Three people are trying to move a box. Which set of forces will result in a net
force on the box of 20 N to the left?

Answer:

144 meters

Explanation:

it takes 6 seconds to hit the ground right and the ball lays off 24 m per second .

so by the time the ball hits the ground 6 seconds passed. so that means the cliff is 6.0×24=144

Answer:

The speed of the swimmer in stil water is 0.5 m/s

Explanation:

Given;

total time taken to swim across = 6 mins 40 s = (6 x 60s) + 40 s = 400 s

width of the river, = 200 m

Please find the image attached for explanation.

Answer:

[tex]V=8.08m/s[/tex]

Explanation:

From the question we are told that:

Height[tex]h=5.00m[/tex]

Mass [tex]m=0.750kg[/tex]

Radius [tex]r=4.00cm=>0.04m[/tex]

Generally the equation for Total energy is mathematically given by

  [tex]mgh=\frac{1}{2}mv^2+\frac{1}{2}Iw^2[/tex]

Therefore

 [tex]V=\sqrt{\frac{4gh}{3}}[/tex]

 [tex]V=\sqrt{\frac{4*9.8*5}{3}}[/tex]

 [tex]V=8.08m/s[/tex]

Answer:

0.1 s

Explanation:

The net force on the log is F - f = ma where F = force due to winch = 2850 N, f = kinetic frictional force = μmg where μ = coefficient of kinetic friction between log and ground = 0.45, m = mass of log = 300 kg and g = acceleration due to gravity = 9.8 m/s² and a = acceleration of log

So F - f = ma

F - μmg = ma

F/m - μg = a

So, substituting the values of the variables into the equation, we have

a = F/m - μg

a = 2850 N/300 kg - 0.45 × 9.8 m/s²

a = 9.5 m/s² - 4.41 m/s²

a = 5.09 m/s²

Since acceleration, a = (v - u)/t where u = initial velocity of log = 0 m/s (since it was a rest before being pulled out of the ditch), v = final velocity of log = 0.5 m/s and t = time taken for the log to reach a speed of 0.5 m/s.

So, making t subject of the formula, we have

t = (v - u)/a

substituting the values of the variables into the equation, we have

t = (v - u)/a

t = (0.5 m/s - 0 m/s)/5.09 m/s²

t = 0.5 m/s ÷ 5.09 m/s²

t = 0.098 s

t ≅ 0.1 s

Compute the work done on the table:

W = Fd = (320 N) (32 m) = 10,240 J

Divide this by the given time duration to get the power output:

P = W/∆t = (10,240 J) / (150 s) ≈ 63.3 W

Answer:

THIS is very important.

Explanation:

If the word "this" was never invented, people wouldn't have a way to tell another person what is directly in front of them.

BTW this is a joke.

Answer:

Frequency is the number of complete oscillations or cycles or revolutions made in one second.

Answer:

exactly 1273 N whether or not the box moves.

Explanation:

In the case when the bat is swing and it is hitted to a heavy box having a force of 1273 N so here the force of the box that exert on the box should be accurately 1273 N even if the box is moved or not. As the third law of the newton should be equivalent & the opposite reaction

Therefore as per the given situation, the above represent the answer

Answer:

The main difference between the step-up and step-down transformer is that the step-up transformer increases the output voltage, while the step-down transformer reduces the output voltage.

Answer:

[tex]p\times q=-23i+7j+6k[/tex]

Explanation:

We are given that

p=2i+4j+3k

q=i+5j-2k

We have to find pxq

We know that

[tex]p\times q=\begin{vmatrix}  i&j  &k\\  2&4  & 3\\  1& 5 & -2\end{vmatrix}[/tex]

[tex]p\times q=i(-8-15)-j(-4-3)+k(10-4)[/tex]

[tex]p\times q=-23i+7j+6k[/tex]

Hence,[tex]p\times q=-23i+7j+6k[/tex]

Answer:

b = 0.89

Explanation:

The given vector is, [tex]A=0.2i+bj+0.4k[/tex]

A is a unit vector

We need to find the value of b.

For a unit vector, |A| = 1

So,

[tex]0.2^2+b^2+0.4^2=1\\\\0.04+b^2+0.16=1\\\\0.2+b^2=1\\\\b^2=1-0.2\\\\b=0.89[/tex]

So, th value of b is 0.89.

