volume be? If Lilia's sister Amelia is adding this gas to luminous tubes that have an average volume of 500 mL, what is the approximate number of tubes she can fill?
Answer:
Answer: The final volume of the gas will be 8.07 L.
Approximate number of tubes Amelia can fill = 8.07 L/500 mL = 16.14 tubes.
The density of a substance is 1.63g/mL. What is the mass of 0.25L of the substance in grams? A. 4.075g B. 40.75g C. 407.5g D. 4075g
Answer:
Explanation: Use the formula density = mass divided by volume
so to get the answer multiply the density by the volume
Answer: 1.63 x (0.25x1000)
we multiply 0.25 by 1000 because we need to use volume in ml instead of L.
True or False: The zeolite that you will make and use has repeating and alternating tetrahedral units of SiO4 and AlO4 bonding through the oxygen atoms.
The zeolite that you will make and use has repeating and alternating tetrahedral units of SiO4 and AlO4 bonding through the oxygen atoms. Therefore, the given statement is true.
Zeolites have repeating and alternating tetrahedral units of SiO4 and AlO4 bonding through the oxygen atoms.Zeolites are aluminosilicate minerals that are mostly found in volcanic rocks and soils.
They have a distinctive and extensive network of pores and channels. Zeolites are also used in ion exchange, adsorption, and catalysis processes as a result of their porous and chemically active structure. Zeolites are extensively employed in the separation, adsorption, and catalytic conversion of petroleum-based products, as well as in waste-water treatment processes. Zeolite is a naturally occurring mineral. However, it may also be synthesized in a laboratory. Zeolites are widely used in several applications due to their porous and chemically active structure.
These applications include gas separation, petroleum refining, catalysis, and water purification. They are used to adsorb impurities, filter out toxic gases, and remove radioactive particles from water.
for such more question on oxygen atoms
https://brainly.com/question/15457775
#SPJ11
At the resting membrane potential, the membrane is most permeable to ________, which moves ________ the cell due to its A) chloride : into B) potassium : into C) sodium : out of D) sodium : into E) potassium : out of
At the resting membrane potential, the membrane is most permeable to potassium ions (K+), which move out of the cell due to its concentration gradient and the negative charge inside the cell. Correct answer is option: E.
This movement of K+ ions out of the cell contributes to the negative resting membrane potential of approximately -70 mV in most cells. The resting membrane potential is maintained by the selective permeability of the cell membrane, which allows for the movement of certain ions across the membrane. In general, the membrane is less permeable to sodium (Na+) and chloride (Cl-) ions at rest, and the movement of these ions across the membrane is limited. Thus, option E "potassium" is the correct answer.
To know more about resting membrane, here
brainly.com/question/8438145
#SPJ4
2 C2H6 + 7 O2 -> 4 CO2 + 6 H2O
Use the given equation for the following questions:
If 20 moles of fuel are combusted in the above equation, how many moles of O2 are consumed?
If 20 moles of fuel are combusted in the above equation, how many moles of CO2 are produced?
Answer:
Hope it's correct
Explanation:
2 mol of C2H6 = 7 mol of O2
So 20 mol of C2H6 = ? (20/2)*7 = 70 mol
How many milliliters of 1.58 M HCl are needed to react completely with 23.2 g of NaHCO3 (= 84.02 g/mol)?
HCl(aq) + NaHCO3(s) ? NaCl(s) + H2O(l) + CO2(g)
a. 175 mL
b. 536 mL
c. 276 mL
d. 572 mL
e. 638 mL
c. 276 mL of 1.58 M HCl.
To answer this question, we need to use the mole ratio between the two reactants: 1 mole of HCl for every 1 mole of NaHCO3.
In this case, we need 23.2 g of NaHCO3, which is equal to 0.273 moles (23.2 g / 84.02 g/mol).
Since we need 1 mole of HCl for every 1 mole of NaHCO3, we can calculate the number of moles of HCl needed with the following equation: 0.273 moles of NaHCO3 x 1 mole HCl/1 mole NaHCO3 = 0.273 moles of HCl.
Now we can use the molarity of HCl (1.58 M) to calculate the volume of HCl needed. 1.58 M HCl x 0.273 moles HCl/1 L HCl = 0.433 L HCl, or 433 mL of HCl. Therefore, the correct answer is c. 276 mL of 1.58 M HCl.
