To check the temperature leads of an electronic thermometer for low temperature, they should be stirred in a container ofChoose matching definitiona. Electronic leak detectorsb. Suspended in a pan of boiling waterc. Electronic thermometerd. Crushed ice and pure water

Answers

Answer 1

To check the temperature leads of an electronic thermometer for low temperature, they should be stirred in a container of (a)Crushed ice and pure water is correct option .

Devices that measure temperature or a temperature gradient are known as thermometers (the degree of hotness or coldness of an object). Two crucial components make up a thermometer .

A temperature sensor that changes in response to changes in temperature, such as the bulb of a mercury-in-glass thermometer or the pyrometric sensor in an infrared thermometer.

A way to translate this change into a numerical value (e.g. the visible scale that is marked on a mercury-in-glass thermometer or the digital readout on an infrared model). In technology and industry, as well as in meteorology, health, and scientific study, thermometers are frequently used to monitor processes.

To know more about thermometer

https://brainly.com/question/27420559

#SPJ4


Related Questions

location of inhibitors bound to group iva phospholipase a2 determined by molecular dynamics and deuterium exchange mass spectrometry. t/f

Answers

Location of inhibitors bound to group iva phospholipase a2 determined by molecular dynamics and deuterium exchange mass spectrometry.   (True)

Combining deuterium exchange mass spectrometry (DXMS) and molecular dynamics, we investigated the binding of group IVA (GIVA) phospholipase A2 (PLA2) inhibitors (MD). On the basis of deuterium exchange results, models of the GIVA PLA2 inhibitors pyrrophenone and the 2-oxoamide AX007 docked into the protein were created, and comprehensive molecular dynamics simulations were performed to determine protein–inhibitor interactions. The models demonstrate that both inhibitors interact with crucial residues that modify the deuterium exchange pattern in response to inhibitor binding. Pyrrophenone is primarily associated with the protein through contacts close to the active site, whereas oxoamide is primarily attached through contacts remote from the active site. We also compare the dynamics of the two inhibitor-bound complexes around the active site. It is possible to create better inhibitors against GIVA PLA2 by combining computational and experimental approaches to define more precise inhibitor binding locations.

Mass Spectrometry:

In order to determine the mass-to-charge ratio (m/z) of one or more molecules found in a sample, mass spectrometry is a valuable analytical instrument. The precise molecular weight of the sample's constituent parts can frequently be determined using these measures as well. Mass spectrometers are typically used to quantify known substances, identify novel compounds by molecular weight determination, and assess the structure and chemical characteristics of molecules.

∴ Location of inhibitors bound to group iva phospholipase a2 determined by molecular dynamics and deuterium exchange mass spectrometry.   (True)

Learn more about Mass Spectrometry here

https://brainly.com/question/14569480

#SPJ4

which of the following sequences lists methods for determining distance in the correct order from nearest to farthest?

Answers

Parallax, main-sequence fitting, cepheid variables, Tully-Fisher relation, and Hubble's law are the sequence lists methods for determining distance.

Parallax is the closest method for determining distance. This method uses the principle of triangulation to measure the distance of a nearby star relative to Earth. Main-sequence fitting is another method used to measure the distance of stars. This method compares the brightness of a star to other stars of known distance and luminosity to determine its distance.

Cepheid variables are stars whose brightness varies in a predictable way over time. This method uses the period of the star's brightness to determine its intrinsic luminosity, and then its distance. The Tully-Fisher relation is a method for measuring the distance of galaxies. This method uses the rotation speed of the galaxy and its brightness to calculate its distance.

Finally, Hubble's law is the most distant method for determining distance. This law states that the farther away a galaxy is, the faster it moves away from us. This allows us to calculate the distance of galaxies by measuring their rate of recession.

For more questions like Hubble's law click the link below:

https://brainly.com/question/29869676

#SPJ4

What does the law of conservation of energy state?
energy cannot be destroyed but it can change forms
energy always gets used up in every chemical reaction
energy can be destroyed but not created
energy is always the same and it cannot be changed

Answers

I think it is "energy cannot be destroyed but it can change forms".

The top of a 240 foot vertical tower is to be anchored by cables that make an angle with a measure of 54 degrees with the ground. How long must each cable be? ___ feet
How far from the base of the tower should the anchors be placed? ___ feet

Answers

Each cable must be 300 feet long and the base must be at 179 feet.

The vertical tower, cables and distance between ground and tower will form a right angled triangle. So, we will use Pythagoras theorem to find the length of each cable and base.

sin 54 = height of vertical tower ÷ length of cables

sin 54 = 240 ÷ length

Length = 240/sin 54

Length = 240/0.8

Length = 300 foot

tan 54 = height of vertical tower ÷ distance of base of tower

Distance = 240/tan 54

Distance = 240/1.38

Distance = 173.9 foot

Hence, length should be 300 foot and distance should be 173.9 foot.

Learn more about Pythagoras -

https://brainly.com/question/343682

#SPJ4

For a particular nonlinear spring, the relationship betweem the magnitude of the applied force F and the resultant displacement x from equilibrium is given by the equation F = k x^2 What is the amount of work done by stretching the spring a distace x0? A) kx0^3 B) (1/2)kx0 C) (1/2)kx0^3 D) (1/3)kx0^2 E) (1/3)kx0^3

Answers

To get the work, you have to integrate the force as a function of [tex]$x$[/tex] from zero displacement to Xo

[tex](Integral of) $\mathrm{k} \mathrm{x}^{\wedge} 2 \mathrm{dx}$ from 0 to $\mathrm{Xo}_{\mathrm{o}}=(1 / 3) \mathrm{k}\left(\mathrm{Xo}^{\wedge}\right)^{\wedge} 3$[/tex]

The work done by stretching the spring to the given distance is [tex]W=\frac{k x_0}{3}[/tex]

The given parameters:

- Applied force on the spring [tex]$=F$[/tex]

- Extension of the spring [tex]$=x_0$[/tex]

The work done by stretching the spring to the given distance is calculated as follows;

[tex]W=\frac{k x_0}{3}[/tex]

[tex]$$\begin{aligned}& W=\int_{x_a}^{x_b} F d x \\& W=\int_{x_a}^{x_b} k x^2 d x \\& W=k \int_{x_a}^{x_b} x^2 d x \\& W=k\left[\frac{x^3}{3}\right] \\& W=k\left[\frac{x_b-x_a}{3}\right] \\& W=k\left[\frac{x_0-0}{3}\right] \\& W=\frac{k x_0}{3}\end{aligned}[/tex]

Thus, the work done by stretching the spring to the given distance is

[tex]W=\frac{k x_0}{3}[/tex]

measure of energy transfer that occurs when an object is moved over a distance by an external force at least part of which is applied in the direction of the displacement.

