There are two forces on the 2.00kg box in the overhead view of Fig., but only one is shown. For F 1​ =20.0N,a=12.0m/s 2, and θ=30.0 o, find the second force (a) in unit-vector notation and as (b) a magnitude and (c) an angle relative to the positive direction of the x axis.

Schedules of reinforcement farm workers are paid x amount of dollars for every basket of fruit that they pick is based on the concept of fixed ratio.

A strengthening timetable, during which an answer or reaction is only strengthened after yet another given reaction can be determined, could be determined as a fixed ratio schedule. The particular topic gives a variety of questionnaires/solutions and therefore is subsequently rewarded by the educator or coach.

The man is under a fixed interval schedule of reinforcement, while the woman is under a fixed ratio schedule of reinforcement. Fixed interval reinforcement is a type of reinforcement that gives reward only after a specific period of time has passed. A fixed ratio reinforcement is a type of reinforcement that is based on production rate.

The other type is variable ratio. Variable Ratio schedule of reinforcement will give a person rewards after he/she fulfil a specific amount of works.

To know more about Fixed Ratio:

https://brainly.com/question/4473263

#SPJ4

Answer: 16 Pounds.

To figure out how much YOU would weigh on the moon, take your weight and divide it by 6. So, if you weighed 100 pounds on Earth, you would weigh only about 16 pounds on the moon.

Earth satellite whose height is 35786 km them the distance velocity is 11,300 km/h.

Satellite is defined as a piece of technology that is launched into space and orbits the earth or another planet with a specific purpose. An object that orbits a larger object can be referred to as a satellite.

The equation for estimating the speed for the orbital velocity of a satellite is derived using the centripetal force and gravitation equations. The spacecraft would need to maintain a velocity of roughly 11,300 km/h in order to complete one orbit of the earth, which is located nearly 35,786 km above the surface of the planet.

Thus, earth satellite whose height is 35786 km them the distance velocity is 11,300 km/h.

To learn more about satellite, refer to the link below:

https://brainly.com/question/9266911

#SPJ1

If an object producing sound is moving away from us, the wavelength of the sound heard is longer than the actual wavelength. The conclusion is from the concept of Doppler effect.

The Doppler's effect is a phenomenon when the source of a wave and an observer move relative to each other, the frequency heard is not the same with the actual frequency.

The equation of the Doppler effect is

f₀ = [(v ± v₀)/(v ± vs)] × fs

Where

Note:

When an object producing sound is moving away from us, the frequency of the sound we heard changed.

Let's say we are at rest, it means v₀ = 0. The sound source is moving away makes vs (+).

With the Doppler's effect, we get

f₀ = [(v+0) / (v+vs)] × fs

f₀/fs = v/(v+vs)

v < v+vs

f₀ < fs

The frequency of sound we heard is lower that the actual frequency.

The wavelength is inversely proportional to the frequency. It is described in the equation:

λ = c/f

It means that the lower the frequency, the longer the wavelength.

Hence, the phenomenon which the wavelength of the sound we heard is longer than the actual wavelength when the sound source is moving away from us is called the Doppler's effect.

Here is the group of answer choices:

(a) Band width

(b) Doppler's effect

(c) Sound refraction

(d) Vibrations

Learn more about Doppler's effect here:

https://brainly.com/question/29672712

#SPJ4

Planets exert gravitational tugs on their stars that cause stars to orbit around the center of mass of their planetary systems. is true

The complete questio is Which one makes it possible to learn of the existence of extrasolar planets without seeing the planets themselves?

To learn more about Extrasolar planets refer to:

https://brainly.com/question/1514493

#SPJ1

Since light is faster in space, it takes less time for light to travel a distance of 1000m, a time difference of 0.977ns.

Light travels more slowly in a transparent medium than in the vacuum of empty space. The speed of light in any medium (air, water, glass) is determined by the refractive index of the medium. However, this exponent itself may be wavelength dependent (ie different colored rays travel at different speeds). In fact, this is why a prism splits white light into the colors of the rainbow.

The main reason that a light beam slows down in a medium has to do with the fact that the photons, or 'raw light beams', are excited by an electromagnetic field. When the field is in the ground state (vacuum), these excitations actually propagate at the vacuum speed of light. However, when there are positively charged atoms and negatively charged electrons, the electromagnetic field does not go to the ground state. There are many virtual photons. Yes, some of the photons of the passing light beam can be absorbed. After all, no material is completely transparent. But even those who aren't are moving in an environment so different from the vacuum that their paths will be different. It also depends on the structure that the molecule forms.