To know more about mole ratio, refer here:
https://brainly.com/question/28997213#
#SPJ11
The descriptions below explain two ways that water is used by plants on a sunny day.
I. In a process called transpiration, some liquid water in leaves changes to water vapor. The water vapor is released into the air through tiny pores in the leaves. This allows more liquid water from the soil to be pulled up the roots and stem to replace water lost from the leaves.
II. Plants use some of this water in leaves in a process called photosynthesis. During photosynthesis, water and carbon dioxide break apart and recombine to form two new substances, oxygen and glucose.
Based on the above description of transpiration and photosynthesis, which type of change happens to water during each process?
In transpiration, because some of its properties change, water undergoes a physical change but keeps its identity. In photosynthesis, because its identity changes, water undergoes a chemical change.
In transpiration, because some of its properties change, water undergoes a chemical change but keeps its identity. In photosynthesis, because its identity changes, water undergoes a physical change.
In transpiration, because its physical properties change, water undergoes a physical change and loses its identity. In photosynthesis, because it keeps its identity, water undergoes a chemical change.
In transpiration, because its chemical properties change, water undergoes a chemical change and loses its identity. In photosynthesis, because it keeps its identity, water undergoes a physical change.
The correct answer is: In transpiration, because some of its properties change, water undergoes a physical change but keeps its identity.
What are transpiration and photosynthesis?Transpiration and photosynthesis are both processes that involve the use of water by plants.
Transpiration is the process by which water evaporates from the leaves of a plant and is released into the atmosphere. This occurs through tiny openings on the surface of leaves called stomata. The water that is lost through transpiration is replaced by water absorbed by the roots of the plant from the soil.
Photosynthesis, on the other hand, is the process by which plants use water, along with carbon dioxide and sunlight, to produce oxygen and glucose. During photosynthesis, water is split into hydrogen and oxygen, and the oxygen is released into the atmosphere as a byproduct. The glucose that is produced is used as a source of energy by the plant.
In transpiration, because some of its properties change, water undergoes a physical change but keeps its identity. In photosynthesis, because its identity changes, water undergoes a chemical change.
To know more about photosynthesis, visit:
https://brainly.com/question/29764662
#SPJ1
Answer:
Its A
Explanation:
Got it right on the quiz
an unknown mineral sample scratches fluorite but cannot scratch apatite. what is the approximate hardness of this mineral?
According to the Mohs scale of hardness, the unidentified mineral sample's hardness can be calculated to be between 4 and 5 if it can scratch fluorite but not apatite.
The Mohs hardness scale, a qualitative scale with 1 being the softest (talc) and 10 being the hardest, rates minerals according to their relative hardness (diamond). The scale is determined by a material's capacity to scrape another mineral. Any mineral with a lower number on the scale can be scratched, while a mineral with a greater number cannot be scratched. The unknown mineral must have a hardness between 4 and 5, as it can scratch fluorite (hardness of 4) but not apatite (hardness of 5). based upon With this knowledge, it is possible to estimate that the unidentified mineral has a Mohs hardness of about 4.5.
learn more about mineral here:
https://brainly.com/question/18078524
#SPJ4
The enthalpy of vaporization for water is 40.7 kJ/mol. Water has a vapor pressure of 101.3 kPa at 100.0 °C. Using the Clausius-Clapeyron equation, what is the vapor pressure for methanol at 73.5°C? Give your answer in KPa, to the first decimal point.
Answer:
The Clausius-Clapeyron equation is given by:
ln(P2/P1) = -(ΔHvap/R) * (1/T2 - 1/T1)
where P1 and T1 are the vapor pressure and temperature of the substance at one point, P2 and T2 are the vapor pressure and temperature at another point, ΔHvap is the enthalpy of vaporization, and R is the gas constant.
We can use this equation to find the vapor pressure of methanol at 73.5°C, given the vapor pressure of water at 100.0°C.
