Are all elements atoms and are all atoms elements?
Answer:
yes
Explanation:
because is smallest element that are made up of atom
Answer: Yes
Explanation:
ASAP
The concentration of reactants and products and the rate of reaction were measured during a chemical reaction. After the first 3 seconds, the rate of reaction was 1.8 x10−6 M/s. Which of the following would explain a lower rate after another 3 seconds?
A - The concentration of reactants increased while the concentration of product decreased.
B - The concentration of reactants decreased while the concentration of product increased.
C - All concentrations of reactants and products decreased.
D - All concentrations of reactants and products increased.
Answer:
B
Explanation:
During the first half of the reaction there was an increase in the rate of reaction due to the high concentration of the reactants. But as the reaction continues we witness a decrease in the amount of reactants which lowers the rate.
Answer:
B. The concentration of reactants decreased while the concentration of product increased.
Explanation:
took the test :)
pentanitrogen heptachloride formula
Answer:
Explanation:
this is the answer hope it helps!(:
The chemical formula of pentanitrogen heptachloride is N₅Cl₇ as it has 5 nitrogen atoms and 7 chlorine atoms.
What is chemical formula?
Chemical formula is a way of representing the number of atoms present in a compound or molecule.It is written with the help of symbols of elements. It also makes use of brackets and subscripts.
Subscripts are used to denote number of atoms of each element and brackets indicate presence of group of atoms. Chemical formula does not contain words. Chemical formula in the simplest form is called empirical formula.
It is not the same as structural formula and does not have any information regarding structure.It does not provide any information regarding structure of molecule as obtained in structural formula.
There are four types of chemical formula:
1)empirical formula
2) structural formula
3)condensed formula
4)molecular formula
Learn more about chemical formula,here:
https://brainly.com/question/29031056
#SPJ2
PLZ PLZ PLZ PLZ PLZ PLZ PLZ PLZ PLZ PLZ PLZ PLZ PLZ PLZ HELP ME......
Answer:
a) clockwise
b) clockwise and
c) anticlockwise
Temperature is measured in what unit?
J
J/goC
J/g
oC
Temperature is measured in Kelvin..
Which one of the following is the correct relation?
v = u – at
v2 = u2 – 2as
v2 = u2 + 2as
v = at - u
Answer:
v2 = u2 + 2as
it is the correct answer
name some examples of chemical solutions and maybe give a clear explanation as to what chemical solutions are
Answer:
Some examples of solutions are salt water, rubbing alcohol, and sugar dissolved in water. ... In our example of salt water, the solute is the salt. Solvent: this is the substance that makes up the majority of the solution. This is the part where the solute is dissolved.
Explanation:
I hope they should be right answer
The density of water is 1 g/cm3. Brent used the following method to convert 1 g/cm3 to kg/m3. An equation is shown. The expression on the left has three terms separated by the multiplication sign. The first term is 1 g by 1 cubic cm. The second term is 1 kg by 1000 kg. The third term is 100 cm raised to the power of 3 divided by 1 m raised to the power of 3. The number on the right of the equal to sign is 1000 kg per cubic meter. (1 kg = 1,000 g and 1 m = 100 cm) What is the error in Brent's conversion method?
Answer:
The error includes;
a) The wrong denominator for the equivalent fraction of kilograms to grams
b) The use of the scale factor of length rather than the scale factor of volume for the equivalent fraction of cubic centimeters to cubic meters
c) The arrival at the correct 1000 kg/m³ rather than 0.1 g/m³ based on the expression on the left of the equation
Explanation:
The density of water = 1 g/cm³
The given equation is presented as follows;
1 g/cm³ × 1 kg/(1000 kg) × 100 cm³/(1 m³) = 1000 kg/m³
The error in the conversion method are;
a) The conversion, 1 kg/(1,000 kg) has an error, the correct conversion is (1 kg)/1,000 g)
b) The volume conversion error, 100 cm³/(1 m³), the correct volume conversion is (100 cm)³/(1 m³) = 1,000,000 cm³/(1 m³)
c) The right of the equal to sign error; using the left side expression only, the (wrong) answer is 0.1 g/m³
The correct equation is presented as follows;
1 g/cm³ × 1 kg/(1000 g) × 1,000,000 cm³/(1 m³) = 1000 kg/m³
Answer:
C. 1,000 kg should be written as 1,000 g.
Explanation:
Got it right on my test :)
What produces the large amount of energy released by a nuclear reaction?
