According to the ideal gas law, a 9.998 mol sample of argon gas in a 0.8311 L container at 502.7 K should exert a pressure of 496.2
atm. What is the percent difference between the pressure calculated using the van der Waals' equation and the ideal pressure? For Ar
gas, a = 1.345 L’atm/mol? and b = 3.219x10-2 L/mol.
Pideal – Puan der Waals |
Percent difference
x 100
Answer:
[tex]\%diff=24.0\%[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out firstly necessary for us to set up the van der Waals' equation as shown below:
[tex]p=\frac{RT}{v-b}-\frac{a}{v^2}[/tex]
Thus, we secondly calculate the molar volume as:
[tex]v=\frac{0.8311L}{9.998mol} =0.083L/mol[/tex]
Then, we plug in the entire variables in the vdW equation to get such pressure:
[tex]p=\frac{0.08206\frac{atm*L}{mol*K}*502.7K}{0.08313L/mol-0.03219L/mol}-\frac{1.345L*atm/mol}{(0.08313L/mol)^2}\\\\p=615.2atm[/tex]
And the ideal gas pressure:
[tex]p=\frac{0.08206\frac{atm*L}{mol*K}*502.7K}{0.08313L/mol}\\\\p=496.2atm[/tex]
Finally, the percent difference:
[tex]\%diff=\frac{|496.2atm-615.2atm|}{496.2atm} *100\%\\\\\%diff=24.0\%[/tex]
Regards!
For each reaction, write the chemical formulae of the oxidized reactants.
a. ZnCl2 (aq) + 2Na(s) → Zn(s) + 2NaCl(aq)
b. Al(s) + FeBrz (aq) → AlBrz (aq) + Fe(s)
c. FeSO4 (aq) + Zn (s) → Fe(s) + ZnSO4(aq)
Answer:
a. Na(s); b. Al(s); c. Zn(s)
Explanation:
Let's consider the following redox reactions.
a. ZnCl₂ (aq) + 2 Na(s) → Zn(s) + 2 NaCl(aq)
Na is oxidized because its oxidation number increases from 0 to +1 (in NaCl) whereas Zn is reduced because its oxidation number decreases from 2+ (in ZnCl₂) to 0.
b. Al(s) + FeBr₃ (aq) → AlBr₃ (aq) + Fe(s)
Al is oxidized because its oxidation number increases from 0 to +3 (in AlBr₃) whereas Fe is reduced because its oxidation number decreases from 3+ (in FeBr₃) to 0.
c. FeSO₄ (aq) + Zn(s) → Fe(s) + ZnSO₄(aq)
Zn is oxidized because its oxidation number increases from 0 to +2 (in ZnSO₄) whereas Fe is reduced because its oxidation number decreases from 2+ (in FeSO₄) to 0.
4. A sample of ammonia, NH3, contains 3.3 x 1021 hydrogen atoms. How many NH; molecules are in this sample?
Answer:
1.1 × 10²¹ NH₃ molecules
Explanation:
From the given information:
We were being told that the number of the hydrogen (H) atoms present in the sample of NH3 = 3.3 × 10²¹ hydrogen.
However, it signifies that each molecule of ammonia harbors 3hydrogen (H) atoms.
Hence, the number of molecules of NH₃ present;
[tex]\mathsf{=\dfrac{3.3\times 10^{21}}{3} \ molecules \ of \ {NH_3}}[/tex]
= 1.1 × 10²¹ NH₃ molecules
Which are the following exothermic or endothermic
Absorbs Energy
-Hrxn
+Hrxn
Feels Hot
Heat flows from surrounds to Reaction
Not Energetically Favorable
Energetically Favorable
Releases Energy
Feels Cold
Heat flows from the reaction to the surrounds
Answer:
Explanation:
Your mom
The shape of a molecule is determined by:
A. All of these
B. The number of electron clouds around the atom.
C. The number of bonds.
D. Mutual repulsion between electrons.
H2SO4 ????????????????