First, we convert the temperatures to Kelvin:
T1 = 100.0°C = 373.2 K
T2 = 73.5°C = 346.7 K
Next, we substitute the values into the equation, along with the enthalpy of vaporization for methanol and the gas constant:
ln(P2/101.3 kPa) = -(35.2 kJ/mol / 8.314 J/(mol*K)) * (1/346.7 K - 1/373.2 K)
Simplifying, we get:
ln(P2/101.3 kPa) = -5.631
Taking the exponential of both sides, we get:
P2/101.3 kPa = e^(-5.631)
P2 = 101.3 kPa * e^(-5.631)
P2 = 2.784 kPa
Therefore, the vapor pressure of methanol at 73.5°C is approximately 2.784 kPa, to the first decimal point.
Which concept accounts for the whole-number subscripts in chemical formulas?A. law of multiple proportionsB. Avogadro's lawC. conservation of energyD. conservation of matte
Answer:
A)law of multiple proportions
Explanation:
Two changes in atmospheric conditions that scientists should collect data on to determine the cause of this change in weather. Explain how the data for each change would provide information on monsoon formation
By collecting data on changes in wind patterns and moisture levels, scientists can gain a better understanding of the atmospheric conditions that are necessary for monsoon formation and identify any changes that may be occurring.
Two changes in atmospheric conditions that scientists should collect data on to determine the cause of a change in weather during monsoon season are:
Changes in wind patterns - By collecting data on wind patterns, scientists can determine how air is moving throughout the atmosphere. This can provide insight into the direction and strength of monsoon winds, which are a key factor in the formation of monsoons. By analyzing wind data over time, scientists can identify any changes that may be occurring and determine how these changes may be affecting monsoon formation.Changes in moisture levels - The amount of moisture in the atmosphere is another key factor in the formation of monsoons. By collecting data on humidity levels and precipitation patterns, scientists can determine how much moisture is in the atmosphere and how it is moving. This can help to identify any changes in moisture levels that may be affecting monsoon formation and help to determine the cause of these changes.To know more about the Weather, here
https://brainly.com/question/16412394
#SPJ4
a) Identify a possible mechanism. b) Define catalyst c) Determine the general order of the reaction. 4. For the reaction at equilibrium: 3Fe+410 Fe,0+4H a) Write the expression of the equilibrium constant. b) Show how the speed of the direct and indirect reaction changes, if the pressure increases 3 times. e) Argue whether the chemical equilibrium shifts when the pressure increases 3 times. (4 points)
3. a) One possible mechanism for this reaction is: 3 Fe + 4 H₂O ⇌ Fe₃O₄ + 4 H₂
b) A catalyst is a substance that increases the rate of a chemical reaction without undergoing any permanent chemical change itself.
c) second-order reaction.
4. a) The expression of the equilibrium constant for the given reaction is:
Kc = ([Fe₃O₄][H₂]⁴) / ([Fe]³[H₂O]⁴)
b) Increasing the pressure will favor the indirect reaction and slow down the direct reaction.
c) Since the indirect reaction is favored by the increased pressure, the chemical equilibrium will shift to the right, towards the product side.
How to express order of reaction?The method of initial rates involves measuring the initial rate of the reaction under different initial concentrations of the reactants. By comparing the initial rates, we can determine the order of the reaction with respect to each reactant.
Assuming that the rate law of the reaction is:
rate = k[Fe]^x[H₂O]^y
where k is the rate constant, and x and y are the orders of the reaction with respect to Fe and H2O, respectively.
Experimentally, measure the initial rate of the reaction under different initial concentrations of Fe and H₂O while keeping the concentration of the other reactant constant.
For example, suppose we measure the initial rates of the reaction at the following initial concentrations:
Experiment #1: [Fe] = 0.1 M, [H₂O] = 0.2 M, initial rate = 0.005 M/s
Experiment #2: [Fe] = 0.2 M, [H₂O] = 0.2 M, initial rate = 0.02 M/s
Experiment #3: [Fe] = 0.4 M, [H₂O] = 0.2 M, initial rate = 0.08 M/s
Use the rate data to determine the orders of the reaction with respect to Fe and H₂O. To do this, we compare the initial rates of the reaction under different initial concentrations of Fe and H₂O while keeping the concentration of the other reactant constant.
