This diagram shows the magnetic field lines near the ends of two magnets. There is an error in the diagram.

Two bar magnet with the north pole of one near the south pole of the second. field lines are leaving the north pole and bent away from the south pole of the other. Field lines are leaving the south pole of one and bending away from the north pole of the other.
Which change will correct the error in the diagram?

a)changing the N to S
b)reversing the arrows on the left to point toward the N
c)changing the S to N
d)reversing the arrows on the right to point toward the S

I see six (6) loops.

I attached a drawing to show where I get six loops from.

Answer:

They can be mixed together to make almost any other color.

Explanation:

All the three primary colors can mix to form white color.

Blue and red mix to form a black color.

The question is incomplete. The complete question is :

High-speed stroboscopic photographs show that the head of a 200 g golf club is traveling at 60 m/s just before it strikes a  50 g golf ball at rest on a tee. After the collision, the club head travels (in the same direction) at 40 m/s. Find the speed of the golf ball just after impact.

Solution :

We know that momentum = mass x velocity

The momentum of the golf club before impact = 0.200 x 60

                                                                             = 12 kg m/s

The momentum of the ball before impact is zero. So the total momentum before he impact is 12 kg m/s. Therefore, due to the conservation of momentum of the two bodies after the impact is 12 kg m/s.

Now the momentum of the club after the impact is = 0.2 x 40

                                                                                    = 8 kg m/s

Therefore the momentum of the ball is = 12 - 8

                                                                = 4 kg m/s

We know momentum of the ball, p = mass x velocity

                                                     4 = 0.050 x velocity

∴ Velocity =  [tex]$\frac{4}{0.050}$[/tex]

                 = 80 m/s

Hence the speed of the golf ball after the impact is 80 m/s.

Answer:

B. Smaller than

Explanation:

This question is from the Doppler effect. As the object which is in motion goes off from the other, there's a reduction in the frequency. This is due to the fact that successive soundwave get to be longer. So that the pitch will then be lowered. When the person observing moves towards what is making the sound, each soundwave that follows gets faster than the previous.

Answer:

Option B.

Explanation:

Remember that we can think on any movement as a sum of a movement in the y-axis, the movement in the x-axis, and the movement in the z-axis. And these are not related, this means that, for example, the movement in x does not affect the movement in y.

So, when we analyze the problem of "how long takes an object to hit the ground"

We do not care for the horizontal motion of the object, we only care for the vertical motion of the object.

So, if an object is dropped, and another has a given initial velocity in the x-axis, in both cases the initial velocity in the y-axis will zero.

And in both cases, the only vertical force acting on the balls will be the gravitational force (so both objects will have the same vertical acceleration and the same vertical initial velocity) with this, we already know that the vertical motion of both objects will be exactly the same.

So, both objects will hit the ground at the same time.

(notice that here we are ignoring things like air resistance and other complex forces)

So here the correct option is b:  Neither. Their vertical motion is the same, so they will reach the ground at the same time.

Answer:

Physical properties are properties that can be measured or observed without changing the chemical nature of the substance. Some examples of physical properties are:

color (intensive)

density (intensive)

volume (extensive)

mass (extensive)

boiling point (intensive): the temperature at which a substance boils

melting point (intensive): the temperature at which a substance melts

Explanation:

Answer:

A gold medal has the (minimum) dimensions of:

diameter = 60mm

thickness = 3mm

So we will work with those dimensions.

The medal is then a cyinder of diameter

D = 60mm = 6cm

and height:

H = 3mm = 0.3cm

Remember that the volume of a cylinder is:

V = pi*(D/2)^2*H

where pi = 3.14

Then the volume of a medal is:

V = 3.14*(6cm/3)^2*0.3cm = 3.768 cm^3

The density of the gold in g/cm^3 is:

d = 19.3 g/cm^3

And remember that:

density = mass/volume

So, if the volume is 3.768 cm^3

Then the mass will be:

mass = density*volume =  19.3 g/cm^3*3.768 cm^3 = 72.7 g

So, a single gold medal would weight 72.7 grams

And each gram of gold costs $40

Then the total cost of the gold medal would be:

value = $40*72.7 = $2,908

Now, if yo think that in the Olympics there are 35 sports (a lot with a large number of players) and near 50 disciplines, they need a lot of gold medals.