Explanation:
Sulfuric Acid (H2SO4) is a strong mineral acid that has is colorless when pure. This chemical is used as a chemical intermediate to manufacture other chemicals and cleaning metal surfaces. The formula for sulfuric acid is H2SO4. The molar mass of sulfuric acid is 98.07848 g mol.
HELP ASAS 15 POINTS
When using the process of evaporation to separate a mixture, what is left behind in the evaporating dish?
A. None of these.
B. The liquid evaporates and the solid is left in the dish.
C. The mixture does not separate, and the entire mixture evaporates.
D. The mixture does not separate, and the entire mixture remains in the dish.
Answer:
liquid will be evaporated while solid remains
What does quantization refer to?
Answer:
Quantization is the process of constraining an input from a continuous or otherwise large set of values (such as the real numbers) to a discrete set (such as the integers).
Explanation:
Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.
What is Quantatization in Chemistry ?In Chemistry , the concept that a system cannot have any possible energy value but instead is limited to certain specific energy values (states). This states depend on the specific system in question.
Under this system, Energy could be gained or lost only in integral multiples of some smallest unit of energy, a quantum (the smallest possible unit of energy).
Hence, Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.
Learn more about Quantum here ;
https://brainly.com/question/16746749
#SPJ2
What is the minimum pressure in kPa that must be applied at 25 °C to obtain pure water by reverse osmosis from water that is 0.690 M in sodium chloride and 0.08 M in zinc sulfate? Assume complete dissociation for electrolytes.
Answer:
1. Water purification method by reverse osmosis – membrane filtration
2. Method of purifying pure water by filter
3. Demineralization by ion exchange method
3. Demineralization by ion exchange method
Explanation:
HELP!!!!! Substance A and substance B are mixed together. To separate the mixture, water is added, and substance A is filtered out. Then, the remaining liquid is heated to remove the water, leaving a residue of substance B. Which statement about substance A and substance B could be correct?
A. Substance A is rice, and substance B is sugar.
B. Substance A is alcohol, and substance B is salt.
C. Substance A is sand, and substance B is alcohol.
D. Substance A is sugar, and substance B is instant coffee.
The statement that "substance A is rice, and substance B is sugar" is correct.
WHAT IS A MIXTURE?
A mixture in chemistry is a substance that contains two or more different substances. One notable characteristics of a mixture is that it can easily be separated using physical means.According to this question, a mixture contains two substances A and B. Water is added to this mixture for easy separation.
Substance A is filtered out. This means that substance A is a solid that is insoluble in water. This substance is RICE. The remaining liquid is heated to remove the water content leaving a residue of substance B. This shows that substance B is also a solid but soluble in water. SUGAR best fits this description.Therefore, in the mixture of two substances A and B, substance A is rice, and substance B is sugar.
Learn more at: https://brainly.com/question/6594631
PLEASE HELP! A machine uses filtration to separate a component from orange juice. Which component does the machine most likely separate from the mixture?
A - Pigment
B - Sugar
C - Pulp
D - Water
Answer: c
Explanation: Filtration is technically defined as the process of separating suspended solid matter from a liquid
Pulp is a lignocellulosic fibrous material prepared by chemically or mechanically separating cellulose fibers from wood, fiber crops .
Many commercial juices are filtered to remove fiber or pulp.
The correct answer is C, Pulp.
Orange is an example of a citrus fruit. Every citrus fruit has a pulp. The of pulp a citrus fruit is that stringy content in the endocarp of the fruit .
The pulp of a citrus fruit is where its juice is found.
When you want to prepare orange juice, you need to remove the pulp of the citrus fruit. This is done by filtering out the pulp from the juice.
Filtration is the process of removing larger particles. For a liquid juice, filtration is the process of removing solid particles from the orange juice.
https://brainly.com/question/11403039
Urea, CH4N2O (s), is manufactured from NH3 (g) and CO2 (g). H2O (l) is another product of this reaction. An experiment is started with 2.6 grams of NH3 (g) added into a reaction vessel with CO2 (g).