To learn more about work done visit:

https://brainly.com/question/13662169

#SPJ4

two small spheres carry electric charges of equal magnitudes. there are equally spaced points (a , b , and c) which lie along the same line.

Answers

The right response is option number B. Electric field can be represented by a vector arrow because of vector quantity. To calculate the size of the electric field, we can apply the equation E=k |Q| r2E=k|Q| r2.

How can you determine an electric field's direction at a specific location?

The electrical force acting on a positive test charge at a location in space has the same direction as the electrical field there.

What three types of electric fields are there?

Electric field components can be found in electromagnetic waves , X-rays, radio waves, and microwaves. Within a conductor that is carrying current, there is an external electric field. Charges create electrical fields.

Learn more about uv light here:

https://brainly.com/question/23342892

#SPJ4

Students will design an experiment to determine how the magnitude of the force on a segment of straight, current-carrying wire depends on the length of the wire segment and on the strength of the magnetic field. Which of the following experimental procedures will allow the students to determine both of these relationships? A Making measurements of the force on several different straight segments of wire, increasing the length of the wire and increasing the magnetic field strength with each measurement. B Making measurements of the force on several different straight segments of wire, increasing the length of the wire and decreasing the magnetic field strength with each measurement с Making measurements of the force on several different straight segments of wire, keeping the length of the wire constant while increasing the magnetic field strength with each measurement. D Making measurements of the force on several different straight segments of wire, increasing the length of the wire while keeping the magnetic-field strength the same with each measurement, then repeating the measurements while decreasing the length of the wire and increasing the magnetic field strength with each measurement E Making measurements of the force on several different straight segments of wire, increasing the length of the wire while keeping the magnetic-field strength constant with each measurement, then repeating the measurements while keeping the length of the wire constant while increasing the magnetic field strength with each measurement.

Answers

The experimental procedures that will allow the students to determine both of these relationships is option E:

 Making measurements of the force on several different straight segments of wire, increasing the length of the wire while keeping the magnetic-field strength constant with each measurement, then repeating the measurements while keeping the length of the wire constant while increasing the magnetic field strength with each measurement.

What happens to the magnetic field when the length of wire increases?

The formula  F = IL x B calculates the magnetic force acting through a magnetic field on a current-carrying wire. The magnetic field acts on a wire when a current is conducted through it in a direction that is perpendicular to both the magnetic force.

By increasing the amount of current flowing through the wire, the magnetic field's strength can be enhanced. As you get further from the wire, the strength gets weaker. If the amount of current flowing through it stays constant, its length and thickness have no bearing.

Therefore, the length of the wire in the magnetic field has an impact on the magnetic force's strength as well. The force acting on a wire increases with wire length in a magnetic field.

Learn more about experimental procedures from

https://brainly.com/question/17274244
#SPJ1

according to the maxwellian speed distribution, as the temperature increases the number of molecules with speeds within a small interval: increases decreases increases at high temperatures and

Answers

According to the Maxwellian speed distribution, as the temperature increases, the number of molecules with speeds within a small interval decreases.

Temperature is a bodily quantity that expresses the perceptions of hotness and coldness. Temperature is measured by using a thermometer. Thermometers are calibrated in diverse temperature scales that have been trusted by various reference points and thermometric materials for definition.

Temperature plays a vital role in hospital treatment,  food, drinks, and agriculture. Our health is often reliant upon the temperature in many methods as properly. Preserving the right temperature degrees in cold garage areas is crucial.

The SI unit of temperature as in line with the international machine of units is Kelvin that's represented by the symbol K.

Learn more about Temperature here:-https://brainly.com/question/28752847

#SPJ4

how to calculate the frequencies and wavelengths of standing waves on a string, in an open-open pipe, or a closed-open pipe.

Answers

If you are aware of the separation between nodes and antinodes, the string (or pipe) length, and the harmonic that is present.

What is harmonic?

A harmonic wave, such as a sinusoidal wave, has a frequency that is an integer multiple of the fundamental frequency, or the frequency of the initial periodic signal. The first harmonic of the original signal is also referred to as that; higher harmonics are the other harmonics.

Use this equation if you know the separation between nodes and antinodes:

2

λ \s​ \s =D

D stands for the separation between adjacent nodes or antinodes.

Also

The formula v = f gives the wavelength. Since the frequency is fixed, the only way to alter the wavelength of the waves is to alter their speed.

To learn more about harmonic visit

https://brainly.com/question/9253932

#SPJ4

if two objects are falling on with a small mass and the other with a large mass where is the center of mass

Answers

Various objects' respective centers of mass. The center of mass of symmetrical, homogeneous objects is located at the centroid of those objects.

Rings, circles, squares, cuboids, and other similar shapes are examples of symmetrical and uniform things.

Due to this air resistance, Galileo discovered that heavier or more dense things fall more quickly than less dense ones. The feather falls more slowly due to air resistance.

Gravitational acceleration is unaffected by mass in any quantifiable sense. The two amounts don't depend on one another. Only when forces other than gravity are at play do light items accelerate more slowly than heavy objects.