Learn more about light here:

https://brainly.com/question/19697218

#SPJ4

Correct answer:-  (a) grief

Sorrow, hurt, anger, guilt, confusion, and other feelings that arise after suffering a loss are reflected in grief.

Regardless of whether someone's sadness is caused by the loss of a loved one or by receiving a terminal illness, grief is a powerful, perhaps overwhelming feeling for people.

What is the duration of grief?

Grieving typically lasts for a year or longer. The individual in grieving must deal with the emotional and life changes brought on by the loss of a loved one. It's normal to feel emotionally attached to the deceased for a very long time after they have passed away, even though the anguish may eventually lessen.

Grieving typically lasts for a year or longer. The individual in grieving must deal with the emotional and life changes brought on by the loss of a loved one. It's normal to feel emotionally attached to the deceased for a very long time after they have passed away, even though the anguish may eventually lessen.

To know more about distress click:

https://brainly.com/question/792604

#SPJ4

A heat engine, symbolized by a circle in this illustration, uses some of the heat transfer to produce work.

The most effective heat engine that is theoretically possible—i.e., any machine that can transform thermal energy (heating) into mechanical energy—is the Carnot engine (work).The heat and cold reservoirs are the names given to the hot and cold items. Only the hot temperatures' absolute values affect efficiency. A portion of the heat QH that is extracted from the high-temperature source TH in the case of a heat engine is transformed into work. The ratio of net work completed to heat absorbed throughout one full cycle is known as a heat engine's thermal efficiency.

to know more about heat engine please visit.

https://brainly.com/question/13155544

#SPJ4

1 drink(s) within a 4-hour time span regardless of the height and weight can get you a BAC of .01%.

Even one drink of alcohol can impair your ability to drive. Having more than one drink in his bloodstream puts him in danger and could get him arrested. Failure to pay this will result in a fine of 10% of the service tax. No penalty if service tax and interest are paid within 30 days after the notice is served.

Usually, you can apply the one-drink-an-hour rule without hesitation. So if you have two glasses of wine, you have to wait two hours before going out. Drinking one cup for an hour will give your body time to overcome the other factors above and hopefully bring you to a safe enough alcohol level to drive.

Learn more about A BAC here:- https://brainly.com/question/2231540

#SPJ4

0.025 N the force of the string on the toy, at the other end of the rope.

Friction is a force that resists the relative motion of two objects that are in contact with each other. It is caused by the interaction of the surfaces of the two objects and the molecules that make them up. Friction can be either static or kinetic. Static friction occurs when the two surfaces are not moving relative to each other, while kinetic friction occurs when the two surfaces are moving relative to each other. Friction is a type of force that can be both beneficial and detrimental.

Mass of the string (m)  = 10 grams or 10⁻² kg

Mass of the toy (M) = 50 g or 5 x10⁻² kg

Mass of the system = M + m

= 10⁻² + 5 x 10⁻²

= 6 x 10⁻²  kg

Force applied (F) = 3.0 x 10⁻² N

Acceleration of toy + string = (0.03/6) x 10⁻²

= 0.5m/s²

Thus force on the toy = 5 x10⁻² x 0.5

= 0.025 N

To learn more about friction
https://brainly.com/question/24338873
#SPJ4

The complete question is as follows:

A short 10g string is used to pull a 50g toy across a frictionless horizontal surface. if a 0.03N force is applied horizontally to the free end, the force of the string on the toy, at the other end, is:

The speed of the block after it has descended is 3 meters is 3.54 m/s.

To determine the speed of the block after it has descended 3 meters, we need to consider the energy conservation principle. The initial potential energy of the block is equal to the final kinetic energy of the block plus the work done on the block by the pulleys.

The initial potential energy of the block is given by:

U = mgh

where m is the mass of the block, g is the acceleration due to gravity, and h is the height of the block.

The final kinetic energy of the block is given by:

K = (1/2) × m × v²

where m is the mass of the block and v is the velocity of the block.

The work done on the block by the pulleys is given by:

W = F × d

where F is the force exerted on the block by the pulleys and d is the distance traveled by the block.

The force exerted on the block by the pulleys is equal to the tension in the rope. The tension in the rope can be calculated using the following formula:

T = (m × g) / (1 + (Ia/Ib))

where T is the tension in the rope, m is the mass of the block, g is the acceleration due to gravity, Ia is the moment of inertia of pulley A, and Ib.

where I is the moment of inertia, m is the mass of the pulley, and r is the radius of the pulley.