Suppose we double the concentration of Fe while keeping the concentration of H₂O constant. According to experiment 2 and experiment 1, the rate of the reaction doubles. This means that the order of the reaction with respect to Fe is 1.
Similarly, if we double the concentration of H₂O while keeping the concentration of Fe constant, we can see that the rate of the reaction doubles from experiment 1 to experiment 3. This means that the order of the reaction with respect to H₂O is also 1.
Therefore, the overall order of the reaction is the sum of the orders of the reactants, which is:
overall order = 1 + 1 = 2
Hence, the given reaction is a second-order reaction.
Learn more here on mechanisms here: https://brainly.com/question/27921705
#SPJ1
The complete question is:
3. For the reaction at equilibrium: 3Fe+410 Fe,0+4H a) Identify a possible mechanism. b) Define catalyst c) Determine the general order of the reaction. 4. For the reaction at equilibrium: 3Fe+410 Fe,0+4H a) Write the expression of the equilibrium constant. b) Show how the speed of the direct and indirect reaction changes, if the pressure increases 3 times. e) Argue whether the chemical equilibrium shifts when the pressure increases 3 times. (4 points)
A hard-working human brain, perhaps one that is grappling with physical chemistry, operates at about 25 W (1 W = 1J s-'). What mass of glucose must be consumed to sustain that power output for an hour?
Approximately 5.78 grams of glucose must be consumed to sustain a power output of 25 W for one hour.
Power = Energy/Time
25 W = Energy/3600 s
Energy = 25 W x 3600 s = 90000 J
C6H12O6 + 6O2 → 6CO2 + 6H2O + energy
The energy produced by the complete oxidation of glucose is approximately 2.8 x 10^6 J/mol. Therefore, to produce 90,000 J of energy, we need to divide 90,000 J by the energy produced per mole of glucose:
90,000 J / (2.8 x 10^6 J/mol) = 0.0321 mol
The molar mass of glucose is approximately 180 g/mol. Therefore, the mass of glucose required to sustain a power output of 25 W for one hour is:
0.0321 mol x 180 g/mol = 5.78 g
Power in physics is defined as the rate at which work is done or energy is transferred. It is a scalar quantity that measures how quickly a certain amount of energy is being transferred or converted from one form to another. The standard unit for power is the watt (W), which is equivalent to one joule per second (J/s).
In more mathematical terms, power is given by the formula P = W/t, where P represents power, W represents work, and t represents time. Power is also related to force and velocity through the equation P = Fv, where F represents force and v represents the velocity.
Power is an important concept in physics and engineering, as it is used to describe the performance of machines, engines, and other energy conversion systems. The greater the power of a system, the more work it can do in a given amount of time, and the faster it can accomplish a task.
To learn more about Power visit here:
brainly.com/question/13937812
#SPJ4
citation chaining is a process for finding more articles that may be relevant for your research topic. which of these would be a good starting point for this process?
A good starting point for citation chaining would be a relevant and well-cited article or book that directly relates to your research the topic.
This article or book should have a comprehensive bibliography or the reference list that you can use to find additional sources. By examining the references cited in the original article, you can identify the other articles and books that are likely to be relevant to your research. Then, you can examine the references in those articles to find even more sources, continuing the process until you have a comprehensive set of relevant sources for your research.
To know more about citation chaining, here
brainly.com/question/29413043
#SPJ4
explain why the ph of 0.1 m ethanol is higher than the ph of 0.1 m acetic acid. draw structures to support your explanation.
The pH of 0.1 M ethanol is higher than the pH of 0.1 M acetic acid is because ethanol is a neutral molecule while acetic acid is a weak acid.
What are the effects of change in pH on different molecules?The pH of 0.1 M ethanol is higher than the pH of 0.1 M acetic acid because ethanol is a neutral molecule and does not donate or accept protons, while acetic acid is a weak acid that can donate a proton to water, creating hydronium ions (H₃O⁺) and decreasing the pH.
Here are the structures of ethanol and acetic acid to support this explanation:
Ethanol (CH₃CH₂OH):
H H
| |
H-C-C-OH
| |
H H
Acetic Acid (CH₃COOH):
H O
| ||
H-C-C-O-H
|
H
In acetic acid, the carboxylic acid group (-COOH) can donate a proton (H⁺) to water, which increases the concentration of hydronium ions (H₃O⁺) in the solution, leading to a lower pH:
CH₃COOH + H₂O → CH₃COO⁻ + H₃O⁺
Ethanol, on the other hand, does not have an acidic hydrogen and will not donate protons to water, so its pH remains neutral (pH around 7).