To know more about centers of mass

https://brainly.com/question/15362488

#SPJ4

Design a parallel RLC circuit (see (Figure 1)) with a resonant radian frequency of 5000 rad/s. Take that L 10 mH.a) Find the value of C Express your answer to three significant figures and include the appropriate units. C= 4.00 μFb) Find the value of R so that the response is critically damped. Express your answer to three significant figures and include the appropriate units R- 25.0 Ω

Answers

The value of R so that the response is critically damped using the equation is 25.0Ω.

What is Farads?

Farads is the unit of measure for capacitance, which is the amount of electrical charge stored for a given voltage. Farads can be used to measure the amount of energy stored in a capacitor, which is made up of two conductive plates separated by an insulating material. The higher the capacitance, the more energy can be stored in a given capacitor. Farads are named after Michael Faraday, the British scientist who discovered the relationship between electricity and magnetism.

The resonant frequency of an RLC circuit is given by the equation:
ω_r=1/sqrt(LC)
where ω_r is the resonant frequency in rad/s, L is the inductance in Henries, and C is the capacitance in Farads.
Given the resonant frequency of 5000 rad/s and the inductance of 10 mH, we can calculate the capacitance as follows:
C=1/(ω_r^2*L)
C=1/(5000^2*0.01)
C=4.00μF
We can find the value of R so that the response is critically damped using the equation:
R=2*sqrt(L/C)
R=2*sqrt(0.01/4.00)
R=25.0Ω

To learn more about Farads
https://brainly.com/question/24175851
#SPJ1

NAME THAT DISORDER
For the following scenarios, identify the psychological disorder indicated (if there is definitely a disorder). Indicate the reason why you chose that diagnosis (i.e., what are the symptoms/behaviors presented). According to your textbook (or any other source you would like to use), what might be an appropriate course of treatment (use all that could apply) for the diagnosis you chose. Try to be as specific as possible.
Homework assignment is due prior to the start of class on WEDNESDAY, DECEMBER 14TH.
1. When Lila saw the policeman turn on his flashing blue lights and motion her to pull over, her heart rate increased, her mouth felt dry, and she quite nervous about what was going to happen.
2. Although doctors could find no evidence of brain damage, Ralph could not remember driving the car that was involved in the accident that resulted in the deaths of his wife and son.
3. When Sammi saw Andrea three months ago, Andrea was too busy to talk. She was involved in all kinds of plans for a vague new business that she was sure to make her a fortune. But just last week, Sammi heard that Andrea was feeling very low, was sleeping most of the time, and had given up all plans to do just about anything.
4. Timothy was having an increasingly difficult time completing his reading assignments. He was becoming unsure if what he was reading was really there or if his mind was making things up. This was not helped by the “kryptonite rays” being emitted by the smoke detector and the hidden camera spying on him from behind the mirror in his room.
5. Ever since her home was burglarized, Maria double checks to make sure the doors are locked before going to bed.
6. Randall is so afraid of bacteria that each day he must wash each dish and utensil three times in scalding, soapy water and then rinse each dish exactly twenty seconds. If he deviates from this ritual in the slightest way, he must wash all the dishes and utensils again.
7. Everything was hopeless. Francine felt that because she was such a horrible wife and mother she felt she didn’t deserve to live and that her husband should find a better person to be with. She cried all the time and couldn’t escape her sadness.
8. When the helicopter crash landed, Yusef was horrified. He and he pilot were injured and the gas tank could blow at any time. Although he had a broken arm, Yusef was able to pull both himself and the unconscious pilot out of the plane and to safety before it blew. But ever since that time, the unbroken arm he used to save himself and the pilot has been ‘paralyzed’ and Yusef does not appear to be too upset about it.
9. Carlos, who is turning 40, is very worried about having about having a heart attack since his brother, father, and grandfather died of heart attacks in their 40s.
10. On the way home, Celia found herself having difficulty breathing, and her heart was pounding so hard that she could barely see clearly. She pulled off the road where she continued to hyperventilate, feel dizzy, and have sweaty palms. After about 10 minutes or so, her breathing returned to normal and she continued on her drive home.

Answers

Where the exercise here is to name the disorder, note that:

Lila might be having a panic attack.Ralph might be suffering from dissociative amnesia.Andrea might be suffering from depression.Timothy might be suffering from psychosis.Maria might be suffering from an anxiety problem.Randall might be suffering from an anxiety illness.Francine might be suffering from depression.Yusef might be suffering from a dissociative disorder.Carlos might be suffering from an anxiety problem.Celia might be having a panic attack.

What are the possible treatments or remedies for panic attacks?

It should be mentioned that medication (such as antidepressants or benzodiazepines) and/or counseling may be used to treat a panic disorder such as cognitive-behavioral therapy.

A suitable course of treatment for dissociative disorders may involve counseling (such as cognitive-behavioral therapy, trauma-focused therapy, or psychodynamic therapy) and/or medication.

The focus of psychodynamic therapy is on unconscious processes as they show in the client's current behavior. Client self-awareness and knowledge of the effect of the past on present behavior are the aims of psychodynamic therapy.

Learn more about Dissociative disorder:
https://brainly.com/question/20430933
#SPJ1

(a) Seismographs measure the arrival times of earthquakes with a precision of 0.100 s. To get the distance to the epicenter of the quake, they compare the arrival times of S- and P-waves, which travel at different speeds. Figure 16.48) If S- and P-waves travel at 4.00 and 7.20 km/s, respectively, in the region considered, how precisely can the distance to the source of the earthquake be determined?(b) Seismic waves from underground detonations of nuclear bombs can be used to locate the test site and detect violations of test bans. Discuss whether your answer to (a) implies a serious limit to such detection. (Note also that the uncertainty is greater if there is an uncertainty in the propagation speeds of the S- and P-waves.)

Answers

A. 0.900 km

B. This uncertainty is small enough that it's possible to be certain which country conducted a nuclear test. Uncertainty in wave propagation speed will create additional uncertainty.