A. the "disappearance" of a small number of electrons.
B. the "creation" of a small amount of mass.
c. the "disappearance" of a small amount of mass.
D. the "creation" of a small number of electrons.
Answer: C the “disappearance” of a small amount of mass.
Explanation:
Need help :)….please
Answer:
i think B is correct
Explanation:
Using these metal ion/metal standard reduction potentials calculate cell potential for Cu2+(aq) + Cd(s) →Cd2+(aq)+ Cu(s) Cu2+(aq)|Cu(s) + 0.34 VNi2+(aq)|Ni(s) -0.25 Cd2+(aq)/Cd(s) -0.4V
Solution :
Cd(s) ----------------------> [tex]Cd^{+2}[/tex] (aq) + 2[tex]e^-[/tex] , [tex]E_0[/tex] = 0.34 v
[tex]Cu^{+2}[/tex] (aq) + 2[tex]e^-[/tex] ------------> Cu (s) , [tex]E_0[/tex] = -0.04 v
----------------------------------------------------------------------------------------------
Cd(s) + [tex]Cu^{+2}[/tex] (aq) -------------> [tex]Cd^{+2}[/tex] (aq) + Cu (s) , [tex]E_0[/tex] = 0.30 v
The cell potential is defined as the measure of [tex]\text{ potential difference }[/tex] between the [tex]\text{two half cells}[/tex] of an electrochemical cell.
The number of joules required to heat one gram of a substance one degree Celsius is _____.
endothermic
temperature
exothermic
specific heat capacity
17. The name of the reaction that produces esters is
A. addition.
B. anionic initiated polymerization.
C. radical initiated polymerization.
D. dehydration
Answer:
the name of reaction that produces esters is dehydration.
Which of the following pairs of elements will form ionic bonds with each
other?
A. Silver (Ag) and silver (Ag)
B. Lithium (Li) and iodine (1)
C. Bromine (Br) and bromine (Br)
D. Carbon (C) and chlorine (CI)
Answer:
B. Lithium (Li) and iodine (1)
Explanation:
Ionic bond is a type of chemical bond that is formed between a metallic element and a non metallic element. The positive charge of the metallic ion is attracted to the negative charge of the non metallic ion to form an ionic bond.
According to the options given in this question, lithium and iodine will form an IONIC bond because lithium is a cation (+ve ion) while iodine is an anion (-ve).
The
Is the treatment you manipulate in an experiment?
Answer:
Not exactly such but Experimental manipulation describes the process by which researchers purposefully change, alter or influence the independent variables(IVs), which are also called treatment variables or factors in an experimental research design.
What is an atomic mass unti
Explanation:
a unit of mass used to express atomic and molecular weights, equal to one twelfth of the mass of an atom of carbon-12.
Answer:
Atomic Mass Unit is also called Dalton. It is used to express atomic and molecular weight. It is defined as 1/12 of the mass of an unbound neutral atom of carbon.
WILL MARK BRAINLIEST IF CORRECT
Answer:
3 - a heterogeneous mixture
4- Sweet tea is an homogeneous mixture
Answer:
Explanation:
6. d
7. b
8. c
balance this equation
PB3 O4 + H2 → PB + H2O
Answer:
Pb3O4 + 4H2 → 3Pb + 4H2O
Explanation:
Pb3O4
Tritium - H2
Molar Mass of H2 Bond Polarity H-3 Hydrogen-3 3H T
Products
Lead - Pb
Molar Mass of Pb Plumbum Element 82 Bulk Lead
Water - H2O
Molar Mass of H2O Oxidation Numbers of H2O Dihydrogen Monoxide Dihydridooxygen Hoh Hydrogen Hydroxide Dihydrogen Oxide Oxidane Hydrogen Oxide Pure Water
How many Calcium (CA) Atoms are in Calcium Oxide
What is a weak acid?