To know more about pH:
https://brainly.com/question/3649733
#SPJ11
2Na + 2H2O → 2NaOH + H2
What is the total number of moles of hydrogen produced when 4 moles of sodium react completely?
A. 1 B. 2 C. 3 D. 4
When 4 moles of sodium fully react, 2 moles of hydrogen are produced as a whole. The right answer is B.
The balanced equation for the reaction between sodium and water is 2Na + 2H2O → 2NaOH + H2. This equation shows that 2 moles of sodium react with 2 moles of water to produce 1 mole of hydrogen gas.
If 4 moles of sodium react completely, we can calculate the amount of hydrogen produced by using stoichiometry. Since 2 moles of sodium produce 1 mole of hydrogen, 4 moles of sodium will produce 2 moles of hydrogen (4 moles Na x 1 mole H2 / 2 moles Na = 2 moles H2).
Therefore, the total number of moles of hydrogen produced when 4 moles of sodium react completely is 2 moles. The correct answer is B.
To learn more about sodium refer to:
brainly.com/question/29327783
#SPJ4
Calculate Delta H r* n for Ca(s) + 1/2 * O_{2}(g) + C*O_{2}(g) -> CaC*O_{3}(s)
The standard molar enthalpy of reaction for the given reaction is -822 kJ/mol.
The balanced chemical equation for the reaction is:
Ca(s) + 1/2 O2(g) + CO2(g) → CaCO3(s)
The standard enthalpies of formation for the reactants and product are:
ΔH°f[Ca(s)] = 0 kJ/mol
ΔH°f[O2(g)] = 0 kJ/mol
ΔH°f[CO2(g)] = -385 kJ/mol
ΔH°f[CaCO3(s)] = -1207 kJ/mol
The ΔH°r for the reaction can be calculated using the following formula:
ΔH°r = ΣnΔH°f(products) - ΣnΔH°f(reactants)
ΔH°r = [ΔH°f(CaCO3(s))] - [ΔH°f(Ca(s)) + 1/2ΔH°f(O2(g)) + ΔH°f(CO2(g))]
ΔH°r = [-1207 kJ/mol] - [0 kJ/mol + 1/2(0 kJ/mol) + (-385 kJ/mol)]
ΔH°r = -822 kJ/mol
Delta (Δ) is a symbol used to represent a change or difference in a physical or chemical property. It is often used to denote the change in energy or enthalpy of a chemical reaction, as well as changes in temperature, pressure, or concentration.
For example, when a chemical reaction occurs, the difference in energy between the reactants and products can be represented by the symbol ΔH, with a positive value indicating an endothermic reaction (absorbing heat) and a negative value indicating an exothermic reaction (releasing heat). Delta can also be used to represent changes in other properties, such as entropy (ΔS) or free energy (ΔG), which are important in predicting the spontaneity and direction of chemical reactions.
To learn more about Delta visit here:
brainly.com/question/23081977
#SPJ4
What volume of 0.125 M HNO3, in milliliters, is required to react completely with 1.70 g of Ba(OH)2? 2 HNO3(aq) + Ba(OH)2(s) Ba(NO3)2(aq) + 2 H2O(l)
Answer:
What volume of 0.125 M HNO3, in milliliters, is required to react completely with 1.70 g of Ba(OH)2? 2 HNO3(aq) + Ba(OH)2(s) Ba(NO3)2(aq) + 2 H2O(l)
Explanation:
The complete and balanced chemical equation for the reaction of nitric acid
H
N
O
3
with barium hydroxide
B
a
(
O
H
)
3
is given by
2
H
N
O
3
(
a
q
)
+
B
a
(
O
H
)
2
→
B
a
(
N
O
3
)
2
(
a
q
)
+
2
H
2
O
(
a
q
)
The volume of a certain concentration of nitric acid
H
N
O
3
required to react with a particular amount of
B
a
(
O
H
)
2
is obtained by first calculating the number of moles of
H
N
O
3
using stoichiometry. Using the molar mass of
B
a
(
O
H
)
2
,
M
M
B
a
(
O
H
)
2
=
171.3
g
/
m
o
l
,
and the mole ratio
2
m
o
l
H
N
O
3
1
m
o
l
B
a
(
O
H
)
2
,
then
{eq}\begin{align} \rm moles\ of\ HNO_3...
hope it hels you
PLS HELP!!!