The study of earthquakes and seismic waves that travel through and around the Earth is known as seismology. A scientist who investigates earthquakes and seismic waves is known as a seismologist.

Seismic waves are caused by the sudden movement of materials  within the Earth, such as slip along a fault during an earthquake. Volcanic eruptions, explosions, landslides, avalanches, and even rushing rivers can also cause seismic waves. Seismic waves travel through and around the Earth and can be recorded with seismometers.

There are several different kinds of seismic waves, and they all move in different ways. The two main types of waves are body waves and surface waves. Body waves can travel through the Earth's inner layers, but surface waves can only move along the surface of the planet like ripples on water. Earthquakes send out seismic energy as both body and surface waves.

learn more about seismic waves here:

https://brainly.com/question/26404022

#SPJ4

(a)  The distance to the source of the earthquake = 0.4 km.

(b) 0.72 km

Seismographs:

An instrument used to record earthquake waves.

Given that,

             Seismographs measure the arrival times of earthquakes with a precision of 0.100 s.

Then the distance moved by the S waves in the given time interval is

                                     [tex]d_{s} =(velocity)_{s} t[/tex]

                                     [tex]d_{s}= (4km/s)(0.1s)[/tex]

                                     [tex]d_{s}=0.4km[/tex]

Then the distance moved by the P waves in the given time interval is

                                     [tex]d_{p} =(velocity)_{p} t[/tex]

                                     [tex]d_{p}=(7.2km/s)(0.1s)[/tex]

                                     [tex]d_{p}=0.72km[/tex]

So the distance to the source of an earthquake is

                                     [tex]d=d_{s}-d_{p}[/tex]

                                     [tex]d=(0.72km)-(0.4km)[/tex]

                                     [tex]d=0.32km[/tex]

Hence,

         (a)  The distance to the source of the earthquake = 0.4 km.

         (b) 0.72 km

Learn more about Seismographs here

https://brainly.com/question/14704742

#SPJ4

Calculate the internal energy of 1.2moles of steam at 177degree

Answers

Answer:

18447 J

Explanation:

To calculate the internal energy of steam at a given temperature, we need to know the specific heat capacity of steam and the enthalpy of vaporization. The specific heat capacity of steam at a constant pressure is approximately 2.08 J/g*K, and the enthalpy of vaporization (latent heat) at 100°C is 2257 kJ/kg.

We can use the following equation to calculate the internal energy of steam at a given temperature:

U = m * Cp * (T - T_b) + m * L

Where U is the internal energy, m is the mass of the steam, Cp is the specific heat capacity of steam, T is the temperature of the steam, Tb is the boiling temperature of the steam, and L is the enthalpy of vaporization.

Since we are given the amount of steam in moles (1.2 moles) and the temperature (177°C), we can convert the moles of steam to mass using the molar mass of water (18 g/mol). The boiling temperature of water at standard atmospheric pressure is 100°C, so we can use this value for Tb.

First, we need to convert the temperature from degrees Celsius to kelvins:

T = 177°C + 273 = 450 K

Then, we can calculate the mass of the steam:

m = 1.2 moles * 18 g/mol = 21.6 g

Substituting these values into the equation for internal energy, we get:

U = 21.6 g * 2.08 J/g*K * (450 K - 273 K) + 21.6 g * 2257 kJ/kg

Solving for the internal energy, we get:

U = 18,447 J

Therefore, the internal energy of 1.2 moles of steam at 177°C is approximately 18,447 J.

two objects of unequal masses, m and m (m > m), are connected by a very light cord passing over an ideal pulley of negligible mass. when released, the system accelerates, and friction is negligible.

Answers

M will experience a net downward force, which will cause it to accelerate downhill, while M will experience a net upward force, which will cause it to accelerate upward.

As the same string is attached to both the blocks, it applies the same upward force = tension in the string.

Hence the length of the upward arrows should be the same.

Secondly, the weight of m is lesser than M. Hence, the arrow below m will be smaller than that below M.

This also means that the net force on M will be downwards, and hence, it will accelerate downwards and that on m will be upwards and hence it will accelerate upwards.

To read more about force, visit https://brainly.com/question/13191643

#SPJ4

TRUE OR FALSE in physics, every physical quantity is measured with respect to a unit. time is measured in seconds, length is measured in meters, and mass is measured in kilograms. knowing the units of physical quantities will help you solve problems in physics.

Answers

The unit of G is found out to be m³/kg * s².

The force of gravitational attraction is represented by the equation.

F = (G m₁ m₂)/r²

where,

F is the magnitude of the gravitational attraction on either body

m₁ and m₂ are the masses of the bodies,

r is the distance between them

G is the gravitational constant

We need to find the unit of G,

G = (F * r²)/(m₁ m₂)

Let us place the units for the above formula,

G = (N * m²)/kg²

N = kg m/s²

G = (kg * m * m²)/ kg² * s²

G = m³/kg * s²

Thus, the correct option is m³/kg * s².

The question is incomplete. The complete question is 'Gravity causes objects to be attracted to one another. This attraction keeps our feet firmly planted on the ground and causes the moon to orbit the earth. The force of gravitational attraction is represented by the equation.

F= Gm1 m2 /r^2

where F is the magnitude of the gravitational attraction on either body, m1 and m2 are the masses of the bodies, r is the distance between them, and G is the gravitational constant. In Sl units, the units of force are kg m/s^2, the units of mass are kg, and the units of distance are m. For this equation to have consistent units, the units of G must be which of the following?

a. kg^3/ms^2

b. kgs^2/m^3

c. m^3/kgs^2

d. m/kgs^2

To know more about units:

https://brainly.com/question/20984485

#SPJ4

a hydraulic lift (jack) has two pistons, one large and one small. the pistons are at the same elevation. if it is equilibrium, which piston exerts the greatest force

Answers

The force exerted at the large piston will be double in magnitude in comparison with the force applied at the smaller piston.