A. An acid that does not have a conjugate base
B. An acid that does not dissolve completely
C. An acid that has been diluted with water
D. An acid that has a very low pH value
Answer:
B
Explanation:
strong acids ionize completely in water
Answer:
An acid that does not dissolve completely
Explanation:
What are you most likely to observe when an endothermic reaction is taking place?
Answer:
An endothermic reaction is when heat is needed by the reaction, so it draws heat from its surroundings, making them feel cold. Just like a ice pack.
9. Which is true of a radioisotope that is used to date rock formations?
Answer:
Radiometric dating or radioactive date is the method that uses radioisotope to date the formation of a rock. The age of the rocks will be determined.
Explanation:
Radioactive deterioration is a natural process and results from the unstable atomic core, which releases bits and parts.
These radioactive particles are released as (there are many types). This decline process results in a more equilibrated nucleus, which makes the atom stable when the number of protons and neutrons balances.
This radioactivity is suitable for dating, as a radioactive "parent" item is constantly decaying into a stable "daughter" element.
A single mineral grain or a whole rock may be dated. There are techniques by which the sample is excited in a nuclear reactor and then measured with a mass spectrometer. The isotope (such as in the argon-argon scheme).
Others put mineral grains under a special microscope, fir in the grains with an ionising laser beam that releases the mineral and the isotopes.
The isotopes are measured by a mass spectrometer inside the same machine (an example of this is SIMS analysis).
ASAP
What happens to a glass of pure fruit juice when water is added to it?
A - The number of moles of fruit juice increases.
B - The number of moles of fruit juice decreases.
C - The molarity of the juice increases.
D - The molarity of the juice decreases.
D. The MOLARITY of the juice DECREASES when water is added to it.
MOLARITY refers to the amount of a substance (solute) in a certain volume of solution. It is a measure of the CONCENTRATION OF A SOLUTION. In chemistry, molarity is calculated by dividing the number of moles of a solute by the volume of the solvent i.e.
MOLARITY (mol/L or M) = number of moles (n)/volume of solvent (V)
* The above equation means that the molarity of a solution is inversely proportional to its volume i.e. as molarity increases, volume decreases and vice versa.
According to this question, water is added to a glass of pure fruit juice (dilution). This means that the volume of the juice will increase. As the volume increases via addition of water, the MOLARITY DECREASES.
Learn more: https://brainly.com/question/20899596
: Axit sunfurơ (H2SO3) là axit yếu, ngay trong dung dịch H2SO3 cũng bị phân hủy thành chất X và H2O. X là:
A. H2S B. SO2 C. H2SO4 D. SO3
Answer:
DD
Explanation:
26. Calculate the mass of hydrogen formed when 25 grams of aluminum reacts with excess hydrochloride acid. 2AI + 6HCl →l Al2Cl6 + 3H2
Answer:
2.76 gram
Explanation:
2AI + 6HCl → 2AlCl3 + 3H2
get the mol of aluminum => n = m / M = 25 / 27 = 0.925 (mol)get the ratio mol of Hydro => nH2 = 0.925 * 3 / 2 = 1.38 (mol)get weight of hydro mH2 = n x M = 1.38 x 2 = 2.76 (gram)Answer
Al +2 HCl - AlCl2 + H2
an atom contains positive protons and negative electrons. Why atom is electrically neutral.
Answer:
atom is electrically neutral because
the no.of protons is equal to no.of
electrons.
Therefore the negative charge and
positive charge cancels out.
plz search rhe chemistry project on any topic..
IF NOT THEN SORRY :)
what is used in conjunction with a scale balance to weigh dry chemicals
why do the aquatic plants not break down by water current?
1s 2s22p63s23p4
How many valence electrons does this atom have?
2
6
4
12
Answer:
6
Explanation:
How many valence electrons does this atom have?
answer 6
Answer:
6.
Sulphur has 6 valence electrons.
( .°. that's the electronic configuration of sulphur .)
