There is a bell at the top of a tower that is 45m high. The bell weighs 190N. The bell has ___________________ energy. Calculate it.




I NEED THE ANSWER PLEASE

For 1000 seconds , a current of 0.1 A flows so as to transfer charge of 100C

Answer: 1200kg

Explanation:

KE = (1/2)mv^2

103kJ = 103000J

103000J = (1/2) * m * (13.1m/s)^2

Solve for m

A car has a kinetic energy of 103kJ, and the speed of the car is 13.1 m/s,then the mass of the car would have been 1200 kilograms.

Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total stored energy in the system which is represented by total potential energy.

A car has a kinetic energy of 103 kJ. The speed of the car is 13.1 m/s,

The kinetic energy of the car = 1/2 × mass × velocity

                                     103000 =0.5 × mass × (13.1) ²

The mass of the car = 1200 Kilogram

Thus, if a car has a kinetic energy of 103kJ, and the speed of the car is 13.1 m/s,then the mass of the car would have been 1200 kilograms.

To learn more about mechanical energy, refer to the link;

https://brainly.com/question/2409175

#SPJ5

Answer:

a

Explanation:

because it's need someone moving it so it can move somewhere else

Answer:

Mass = 52.63 kilograms

Explanation:

Given the following data;

Acceleration due to gravity = 3.8 m/s²

Weight = 200 N

To find mass;

Mathematically, the weight of a physical object is given by the formula;

Weight = mass * acceleration due to gravity

Substituting into the formula, we have;

200 = mass * 3.8

Mass = 200/3.8

Mass = 52.63 kg

Answer:

i. 2.5 kHz ii. 5 kHz

Explanation:

The frequency of the wave in the rod is given by f = nv/2L where n = harmonic, v = speed of sound in rod = 5000 m/s and L = length of rod = 1 m

i. f1

For f1, n = 1

f1 = 1 × v/2L

= v/2L

Substituting the values of the variables into the equation, we have

= 5000 m/s ÷ (2 × 1 m)

= 5000 m/s ÷ 2 m

= 2500 /s

= 2500 Hz

= 2.5 kHz

ii. f2

For f2, n = 2

f2 = 2 × v/2L

= v/L

Substituting the values of the variables into the equation, we have

= 5000 m/s ÷ 1 m  

= 5000 /s

= 5000 Hz

= 5 kHz

Answer:

It depends on the medium

Explanation:

2021 edge

The energy of a sound wave decreases as it travels through a medium to another medium. Thus, the correct option is D.

A sound wave is the pattern of disturbance which is caused by the energy which is travelling away from the source of the sound in that medium. Sound waves are the longitudinal waves. This means that the propagation of these vibration of particles is parallel to the energy which this wave propagation direction has. When the atoms in the medium are set in vibration then they move back and forth in a direction. This continuous to occur in back and forth motion resulting in a high-pressure and a low-pressure region in the medium and thus propagating sound.

Sound wave is the physical vibration wave which travel through the air to reach the ears of organisms. Sound energy is the result when force makes an object to vibrate. A wave can lose energy as it travels through a medium because the medium can also absorb the energy from the wave. The medium changes some of the acoustic energy of the sound wave into heat energy.

Therefore, the correct option is D.

Learn more about Sound wave here:

https://brainly.com/question/21995826

#SPJ2

Answer:

double Replacement

Explanation:

The mutual replacement of radical and ions between the two compounds or molecules is called double replacement.

General equation : AB+CD = AD +B

Answer:a gas at pressure of 0.8 m column of H g

Answer:

A

Explanation:

The plate collisions that occur in these areas can produce earthquakes, volcanic activity, and crustal deformation.

hope it helps you

Answer:

the power output P = 1484 W

Explanation:

Power P  = Force× speed

Given that motor of a battery-powered scooter can maintain a speed of 5.3 m/s by providing a force of 280 N.

Therefore,the power output of the motor P = 280×5.3 = 1484 W

Hence, the power output P = 1484 W

Answer:

A longitudinal study is a research design that involves repeated observations of the same variables over short or long periods of time. It is often a type of observational study, although they can also be structured as longitudinal randomized experiments.

Explanation:

Answer:

For Ryan:

[tex]at \: highest \: point : v = 0 \\ velocity = 0 \: {ms}^{ - 1} [/tex]

For the football kicked:

[tex]s = ut - \frac{1}{2} g {t}^{2} \\ for \: range : s = 0 \\ u \sin( \theta) = \frac{gt}{2} \\ t = \frac{2u \sin(\theta) }{g} \\ range(x) = ut \\ x = \frac{ {2u {}^{2} \sin(\theta) }^{} }{g} \\ \frac{50 \times 9.8}{ {2318.9}^{} } = \sin(\theta) \\ \\but \: 0 = u \sin(25) - 2 \times 9.8 \times 50 \\ u = 2318.9 \: {ms}^{ - 1} \\ \theta = 12.2 \degree[/tex]

Answer:

the highest point for the first question is 0 meters per second

the answer for question 2 is 45 degrees

Answer:

The displacement from point B to point E is 25.0 m left

Answer:

To decrease the current;

1) Use fewer loops or number of turns

2) Use a lower speed of rotation of the coil in the magnetic field

3) Use a weaker magnetic

Explanation:

According to Faraday's Law of induction, which is the basis of the electromagnetism, electromagnetic induction and therefore the basis of the  electric generator, can be written as follows;

[tex]\epsilon = -N \cdot \dfrac{\Delta \phi}{\Delta t}[/tex]

Where;

ε = The induced voltage

N = The number of turns (loops)

ΔФ = The change in the magnetic flux

Δt = The change in the time (the duration)

Given that voltage is directly related to the current, decreasing the voltage, decreases the current

To decrease the voltage, and therefore, the current we can;

1) Reduce the number of loops in the coil

2) Increase the time change per unit change in flux by slowing down the speed of rotation of the generator

3) Decrease the amount of change in the magnetic field per turn, by using a weaker magnetic

Answer:

Its B

Explanation:

a p e x

Answer: Create a hypothesis

Explanation:

From the information given, information has been gathered and the identification to ascertain if there's a change. Then, an hypothesis has to be created in order to know what the problem is.

One has to carry out some research in order to know what went wrong and should also validate the hypothesis by consulting with ones peers. By doing this, the most likely causes of the issues will be gotten.

Answer:

Explanation:

vf=0

vi = 17

a = -0.8

Δx = ?

vf^2 = vi^2 + 2 a Δx

Δx = (vf^2 - vi^2) / 2a

Δx = (0-17^2) / 2 (-0.8)

Δx = 180.625 m

Charge = 0.2 Ah is the correct answer...

Well, let's see what we've got here:

                    ( 4⁻³ · 3⁴ · 4² )  /  ( 3⁵ · 4⁻² ) .

The two simple rules of exponents that we're

going to use here are:

-- Two multiply two numbers with the same base,

add their exponents.    Like   (A³) · (A²) = A⁵ .

But the bases have to be the same.

-- A negative power just means it belongs in the

other section of a fraction.

  A negative power on top means it belongs on the bottom.

  A negative power on the bottom means it belongs on top.

  Like    A⁻²  means  1/A² .  And  1/B⁻³  means  B³ .

That's all you need in order to clean up the big fraction

in the question.  But in order to see where you can use

these rules, you need to re-arrange things first.

Original:                          ( 4⁻³ · 3⁴ · 4² )  /  ( 3⁵ · 4⁻² )

Let's send the  4⁻³

to the bottom

where it belongs:              (   --  3⁴ · 4² )  /  4³ · ( 3⁵ · 4⁻² )

Not take that  4⁻² from

the bottom, and put it on

top, where it belongs:       (  4² · 3⁴ · 4² )  /  4³ · ( 3⁵    -- )

Multiply the 4²s on top:     (  4⁴ · 3⁴       )  /  ( 4³ · 3⁵ )

Now let me break this up.

Not changing anything, just

writing it in a different way:      ( 4⁴  /  4³ ) · ( 3⁴ / 3⁵ )

Look at the first fraction:  4⁴ / 4³ .

Divide top and bottom by  4³ , and it becomes just  4 .

Now look at the second fraction:  3⁴ / 3⁵ .

Divide top and bottom by  3⁴ , and it becomes just  1/3 .

So in the end, we're left with just      4 / 3 .

And THAT is exactly equal to the original big messy fraction

in the question.  It has exactly the same numerical value, but

you'd never know it when you see it, because it's a lot simpler.

There are a lot of other ways we could have manipulated and

massaged the original fraction, but the steps are the same:

-- Multiply numbers with the same base, by adding the exponents.

-- Remember that a number with a negative exponent belongs

in the other section of the fraction, with a positive exponent.

Explanation:

Optics is a branch of physics that is the study of light and vision. ... The branch of physics dealing with the nature and properties of electromagnetic energy in the light spectrum and the phenomena of vision. In the broadest sense, optics deals with infrared light, visible light, and ultraviolet light.

Answer:

C

Explanation:

The correct answer should be the micrometer.

The micrometer is an instrument that is capable of measuring the component of an object to very high precision. It is used to obtain accurate measurements in engineering.

In the case of the copper wire, the diameter of 0.3 mm was an approximation and a more accurate measure of the diameter would be obtained by using the micrometer.

The correct option is C.

Answer:

B

A

Explanation:

please mark as brainliest :)

Complete question:

(b) How much energy must be supplied to boil 2kg of water? providing that the specific latent heat of vaporization of water is 330 kJ/kg. The initial temperature of the water is 20 ⁰C

Answer:

The energy that must be supplied to boil the given mass of the water is 672,000 J

Explanation:

Given;

mass of water, m = 2 kg

heat of vaporization of water, L =  330 kJ/kg

initial temperature of water, t = 20 ⁰C

specific heat capacity of water, c = 4200 J/kg⁰C

Assuming no mass of the water is lost through vaporization, the energy needed to boil the given water is calculated as;

Q = mc(100 - 20)

Q = 2 x 4200 x (80)  

Q = 672,000 J

Q = 672,000 J

Q = 672,000 J

Therefore, the energy that must be supplied to boil the given mass of the water is 672,000 J

Answer:

d

Explanation:

Answer:

B

Explanation:

Answer:

Explanation:

V = I * R

V = 4 * 12.1 = 48.4 v