Match the terms to the appropriate definitions or descriptions
1. - c. Absolute dating
2. - k. Zircon
3. - m. Meteorites
4.- h. Compression melting
5. - e. Relative dating
6. - a. An igneous intrusion
7. - g. Unconformity
8. - d. Index fossils
9. - f. The Grand Canyon
10.- b. Iguazu Falls in Argentina
11. -h. Yosemite Valley
12.- i. Carbon 14 dating
13.-c. Radiometric dating
What is Carbon 14 dating?Carbon 14 dating, also known as radiocarbon dating, is a technique used to determine the age of organic materials based on their content of the radioactive isotope carbon-14. Carbon-14 is a naturally occurring isotope of carbon that is formed in the upper atmosphere by the interaction of cosmic rays with nitrogen atoms. This carbon-14 is incorporated into carbon dioxide molecules, which are then taken up by plants during photosynthesis and subsequently passed on to animals that eat those plants.
When an organism dies, it stops taking in carbon-14, and the carbon-14 in its tissues begins to decay into nitrogen-14 at a known rate. By measuring the amount of carbon-14 that remains in the sample, scientists can determine how long it has been since the organism died.
To know more about cosmic rays, visit:
https://brainly.com/question/13960192
#SPJ1
At stp which of following would have the same number of molecules a 1 l of c2h4 gas? a. 0. 5 of H2 b. 1L of Ne c. 2L of H2O d. 3L of cl2
None of the available choices have as many molecules as 1 L of STP-produced C2H4 gas.
At STP (Standard Temperature and Pressure), which is defined as a temperature of 273.15 K and a pressure of 1 atmosphere, the volume of a gas is directly proportional to the number of molecules present. This means that if we have two gases at STP with the same volume, they must contain the same number of molecules.
For a gas with a given volume, the number of molecules present can be calculated using the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
To determine which gas has the same number of molecules as 1 L of C2H4 gas, we need to calculate the number of moles of C2H4 present in 1 L of C2H4 gas. The molar volume of any gas at STP is 22.4 L/mol.
The molar mass of C2H4 is 28.05 g/mol, so 1 L of C2H4 gas at STP contains:
n = m/M = 1000 g / 28.05 g/mol = 35.6 mol
Therefore, 1 L of C2H4 gas contains 35.6 moles of C2H4.
(a) For 0.5 L of H2 gas, the number of moles present is:
n = PV/RT = (1 atm x 0.5 L) / (0.0821 L atm/mol K x 273.15 K) = 0.0207 mol
Since 0.0207 mol is less than 35.6 mol, 0.5 L of H2 gas has fewer molecules than 1 L of C2H4 gas.
(b) For 1 L of Ne gas, the number of moles present is:
n = PV/RT = (1 atm x 1 L) / (0.0821 L atm/mol K x 273.15 K) = 0.0409 mol
Since 0.0409 mol is less than 35.6 mol, 1 L of Ne gas has fewer molecules than 1 L of C2H4 gas.
(c) For 2 L of H2O gas, the number of moles present is:
n = PV/RT = (1 atm x 2 L) / (0.0821 L atm/mol K x 273.15 K) = 0.082 mol
Since 0.082 mol is less than 35.6 mol, 2 L of H2O gas has fewer molecules than 1 L of C2H4 gas.
(d) For 3 L of Cl2 gas, the number of moles present is:
n = PV/RT = (1 atm x 3 L) / (0.0821 L atm/mol K x 273.15 K) = 0.123 mol
Since 0.123 mol is less than 35.6 mol, 3 L of Cl2 gas has fewer molecules than 1 L of C2H4 gas.
Therefore, none of the given options have the same number of molecules as 1 L of C2H4 gas at STP.