Complete Question

An electric field is given by E= (5x, 0, 0) in units of N/C when x is in meters. What is the potential difference VA - VB from point B at (0,7) m to point A at (7,0) m? V

Answer:

[tex]V_A-V_B=-122.5V[/tex]

Explanation:

From the question we are told that:

Position of point [tex]B=(0,7) m[/tex]

Position of point [tex]A=(7,0) m[/tex]

Generally the equation for pd across the points is mathematically given by

 [tex]V_A-V_B=-\int_0^7(5x)d[/tex]

 [tex]V_A-V_B=-[\frac{5x^2}{2}]_0^7[/tex]

 [tex]V_A-V_B=-[\frac{5(7)^2}{2}][/tex]

 [tex]V_A-V_B=-122.5V[/tex]

Answer:

450792 kgm/s

Explanation:

by conservation of momentum,

total momentum AFTER collision = total momentum BEFORE collision

                                                       =mv+m'v'

                                                       =12954×28+17616×5

                                                       =450792 kgm/s

Answer:

Points away from the disk along the z-axis.

Explanation:

Along the axis of the disk, which is the z - axis, the total vertical electric field components of the charged disk sum up while the horizontal components cancel out. Thus, leaving only vertical components of electric field along the axis of the disk.

Since the disk is positively charged and electric field lines point away from a positive charge, the electric field along the axis of a positive disk of charge points away from the disk along the z-axis.

Answer:

the impulse experienced by the passenger is 630.47 kg

Explanation:

Given;

initial velocity of the car, u = 0

final velocity of the car, v = 9.41 m/s

time of motion of the car, t = 4.24 s

mass of the passenger in the car, m = 67 kg

The impulse experienced by the passenger is calculated as;

J = ΔP = mv - mu = m(v - u)

           = 67(9.41 - 0)

           = 67 x 9.41

           = 630.47 kg

Therefore, the impulse experienced by the passenger is 630.47 kg

Answer:

The force between the 10 th car and the 11 th car is 13636.4 N.

Explanation:

Force, F = 150 kN

acceleration, a = 2 m/s^2

Let the mass of each car is m. \Total numbers of cars = 11

F = n m a

150000 = 11 x m x 2

m = 6818.18 kg

The force between the 10 th and 11 th car is

T = ma = 6818.18 x 2 = 13636.4 N

Answer:

concave curves inward like an hourglass and convex is an outward curve like a football

Explanation:

hope this helps

Answer:

francium

Atomic radii vary in a predictable way across the periodic table. As can be seen in the figures below, the atomic radius increases from top to bottom in a group, and decreases from left to right across a period. Thus, helium is the smallest element, and francium is the largest.

Answer:

The ratio of diameter of copper wire to the iron wire is 0.42.

Explanation:

length of both the wires is same as L and resistance is R.

resistivity of copper = 1.7 x 10^-8 ohm m

resistivity of iron = 9.7 x 10^-8 ohm m

Let the diameter of copper is d and for iron is d'.

The formula of the resistance is

[tex]R = \rho\times\frac{L}{A}\\\\R = \rho\times\frac{4L}{\pi d^2}.... (1)\\And\\ R = \rho'\times\frac{4L}{\pi d'^2}.... (2)\\\\comparing (1) by (2)\\\\1.7\times10^{-8}\times\frac{4L}{\pi d^2}=9.7\times10^{-8}\times\frac{4L}{\pi d'^2}\\\\d : d' = 0.42[/tex]

Answer:

36.75 N

Explanation:

Applying

F = mgμ................. Equation 1

Where F = Friction force on the box, m = mass of the box, g = acceleration due to gravity of the box, μ = coefficient of static friction

From the question,

Given: m = 15 kg, μ = 0.25

Constant: g = 9.8 m/s²

Substitute these values into equation 1

F = 15(9.8)(0.25)

F = 36.75 N

Hence the friction force on the box is 36.75 N

Answer:

72  is the premimum of the insurance.

Explanation:

Below is the given values:

The loading = 0.4

Coinsurance rate = 0.2

Number of units = 100

Total number of units = 100 * 0.4 = 40

Remaining units = 60 * 0.2 = 12

Add the 60 and 12 values = 60 + 12 = 72

Thus, 72  is the premimum of the insurance.

Answer:

The number of crates is 84580.

Explanation:

mass, m = 30 kg

height, h = 0.9 mm  

Power, P = 0.5 hp = 0.5 x 746 W = 373 W

time, t = 1 minute = 60 s

Let the number of crates is n.

Power is given by the rate of doing work.