And each gold medal costs $2,908

So the total cost (only for the gold medals, ignoring the others) would be to high.

This is why the gold medals are made mostly of silver.

The aircraft is 12 meters higher than the building so it is at 45 + 12 = 57 meters high.

For every 12 meters it travels it drops 1 m.

Divide the height by 12 to find the distance it travels:

57 / 12 = 4.75

It touches down 4.75 meters from the building.

The building is 684 meters away from the aircraft touching down on the runway.

A right-angled triangle's side ratios are the easiest way to express a function of an arc or angle, such as the sine, cosine, tangent, cotangent, secant, or cosecant. These functions are known as trigonometric functions.

As given in the problem an aircraft has a glide ratio of 12 to 1. (Glide ratio means that the plane drops 1 m in each 12 m it travels horizontally.) A building 45 m high lies directly in the glide path to the runway. If the aircraft clears the building by 12 m,

the total height of the aircraft when it clears the building = 45 +12

the total height of the aircraft when it clears the building is 57 meters

It is given that the Glide ratio is 12:1,

The distance of the building from touch down on the runway = 12 ×57

The distance of the building from the touch-down on the runway is 684 meters.

Thus, the building is 684 meters away from the aircraft touching down on the runway.

Learn more about the trigonometric functions here,

brainly.com/question/14746686

#SPJ2

Answer:

a.v=u+v/2

a.v=s/t

combining two equation we get,

u+v/2=s/t

(u+v)t/2=s

(u+v)t/2=s

{u+(u+at)}t/2=s

(u+u+at)t/2=s

(2u+at)t/2=s

2ut+at^2/2=s

2ut/2+at^2/2=s

UT +1/2at^2=s

proved

a=v-u/t

at=v-u

u+at=v

Answer:

461.73 K

Explanation:

Given that,

The mass of a bullet, m = 5.7 g

Speed of the bullet, v = 490 m/s

Half the kinetic energy of the bullet is transformed into internal energy and remains with the bullet while the other half is transmitted to the tree.

Using the conservation of energy,

[tex]\dfrac{1}{2}(\dfrac{1}{2}mv^2)=mc\Delta T\\\\\Delta T=\dfrac{v^2}{4c}[/tex]

Where

x is the specific heat of lead, c = 130 J/kg K

So,

[tex]\Delta T=\dfrac{(490)^2}{4\times 130}\\\\=461.73\ K[/tex]

So, the increase in temperature of the bullet is 461.73 K.

Answer:

The gravitational force Asteroid A experiences is greater than the gravitational force Asteroid C experiences

Answer:b

Explanation:

Answer:

[tex]B=2.91\ \mu T[/tex]

Explanation:

Given that,

The current in the loop, I = 2 A

The radius of the loop, r = 0.4 m

We need to find the magnetic field at a distance 0.09 m along the axis and above the center of the loop. The formula for the magnetic field at some distance is given as follows :

[tex]B=\dfrac{\mu_o}{4\pi }\dfrac{2\pi r^2 I}{(r^2+d^2)^{3/2}}[/tex]

Put all the values,

[tex]B=10^{-7}\times \dfrac{2\pi \times 0.4^2 \times 2}{(0.4^2+0.09^2)^{3/2}}\\\\=2.91\times 10^{-6}\ T\\\\or\\\\B=2.91\ \mu T[/tex]

So, the required magnetic field is equal to [tex]2.91\ \mu T[/tex].

Answer:

Explanation:

Kinematic equation

v = u + at

If UP is assumed to be the positive direction and we let gravity be 10 m/s² which will be in the downward direction so will be negative.

a) v = 6  + (-10)(0.5) = 1 m/s    the result is positive, so upward

b) v = 6  + (-10)(2) = -14 m/s    the result is negative, so downward

Answer:

Yes

Explanation:

speed of truck = 20 km/h

Initially the car at rest.

maximum velocity of car = 40 km/h

When the truck and the car collide, the momentum of the truck transferred to car.

So, the car can attain the speed of 40 km/h.