Write the balanced equation for this reaction, being sure to include physical states. Based on the balanced equation above, calculate the following:
a. the theoretical yield of urea in grams that can be made from the NH3
b. the actual amount of urea made if the percent yield for this reaction is 34%.
Answer:
a. 4.41 g of Urea
b. 1.5 g of Urea
Explanation:
To start the problem, we define the reaction:
2NH₃ (g) + CO₂ (g) → CH₄N₂O (s) + H₂O(l)
We only have mass of ammonia, so we assume the carbon dioxide is in excess and ammonia is the limiting reactant:
2.6 g . 1mol / 17g = 0.153 moles of ammonia
Ratio is 2:1. 2 moles of ammonia can produce 1 mol of urea
0.153 moles ammonia may produce, the half of moles
0153 /2 = 0.076 moles of urea
To state the theoretical yield we convert moles to mass:
0.076 mol . 58 g/mol = 4.41 g
That's the 100 % yield reaction
If the percent yield, was 34%:
4.41 g . 0.34 = 1.50 g of urea were produced.
Formula is (Yield produced / Theoretical yield) . 100 → Percent yield
What is Bose Einstein state of matter and their examples
Answer:
A BEC ( Bose - Einstein condensate ) is a state of matter of a dilute gas of bosons cooled to temperatures very close to absolute zero is called BEC.
Examples - Superconductors and superfluids are the two examples of BEC.
Explanation:
calculate the total consumer surplus in the amusement park market if they a 12
Answer:
The total consumer surplus is 240.
Explanation:
If p=12 then q=20
0.5×(36−12)×20=240
here's the graph to help you see the change.
A(n) _____, used as part of the stationary phase, has an affinity for the solvent and the chemical components of the mixture. adsorbent eluent Rf factor chromatogram
The Adsorbent is used as part of the stationary phase and has an affinity for the solvent and the chemical components of the mixture.
The adsorbent has a high affinity for solvent and the chemical components of the mixture.
Chromatography is a method of separation in which the mixture of substances is introduced into a mobile phase (solvent). The separation occurs as the solvent interacts with an adsorbent(stationary phase).
The extent of separation of the components of the mixture depends on the extent of interaction between the mobile and the stationary phase . This interaction also determines the retention factor (Rf) of the separation.
For a definition of chromatography, see
https://brainly.com/question/19334271
Which option is a physical property of matter?
A. acidity
B. reactivity
C. boiling point
D. flammability
Answer:
boiling point is the physial property of matter
The option that is showing the physical property of the matter is boiling point, the correct option is C.
What is physical property?A physical property is any measurable property whose value describes the state of a physical system.
Changes in a system's physical properties can be used to describe its transitions between momentary states. Physical properties are also known as observables. They do not have modal properties.
Physical properties include color, phase, odor, and boiling point. Since reactivity with oxygen is dependent on the chemical nature of the object, it is not a physical property.
A compound's physical property is one that can be observed and measured. The chemical composition of a compound is unaffected by a physical property.
Thus, the correct option is C.
For more details regarding physical property, visit:
https://brainly.com/question/18327661
#SPJ6
Which of the following are examples of single replacement reactions? Select all that apply.
Answer:
Na2S(aq)+Cd(No3)2(aq)=CdS(s)+2NaNo3(aq)
Answer: it’s checkbox 2&3
Isotopes are: A. are only theoretical. B. only formed in laboratories. C. found in nature. D. found in the nuclear reactions in stars but not on Earth.
Answer:
B. only formed in laboratories
Explanation:
i know
Isotopes are only formed in Laboratories. hence, Option (B) is correct.
What are Isotopes ?
Each of two or more forms of the same element that contain equal numbers of protons but different numbers of neutrons in their nuclei, and hence differ in relative atomic mass but not in chemical properties; in particular, a radioactive form of an element is known as Isotope.
Isotopes are two or more types of atoms that have the same atomic number and position in the periodic table, and that differ in nucleon numbers due to different numbers of neutrons in their nuclei.