Substituting the given values into the formulas above, we get:

U = 5 × 9.81 × 3 = 146.1 J.

Ia = (1/2) × 15 × (77)² = 70,245 [tex]mm^4[/tex]

Ib = (1/2) × 3 × (31)² = 2,871 [tex]mm^4[/tex]

T = (5 × 9.81) / (1 + (70,245/2,871)) = 33.4 N

W = T × 3 = 100.2 J

K = (1/2) × 5 × v²

Substituting the values for U, W, and K into the energy conservation equation, we get:

146.1 J = 100.2 J + (1/2) × 5 × v²

v² = (146.1 J - 100.2 J) / (1/2) × 5

v² = 45.9 J / 2.5

v = √(45.9 J / 2.5) = 3.54 m/s

Therefore, the speed of the block after it has descended 3 meters is approximately 3.54 m/s, rounded to two decimal places.

Learn more about the speed at

https://brainly.com/question/23403913

#SPJ4

An expression for the minimum launch speed needed for the object to escape gravity, i.. to be able to just reach v=M(2GMR )  The minimum launch speed is V = 0.08 × 10¹¹ J.

A property of a body that is a measure of inertia is usually viewed as a measure of the amount of matter contained in the body that causes it to have weight in a gravitational field. Mass is a dimensionless quantity that describes the amount of matter in a particle or object.

Calculation:-

minimum launch speed

M = 7 x 1024kg

R = 82 102

v=M(2GMR )

v =  2 * 6.67 10-11 * 7 * 1024

v = 0.08 × 10¹¹ J.

The mass of an object is a measure of its inertial properties or the amount of matter it contains. The weight of an object is a measure of the force exerted on it by gravity, or the force required to support it. Mass can best be understood as the amount of matter present in an object or body. Everything around us has mass.

Learn more about A mass here:- https://brainly.com/question/19385703

#SPJ4

The force of gravity acting on the 23 Kg object in the diagram is 225.4 N

The force of gravity is defined as follow:

Force of gravity (F) = mass (m) × acceleration due to gravity (g)

Using the above formula, we can easily obtain the force gravity acting on the 23 Kg object. This is shown below:

Force of gravity (F) = mass (m) × acceleration due to gravity (g)

Force of gravity = 23 Kg × 9.8 m/s²

Force of gravity = 225.4 N

Thus, from the calculation made above, we can conclude that the gravitaional force is 225.4 N

Learn more about force:

https://brainly.com/question/12163222

#SPJ1

A reaction with a known q, such as a measured amount of benzoic acid ignited by a spark from a nickel fuse wire that is weighed before and after the reaction, is used to calibrate bomb calorimeters.

By releasing a known amount of thermal energy through an electric heater and measuring the subsequent rise in temperature, the calorimeter is calibrated. The energy released when a certain amount (for example, 1 mol, 1 g, or 1 L) of a substance burns entirely in oxygen is known as the heat of combustion.

A typical standard used in Bomb calorimeters, which keep a constant volume, is benzoic acid. If. Burning 1.2 g of benzoic acid at a temperature of 24 degrees, with excess oxygen present, releases 31.723 J of energy.

When calibrating CALORIMETERS, a known electric current is frequently generated inside of them, and the measuring device is then watched for deflection while the system is in a steady condition. Heat loss along the leads through which the calibrating current is injected could be a drawback for this procedure.

Learn more about Benzoic acid here:

brainly.com/question/24052816

#SPJ1

Whenever the gases are heated at a fixed volume, no outside work is done as well as the heat energy given is simply used to make the gas more energetic internally.

The specific heat under constant pressure for an ideal gas, Cp, is higher than Cv.This is due to the fact that when the gas' temperature rises while the pressure stays constant, the gas must perform some finite work on its surroundings.

When the goal value and the specification's average are equal, Cpk equals Cp.Never can Cpk go above Cp.With the creation of descriptive statistic displays and histograms, Cp and Cpk can both be determined.

To know more about specific heat visit:

https://brainly.com/question/11297584

#SPJ4

D) The Sun's evolution from youngest to the oldest stage is protostar, main-sequence, red giant, a white dwarf.

A protostar is the very beginning stage of a star's life. It is a cloud of gas and dust that starts to collapse due to its own gravitational pull. As it collapses, the gas and dust heat up, and eventually, nuclear fusion begins, creating a star.

The main-sequence stage is the longest and most stable period of a star's life. During this stage, the star is converting hydrogen into helium in its core, producing energy and light. This stage can last for billions of years.