To learn more about molecules refer to:
brainly.com/question/14646440
#SPJ4
A student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. What is the rate law of the reaction? Rate = k Rate = k[A] Rate = k[A]2 Rate = k[A]3
A student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. The rate law of the reaction is b. Rate = k[A]
The given question is related to the rate law of the reaction. The student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. The rate law of a reaction is a mathematical equation that relates the rate of the reaction to the concentrations of reactants and the reaction's constant of proportionality. The rate law is also called the rate equation or rate expression.
As per the given information, the plot of [A] vs t is linear, which means that the reaction is a first-order reaction. The plot of ln[A] vs t is non-linear, which means that the reaction is not zero-order or first-order. It could be a second-order or third-order reaction. The plot of 1/[A] vs t is non-linear, which means that the reaction is not a first-order reaction. It could be a second-order or third-order reaction. Therefore, the rate law of the reaction can be given as Rate = k[A]. This represents a first-order reaction. Hence, the correct option is Rate = k[A].
Learn more about rate law at:
https://brainly.com/question/14779101
#SPJ11
photosystem ii receives replacement electrons from molecules of
Photosystem II receives replacement electrons from molecules of water (H2O) during the light-dependent reactions of photosynthesis.
Photosystem II (PSII) is a protein complex found in the thylakoid membrane of chloroplasts in photosynthetic organisms. It plays a critical role in the light-dependent reactions of photosynthesis by harnessing energy from sunlight to split water molecules into oxygen, protons, and electrons. The replacement electrons for PSII are derived from the oxidation of water molecules. This process, known as photolysis, involves the transfer of electrons from water molecules to PSII, replenishing the electrons lost during light-dependent reactions. As a result, water is converted into oxygen gas, which is released into the atmosphere as a byproduct of photosynthesis.
In summary, molecules of water provide the replacement electrons required by PSII to maintain the flow of electrons during the light-dependent reactions of photosynthesis.
learn more about molecules of water here:
https://brainly.com/question/26529979
#SPJ4
The equation for the combustion of propane is elven below
C}Hs (g) +
5
02 (g)
3
CO, (g) +
4
H20 (g)
a. Use the law of conservation of mass to balance the equation, and place the appropriate coefficients in front of each species in the equation.
b. For each molar quantity given in the table below, provide the number of moles of the other reactants or products
nocossarv for comolete reaction to ake Dace.
The coefficients that would balance the reaction equation is;
C3H8 + 5O2 → 3CO2 + 4H2O
How do you balance a reaction equation?
Here are the steps to balance a chemical equation:
Write the unbalanced chemical equation using the correct chemical formulas for the reactants and products.
Count the number of atoms of each element on both the reactant and product sides of the equation.
Start by balancing the atoms of the most complex or least common element in the equation, such as oxygen or hydrogen.
Balance the element by adding coefficients (whole numbers) in front of the formulas for the reactants or products.
Repeat this process for each element in the equation until the number of atoms of each element is equal on both sides.
Double-check your work by counting the number of atoms of each element and making sure they are balanced.
Learn more about reaction equation:https://brainly.com/question/3588292
#SPJ1
how to if the initial concentration of ab is 0.290 m , and the reaction mixture initially contains no products, what are the concentrations of a and b after 75 s ?
The concentrations of A and B in the reaction after a time of about 75 seconds are 0.0465 M.
What is the concentration of a and b?The initial concentration of AB is 0.290M. The reaction mixture initially contains no products. The reaction time is 75 seconds, and you need to determine the concentration of A and B. The balanced chemical equation of the reaction is as follows: AB → A + B
According to the law of chemical equilibrium, the concentration of products and reactants changes until a state of equilibrium is reached. As a result, the initial concentration of AB decreases, while that of A and B increases by the same amount. At equilibrium, the rate of the forward reaction is the same as the rate of the backward reaction. As a result, the concentration of the reactants and products remains constant for a long period of time, and the reaction has reached equilibrium. As a result, it is important to identify whether or not the reaction has reached equilibrium. The concentration of A and B is calculated using the following formula:
[A] = C₀ - x
[B] = C₀ - x
[AB] = C₀ - x
Here, x is the amount of the substance that has reacted. Since, we know the initial concentration of AB, we can solve for the value of x. We will then use the value of x to compute the concentrations of A and B. For a reaction, the initial concentration of AB is 0.290M. The reaction mixture initially contains no products. The reaction time is 75 seconds, and you need to determine the concentration of A and B.