Answer:

Action and reaction are equal in magnitude and opposite in direction but they do not balance each other because they act on different objects so they don't cancel each other out.

hope this will help you more

Question: A commuter backs her car out of her garage with an acceleration of 1.4 m/s² (a) How long does it take her to reach a speed of 2.00 m/s

Answer:

1.43 s

Explanation:

Applying,

a = (v-u)/t........... Equation 1

Where a = acceleration, v = final velocity, u = initial velocity, t = time

make t the subject of the equation

t = (v-u)/a........... Equation 2

From the question,

Given: v = 2 m/s, u = 0m/s (from rest), a = 1.4 m/s²

Substitute into equation 2

t = (2-0)/1.4

t = 1.43 s

Answer:

Force acting on a body of mass 7 kg which produces an accceleration of 10 m/s2 is 70 N

Answer:

10 m/s2 or 70 newtons.

Explanation:

............................

............

Answer:

1.67 N

Explanation:

Applying,

F = u(dm/dt)+m(du/dt)................ Equation 1

Where F = force, m = mass of the vehicle, u = speed.

Since u is constant,

Therefore, du/dt = 0

F = u(dm/dt)............... Equation 2

From the question,

Given: u = 10 m/s, dm/dt = 10 kg/min = (10/60) kg/s

Substitute these values into equation 2

F = 10(10/60)

F = 100/60

F = 1.67 N

Answer:

Look at work

Explanation:

Series:

I is the same for all resistors so just find the value of Req. In series Req= R1+R2+...+Rn. So here it will be 4.5+2.3=6.8ohms. Ieq=Veq/Req=4.41A. And since current is the same across all resistors the current to the lightbulb is 4.41A.

Parallel:

V is the same for all resistors so start of by finding Req. In parallel, Ieq=I1+I2+...+In. So I1= 30/4.5= 6.67A and I2= 13.04A. Ieq= 6.67+13.04= 19.71A.

Answer:

Reaction force

Explanation:

Newton´s 3rd law says that every force exerted in nature has an equal and opposite force.

For example here, when Al exerts force on Ben, Ben exerts the same amount of force (30N) on Al.

Al exerts the action force and Ben exerts the reaction force.

Answer:

Your fart only has so much force, not nearly enough to launch you into oblivion. Your fart and you still exert a force onto each other, so I guess, hypothetically, you could fly if you really, really try hard enough. Just make sure you don't try too hard and prolapse as a result :)

Answer:

Both stones will land at the same time because both stones will fall with the same acceleration through the same height.

Explanation:

We are given that

Mass of stone ,m1=5 Kg

Mass of stone, m2=1 kg

We have to find which stone more faster will land and why.

[tex]h=u+\frac{1}{2}gt^2[/tex]

Initial velocity of both stones=0

[tex]h=\frac{1}{2}gt^2[/tex]

[tex]t^2=\frac{h}{g}[/tex]

[tex]t=\sqrt{\frac{h}{g}}[/tex]

[tex]t_1=t_2=\sqrt{\frac{h}{g}}[/tex]

Because both stones are thrown from the same height.

Both stones will land at the same time because both stones will fall with the same acceleration through the same height  and the acceleration  does not depend of its mass.

Answer:

Its the Federal government

Answer:

665.25 Pa

Explanation:

Given data :

Weight of the disk, w = 45 N

Diameter, d = 30 cm

                    = 0.30 m

Therefore, radius of the disk,

[tex]$r=\frac{d}{2}$[/tex]

[tex]$r=\frac{0.30}{2}$[/tex]

   = 0.15 m

Now, area of the cylindrical disk,

[tex]$A=\pi r^2$[/tex]

[tex]$A=3.14 \times (0.15)^2$[/tex]

   [tex]$=0.07065 \ m^2$[/tex]

∴ The gauge pressure at the top of the oil column is :

   [tex]$p=\frac{w}{A}$[/tex]

   [tex]$p=\frac{47}{0.07065}$[/tex]

      = 665.25 Pa

Therefore, the gauge pressure is 665.25 Pa.

The definition of pressure allows to find the result for the pressure at the top of the oil cylinder is:

The pressure is defined by the relationship between perpendicular force and area.