[tex]P = \frac{n m gh}{t}\\\373 =\frac{n\times 30\times9.8\times 0.9\times 10^{-3}}{60}\\\\n =84580[/tex]

Answer:

44.6 m

Explanation:

From the law of conservation of energy, the total energy at the top of the ramp, E equals the total energy at the bottom of the ramp.

E = E'

U₁ + K₁ + W₁ = U₂ + K₂ + W₂ where U₁ = potential energy at top of ramp = mgh where = height of ramp, K₁ = kinetic energy at top of ramp = 1/2mv₁² where v₁ = speed at top of ramp = 1.8 m/s, W₁ = work done by friction and air resistance at top of ramp = 0 J, U₂ = potential energy at bottom of ramp = 0 J(since the skier is at ground level h = 0), K₂ = kinetic energy at bottom of ramp = 1/2mv₂² where v₂ = speed at bottom of ramp = 28.0 m/s, W₁ = work done by friction and air resistance at bottom of ramp = 3500 J

Substituting the values of the variables into the equation, we have

U₁ + K₁ + W₁ = U₂ + K₂ + W₂

mgh + 1/2mv₁² + W₁ = U₂ + 1/2mv₂² + W₂

mgh + 1/2m(1.8 m/s)² + 0 J = 0 J + 1/2m(28 m/s)² + 3500 J

9.8 m/s² × 75 kg h + 1/2 × 75 kg (3.24 m²/s²) + 0 J = 0 J + 1/2 × 75 kg (784 m²/s²) + 3500 J

(735 kgm/s²)h + 75  kg(1.62 m²/s²) = 75 kg(392m²/s²) + 3500 J

(735 kgm/s²)h + 121.5  kgm²/s² = 29400 kgm²/s² + 3500 J

(735 kgm/s²)h + 121.5 J = 29400 J + 3500 J

(735 kgm/s²)h + 121.5 J = 32900 J

(735 kgm/s²)h = 32900 J - 121.5 J

(735 kgm/s²)h = 32778.5 J

h = 32778.5 J/735 kgm/s²

h = 44.6 m

So, the maximum height of the ramp for which the maximum safe speed will not be exceeded is 44.6 m.

Answer:

T = 2398 K

Explanation:

To calculate the emission of the light bulb we use the law is Stefan

           P = σ A e T⁴

as they indicate that the filament is a black body, the emissivity is equal to 1 (e = 1)

           T = [tex]\sqrt[4]{\frac{P}{ \sigma A} }[/tex]

    let's calculate

           T =[tex]\sqrt[4]{\frac{120}{5.67 \ 10^{-8} \ 6.4 \ 10^{-5}} }[/tex]

           T = [tex]\sqrt[4]{33.06878 \ 10^{12} }[/tex]

           T = 2,398 10³ K

           T = 2398 K

Answer:

Answer is a I checked the work

Answer:

0.0953125 N

Explanation:

Applying,

F = kq'q/r²................. Equation 1

Where F = electrostatic force, k = coulomb's constant, q' and q = first and second charge respectively, r = distance between the charge.

From the equation,

If both charges remain constant,

Therefore,

F = C/r²

C = Constant =  product of the two charge(q' and q) and k

Fr² = F'r'²................ Equation 2

From the question,

Given: F = 6.10 N

Assume: r = x m, r' = 8x

Substitute these value into equation 2

6.1(x²) = F'(8x)²

F' = 6.1/64

F' = 0.0953125 N

Hence the new force will become 0.0953125 N

This question is incomplete, the complete question is;

Flag

A constant force F = 6i+8j-6k moves an object along a straight line from point (6, 0, -10) to point (-6, 7, 2).

Find the work done if the distance is measured in meters and the magnitude of the force is measured in newtons.

Answer:

the work done is -88 J

Explanation:

Given the data in the question;

we know that;

Work done = F × S

where constant force F = ( 6i + 8j - 6k )

S = ( -6i + 7j + 2k ) - ( 6i + 0j - 10k )

S = ( (-6i - 6i) + (7j - 0j) + ( 2k - ( -10k) ) )

S = ( -12I + 7j + 12k )

so

Work force = ( 6i + 8j - 6k ) × ( -12I + 7j + 12k )

Work force = ( 6 × -12 ) + ( 8 × 7 ) + ( -6 × 12 )

Work force = -72 + 56 - 72

Work force = -88 J

Therefore, the work done is -88 J

Answer:

Where is the R statement?