We know, according to the pascal's law,

The pressure applied at any point in the incompressible fluid is equal in magnitude at each and every point.

So,

P = Force/Area

Where P is pressure,

If pressure is same, then we can write,

F₁/A₁ = F₂/A₂

Where,

F₁ is the force applied at the small piston,

A₁ is the area of the smaller piston,

F₂ is the force at the larger piston,

A₂ is the area of the larger piston,

It is also given that, area if the larger piston is two times the area of the smaller piston so,

A₂ = 2A₁

So, putting the values we get,

F₂/F₁ = 2

So, F₂ = 2F₁

It means that the force exerted by the larger piston will be double in magnitude.

To know more about Pascal's Law:

brainly.com/question/4262025

#SPJ4

The table lists the kinetic energy of a 4.0 kilogram mass as it travels in a straight line for 12.0 seconds.

Time
(seconds) Kinetic Energy
(joules)
0.0 0.0
2.0 8.0
4.0 18
6.0 32
10.0 32
12.0 32

Calculate the speed of the mass at 10.0 seconds.
m/s

Answers

So the speed of object of mass 4 Kg and kinetic energy of 32 j at 10 second is 4 m/s.

What is kinetic energy?

Kinetic energy is the energy that an object has when it moves or changes its position. As long as an object is moving at the same speed, it maintains the same kinetic energy.

The kinetic energy of an object is calculated from the object's velocity and mass. As can be seen from the equation below, velocity is quadratic and can have a large effect on kinetic energy.

KE = ¹/₂ mv²

v = √(2KE/m)

Where, v = velocity

M = Mass of object (4.0 Kg)

KE = Kinetic energy (32 j)

v = √(2 × 32/4)

v = √16

v = 4 m/s

To know more about kinetic energy click-

https://brainly.com/question/25959744

#SPJ1

if an object producing sound is moving away from you, you would observe a wavelength than an object moving toward you. group of answer choices

Answers

If an object producing sound is moving away from us, the wavelength of the sound heard is longer than the actual wavelength. The conclusion is from the concept of Doppler effect.

What is the Doppler effect?

The Doppler's effect is a phenomenon when the source of a wave and an observer move relative to each other, the frequency heard is not the same with the actual frequency.

The equation of the Doppler effect is

f₀ = [(v ± v₀)/(v ± vs)] × fs

Where

f₀ = observer frequency of soundv = speed of sound waves (340 m/s)v₀ = observer velocityvs = source velocityfs = actual frequency of sound waves

Note:

v₀ (+) if the observer moves closer to the sound source.vs (+) if the sound source moves away from the observer.

When an object producing sound is moving away from us, the frequency of the sound we heard changed.

Let's say we are at rest, it means v₀ = 0. The sound source is moving away makes vs (+).

With the Doppler's effect, we get

f₀ = [(v+0) / (v+vs)] × fs

f₀/fs = v/(v+vs)

v < v+vs

f₀ < fs

The frequency of sound we heard is lower that the actual frequency.

The wavelength is inversely proportional to the frequency. It is described in the equation:

λ = c/f

It means that the lower the frequency, the longer the wavelength.

Hence, the phenomenon which the wavelength of the sound we heard is longer than the actual wavelength when the sound source is moving away from us is called the Doppler's effect.

Here is the group of answer choices:

(a) Band width

(b) Doppler's effect

(c) Sound refraction

(d) Vibrations

Learn more about Doppler's effect here:

https://brainly.com/question/29672712

#SPJ4

When the turntable is turned on and rotates at 45.0 rev/min, calculate the centripetal force needed to keep the fly from slipping?

Answers

The centripetal force needed to keep the fly from sleeping will be zero point 0.00176 Newton in magnitude.

The mass of the fly is 2 gram and it is selling itself on a phonograph turntable.

The fly is at a distance of 4 cm away from the center of the phonograph turntable and when the turntable is turned on and retreats with 45 Revolution per minute the centripetal force that would be working on the fly will be given by,

F = Mw²R

Where,

M is mass of the fly,

w is the angular speed of the fly and,

R is the radius of the turnable.

Putting all the values,

F = 0.002×(4.7)²×0.04

F = 0.00176N.

So, a centripetal force of magnitude 0.00176 Newton will be required in order to keep the fly from slipping.

To know more about centripetal force, visit,

https://brainly.com/question/20905151

#SPJ4

Complete question- A fly of mass 2.00 g is sunning itself on a phonograph turntable at a location that is 4.00 cm from the center. When the turntable is turned on and rotates at 45.0 rev/min, calculate the centripetal force needed to keep the fly from slipping?

based on the graphic, in what part of the electromagnetic spectrum does vegetation have the strongest response?

Answers

Between 400 nm and 700 nm of the electromagnetic spectrum, vegetation has the strongest response.

The electromagnetic spectrum travels in waves and spans an extensive spectrum from very long radio waves to very brief gamma rays. The human eye can simplest come across only a small portion of this spectrum called visible light.

In order from maximum to lowest power, the sections of the EM spectrum are named: gamma rays, X-rays, ultraviolet radiation, visible mild, infrared radiation, and radio waves.

In a tumbler, the purple mild travels the fastest, and the violet light travels the slowest of all seven hues. Velocity and wavelength are without delay proportional.

Learn more about Electromagnetic spectrum here:-https://brainly.com/question/23423065

#SPJ4

A 2.2-mm-diameter and 10-m-long electric wire is tightly wrapped with a 1-mm-thick plastic cover whose thermal conductivity is k = 0.15 W/m.K. Electrical measurements indicate that a current of 13 A passes through the wire and there is a voltage drop of 8 V along the wire. If the insulated wire is exposed to a medium at T = 30°C with a heat transfer coefficient of h = 24 W/m2.K, determine (a) the temperature (in °C) at the interface of the wire and the plastic cover in steady operation. Electrical wire To = 30°C Insulation 10 m (c). Continue the previous questions. Determine if doubling the thickness of the plastic cover will increase or decrease this interface temperature. will increase interface temperature because of heat transfer from interface decrease will decrease interface temperature because of heat transfer towards interface decrease will decrease interface temperature because of heat transfer from interface increase will increase interface temperature because of heat transfer towards interface increase will have no effect on interface temperature

Answers

Doubling the thickness of the plastic cover increases the rate of heat loss and decreases the interface temperature.