Once a star has used up its hydrogen fuel, it enters the red giant phase. This is when the star expands, becoming much larger and much brighter. The star is now converting helium into other elements in its core, such as carbon and oxygen.

For more questions like Sun's evolution click the link below:

https://brainly.com/question/29183349

#SPJ4

Step 1: Calculate the ratio of the final and beginning temperatures using the ideal gas law solved for temperature.

Step 2: Calculate the ratio after eliminating any constant values.

Step 3:Solve for the final temperature after substituting the beginning temperature into the ratio.

PV= nRT

However, for this method to work properly, the temperature must be stated in Kelvin. This is true because Kelvin's zero point is absolute zero. Theoretically, molecules are entirely immobile at 0 Kelvin.

T = PV/nR

The ideal gas law equivalency is used to compute the final temperature in the next two issues.

To know more about temperature

https://brainly.com/question/22542167

#SPJ4

The two level portions in the graph represented phase changes.

What are phase changes?

The transition of matter from one state (solid, liquid, gas, or plasma) to another is referred to as a phase change.  These changes also take place when the pressure on the system varies, as well as when the system receives enough energy or loses enough energy.

The slope of the line dividing two phases is determined by the relative densities of the two phases. The solid-liquid line, for instance, slopes up and to the right if the liquid is less dense than the solid, whereas up and to the left if the liquid is denser than the solid.

Therefore the two level portions in the graph represented phase changes.

To know phase changes from the given link

https://brainly.com/question/24858284

#SPJ1

The forces the truck and car exert on each other must be internal to the truck-car system because the momentum of the center of mass of the truck-car system stays the same. Option D

We know that it is possible for an object to be able to bump into another object when this occurs, we would have to apply the law of the conservation of linear momentum. Recall that from the law of the conservation of linear momentum, momentum before collision is equal to the momentum after collision.

We would also have to consider the fact that the weight of the truck is much lager than the weight of the car. The forces that the two vehicles would exert on each other can not be the same. It is clear that the truck is going to exert more force than the car.

With that said, we must have in mind that the total momentum of the system does not change because we are going to approximate the system to function as a closed system.

Learn more about momentum:https://brainly.com/question/24030570

#SPJ1

The magnetic field inside the cylinder is zero and outside the cylinder is

B = μ₀ I/(2*π*r)

The circulation of the magnetic field along a circular path of radius, r , is given by:

⇒ B cosθ (2* π* r)

where,  cos θ  is  1  if the field forms circles. Now that the Amperian loop is closed, we may analyze the current inside of it. The net current that travels across the surface defined by the Amperian loop determines the enclosed current. The enclosed current is denoted by the letter I since the loop completely encloses the wire. Making use of Ampere's Law,

B cosθ (2* π* r) = μ₀ I

Since, the right-hand side of the equation is not zero at this moment, it is obvious that cos cannot be zero. As a result, we can draw the conclusion that, as we had previously predicted, the magnetic field must form concentric rings. The magnetic field's strength is determined by:

B = μ₀ I/(2*π*r)

To know more about magnetic field:

https://brainly.com/question/13150948

#SPJ4

Important Formula:

[tex]s=\dfrac{d}{t}[/tex]

__________________________________________________________

[tex]d=85m[/tex] (measured in meters)

[tex]t=13s[/tex] (measured in seconds)

[tex]s=?[/tex] (measured in meters per second; m/s)

__________________________________________________________

[tex]s=\dfrac{d}{t}[/tex]

[tex]s=\dfrac{85}{13}[/tex]

__________________________________________________________

[tex]\fbox{6.54 m/s},\fbox{Option C}[/tex]

Main Answer:

The distance of L is [tex]v^{2} /2g(sin\alpha +ucos\alpha )[/tex]

Explanation:

if the block will slide a distance 'L' then syoped;

The initial velocity given to the block is V m/s

So, Total K.E given will goes to gain in potential energy and work done by friction .

K.E=1/2mv^2

P.E at hight (Lsin[tex]\alpha[/tex]) will be = mgh

And work done by the Friction Force is given as = w.r = force*displacement= - uNL= -uMgGcos[tex]\alpha[/tex]L

so,

KE+WD by friction = gain in P.E

[tex]1/2mv^{2} +(-uMgGcos\alpha L)=MgLsin\alpha \\1/2V^{2} =glsin\alpha +uglcso\alpha \\v^{2} /2= Gl(sin\alpha +ucos\alpha )[/tex]

Hence by solving we get :

[tex]v^{2} /2g(sin\alpha +ucos\alpha )[/tex]=L

So the distance = L

To learn more about Distance related problems click here:

https://brainly.in/question/7737285

#SPJ4

If wire loop is being pulled to the right with a constant velocity of 3 meters per second , then the potential difference induced between points X and Y is 3V .

it is given that a 5Ω resistor is connected between points X and Y ;

the magnetic field (B) = 0.5 ;

length of wire (l) [tex]=[/tex] 2 ;

velocity of the wire loop (v) = 3 m/s ;

the potential difference will be induced because charge separation on the vertical hand wire of wire loop.