Therefore, Isotopes are only formed in Laboratories. hence, Option (B) is correct.
Learn more about Isotopes here ;
https://brainly.com/question/12955625
#SPJ2
Sodium acetate is produced by the reaction of baking soda and vinegar. The resultant solution is then heated until it becomes saturated and allowed to cool. As a result, the solution has become supercooled. Upon addition of a small seed crystal, the solution temperature increases as sodium acetate trihydrate crystallizes. Its molar enthalpy of fusion is 35.9 kJ/mol. How much thermal energy would be released by 276.0 g of sodium acetate trihydrate (molar mass
Answer: The thermal energy that would be released by 276.0g of sodium acetate trihydrate is 71.8kJ.
Explanation:
Supercooling is the process of lowering the temperature a liquid below its freezing point, without it becoming solid. A liquid below its freezing point will crystallize in the presence of a seed crystal because it serves as a structure for formation of crystals. From the question,
The given mass of sodium acetate trihydrate
(CH3COONa.3H2O)= 276.0g
Molar mass of sodium acetate
trihydrate= 136.08g/mol
Thermal heat of fusion of sodium acetate
trihydrate = 35.9 kJ/mol
From the given mass the number of moles present= 276.0/ 136.08
= 2.0moles
Therefore the heat (thermal) energy of the given mass of sodium acetate
trihydrate = 2.0 × 35.9
= 71.8kJ
Therefore, upon addition of a small seed crystal, the solution temperature increases as sodium acetate trihydrate crystallizes.
What can be found on the periodic table?
A. the name of molecules formed by the element
B. the number of isotopes an element has
C. the date an element was discovered
D. the number of protons an element has
Answer:
I think the answer is..
The name of molecules formed by the element.
I hope it will help you !
The specific heat capacity of lead is 0.13 J/g-K. How much heat (in J) is required to raise the temperature of 15 g of lead from 22 °C to 37 °C? a. 5.8 × 10-4 J b. 0.13 J c. 29 J d. 2.0 J e. -0.13 J
Answer:
c. 29 J
Explanation:
Step 1: Given data
Specific heat capacity of Pb (c): 0.13 J/g.K (= 0.13 J/g.°C)Mass of Pb (m): 15 gInitial temperature: 22 °CFinal temperature: 37 °CStep 2: Calculate the temperature change
ΔT = 37 °C - 22 °C = 15 °C
Step 3: Calculate the heat (Q) required to raise the temperature of the lead piece
We will use the following expression.
Q = c × m × ΔT
Q = 0.13 J/g.°C × 15 g × 15 °C = 29 J
Nucleophilic aromatic substitution involves the formation of a resonance-stabilized carbanion intermediate called a Meisenheimer complex as the nucleophile attacks the ring carbon carrying the eventual leaving group.
a. True
b. False
Answer:
True
Explanation:
Aromatic rings undergo nucleophillic substitution reactions in the presence of a electron withdrawing group which stabilizes the Meisenheimer complex.
When the nucleophile attacks the ring carbon atom carrying the eventual leaving group. A resonance-stabilized carbanion intermediate called a Meisenheimer complex is formed.
Subsequent loss of the leaving group from the intermediate complex yields the product of the reaction.
A sample of gas is held at constant volume. If the number of moles of this sample of gas is doubled and the pressure of this sample of gas is halved, what happens to the absolute temperature of the gas?
Select one
a. The absolute temperature is doubled.
b. The absolute temperature is halved.
c. The absolute temperature is quadrupled.
d. The absolute temperature is quartered.
e. The absolute temperature stays the same.
Answer:
number of moles of gas increases the volume also increases.
Consider the reaction between CaCO3 and HCl. Which of the following could speed up the reaction?
I. Increasing concentration of the HCl
II. Increasing size of the CaCO3 pieces
III. Increasing temperature
a) I and III only
b) I, II, and III
c) I only
d) II and III only
Hãy cho biết giá trị và ý nghĩa của số lượng tử n, l, m, ms khi mô tả trạng thái của electron trong nguyên tử?