Given:

The diameter of the electric wire t=1mm

The diameter of plastic cover ro=1+1.1=2.1

Internal conductivity of plastic cover k=0.15w/MK

the current passed through circle I=13A

voltage drop v=8v

temperature T=30c

Heat transfer fluid h=24w/m^2k

Let To be the temperature of the wire and T1 is the temperature of the plastic cover.

the heat generated  Q=>v*I=13*8=104 watt

Now the heat generated is connected and converted through wire

Q= To-T1/ln(ro/rc)/2pi*KL+1/hAo

104=To-30/ln(2.2/1.1)/2pi*0.15*10+1/24*20*0.00021*16

104=To-30/0.38439

To=69.9768c

To=70c

The temperature at the Interface of the wire is 70c

Now, the heat generated is connected to the wire

Q=To-T1/ln(ro/rc)/2piKL

104=70-T1/ln(2.1/1.1)/2pi*0.15*10

7.13536=10-T1

T1=6.2864c

The critical radius of Isolation:

rc=k/h=0.5/24

rc=6.25*10^-3m

rc=6.25mm

Now the thickness of isolation is increased to double

ro=1.1+2=3.1mm

Now,rc>ro ie critical radius of isolation is greater than the outer radius of the circle.

∴doubling the thickness of the plastic cover increases the rate of heat loss and decreases the interface temperature.

To know more about the critical radius of Isolation:

https://brainly.com/question/13646773

#SPJ4

what evidence does this graph provide to support the law of conservation of energy? Provide numerical data.

Answers

Explanation:

1. in any time the sum of Kinetic and Potential energies is the same value;

2. there are 4 points in interval from 0 to 50 seconds (see the attachment) and:

- when t=0, then Kinetic energy is 0 and the Potential one is 500 [J];

- when t=20, then Kinetic energy is 200 and the Potential one is 300 [J];

- when t=25, then Kinetic energy (250[J]) equals the Potential one(250[J]);

- when t=50, then Kinetic energy is 500 and the Potential one is 0.

he is driving on a motorcycle at 18 m/s as he passes over the top of a hill whose radius of curvature is 142m

Answers

The magnitude of centripetal force is 684.50 N and the magnitude of normal force is 2258.5 N.

Force is an external influence that can change the velocity or motion of an object.

It can also be defined as the product of mass and acceleration.Mathematically, force F = m*a

Speed of the motorcycle = v = 18 m/s

Radius of curvature of the hill top = r = 142 m

Total mass of the motorcycle and driver = m = 300 kg

A centripetal force is a force acting on an object in a curvilinear motion toward the axis of rotation or center of curvature.

Mathematically, it is Fc = (mv²)/r

Fc = (300 * 18²) / (142)

Fc = 684.50 N

Normal force (N) acting on the motorcycle can be calculated by the equation:

Fc = mg - N

684.50 = (300 * 9.81) - N

N = 2943 - 684.5

N = 2258.5 N

Therefore the magnitude of centripetal force is 684.50 N and the magnitude of normal force is 2258.5 N.

The question is incomplete, the complete question is "he is driving on a motorcycle at 18 m/s as he passes over the top of a hill whose radius of curvature is 142m. The mass of the motorcycle and driver is 300 kg. Find the magnitudes of the following.

a) magnitude of centripetal force

b) magnitude of normal force

To know more about force,

https://brainly.com/question/15343432

#SPJ4

the use of the doppler effect in the study of astronomy

Answers

Answer: One application

Two long parallel wires are placed side by side on a horizontal table. The wires carry equal currents in the same direction. Which of the following statements are true? Check all that apply. The magnetic field is a maximum at a point midway between the two wires The magnetic force between the two wires is attractive. The magnetic force between the two wires is repulsive. The magnetic field at a point midway between the two wires is zero.

Answers

When two long parallel wires are placed side by side on a horizontal table and the wires carry equal currents in the same direction, the magnetic field at a point midway between the two wires is zero.

When two parallel wires carry current in the same direction, they exert equal and opposite attractive forces on each other. Thus, the net magnetic field at midpoint is zero. While, Two parallel wires carrying current in opposite directions repel and try to move away from each other.

Similarly, if you have two parallel wires with current traveling in opposite directions, as you do in the series circuit, then the magnetic fields of the two wires will be traveling in the same direction at the point at which they intersect, and therefore repel each other.

To know more about Magnetic Field:

https://brainly.com/question/13103888

#SPJ4

A 2.0 kg mass attached to an ideal spring oscillates horizontally with an amplitude of 0.15 m.
N
The spring constant is 85
N/m.
What is the period of the mass’s motion?

Answers

Anything parallel to the horizon is called horizontal.

What is the period of the motion?The period of the object's motion is defined as the time for the object to complete one full cycle. Being a time, the period is measured in units such as seconds, milliseconds, days or even years. The standard metric unit for period is the second. An object in periodic motion can have a long period or a short period.Given that,The period of a spring-mass system is proportional to the square root of the mass and inversely proportional to the square root of the spring constant.“Period” is rooted in the Greek words “peri” and “hodos” (periodos) meaning “around” and “way/path.” This eventually turned into the Latin “periodus” meaning “recurring cycle.” Use of the English term “period” to describe menstruation began in the early 1800s (1).A mass m suspended by a wire of length L is a simple pendulum and undergoes simple harmonic motion for amplitudes less than about 15º. The period of a simple pendulum is T=2π√Lg T = 2 π L g , where L is the length of the string and g is the acceleration due to gravity.