Points X and Y are the same as the top and bottom of left wire.

The EMF(potential difference) induced in wire is given by

EMF = B*l*v

substituting the values ,

we get  

= (0.5)(2)(3) = 3V

Therefore , the induced potential difference between points X and Y is 3V .

The given question is incomplete , the complete question is

A wire loop, 2 meters by 4 meters, of negligible resistance is in the plane of the page with its left end in a uniform 0.5-tesla magnetic field directed into the page. A 5-ohm resistor is connected between points X and Y. The field is zero outside the region enclosed by the dashed lines. The loop is being pulled to the right with a constant velocity of 3 meters per second. Make all determinations for the time that the left end of the loop is still in the field, and points X and Y are not in the field.

Determine the potential difference induced between points X and Y.

Learn more about Magnetic Field here

https://brainly.com/question/27679280

#SPJ4

Answer:

According to Newton's second law of motion, the acceleration of an object equals the net force acting on it divided by its mass, or a = F m .

Explanation:

The fraction of its final impact speed is 1/√2.

Impact speed is the speed of the vehicle at the time of impact or collision.

The rock has lost half of its gravitational potential energy, its kinetic energy at the halfway point is half of its kinetic energy at impact.

As we know kinetic energy is directly proportional to mass (m) and velocity square (v²),

KE ∝ v²

KE = (1/2)mv²

then K.E at halfway point is equal to 1/2 x K.E,

Then,

The K.E at impact, then the rock’s speed at the halfway point its speed at impact will be 1/√2 its impact speed.

Therefore option D is the correct answer, the fraction of its final impact speed is 1/√2.

To know more about impact speed,

https://brainly.com/question/13163464

#SPJ4

The coefficient of static friction between feet and ground is 0.2522.

Static friction is defined as when there is no motion between the two surfaces, the force that one surface applies to another. The friction that exists between two or more objects when they are not moving relative to one another is referred to as static friction.

The coefficient of static friction between his feet and the ground, denoted by the symbol s, determines how to express the frictional force as

fs =μsFN1

The μs can be calculated as

μs = a / √L² - a² x d / L

μs = 0.945 / √(1.95)² - (0.945)² x 0.89 / 1.95

μs = 0.945 / √2.91225 x 0.89 / 1.95

μs = 0.2522

Thus, the coefficient of static friction between feet and ground is 0.2522.

To learn more about static friction, refer to the link below:

https://brainly.com/question/13000653

#SPJ1

The centripetal acceleration of the mass m when it is at the lowest position is 10 m/s². The correct option is A.

Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any object moving in a circle with an acceleration vector pointing in the direction of the circle's center.

A projectile is an object that is launched into the air and then moves only in response to the acceleration of gravity. The trajectory of the object is referred to as the projectile's trajectory.

The equation of projectile motion is:

[tex]V = \sqrt{2gh}\\\\\\V = \sqrt{2 \times 10 \times \dfrac{1}{2} } \\\\V = \sqrt{20}[/tex]

a² = v² / l  = 20 / 2 = 10 m/s²

Therefore, the correct option is A, 10 m/s².

To learn more about centripetal acceleration, refer to the below link:

https://brainly.com/question/14465119

#SPJ1

The question is incomplete. Your most probably complete question is given below:

The centripetal acceleration of the mass m when it is at the lowest position is:

10 m/s²

5 m/s²

20 m/s²

25 m/s²

The average frequency will be 465.5 Hz.

The frequency of light can be described as the number of waves passing through a point in a medium (or vacuum) per second.

Frequency generated by generator 1 = f1 = 460 Hz

Frequency produced by generator 2 = f2 = 471 Hz

the average frequency will be (f1 + f2) / 2

f1 + f2 = 460 + 471

f1 + f2 = 931 Hz

Average frequency = A = 931/2

A = 465.5 Hz

The average frequency we hear will be 465.5 Hz.

To know more about frequency,

https://brainly.com/question/14435324

#SPJ4