Based on periodic properties, choose the more metallic element from each of the following pairs.
Match the words in the left column to the appropriate blanks in the sentences on the right.
Between Sr and Sb, the more metallic element is ______
Between \rm Sr and \rm Sb, the more metallic element is _______
Between As and Bi, the more metallic element is ______
Between \rm As and \rm Bi, the more metallic element is _______
Between Cl and O, the more metallic element is ______
Between \rm Cl and \rm O, the more metallic element is ______
Between S and As, the more metallic element is ______
Between \rm S and \rm As, the more metallic element is _______
Answer:
Sr is the more metallic element
Bi is the more metallic element
O is the more metallic element
As is the more metallic element
Explanation:
One thing should be clear; metallic character increases down the group but decreases across the period.
Hence, as we move across the period, elements become less metallic. As we move down the group elements become more metallic.
This is the basis upon which decisions were made about the metallic character of each of the elements listed above.
1. Explain the test for unsaturation.
2. Write down the balanced chemical equations for the complete and incomplete
combustion of octene
3. Explain how propanol, an alcohol, is formed from propene..
4. How is margarine formed?
Answer:
1)In organic chemistry, the bromine test is a qualitative test for the presence of unsaturation (carbon-to-carbon double or triple bonds), phenols and anilines. ... The more unsaturated an unknown is, the more bromine it reacts with, and the less coloured the solution will appear.
2)The equation for incomplete combustion of propane is: 2 C3H8 + 9 O2 → 4 CO2 + 2 CO + 8 H2O + Heat. If not enough oxygen is present for complete combustion, incomplete combustion occurs. The result of incomplete combustion is, once again, water vapour, carbon dioxide and heat. But it also produces carbon monoxide.
Explanation:
3)Propene, also known as propylene, is an unsaturated organic compound with the chemical formula {\displaystyle {\ce {CH3CH=CH2}}}. It has one double bond, and is the second simplest member of the alkene class of hydrocarbons. It is a colorless gas with a faint petroleum-like odor.
Formula: C3H6
IUPAC ID: Propene
4)Margarines are chemically created during hydrogenation which, until January 1, 2006, relied upon trans fats to solidify their vegetable oils. Food companies have been exploring options for replacing trans fat in partially hydrogenated margarine.
what characterizes a homogeneous mixture?
Answer:
a mixture that doesn't really show the ingredients or things put into the material or food.
Tapeworm is grouped in the phylum Platyhelminthes
Answer:
Tapeworm, also called cestode, any member of the invertebrate class Cestoda (phylum Platyhelminthes), a group of parasitic flatworms containing about 5,000 species. ... Tapeworms also lack a circulatory system and an organ specialized for gas exchange.
At 445oC, Kc for the following reaction is 0.020. 2 HI(g) <--> H2 (g) + I2 (g) A mixture of H2, I2, and HI in a vessel at 445oC has the following concentrations: [HI] = 1.5 M, [H2] = 2.50 M and [I2] = 0.05 M. Which one of the following statements concerning the reaction quotient, Qc, is TRUE for the above system?
a. Qc = Kc; the system is at equilibrium.
b. Qc is less than Kc; more H2 and I2 will be produced.
c. Qc is less than Kc; more HI will be produced.
d. Qc is greater than Kc; more HI will be produced.
Explanation:
The given balanced chemical equation is:
[tex]2 HI(g) <--> H_2 (g) + I_2 (g)[/tex]
The value of Kc at 445oC is 0.020.
[HI]=1.5M
[H2]=2.50M
[I2]=0.05M
The value of Qc(reaction quotient ) is calculated as shown below:
Qc has the same expression as the equilibrium constant.
[tex]Qc=\frac{[H_2][I_2]}{[HI]^2} \\Qc=(2.50Mx0.05M)/(1.5M)^2\\Qc=0.055[/tex]
Qc>Kc,
Hence, the backward reaction is favored and the formation of Hi is favored.
Among the given options, the correct answer is option d. Qc is greater than Kc; more HI will be produced.