The mass attached to the spring, m = 1.5 kg

The amplitude of the spring, A = 0.3 m

The spring constant of the spring, k = 85 N/m

We need to find the period of the mass's motion. The time period in spring mass system is given by :

[tex]T=2\pi \sqrt{\frac{M}{K} }[/tex]

[tex]T=2\pi \sqrt{} \frac{1.5}{85}[/tex]

[tex]T=0.83s[/tex]

So, the period of the mass's motion is 0.83 seconds.

To learn more about horizontal refer to:

https://brainly.com/question/29678567

#SPJ1

Answer: 0.96s

Explanation:

Khan

(1) A table tennis ball is dropped
onto the floor from a height of
4m and it rebounds to a height of
3m. If the time of contact with the floor is 0.01s, what is the magnitude and direction of the acceleration during the contact.

Answers

Answer:

Here, h1=4.00m,h92)=3.00m,Delta t =0.01 s.Letv1 be the velocity of the ball (actind downwards) just before striking the floor an dv20 be the velocity of the ball (acting upwaeds) ust after striking the floor. Then, change in velocity of the ball in time Δtv2−(−v1)v2+v1

:. acceleration, a=v2+v1Δt ..(i)

When body falls from height h1,

then u=o,v1,a=gandS=h1

As, v21=u2+2aS,

:. v_(1) ^(2) =0 + g h_(10 or v12–√gh1

Taking motion of the ball after striking the floor, then u=v2,v=0,a=−g,S=h2

As, v2=u22as,∴v21=0+2gh1orv_(1) =sqrt 32 g h_(1)Tak∈gmotionoftheballa>erstrik∈gthe⌊,⌋thenu=v_(2), v=0, a=- g, S=h_(2)As,v2=u2+2aS,wehave0 = v_(2)^(2) +2 (-g) h_92) otr v2=2–√gh2

Putting values in (i) we get,

a=2–√gh2+2–√gh1Δt)

a=2–√×9.8×3+2–√×9.8×40.01

= 1652m/s2.

Explanation:

A wire loop, 2 meters by 4 meters, of negligible resistance is in the plane of the page with its left end in a uniform 0.5-tesla magnetic field directed into the page, as shown above. A 5-ohm resistor is connected between points X and Y. The field is zero outside the region enclosed by the dashed lines.

Answers

If wire loop is being pulled to the right with a constant velocity of 3 meters per second , then the potential difference induced between points X and Y is 3V .

it is given that a 5Ω resistor is connected between points X and Y ;

the magnetic field (B) = 0.5 ;

length of wire (l) [tex]=[/tex] 2 ;

velocity of the wire loop (v) = 3 m/s ;

the potential difference will be induced because charge separation on the vertical hand wire of wire loop.

Points X and Y are the same as the top and bottom of left wire.

The EMF(potential difference) induced in wire is given by

EMF = B*l*v

substituting the values ,

we get  

= (0.5)(2)(3) = 3V

Therefore , the induced potential difference between points X and Y is 3V .

The given question is incomplete , the complete question is

A wire loop, 2 meters by 4 meters, of negligible resistance is in the plane of the page with its left end in a uniform 0.5-tesla magnetic field directed into the page. A 5-ohm resistor is connected between points X and Y. The field is zero outside the region enclosed by the dashed lines. The loop is being pulled to the right with a constant velocity of 3 meters per second. Make all determinations for the time that the left end of the loop is still in the field, and points X and Y are not in the field.

Determine the potential difference induced between points X and Y.

Learn more about Magnetic Field here

https://brainly.com/question/27679280

#SPJ4

In an experiment, students hold a closed, rectangular loop of wire of mass mm, width LyLy, and length LxLx at rest above a very long wire that has a current II. The current-carrying wire is aligned along the origin, as shown in the diagram. The students release the loop from rest, and the loop falls in a direction perpendicular to the current-carrying wire. The students use an ammeter to measure the current in the loop as the loop passes very close to the wire but does not touch it. Which of the following statements best describes the experimental results and provides the principles that explain the results?
The induced current will be counterclockwise when the center of the loop is above the wire and clockwise when the center of the loop is below the wire. This is because the net magnetic field flux inside the loop is out of the page when the center of the loop is above the wire and is into the page when the center of the loop is below the wire.
Answer A: The induced current will be counterclockwise when the center of the loop is above the wire and clockwise when the center of the loop is below the wire. This is because the net magnetic field flux inside the loop is out of the page when the center of the loop is above the wire and is into the page when the center of the loop is below the wire.
A
The induced current will be clockwise until the top of the loop reaches the wire and will be counterclockwise when the top of the loop goes below this point. This is because the induced current is proportional to the rate of change of the magnetic field flux, which increases when the top of the loop is above the wire and decreases when the top of the loop is below the wire.
Answer B: The induced current will be clockwise until the top of the loop reaches the wire and will be counterclockwise when the top of the loop goes below this point. This is because the induced current is proportional to the rate of change of the magnetic field flux, which increases when the top of the loop is above the wire and decreases when the top of the loop is below the wire.
B
The induced current will always be clockwise as the loop falls. This is because the induced current is determined by the change of the magnetic flux inside the loop. The net magnetic flux is out of the page and increasing when the center of the loop is above the wire and into the page and decreasing when the center of the loop is below the wire.
Answer C: The induced current will always be clockwise as the loop falls. This is because the induced current is determined by the change of the magnetic flux inside the loop. The net magnetic flux is out of the page and increasing when the center of the loop is above the wire and into the page and decreasing when the center of the loop is below the wire.
C
The induced current will be clockwise until the bottom of the loop reaches the wire and will be counterclockwise when the bottom of the loop goes below this point. This is because the induced current is proportional to the rate of change of the magnetic field flux, which increases when the bottom of the loop is above the wire and decreases when the bottom of the loop is below the wire.
Answer D: The induced current will be clockwise until the bottom of the loop reaches the wire and will be counterclockwise when the bottom of the loop goes below this point. This is because the induced current is proportional to the rate of change of the magnetic field flux, which increases when the bottom of the loop is above the wire and decreases when the bottom of the loop is below the wire.
D
The induced current will always be counterclockwise as the loop falls. This is because the induced current is determined by the change of the magnetic flux inside the loop. The net magnetic flux is out of the page and decreasing when the center of the loop is above the wire and into the page and increasing when the center of the loop is below the wire.