The given reaction can be balanced as follows: AB → A + B. Let's assume that at equilibrium, the amount of A and B produced is "x."
[AB] = C-x
Let's calculate the equilibrium concentration of AB:
[AB] = C₀ - x = 0.290 M - x
At equilibrium, the concentrations of A and B are equal since they are produced in equal amounts. Using the law of chemical equilibrium, we can construct the equilibrium constant expression for the reaction:
Kc =x²{0.290 - x}
The equilibrium concentration of AB is 0.290 M - x. The equilibrium concentration of A and B is: x². The equilibrium constant expression can be used to find the value of x. Put the value of [AB], [A], and [B] in the formula of equilibrium constant expression: Kc = x²{0.290 - x}
5.26 = x²{0.290 - x}
{x=0.093}
After solving for x, we get the value of 0.093 M. Therefore, the concentration of A and B at equilibrium is:
[A] = [B] = x{2} = {0.093}{2} = 0.0465
Hence, the concentrations of A and B after 75 seconds are 0.0465 M.
Learn more about Equilibrium concentration here:
https://brainly.com/question/16645766
#SPJ11
1. calculate the final concentration of sodium azide and dcmu in the locomotion chambers. show your work. The DCMU is a 10mM concentrationThe Sodium Azide is a 1M concentration.If you add 10mL of the Chlamydomonas, 100 microliters of sterile water, and 100 microliters of 10mM DCMU what is the final concentration of DCMU?If you add 10mL of the Chlamydomonas, 100 microliters of sterile water, and 100 microliters of 1M Sodium Azide what is the final concentration of DCMU?
The final concentration of DCMU in the locomotion chambers will be 0.1 mM. If 10mL of the Chlamydomonas, 100 microliters of sterile water, and 100 microliters of 10mM DCMU is added.
To Calculate the final concentration of Sodium Azide and DCMU in the locomotion chambers. The final concentration of Sodium Azide in the locomotion chambers will be 10mM (millimolar) if 10mL (milliliters) of the Chlamydomonas, 100 μL (microliters) of sterile water, and 100 μL of 1M (molar) Sodium Azide is added.
The final concentration of DCMU (3-(3,4-dichlorophenyl)-1,1-dimethylurea) in the locomotion chambers will be 0.1 mM (millimolar) if 10 mL (milliliters) of the Chlamydomonas, 100 μL (microliters) of sterile water, and 100 μL of 10 mM (millimolar) DCMU are added.
Calculating the final concentration of DCMU:
Formula: C1V1 = C2V2C1 = initial concentration of DCMU = 10 mMV1 = volume of DCMU added = 100 μL (microliters)C2 = final concentration of DCMU = ?V2 = final volume = 10 mL + 100 μL + 100 μL = 10.2 mL
(convert 100 μL to mL by dividing it by 1000)
Substituting the values in the formula:
C1V1 = C2V210 mM x 100 μL = C2 x 10.2 mL1000 (since 1 mL = 1000 μL)C2 = 0.098 mM (millimolar) = 0.1 mM (approx.)
Thus, the final concentration of DCMU in the locomotion chambers will be 0.1 mM if 10mL of the Chlamydomonas, 100 microliters of sterile water, and 100 microliters of 10mM DCMU is added.
For more such questions on concentration , Visit:
https://brainly.com/question/28564792
#SPJ11
Describe a hybridization scheme for the central atom and molecular geometry of the triiodide ion,
Answer:
Explanation:
I_3^−
The triiodide ion, I3−, is a polyatomic anion composed of three iodine atoms. It has a central iodine atom, which is surrounded by two other iodine atoms in a trigonal planar geometry. The hybridization of the central atom is sp2. This is because the central atom has 3 electron pairs in its valence shell, which means it needs to form three bonds with the other atoms. This requires the central atom to use one s-orbital and two p-orbitals to form three sp2 hybrid orbitals. These three sp2 orbitals are then used to form the three bonds with the other two iodine atoms, resulting in a trigonal planar geometry.