          [tex]P = \frac{F}{A}[/tex]

where P is pressure, F is force, and A is area.

They indicate that the wooden cylinder weighs W = 45.0 N and has a diameter of d = 30 cm = 0.30 m.

The area is:

        A = π r² = [tex]\pi \frac{d^2}{4}[/tex]  

In the attachment we see a diagram of the forces, where the weight of the cylinder and the thrust are equal.

         B-W = 0

          B = W

The force applied to the liquid is the weights of the cylinder. Let's replace.

          [tex]P= \frac{W}{A} \\P = W \frac{4}{\pi d^2 }[/tex]  

Let's calculate.

          [tex]P = \frac{45 \ 4 }{\pi \ 0.30^2 }[/tex] P = 45 4 / pi 0.30²

          P = 636.6 Pa

In conclusion using the definition of pressure we can find the result for the pressure at the top of the oil cylinder is:

Learn more about pressure here: brainly.com/question/17467912

[tex]E_0=1.5033×10^{-10}\:\text{J}[/tex]

Explanation:

The rest energy [tex]E_0[/tex] of a proton of mass [tex]m_p[/tex] is given by

[tex]E_0 = m_pc^2[/tex]

[tex]\:\:\:\:\:\:\:=(1.6726×10^{-27}\:\text{kg})(2.9979×10^8\:\text{m/s})^2[/tex]

[tex]\:\:\:\:\:\:\:=1.5033×10^{-10}\:\text{J}[/tex]

Answer:

The speed of the car, v = 21.69 m/s

Explanation:

The diameter is  = 48.01 m

Therefore, the radius of the loop R = 24.005 m

Weight at the top is n = mv^2/R - mg

Since the apparent weight is equal to the real weight.

So, mv^2/R - mg = mg

v = √(2Rg)

v = √[2(24.005 m)(9.8 m/s^2)]

The speed of the car, v = 21.69 m/s

Answer:

The speed is 15.34 m/s.

Explanation:

Diameter, d = 48.01 m

Radius, R = 24.005 m

Let the speed is v and the mass is m.

Here, the weight of the car is balanced by the centripetal force.

According to the question

[tex]m g = \frac{mv^2}{R}\\\\v =\sqrt{24.005\times9.8}\\\\v = 15.34 m/s[/tex]

Answer:

Explanation:

First last of thermodynamics, just discusses the changes that a system is undergoing and the processes involved in it. It explains conservation of energy for a system undergoing changes or processes.

Second law of thermodynamics helps in defining the process and also the direction of the processes. It tells about the possibility of a process or the restriction of a process. It states that the entropy of a system always increases.

For this to occur the energy contained by a body has to diminish without converting to work or internal energy. So imagine a machine which works with less than efficiency, this means there are losses but they don’t show up anywhere. But the energy is obtained from a higher energy source to lower.

The easy way to do this is with an imaginary device that extracts zero-point energy to heat a quantity of gas. Energy is being created, so the first law is violated, and the entropy of the system is increasing as the gas heats up.

First law is violated since the energy conversion don't apply but the direction of work is applied so second law is satisfied.

Answer:

[tex]{ \bf{pythogras \: theorem :}} \\ \\ { \tt{ = \sqrt{ {9.6}^{2} + {18}^{2} } }} \\ = 20.4 \: cm[/tex]

Answer:

  T = 5.66 s

Explanation:

The system formed by the bar plus ball forms a physical pendulum

        w = [tex]\sqrt{mgd/I}[/tex]

the moment of inertia of a rod held at one end is

       I = [tex]\frac{1}{3}[/tex] m L²

we substitute

       w = [tex]\sqrt{\frac{d \ d}{ 3 L^2 } }[/tex]

in this case the turning distance and the length of the rod are equal

        d = L

        w = [tex]\sqrt{\frac{g}{3L} }[/tex]

angular velocity and period are related

       w = 2π / T

        2π / T = [tex]\sqrt{\frac{g}{3L} }[/tex]

        T = 2π [tex]\sqrt{3L/g}[/tex]

let's calculate

       T = 2π [tex]\sqrt{3 \ 2.65 / 9.8}[/tex]

       T = 5.66 s