Answers

The correct option is that C. The induced current will be clockwise until the bottom of the loop reaches the wire and will be counterclockwise when the bottom of the loop goes below this point. This is because the induced current is proportional to the rate of change of the magnetic field flux, which increases when the bottom of the loop is above the wire and decreases when the bottom of the loop is below the wire.

What is the current about?

According to Faraday's law, the magnetic flux change rate in a circuit equals the magnitude of the induced EMF in the circuit. Additionally inversely correlated with the rate of change of magnetic flux in the circuit is hens induced current.

Lenz's law states that an induced current will flow in the opposite direction of the cause that is causing it. When the bottom of the loop is below this point, the induced current is counterclockwise until the bottom of the loop reaches the wire. This is because the magnetic field flux changes more quickly when the bottom of the loop is above the wire because the induced current is proportional to this

Learn more about current on:

https://brainly.com/question/24858512

#SPJ1

Other Questions
Solvey=-2 xy=-9 x+21 although religion is notoriously difficult to define, what are four components or aspects of religion that most authorities appeal to when attempting to define the term? a teacher has a grading policy for a group assignment such that each team can earn up to 100 points, which will then be divided between four team members based on the quality of each team member's contribution to the group. this situation would be what type of game for team members? Which type of leadership is also known as delegative leadership?O AuthoritarianO ParticipativeO DemocraticO Laissez Faire after the government imposed a $0.20 per gallon tax on gasoline, the price of a gallon of gasoline increased from $1.00 to $1.15. which of the following statements is true? when a company sales a product for a price that is less than the cost of production the product, it is engaging in. today, organizations can harness data to leverage their employee data to promote, improve, and to assist with what? functional regions are widely accepted by all groups and tend to be more permanent separations true or false gradle using insecure protocols with repositories, without explicit opt-in, is unsupported. allowinsecureprotocol 184) you are standing on a skateboard, initially at rest. a friend throws a very heavy ball toward you. 184) you can either catch the object or deflect the object back toward your friend (such that it moves away from you with the same speed as it was originally thrown). what should you do in order to maximize your speed on the skateboard? male zebra finches with more brightly colored beaks have greater reproductive success. red deer males fight with their antlers to compete for females. northern elephant seal males fight to establish territories on breeding beaches. male giraffes wrestle with their necks over access to females. The syntax for a left outer join is a) SELECT column-list FROM table1 OUTER JOIN table2 LEFT WHERE join-condition b) SELECT column-list FROM table1 LEFT (OUTER] JOIN table2 ON join-condition c) SELECT column-list WHERE LEFT table1 = table d) SELECT column-list FROM table1 LEFT table2 (JOIN]WHERE join-condition How many rows would be returned from a cross join of tables A and B, if A contains 3 rows and B contains 5? a) 3 b) 8 c) 15 d) 30 7. A 50 kg athlete runs and grabs a 10.0 m rope and swings to a maximum height of 1.8 m abovethe ground. A second athlete, who has a mass of 100. kg runs at the same speed, v, and grabs a5.0 m rope. What maximum height will the 100. kg athlete swing to? Assume the mass of theropes and air resistance are negligible. Support your answer with calculations and/or a proof.(3 marks)50 kg10 m100 kgT5m Consider f(x) Equals StartFraction 8 (x minus 1) Over x squared + 2 x minus 3 EndFraction.Which statements describe the existence of vertical asymptotes at x = 3 and x = 1?At x = negative 3, limit of f (x) as x approaches negative 3 minus = negative infinity and limit of f (x) as x approaches negative 3 plus = infinity, so there is a vertical asymptote. At x = 1, limit of f (x) as x approaches 1 minus = 2 and limit of f (x) as x approaches 1 plus = 2, so there is no vertical asymptote.At x = negative 3, limit of f (x) as x approaches negative 3 minus = infinity and limit of f (x) as x approaches negative 3 plus = negative infinity, so there is a vertical asymptote. At x = 1, limit of f (x) as x approaches 1 minus = 2 and limit of f (x) as x approaches 1 plus = 2, so there is no vertical asymptote.At x = negative 3, limit of f (x) as x approaches negative 3 minus = negative infinity and limit of f (x) as x approaches negative 3 plus = infinity, so there is a vertical asymptote. At x = 1, limit of f (x) as x approaches 1 minus = infinity and limit of f (x) as x approaches 1 plus = infinity, so there is no vertical asymptote.At x = negative 3, limit of f (x) as x approaches negative 3 minus = infinity and limit of f (x) as x approaches negative 3 plus = negative infinity, so there is a vertical asymptote. At x = 1, limit of f (x) as x approaches 1 minus = infinity and limit of f (x) as x approaches 1 plus = infinity, so there is no vertical asymptote. professor fogarty makes 30 photocopies of a magazine article and passes the article out to her students. the students are assigned to read the article and write an opinion paper about it. has professor fogarty violated copyright law? Which of the following statements about child development is true? can someone explain what algebra is please Which of the following are types of malicious software?Viruses , worms, adware, troans and spywareWord processing packagesAntivirus softwareOCR 5. A patient consumed the following fluids:1000 ml of IV, 4 oz of juice, 8 oz of milk, cup of chicken broth, 5 Tbsp of jello (counts as liquid). How many milliliters offluids did the patient intake total? In a recent study published in the journal Science, researchers found that a common pesticide causes honeybees to:A. resort to buzz pollination.B. assassinate their Queen.C. return to their hives less frequently.D. compete for resources with bumblebees.E. feed on their own larvae.